summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/mfd/Kconfig7
-rw-r--r--drivers/mfd/Makefile1
-rw-r--r--drivers/mfd/asic3.c588
-rw-r--r--include/linux/mfd/asic3.h497
4 files changed, 1093 insertions, 0 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 25716193a534..0c886c882385 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -15,6 +15,13 @@ config MFD_SM501
interface. The device may be connected by PCI or local bus with
varying functions enabled.
+config MFD_ASIC3
+ bool "Support for Compaq ASIC3"
+ depends on GENERIC_HARDIRQS && ARM
+ ---help---
+ This driver supports the ASIC3 multifunction chip found on many
+ PDAs (mainly iPAQ and HTC based ones)
+
endmenu
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 51432091b323..521cd5cb68af 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_MFD_SM501) += sm501.o
+obj-$(CONFIG_MFD_ASIC3) += asic3.o
obj-$(CONFIG_MCP) += mcp-core.o
obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
new file mode 100644
index 000000000000..63fb1ff3ad10
--- /dev/null
+++ b/drivers/mfd/asic3.c
@@ -0,0 +1,588 @@
+/*
+ * driver/mfd/asic3.c
+ *
+ * Compaq ASIC3 support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright 2001 Compaq Computer Corporation.
+ * Copyright 2004-2005 Phil Blundell
+ * Copyright 2007 OpenedHand Ltd.
+ *
+ * Authors: Phil Blundell <pb@handhelds.org>,
+ * Samuel Ortiz <sameo@openedhand.com>
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/asic3.h>
+
+static inline void asic3_write_register(struct asic3 *asic,
+ unsigned int reg, u32 value)
+{
+ iowrite16(value, (unsigned long)asic->mapping +
+ (reg >> asic->bus_shift));
+}
+
+static inline u32 asic3_read_register(struct asic3 *asic,
+ unsigned int reg)
+{
+ return ioread16((unsigned long)asic->mapping +
+ (reg >> asic->bus_shift));
+}
+
+/* IRQs */
+#define MAX_ASIC_ISR_LOOPS 20
+#define ASIC3_GPIO_Base_INCR \
+ (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base)
+
+static void asic3_irq_flip_edge(struct asic3 *asic,
+ u32 base, int bit)
+{
+ u16 edge;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asic->lock, flags);
+ edge = asic3_read_register(asic,
+ base + ASIC3_GPIO_EdgeTrigger);
+ edge ^= bit;
+ asic3_write_register(asic,
+ base + ASIC3_GPIO_EdgeTrigger, edge);
+ spin_unlock_irqrestore(&asic->lock, flags);
+}
+
+static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+ int iter, i;
+ unsigned long flags;
+ struct asic3 *asic;
+
+ desc->chip->ack(irq);
+
+ asic = desc->handler_data;
+
+ for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
+ u32 status;
+ int bank;
+
+ spin_lock_irqsave(&asic->lock, flags);
+ status = asic3_read_register(asic,
+ ASIC3_OFFSET(INTR, PIntStat));
+ spin_unlock_irqrestore(&asic->lock, flags);
+
+ /* Check all ten register bits */
+ if ((status & 0x3ff) == 0)
+ break;
+
+ /* Handle GPIO IRQs */
+ for (bank = 0; bank < ASIC3_NUM_GPIO_BANKS; bank++) {
+ if (status & (1 << bank)) {
+ unsigned long base, istat;
+
+ base = ASIC3_GPIO_A_Base
+ + bank * ASIC3_GPIO_Base_INCR;
+
+ spin_lock_irqsave(&asic->lock, flags);
+ istat = asic3_read_register(asic,
+ base +
+ ASIC3_GPIO_IntStatus);
+ /* Clearing IntStatus */
+ asic3_write_register(asic,
+ base +
+ ASIC3_GPIO_IntStatus, 0);
+ spin_unlock_irqrestore(&asic->lock, flags);
+
+ for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) {
+ int bit = (1 << i);
+ unsigned int irqnr;
+
+ if (!(istat & bit))
+ continue;
+
+ irqnr = asic->irq_base +
+ (ASIC3_GPIOS_PER_BANK * bank)
+ + i;
+ desc = irq_desc + irqnr;
+ desc->handle_irq(irqnr, desc);
+ if (asic->irq_bothedge[bank] & bit)
+ asic3_irq_flip_edge(asic, base,
+ bit);
+ }
+ }
+ }
+
+ /* Handle remaining IRQs in the status register */
+ for (i = ASIC3_NUM_GPIOS; i < ASIC3_NR_IRQS; i++) {
