summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/misc/eeprom/Kconfig12
-rw-r--r--drivers/misc/eeprom/Makefile1
-rw-r--r--drivers/misc/eeprom/digsy_mtc_eeprom.c85
3 files changed, 98 insertions, 0 deletions
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 620de283b40b..26cf12ca7f50 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -83,4 +83,16 @@ config EEPROM_93XX46
If unsure, say N.
+config EEPROM_DIGSY_MTC_CFG
+ bool "DigsyMTC display configuration EEPROMs device"
+ depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+ help
+ This option enables access to display configuration EEPROMs
+ on digsy_mtc board. You have to additionally select Microwire
+ EEPROM 93XX46 driver. sysfs entries will be created for that
+ EEPROM allowing to read/write the configuration data or to
+ erase the whole EEPROM.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index ec55aad24cfb..fc1e81d29267 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
obj-$(CONFIG_EEPROM_MAX6875) += max6875.o
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o
+obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o
diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
new file mode 100644
index 000000000000..66d9e1baeae5
--- /dev/null
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -0,0 +1,85 @@
+/*
+ * EEPROMs access control driver for display configuration EEPROMs
+ * on DigsyMTC board.
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/eeprom_93xx46.h>
+
+#define GPIO_EEPROM_CLK 216
+#define GPIO_EEPROM_CS 210
+#define GPIO_EEPROM_DI 217
+#define GPIO_EEPROM_DO 249
+#define GPIO_EEPROM_OE 255
+#define EE_SPI_BUS_NUM 1
+
+static void digsy_mtc_op_prepare(void *p)
+{
+ /* enable */
+ gpio_set_value(GPIO_EEPROM_OE, 0);
+}
+
+static void digsy_mtc_op_finish(void *p)
+{
+ /* disable */
+ gpio_set_value(GPIO_EEPROM_OE, 1);
+}
+
+struct eeprom_93xx46_platform_data digsy_mtc_eeprom_data = {
+ .flags = EE_ADDR8,
+ .prepare = digsy_mtc_op_prepare,
+ .finish = digsy_mtc_op_finish,
+};
+
+static struct spi_gpio_platform_data eeprom_spi_gpio_data = {
+ .sck = GPIO_EEPROM_CLK,
+ .mosi = GPIO_EEPROM_DI,
+ .miso = GPIO_EEPROM_DO,
+ .num_chipselect = 1,
+};
+
+static struct platform_device digsy_mtc_eeprom = {
+ .name = "spi_gpio",
+ .id = EE_SPI_BUS_NUM,
+ .dev = {
+ .platform_data = &eeprom_spi_gpio_data,
+ },
+};
+
+static struct spi_board_info digsy_mtc_eeprom_info[] __initdata = {
+ {
+ .modalias = "93xx46",
+ .max_speed_hz = 1000000,
+ .bus_num = EE_SPI_BUS_NUM,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .controller_data = (void *)GPIO_EEPROM_CS,
+ .platform_data = &digsy_mtc_eeprom_data,
+ },
+};
+
+static int __init digsy_mtc_eeprom_devices_init(void)
+{
+ int ret;
+
+ ret = gpio_request_one(GPIO_EEPROM_OE, GPIOF_OUT_INIT_HIGH,
+ "93xx46 EEPROMs OE");
+ if (ret) {
+ pr_err("can't request gpio %d\n", GPIO_EEPROM_OE);
+ return ret;
+ }
+ spi_register_board_info(digsy_mtc_eeprom_info,
+ ARRAY_SIZE(digsy_mtc_eeprom_info));
+ return platform_device_register(&digsy_mtc_eeprom);
+}
+device_initcall(digsy_mtc_eeprom_devices_init);