diff options
46 files changed, 44 insertions, 72 deletions
@@ -1229,7 +1229,7 @@ E: philip@gladstonefamily.net D: Kernel / timekeeping stuff S: Carlisle, MA 01741 S: USA - + N: Jan-Benedict Glaw E: jbglaw@lug-owl.de D: SRM environment driver (for Alpha systems) @@ -2560,7 +2560,7 @@ S: 22 Seaview St S: Fullarton 5063 S: South Australia -N. Wolfgang Muees +N: Wolfgang Muees E: wolfgang@iksw-muees.de D: Auerswald USB driver diff --git a/Documentation/filesystems/hfsplus.txt b/Documentation/filesystems/hfsplus.txt index af1628a1061c..59f7569fc9ed 100644 --- a/Documentation/filesystems/hfsplus.txt +++ b/Documentation/filesystems/hfsplus.txt @@ -56,4 +56,4 @@ References kernel source: <file:fs/hfsplus> -Apple Technote 1150 http://developer.apple.com/technotes/tn/tn1150.html +Apple Technote 1150 https://developer.apple.com/legacy/library/technotes/tn/tn1150.html diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 9be30c8cb0c2..75de197a2fef 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -356,7 +356,6 @@ config ARC_CURR_IN_REG config ARC_MISALIGN_ACCESS bool "Emulate unaligned memory access (userspace only)" - default N select SYSCTL_ARCH_UNALIGN_NO_WARN select SYSCTL_ARCH_UNALIGN_ALLOW help diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 6792503aaf79..15a9ed1d579c 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -11,7 +11,6 @@ config ETRAX_ETHERNET config ETRAX_NO_PHY bool "PHY not present" depends on ETRAX_ETHERNET - default N help This option disables all MDIO communication with an ethernet transceiver connected to the MII interface. This option shall @@ -116,7 +115,6 @@ config ETRAX_AXISFLASHMAP config ETRAX_AXISFLASHMAP_MTD0WHOLE bool "MTD0 is whole boot flash device" depends on ETRAX_AXISFLASHMAP - default N help When this option is not set, mtd0 refers to the first partition on the boot flash device. When set, mtd0 refers to the whole diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h index d42625053c37..096339207764 100644 --- a/arch/s390/include/asm/cio.h +++ b/arch/s390/include/asm/cio.h @@ -199,7 +199,7 @@ struct esw_eadm { /** * struct irb - interruption response block * @scsw: subchannel status word - * @esw: extened status word + * @esw: extended status word * @ecw: extended control word * * The irb that is handed to the device driver when an interrupt occurs. For diff --git a/block/blk-core.c b/block/blk-core.c index 853f92749202..4db2b32b70e0 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1929,7 +1929,7 @@ EXPORT_SYMBOL(submit_bio); * in some cases below, so export this function. * Request stacking drivers like request-based dm may change the queue * limits while requests are in the queue (e.g. dm's table swapping). - * Such request stacking drivers should check those requests agaist + * Such request stacking drivers should check those requests against * the new queue limits again when they dispatch those requests, * although such checkings are also done against the old queue limits * when submitting requests. diff --git a/block/blk-map.c b/block/blk-map.c index ae4ae1047fd9..cca6356d216d 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -285,7 +285,7 @@ EXPORT_SYMBOL(blk_rq_unmap_user); * * Description: * Data will be mapped directly if possible. Otherwise a bounce - * buffer is used. Can be called multple times to append multple + * buffer is used. Can be called multiple times to append multiple * buffers. */ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf, diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 1a3dbd1b196e..a440958d34e4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1524,7 +1524,7 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc) * @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result * @cdb: CDB for packet command - * @dma_dir: Data tranfer direction of the command + * @dma_dir: Data transfer direction of the command * @sgl: sg list for the data buffer of the command * @n_elem: Number of sg entries * @timeout: Timeout in msecs (0 for default) @@ -1712,7 +1712,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, * @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result * @cdb: CDB for packet command - * @dma_dir: Data tranfer direction of the command + * @dma_dir: Data transfer direction of the command * @buf: Data buffer of the command * @buflen: Length of data buffer * @timeout: Timeout in msecs (0 for default) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 59dc8086e4fa..83e910a57563 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -1218,7 +1218,7 @@ err_dev: * with the name of the subsystem. The root device can carry subsystem- * wide attributes. All registered devices are below this single root * device and are named after the subsystem with a simple enumeration - * number appended. The registered devices are not explicitely named; + * number appended. The registered devices are not explicitly named; * only 'id' in the device needs to be