+ /* They start at bit 4 and go up */
+ if (status & (1 << (i - ASIC3_NUM_GPIOS + 4))) {
+ desc = irq_desc + + i;
+ desc->handle_irq(asic->irq_base + i,
+ desc);
+ }
+ }
+ }
+
+ if (iter >= MAX_ASIC_ISR_LOOPS)
+ printk(KERN_ERR "%s: interrupt processing overrun\n",
+ __FUNCTION__);
+}
+
+static inline int asic3_irq_to_bank(struct asic3 *asic, int irq)
+{
+ int n;
+
+ n = (irq - asic->irq_base) >> 4;
+
+ return (n * (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base));
+}
+
+static inline int asic3_irq_to_index(struct asic3 *asic, int irq)
+{
+ return (irq - asic->irq_base) & 0xf;
+}
+
+static void asic3_mask_gpio_irq(unsigned int irq)
+{
+ struct asic3 *asic = get_irq_chip_data(irq);
+ u32 val, bank, index;
+ unsigned long flags;
+
+ bank = asic3_irq_to_bank(asic, irq);
+ index = asic3_irq_to_index(asic, irq);
+
+ spin_lock_irqsave(&asic->lock, flags);
+ val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
+ val |= 1 << index;
+ asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
+ spin_unlock_irqrestore(&asic->lock, flags);
+}
+
+static void asic3_mask_irq(unsigned int irq)
+{
+ struct asic3 *asic = get_irq_chip_data(irq);
+ int regval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asic->lock, flags);
+ regval = asic3_read_register(asic,
+ ASIC3_INTR_Base +
+ ASIC3_INTR_IntMask);
+
+ regval &= ~(ASIC3_INTMASK_MASK0 <<
+ (irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
+
+ asic3_write_register(asic,
+ ASIC3_INTR_Base +
+ ASIC3_INTR_IntMask,
+ regval);
+ spin_unlock_irqrestore(&asic->lock, flags);
+}
+
+static void asic3_unmask_gpio_irq(unsigned int irq)
+{
+ struct asic3 *asic = get_irq_chip_data(irq);
+ u32 val, bank, index;
+ unsigned long flags;
+
+ bank = asic3_irq_to_bank(asic, irq);
+ index = asic3_irq_to_index(asic, irq);
+
+ spin_lock_irqsave(&asic->lock, flags);
+ val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
+ val &= ~(1 << index);
+ asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
+ spin_unlock_irqrestore(&asic->lock, flags);
+}
+
+static void asic3_unmask_irq(unsigned int irq)
+{
+ struct asic3 *asic = get_irq_chip_data(irq);
+ int regval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asic->lock, flags);
+ regval = asic3_read_register(asic,
+ ASIC3_INTR_Base +
+ ASIC3_INTR_IntMask);
+
+ regval |= (ASIC3_INTMASK_MASK0 <<
+ (irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
+
+ asic3_write_register(asic,
+ ASIC3_INTR_Base +
+ ASIC3_INTR_IntMask,
+ regval);
+ spin_unlock_irqrestore(&asic->lock, flags);
+}
+
+static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+ struct asic3 *asic = get_irq_chip_data(irq);
+ u32 bank, index;
+ u16 trigger, level, edge, bit;
+ unsigned long flags;
+
+ bank = asic3_irq_to_bank(asic, irq);
+ index = asic3_irq_to_index(asic, irq);
+ bit = 1<<index;
+
+ spin_lock_irqsave(&asic->lock, flags);
+ level = asic3_read_register(asic,
+ bank + ASIC3_GPIO_LevelTrigger);
+ edge = asic3_read_register(asic,
+ bank + ASIC3_GPIO_EdgeTrigger);
+ trigger = asic3_read_register(asic,
+ bank + ASIC3_GPIO_TriggerType);
+ asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
+
+ if (type == IRQT_RISING) {
+ trigger |= bit;
+ edge |= bit;
+ } else if (type == IRQT_FALLING) {
+ trigger |= bit;
+ edge &= ~bit;
+ } else if (type == IRQT_BOTHEDGE) {
+ trigger |= bit;
+ if (asic3_gpio_get_value(asic, irq - asic->irq_base))
+ edge &= ~bit;
+ else
+ edge |= bit;
+ asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit;
+ } else if (type == IRQT_LOW) {
+ trigger &= ~bit;
+ level &= ~bit;
+ } else if (type == IRQT_HIGH) {
+ trigger &= ~bit;
+ level |= bit;
+ } else {
+ /*
+ * if type == IRQT_NOEDGE, we should mask interrupts, but
+ * be careful to not unmask them if mask was also called.
+ * Probably need internal state for mask.
+ */
+ printk(KERN_NOTICE "asic3: irq type not changed.\n");
+ }
+ asic3_write_register(asic, bank + ASIC3_GPIO_LevelTrigger,
+ level);
+ asic3_write_register(asic, bank + ASIC3_GPIO_EdgeTrigger,
+ edge);
+ asic3_write_register(asic, bank + ASIC3_GPIO_TriggerType,
+ trigger);
+ spin_unlock_irqrestore(&asic->lock, flags);
+ return 0;
+}
+
+static struct irq_chip asic3_gpio_irq_chip = {
+ .name = "ASIC3-GPIO",
+ .ack = asic3_mask_gpio_irq,
+ .mask = asic3_mask_gpio_irq,
+ .unmask = asic3_unmask_gpio_irq,
+ .set_type = asic3_gpio_irq_type,
+};
+
+static struct irq_chip asic3_irq_chip = {
+ .name = "ASIC3",
+ .ack = asic3_mask_irq,
+ .mask = asic3_mask_irq,
+ .unmask = asic3_unmask_irq,
+};
+
+static int asic3_irq_probe(struct platform_device *pdev)
+{
+ struct asic3 *asic = platform_get_drvdata(pdev);
+ unsigned long clksel = 0;
+ unsigned int irq, irq_base;
+
+ asic->irq_nr = platform_get_irq(pdev, 0);
+ if (asic->irq_nr < 0)
+ return asic->irq_nr;
+
+ /* turn on clock to IRQ controller */
+ clksel |= CLOCK_SEL_CX;
+ asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
+ clksel);
+
+ irq_base = asic->irq_base;
+
+ for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
+ if (irq < asic->irq_base + ASIC3_NUM_GPIOS)
+ set_irq_chip(irq, &asic3_gpio_irq_chip);
+ else
+ set_irq_chip(irq, &asic3_irq_chip);
+
+ set_irq_chip_data(irq, asic);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ asic3_write_register(asic, ASIC3_OFFSET(INTR, IntMask),
+ ASIC3_INTMASK_GINTMASK);
+
+ set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
+ set_irq_type(asic->irq_nr, IRQT_RISING);
+ set_irq_data(asic->irq_nr, asic);
+
+ return 0;
+}
+
+static void asic3_irq_remove(struct platform_device *pdev)
+{
+ struct asic3 *asic = platform_get_drvdata(pdev);
+ unsigned int irq, irq_base;
+
+ irq_base = asic->irq_base;
+
+ for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
+ set_irq_flags(irq, 0);
+ set_irq_handler(irq, NULL);
+ set_irq_chip(irq, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+ set_irq_chained_handler(asic->irq_nr, NULL);
+}
+
+/* GPIOs */
+static inline u32 asic3_get_gpio(struct asic3 *asic, unsigned int base,
+ unsigned int function)
+{
+ return asic3_read_register(asic, base + function);
+}
+
+static void asic3_set_gpio(struct asic3 *asic, unsigned int base,
+ unsigned int function, u32 bits, u32 val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&asic->lock, flags);
+ val |= (asic3_read_register(asic, base + function) & ~bits);
+
+ asic3_write_register(asic, base + function, val);
+ spin_unlock_irqrestore(&asic->lock, flags);
+}
+
+#define asic3_get_gpio_a(asic, fn) \
+ asic3_get_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn)
+#define asic3_get_gpio_b(asic, fn) \
+ asic3_get_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn)
+#define asic3_get_gpio_c(asic, fn) \
+ asic3_get_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn)