set. * * Do not use this interface for anything new, it exists for compatibility diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index ea92b827e787..f7a81209beb3 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -564,7 +564,7 @@ drm_crtc_helper_disable(struct drm_crtc *crtc) * Caller must hold mode config lock. * * Setup a new configuration, provided by the upper layers (either an ioctl call - * from userspace or internally e.g. from the fbdev suppport code) in @set, and + * from userspace or internally e.g. from the fbdev support code) in @set, and * enable it. This is the main helper functions for drivers that implement * kernel mode setting with the crtc helper functions and the assorted * ->prepare(), ->modeset() and ->commit() helper callbacks. diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c index a70aa555bbff..e7409c45bdd0 100644 --- a/drivers/input/sparse-keymap.c +++ b/drivers/input/sparse-keymap.c @@ -236,7 +236,7 @@ EXPORT_SYMBOL(sparse_keymap_setup); * in an input device that was set up by sparse_keymap_setup(). * NOTE: It is safe to cal this function while input device is * still registered (however the drivers should care not to try to - * use freed keymap and thus have to shut off interrups/polling + * use freed keymap and thus have to shut off interrupts/polling * before freeing the keymap). */ void sparse_keymap_free(struct input_dev *dev) diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig index e42b331edbc6..462a5b1d8651 100644 --- a/drivers/misc/mic/Kconfig +++ b/drivers/misc/mic/Kconfig @@ -4,7 +4,6 @@ config INTEL_MIC_HOST tristate "Intel MIC Host Driver" depends on 64BIT && PCI && X86 select VHOST_RING - default N help This enables Host Driver support for the Intel Many Integrated Core (MIC) family of PCIe form factor coprocessor devices that @@ -25,7 +24,6 @@ config INTEL_MIC_CARD tristate "Intel MIC Card Driver" depends on 64BIT && X86 select VIRTIO - default N help This enables card driver support for the Intel Many Integrated Core (MIC) device family. The card driver communicates shutdown/ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index f58db453a97e..08726177a3eb 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -585,7 +585,7 @@ static int ixgbe_fcoe_dma_pool_alloc(struct ixgbe_fcoe *fcoe, struct dma_pool *pool; char pool_name[32]; - snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%d", cpu); + snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%u", cpu); pool = dma_pool_create(pool_name, dev, IXGBE_FCPTR_MAX, IXGBE_FCPTR_ALIGN, PAGE_SIZE); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 16a309e5c024..8bd5cbf3aafb 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2141,7 +2141,7 @@ EXPORT_SYMBOL_GPL(regulator_is_enabled); * @regulator: regulator source * * Returns positive if the regulator driver backing the source/client - * can change its voltage, false otherwise. Usefull for detecting fixed + * can change its voltage, false otherwise. Useful for detecting fixed * or dummy regulators and disabling voltage change logic in the client * driver. */ diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index fd8ffe6bcfdd..0102a2d70dd8 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1225,7 +1225,7 @@ struct bus_type iscsi_flashnode_bus = { * Adds a sysfs entry for the flashnode session attributes * * Returns: - * pointer to allocated flashnode sess on sucess + * pointer to allocated flashnode sess on success * %NULL on failure */ struct iscsi_bus_flash_session * @@ -1423,7 +1423,7 @@ static int iscsi_iter_destroy_flashnode_conn_fn(struct device *dev, void *data) } /** - * iscsi_destroy_flashnode_sess - destory flashnode session entry + * iscsi_destroy_flashnode_sess - destroy flashnode session entry * @fnode_sess: pointer to flashnode session entry to be destroyed * * Deletes the flashnode session entry and all children flashnode connection @@ -1453,7 +1453,7 @@ static int iscsi_iter_destroy_flashnode_fn(struct device *dev, void *data) } /** - * iscsi_destroy_all_flashnode - destory all flashnode session entries + * iscsi_destroy_all_flashnode - destroy all flashnode session entries * @shost: pointer to host data * * Destroys all the flashnode session entries and all corresponding children diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index b91c758883bf..b6b869261f32 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -2,7 +2,6 @@ menu "Android" config ANDROID bool "Android Drivers" - default N ---help--- Enable support for various drivers needed on the Android platform @@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO config ANDROID_LOW_MEMORY_KILLER bool "Android Low Memory Killer" - default N ---help--- Registers processes to be killed when memory is low diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig index 83c9752504d4..8acf4b24a7c9 100644 --- a/drivers/staging/bcm/Kconfig +++ b/drivers/staging/bcm/Kconfig @@ -1,7 +1,6 @@ config BCM_WIMAX tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support" depends on USB && NET - default N help This is an experimental driver for the Beceem WIMAX chipset used by Sprint 4G. diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig index 7121853bd397..4da290b2f5bd 100644 --- a/drivers/staging/frontier/Kconfig +++ b/drivers/staging/frontier/Kconfig @@ -1,6 +1,5 @@ config TRANZPORT tristate "Frontier Tranzport and Alphatrack support" depends on USB - default N ---help--- Enable support for the Frontier Tranzport and Alphatrack devices. diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig index 04bd0fba7b1f..95a3af644a92 100644 --- a/drivers/staging/media/go7007/Kconfig +++ b/drivers/staging/media/go7007/Kconfig @@ -13,7 +13,6 @@ config VIDEO_GO7007 select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT - default N ---help--- This is a video4linux driver for the WIS GO7007 MPEG encoder chip. @@ -24,7 +23,6 @@ config VIDEO_GO7007 config VIDEO_GO7007_USB tristate "WIS GO7007 USB support" depends on VIDEO_GO7007 && USB - default N ---help--- This is a video4linux driver for the WIS GO7007 MPEG encoder chip over USB. @@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER config VIDEO_GO7007_USB_S2250_BOARD tristate "Sensoray 2250/2251 support" depends on VIDEO_GO7007_USB && USB - default N ---help--- This is a video4linux driver for the Sensoray 2250/2251 device. diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig index 3162aabbeb07..ff8d41ebca36 100644 --- a/drivers/staging/rtl8187se/Kconfig +++ b/drivers/staging/rtl8187se/Kconfig @@ -6,6 +6,5 @@ config R8187SE select WEXT_PRIV select EEPROM_93CX6 select CRYPTO - default N ---help--- If built as a module, it will be called r8187se.ko. diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig index c9c548f17494..70fecfabc0c7 100644 --- a/drivers/staging/rtl8188eu/Kconfig +++ b/drivers/staging/rtl8188eu/Kconfig @@ -3,7 +3,6 @@ config R8188EU depends on WLAN && USB select WIRELESS_EXT select WEXT_PRIV - default N ---help--- This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N. If built as a module, it will be called r8188eu. diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig index 50e0d91a409a..ad82bc348a75 100644 --- a/drivers/staging/rtl8192e/rtl8192e/Kconfig +++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig @@ -5,5 +5,4 @@ config RTL8192E select WIRELESS_EXT select WEXT_PRIV select CRYPTO - default N ---help--- diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig index 3f055091b35f..3ee9d0d00fb6 100644 --- a/drivers/staging/rtl8192u/Kconfig +++ b/drivers/staging/rtl8192u/Kconfig @@ -5,5 +5,4 @@ config RTL8192U select WIRELESS_EXT select WEXT_PRIV select CRYPTO - default N ---help--- diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig index 6a43312380e0..f160eee52f09 100644 --- a/drivers/staging/rtl8712/Kconfig +++ b/drivers/staging/rtl8712/Kconfig @@ -4,7 +4,6 @@ config R8712U select WIRELESS_EXT select WEXT_PRIV select FW_LOADER - default N ---help--- This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130. If built as a module, it will be called r8712u. @@ -12,7 +11,6 @@ config R8712U config R8712_TX_AGGR bool "Realtek RTL8712U Transmit Aggregation code" depends on R8712U && BROKEN - default N ---help--- This option provides transmit aggregation for the Realtek RTL8712 USB device. diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig index 886000980474..bd99e9e47e50 100644 --- a/drivers/staging/usbip/Kconfig +++ b/drivers/staging/usbip/Kconfig @@ -1,7 +1,6 @@ config USBIP_CORE tristate "USB/IP support" depends on USB && NET - default N ---help--- This enables pushing USB packets over IP to allow remote machines direct access to USB devices. It provides the @@ -18,7 +17,6 @@ config USBIP_CORE config USBIP_VHCI_HCD tristate "VHCI hcd" depends on USBIP_CORE - default N ---help--- This enables the USB/IP virtual host controller driver, which is run on the remote machine. @@ -29,7 +27,6 @@ config USBIP_VHCI_HCD config USBIP_HOST tristate "Host driver" depends on USBIP_CORE - default N ---help--- This enables the USB/IP host driver, which is run on the machine that is sharing the USB devices. @@ -40,6 +37,5 @@ config USBIP_HOST config USBIP_DEBUG bool "Debug messages for USB/IP" depends on USBIP_CORE - default N ---help--- This enables the debug messages from the USB/IP drivers. diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index fed7f68d025d..cb8e99156f5a 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -10,7 +10,6 @@ config USB_DEBUG config USB_ANNOUNCE_NEW_DEVICES bool "USB announce new devices" - default N help Say Y here if you want the USB core to always announce the idVendor, idProduct, Manufacturer, Product, and SerialNumber diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index f829a1aad1c3..5239e5163074 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -178,7 +178,7 @@ EXPORT_SYMBOL_GPL(usb_control_msg); * * Return: * If successful, 0. Otherwise a negative error number. The number of actual - * bytes transferred will be stored in the @actual_length paramater. + * bytes transferred will be stored in the @actual_length parameter. */ int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout) diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 9ff665f1322f..991386ceb4ec 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -831,7 +831,7 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs); * * this allows all outstanding URBs to be unlinked starting * from the back of the queue. This function is asynchronous. - * The unlinking is just tiggered. It may happen after this + * The unlinking is just triggered. It may happen after this * function has returned. * * This routine should not be called by a driver after its disconnect diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a9707da7da0b..c8b4161613cf 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -314,7 +314,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -326,7 +325,6 @@ config USB_ISP1362_HCD config USB_FUSBH200_HCD tristate "FUSBH200 HCD support" depends on USB - default N ---help--- Faraday FUSBH200 is designed to meet USB2.0 EHCI specification with minor modification. @@ -337,7 +335,6 @@ config USB_FUSBH200_HCD config USB_FOTG210_HCD tristate "FOTG210 HCD support" depends on USB - default N ---help--- Faraday FOTG210 is an OTG controller which can be configured as an USB2.0 host. It is designed to meet USB2.0 EHCI specification diff --git a/fs/buffer.c b/fs/buffer.c index 27265a8b43c1..8c53a2b15ecb 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -3088,7 +3088,7 @@ EXPORT_SYMBOL(submit_bh); * until the buffer gets unlocked). * * ll_rw_block sets b_end_io to simple completion handler that marks - * the buffer up-to-date (if approriate), unlocks the buffer and wakes + * the buffer up-to-date (if appropriate), unlocks the buffer and wakes * any waiters. * * All of the buffers must be for the same device, and must also be a diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 9c0444cccbe1..ca4a08f38374 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -358,7 +358,7 @@ exit: * @name: a pointer to a string containing the name of the file to create. * @mode: the permission that the file should have. * @parent: a pointer to the parent dentry for this file. This should be a - * directory dentry if set. If this paramater is NULL, then the + * directory dentry if set. If this parameter is NULL, then the * file will be created in the root of the debugfs filesystem. * @data: a pointer to something that the caller will want to get to later * on. The inode.i_private pointer will point to this value on @@ -400,7 +400,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_file); * @name: a pointer to a string containing the name of the directory to * create. * @parent: a pointer to the parent dentry for this file. This should be a - * directory dentry if set. If this paramater is NULL, then the + * directory dentry if set. If this parameter is NULL, then the * directory will be created in the root of the debugfs filesystem. * * This function creates a directory in debugfs with the given name. @@ -425,7 +425,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_dir); * @name: a pointer to a string containing the name of the symbolic link to * create. * @parent: a pointer to the parent dentry for this symbolic link. This - * should be a directory dentry if set. If this paramater is NULL, + * should be a directory dentry if set. If this parameter is NULL, * then the symbolic link will be created in the root of the debugfs * filesystem. * @target: a pointer to a string containing the path to the target of the diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 471f276ce8f7..0145b948b147 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -55,7 +55,7 @@ struct drm_fb_helper_surface_size { * save the current lut when force-restoring the fbdev for e.g. * kdbg. * @fb_probe: Driver callback to allocate and initialize the fbdev info - * structure. Futhermore it also needs to allocate the drm + * structure. Furthermore it also needs to allocate the drm * framebuffer used to back the fbdev. * @initial_config: Setup an initial fbdev display configuration * diff --git a/include/linux/gpio.h b/include/linux/gpio.h index b581b13d29d9..85aa5d0b9357 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -3,7 +3,7 @@ #include <linux/errno.h> -/* see Documentation/gpio.txt */ +/* see Documentation/gpio/gpio-legacy.txt */ /* make these flag values available regardless of GPIO kconfig options */ #define GPIOF_DIR_OUT (0 << 0) diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h index 0dca785288cf..39bfd5b89077 100644 --- a/include/linux/hsi/hsi.h +++ b/include/linux/hsi/hsi.h @@ -178,7 +178,7 @@ static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv) * @complete: Transfer completion callback * @destructor: Destructor to free resources when flushing * @status: Status of the transfer when completed - * @actual_len: Actual length of data transfered on completion + * @actual_len: Actual length of data transferred on completion * @channel: Channel were to TX/RX the message * @ttype: Transfer type (TX if set, RX otherwise) * @break_frame: if true HSI will send/receive a break frame. Data buffers are diff --git a/include/linux/idr.h b/include/linux/idr.h index 871a213a8477..ff94a4875e1c 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -82,7 +82,6 @@ int idr_for_each(struct idr *idp, void *idr_get_next(struct idr *idp, int *nextid); void *idr_replace(struct idr *idp, void *ptr, int id); void idr_remove(struct idr *idp, int id); -void idr_free(struct idr *idp, int id); void idr_destroy(struct idr *idp); void idr_init(struct idr *idp); diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 552d51efb429..554fde3a3927 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -722,7 +722,7 @@ __kfifo_uint_must_check_helper( \ /** * kfifo_dma_out_finish - finish a DMA OUT operation * @fifo: address of the fifo to be used - * @len: number of bytes transferd + * @len: number of bytes transferrd * * This macro finish a DMA OUT operation. The out counter will be updated by * the len parameter. No error checking will be done. diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index ab5752692113..4d9389c79e61 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -35,7 +35,7 @@ struct pipe_buffer { * @tmp_page: cached released page * @readers: number of current readers of this pipe * @writers: number of current writers of this pipe - * @files: number of struct file refering this pipe (protected by ->i_lock) + * @files: number of struct file referring this pipe (protected by ->i_lock) * @waiting_writers: number of writers blocked waiting for room * @r_counter: reader counter * @w_counter: writer counter diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h index 2a3855a8372a..c2049e3d7444 100644 --- a/include/linux/platform_data/ata-samsung_cf.h +++ b/include/linux/platform_data/ata-samsung_cf.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-samsung/include/plat/ata.h - * +/* * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com * @@ -10,8 +9,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_ATA_H -#define __ASM_PLAT_ATA_H __FILE__ +#ifndef __ATA_SAMSUNG_CF_H +#define __ATA_SAMSUNG_CF_H __FILE__ /** * struct s3c_ide_platdata - S3C IDE driver platform data. @@ -33,4 +32,4 @@ extern void s3c64xx_ide_setup_gpio(void); extern void s5pc100_ide_setup_gpio(void); extern void s5pv210_ide_setup_gpio(void); -#endif /*__ASM_PLAT_ATA_H */ +#endif /*__ATA_SAMSUNG_CF_H */ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index f589c9af8cbf..fc71710fba45 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2038,7 +2038,7 @@ static inline void skb_propagate_pfmemalloc(struct page *page, } /** - * skb_frag_page - retrieve the page refered to by a paged fragment + * skb_frag_page - retrieve the page referred to by a paged fragment * @frag: the paged fragment * * Returns the &struct page associated with @frag. diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 4203c66d8803..2c9cdef0598f 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -234,7 +234,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @mode_bits: flags understood by this controller driver * @bits_per_word_mask: A mask indicating which values of bits_per_word are * supported by the driver. Bit n indicates that a bits_per_word n+1 is - * suported. If set, the SPI core will reject any transfer with an + * supported. If set, the SPI core will reject any transfer with an * unsupported bits_per_word. If not set, this value is simply ignored, * and it's up to the individual driver to perform any validation. * @min_speed_hz: Lowest supported transfer speed @@ -259,7 +259,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cur_msg: the currently in-flight message * @cur_msg_prepared: spi_prepare_message was called for the currently * in-flight message - * @xfer_completion: used by core tranfer_one_message() + * @xfer_completion: used by core transfer_one_message() * @busy: message pump is busy * @running: message pump is running * @rt: whether this queue is set to run as a realtime task @@ -498,7 +498,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * @rx_buf: data to be read (dma-safe memory), or NULL * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped - * @tx_nbits: number of bits used for writting. If 0 the default + * @tx_nbits: number of bits used for writing. If 0 the default * (SPI_NBITS_SINGLE) is used. * @rx_nbits: number of bits used for reading. If 0 the default * (SPI_NBITS_SINGLE) is used. @@ -556,7 +556,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum); * by the results of previous messages and where the whole transaction * ends when the chipselect goes intactive. * - * When