+#define asic3_get_gpio_d(asic, fn) \
+ asic3_get_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn)
+
+#define asic3_set_gpio_a(asic, fn, bits, val) \
+ asic3_set_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn, bits, val)
+#define asic3_set_gpio_b(asic, fn, bits, val) \
+ asic3_set_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn, bits, val)
+#define asic3_set_gpio_c(asic, fn, bits, val) \
+ asic3_set_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn, bits, val)
+#define asic3_set_gpio_d(asic, fn, bits, val) \
+ asic3_set_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn, bits, val)
+
+#define asic3_set_gpio_banks(asic, fn, bits, pdata, field) \
+ do { \
+ asic3_set_gpio_a((asic), fn, (bits), (pdata)->gpio_a.field); \
+ asic3_set_gpio_b((asic), fn, (bits), (pdata)->gpio_b.field); \
+ asic3_set_gpio_c((asic), fn, (bits), (pdata)->gpio_c.field); \
+ asic3_set_gpio_d((asic), fn, (bits), (pdata)->gpio_d.field); \
+ } while (0)
+
+int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio)
+{
+ u32 mask = ASIC3_GPIO_bit(gpio);
+
+ switch (gpio >> 4) {
+ case ASIC3_GPIO_BANK_A:
+ return asic3_get_gpio_a(asic, Status) & mask;
+ case ASIC3_GPIO_BANK_B:
+ return asic3_get_gpio_b(asic, Status) & mask;
+ case ASIC3_GPIO_BANK_C:
+ return asic3_get_gpio_c(asic, Status) & mask;
+ case ASIC3_GPIO_BANK_D:
+ return asic3_get_gpio_d(asic, Status) & mask;
+ default:
+ printk(KERN_ERR "%s: invalid GPIO value 0x%x",
+ __FUNCTION__, gpio);
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL(asic3_gpio_get_value);
+
+void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val)
+{
+ u32 mask = ASIC3_GPIO_bit(gpio);
+ u32 bitval = 0;
+ if (val)
+ bitval = mask;
+
+ switch (gpio >> 4) {
+ case ASIC3_GPIO_BANK_A:
+ asic3_set_gpio_a(asic, Out, mask, bitval);
+ return;
+ case ASIC3_GPIO_BANK_B:
+ asic3_set_gpio_b(asic, Out, mask, bitval);
+ return;
+ case ASIC3_GPIO_BANK_C:
+ asic3_set_gpio_c(asic, Out, mask, bitval);
+ return;
+ case ASIC3_GPIO_BANK_D:
+ asic3_set_gpio_d(asic, Out, mask, bitval);
+ return;
+ default:
+ printk(KERN_ERR "%s: invalid GPIO value 0x%x",
+ __FUNCTION__, gpio);
+ return;
+ }
+}
+EXPORT_SYMBOL(asic3_gpio_set_value);
+
+static int asic3_gpio_probe(struct platform_device *pdev)
+{
+ struct asic3_platform_data *pdata = pdev->dev.platform_data;
+ struct asic3 *asic = platform_get_drvdata(pdev);
+
+ asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
+ asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
+ asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
+ asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
+
+ asic3_set_gpio_a(asic, SleepMask, 0xffff, 0xffff);
+ asic3_set_gpio_b(asic, SleepMask, 0xffff, 0xffff);
+ asic3_set_gpio_c(asic, SleepMask, 0xffff, 0xffff);
+ asic3_set_gpio_d(asic, SleepMask, 0xffff, 0xffff);
+
+ if (pdata) {
+ asic3_set_gpio_banks(asic, Out, 0xffff, pdata, init);
+ asic3_set_gpio_banks(asic, Direction, 0xffff, pdata, dir);
+ asic3_set_gpio_banks(asic, SleepMask, 0xffff, pdata,
+ sleep_mask);
+ asic3_set_gpio_banks(asic, SleepOut, 0xffff, pdata, sleep_out);
+ asic3_set_gpio_banks(asic, BattFaultOut, 0xffff, pdata,
+ batt_fault_out);
+ asic3_set_gpio_banks(asic, SleepConf, 0xffff, pdata,
+ sleep_conf);
+ asic3_set_gpio_banks(asic, AltFunction, 0xffff, pdata,
+ alt_function);
+ }
+
+ return 0;
+}
+
+static void asic3_gpio_remove(struct platform_device *pdev)
+{
+ return;
+}
+
+
+/* Core */
+static int asic3_probe(struct platform_device *pdev)
+{
+ struct asic3_platform_data *pdata = pdev->dev.platform_data;
+ struct asic3 *asic;
+ struct resource *mem;
+ unsigned long clksel;
+ int ret;
+
+ asic = kzalloc(sizeof(struct asic3), GFP_KERNEL);
+ if (!asic)
+ return -ENOMEM;
+
+ spin_lock_init(&asic->lock);
+ platform_set_drvdata(pdev, asic);
+ asic->dev = &pdev->dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ ret = -ENOMEM;
+ printk(KERN_ERR "asic3: no MEM resource\n");
+ goto err_out_1;
+ }
+
+ asic->mapping = ioremap(mem->start, PAGE_SIZE);
+ if (!asic->mapping) {
+ ret = -ENOMEM;
+ printk(KERN_ERR "asic3: couldn't ioremap\n");
+ goto err_out_1;
+ }
+
+ asic->irq_base = pdata->irq_base;
+
+ if (pdata && pdata->bus_shift)
+ asic->bus_shift = 2 - pdata->bus_shift;
+ else
+ asic->bus_shift = 0;
+
+ clksel = 0;
+ asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel);
+
+ ret = asic3_irq_probe(pdev);
+ if (ret < 0) {
+ printk(KERN_ERR "asic3: couldn't probe IRQs\n");
+ goto err_out_2;
+ }
+ asic3_gpio_probe(pdev);
+
+ if (pdata->children) {
+ int i;
+ for (i = 0; i < pdata->n_children; i++) {
+ pdata->children[i]->dev.parent = &pdev->dev;
+ platform_device_register(pdata->children[i]);
+ }
+ }
+
+ printk(KERN_INFO "ASIC3 Core driver\n");
+
+ return 0;
+
+ err_out_2:
+ iounmap(asic->mapping);
+ err_out_1:
+ kfree(asic);
+
+ return ret;
+}
+
+static int asic3_remove(struct platform_device *pdev)
+{
+ struct asic3 *asic = platform_get_drvdata(pdev);
+
+ asic3_gpio_remove(pdev);
+ asic3_irq_remove(pdev);
+
+ asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), 0);
+
+ iounmap(asic->mapping);
+
+ kfree(asic);
+
+ return 0;
+}
+
+static void asic3_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver asic3_device_driver = {
+ .driver = {
+ .name = "asic3",
+ },
+ .probe = asic3_probe,
+ .remove = __devexit_p(asic3_remove),
+ .shutdown = asic3_shutdown,
+};
+
+static int __init asic3_init(void)
+{
+ int retval = 0;
+ retval = platform_driver_register(&asic3_device_driver);
+ return retval;
+}
+
+subsys_initcall(asic3_init);
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
new file mode 100644
index 000000000000..4ab2162db13b
--- /dev/null
+++ b/include/linux/mfd/asic3.h
@@ -0,0 +1,497 @@
+/*
+ * include/linux/mfd/asic3.h
+ *
+ * Compaq ASIC3 headers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright 2001 Compaq Computer Corporation.
+ * Copyright 2007 OpendHand.