SPI can transfer in 1x,2x or 4x. It can get this tranfer information + * When SPI can transfer in 1x,2x or 4x. It can get this transfer information * from device through @tx_nbits and @rx_nbits. In Bi-direction, these * two should both be set. User can set transfer mode with SPI_NBITS_SINGLE(1x) * SPI_NBITS_DUAL(2x) and SPI_NBITS_QUAD(4x) to support these three transfer. diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index dba63f53906c..d3ca3b53837c 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -92,7 +92,7 @@ struct usb_configuration; * @suspend: Notifies functions when the host stops sending USB traffic. * @resume: Notifies functions when the host restarts USB traffic. * @get_status: Returns function status as a reply to - * GetStatus() request when the recepient is Interface. + * GetStatus() request when the recipient is Interface. * @func_suspend: callback to be called when * SetFeature(FUNCTION_SUSPEND) is reseived * diff --git a/include/net/mac80211.h b/include/net/mac80211.h index f4ab2fb4d50c..703b1f1456fc 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1895,7 +1895,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * * Driver informs U-APSD client support by enabling * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the - * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS + * uapsd parameter in conf_tx() operation. Hardware needs to send the QoS * Nullfunc frames and stay awake until the service period has ended. To * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames * from that AC are transmitted with powersave enabled. @@ -2101,7 +2101,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * with the number of frames to be released and which TIDs they are * to come from. In this case, the driver is responsible for setting * the EOSP (for uAPSD) and MORE_DATA bits in the released frames, - * to help the @more_data paramter is passed to tell the driver if + * to help the @more_data parameter is passed to tell the driver if * there is more data on other TIDs -- the TIDs to release frames * from are ignored since mac80211 doesn't know how many frames the * buffers for those TIDs contain. @@ -2662,7 +2662,7 @@ enum ieee80211_roc_type { * parameters. In the case where the driver buffers some frames for * sleeping stations mac80211 will use this callback to tell the driver * to release some frames, either for PS-poll or uAPSD. - * Note that if the @more_data paramter is %false the driver must check + * Note that if the @more_data parameter is %false the driver must check * if there are more frames on the given TIDs, and if there are more than * the frames being released then it must still set the more-data bit in * the frame. If the @more_data parameter is %true, then of course the diff --git a/kernel/relay.c b/kernel/relay.c index 5001c9887db1..52d6a6f56261 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -227,7 +227,7 @@ static void relay_destroy_buf(struct rchan_buf *buf) * relay_remove_buf - remove a channel buffer * @kref: target kernel reference that contains the relay buffer * - * Removes the file from the fileystem, which also frees the + * Removes the file from the filesystem, which also frees the * rchan_buf_struct and the channel buffer. Should only be called from * kref_put(). */ diff --git a/kernel/signal.c b/kernel/signal.c index 52f881db1ca0..5d4b05a229a6 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -2382,7 +2382,7 @@ relock: * @regs: user register state * @stepping: nonzero if debugger single-step or block-step in use * - * This function should be called when a signal has succesfully been + * This function should be called when a signal has successfully been * delivered. It updates the blocked signals accordingly (@ka->sa.sa_mask * is always blocked, and the signal itself is blocked unless %SA_NODEFER * is set in @ka->sa.sa_flags. Tracing is notified. diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c index 240fb62cf394..dd06439b9c84 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -225,7 +225,7 @@ static u32 map_id_up(struct uid_gid_map *map, u32 id) * * When there is no mapping defined for the user-namespace uid * pair INVALID_UID is returned. Callers are expected to test - * for and handle handle INVALID_UID being returned. INVALID_UID + * for and handle INVALID_UID being returned. INVALID_UID * may be tested for using uid_valid(). */ kuid_t make_kuid(struct user_namespace *ns, uid_t uid) diff --git a/net/core/dev.c b/net/core/dev.c index 4ad1b78c9c77..9971ea1adc10 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3439,7 +3439,7 @@ out: * @rx_handler: receive handler to register * @rx_handler_data: data pointer that is used by rx handler * - * Register a receive hander for a device. This handler will then be + * Register a receive handler for a device. This handler will then be * called from __netif_receive_skb. A negative errno code is returned * on a failure. * |