+ */
+
+#ifndef __ASIC3_H__
+#define __ASIC3_H__
+
+#include <linux/types.h>
+
+struct asic3 {
+ void __iomem *mapping;
+ unsigned int bus_shift;
+ unsigned int irq_nr;
+ unsigned int irq_base;
+ spinlock_t lock;
+ u16 irq_bothedge[4];
+ struct device *dev;
+};
+
+struct asic3_platform_data {
+ struct {
+ u32 dir;
+ u32 init;
+ u32 sleep_mask;
+ u32 sleep_out;
+ u32 batt_fault_out;
+ u32 sleep_conf;
+ u32 alt_function;
+ } gpio_a, gpio_b, gpio_c, gpio_d;
+
+ unsigned int bus_shift;
+
+ unsigned int irq_base;
+
+ struct platform_device **children;
+ unsigned int n_children;
+};
+
+int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio);
+void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
+
+#define ASIC3_NUM_GPIO_BANKS 4
+#define ASIC3_GPIOS_PER_BANK 16
+#define ASIC3_NUM_GPIOS 64
+#define ASIC3_NR_IRQS ASIC3_NUM_GPIOS + 6
+
+#define ASIC3_GPIO_BANK_A 0
+#define ASIC3_GPIO_BANK_B 1
+#define ASIC3_GPIO_BANK_C 2
+#define ASIC3_GPIO_BANK_D 3
+
+#define ASIC3_GPIO(bank, gpio) \
+ ((ASIC3_GPIOS_PER_BANK * ASIC3_GPIO_BANK_##bank) + (gpio))
+#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf))
+/* All offsets below are specified with this address bus shift */
+#define ASIC3_DEFAULT_ADDR_SHIFT 2
+
+#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_Base + ASIC3_##base##_##reg)
+#define ASIC3_GPIO_OFFSET(base, reg) \
+ (ASIC3_GPIO_##base##_Base + ASIC3_GPIO_##reg)
+
+#define ASIC3_GPIO_A_Base 0x0000
+#define ASIC3_GPIO_B_Base 0x0100
+#define ASIC3_GPIO_C_Base 0x0200
+#define ASIC3_GPIO_D_Base 0x0300
+
+#define ASIC3_GPIO_Mask 0x00 /* R/W 0:don't mask */
+#define ASIC3_GPIO_Direction 0x04 /* R/W 0:input */
+#define ASIC3_GPIO_Out 0x08 /* R/W 0:output low */
+#define ASIC3_GPIO_TriggerType 0x0c /* R/W 0:level */
+#define ASIC3_GPIO_EdgeTrigger 0x10 /* R/W 0:falling */
+#define ASIC3_GPIO_LevelTrigger 0x14 /* R/W 0:low level detect */
+#define ASIC3_GPIO_SleepMask 0x18 /* R/W 0:don't mask in sleep mode */
+#define ASIC3_GPIO_SleepOut 0x1c /* R/W level 0:low in sleep mode */
+#define ASIC3_GPIO_BattFaultOut 0x20 /* R/W level 0:low in batt_fault */
+#define ASIC3_GPIO_IntStatus 0x24 /* R/W 0:none, 1:detect */
+#define ASIC3_GPIO_AltFunction 0x28 /* R/W 1:LED register control */
+#define ASIC3_GPIO_SleepConf 0x2c /*
+ * R/W bit 1: autosleep
+ * 0: disable gposlpout in normal mode,
+ * enable gposlpout in sleep mode.
+ */
+#define ASIC3_GPIO_Status 0x30 /* R Pin status */
+
+#define ASIC3_SPI_Base 0x0400
+#define ASIC3_SPI_Control 0x0000
+#define ASIC3_SPI_TxData 0x0004
+#define ASIC3_SPI_RxData 0x0008
+#define ASIC3_SPI_Int 0x000c
+#define ASIC3_SPI_Status 0x0010
+
+#define SPI_CONTROL_SPR(clk) ((clk) & 0x0f) /* Clock rate */
+
+#define ASIC3_PWM_0_Base 0x0500
+#define ASIC3_PWM_1_Base 0x0600
+#define ASIC3_PWM_TimeBase 0x0000
+#define ASIC3_PWM_PeriodTime 0x0004
+#define ASIC3_PWM_DutyTime 0x0008
+
+#define PWM_TIMEBASE_VALUE(x) ((x)&0xf) /* Low 4 bits sets time base */
+#define PWM_TIMEBASE_ENABLE (1 << 4) /* Enable clock */
+
+#define ASIC3_LED_0_Base 0x0700
+#define ASIC3_LED_1_Base 0x0800
+#define ASIC3_LED_2_Base 0x0900
+#define ASIC3_LED_TimeBase 0x0000 /* R/W 7 bits */
+#define ASIC3_LED_PeriodTime 0x0004 /* R/W 12 bits */
+#define ASIC3_LED_DutyTime 0x0008 /* R/W 12 bits */
+#define ASIC3_LED_AutoStopCount 0x000c /* R/W 16 bits */
+
+/* LED TimeBase bits - match ASIC2 */
+#define LED_TBS 0x0f /* Low 4 bits sets time base, max = 13 */
+ /* Note: max = 5 on hx4700 */
+ /* 0: maximum time base */
+ /* 1: maximum time base / 2 */
+ /* n: maximum time base / 2^n */
+
+#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */
+#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */
+#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
+
+#define ASIC3_CLOCK_Base 0x0A00
+#define ASIC3_CLOCK_CDEX 0x00
+#define ASIC3_CLOCK_SEL 0x04
+
+#define CLOCK_CDEX_SOURCE (1 << 0) /* 2 bits */
+#define CLOCK_CDEX_SOURCE0 (1 << 0)
+#define CLOCK_CDEX_SOURCE1 (1 << 1)
+#define CLOCK_CDEX_SPI (1 << 2)
+#define CLOCK_CDEX_OWM (1 << 3)
+#define CLOCK_CDEX_PWM0 (1 << 4)
+#define CLOCK_CDEX_PWM1 (1 << 5)
+#define CLOCK_CDEX_LED0 (1 << 6)
+#define CLOCK_CDEX_LED1 (1 << 7)
+#define CLOCK_CDEX_LED2 (1 << 8)
+
+/* Clocks settings: 1 for 24.576 MHz, 0 for 12.288Mhz */
+#define CLOCK_CDEX_SD_HOST (1 << 9) /* R/W: SD host clock source */
+#define CLOCK_CDEX_SD_BUS (1 << 10) /* R/W: SD bus clock source ctrl */
+#define CLOCK_CDEX_SMBUS (1 << 11)
+#define CLOCK_CDEX_CONTROL_CX (1 << 12)
+
+#define CLOCK_CDEX_EX0 (1 << 13) /* R/W: 32.768 kHz crystal */
+#define CLOCK_CDEX_EX1 (1 << 14) /* R/W: 24.576 MHz crystal */
+
+#define CLOCK_SEL_SD_HCLK_SEL (1 << 0) /* R/W: SDIO host clock select */
+#define CLOCK_SEL_SD_BCLK_SEL (1 << 1) /* R/W: SDIO bus clock select */
+
+/* R/W: INT clock source control (32.768 kHz) */
+#define CLOCK_SEL_CX (1 << 2)
+
+
+#define ASIC3_INTR_Base 0x0B00
+
+#define ASIC3_INTR_IntMask 0x00 /* Interrupt mask control */
+#define ASIC3_INTR_PIntStat 0x04 /* Peripheral interrupt status */
+#define ASIC3_INTR_IntCPS 0x08 /* Interrupt timer clock pre-scale */
+#define ASIC3_INTR_IntTBS 0x0c /* Interrupt timer set */
+
+#define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global INTs mask 1:enable */
+#define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */
+#define ASIC3_INTMASK_MASK0 (1 << 2)
+#define ASIC3_INTMASK_MASK1 (1 << 3)
+#define ASIC3_INTMASK_MASK2 (1 << 4)
+#define ASIC3_INTMASK_MASK3 (1 << 5)
+#define ASIC3_INTMASK_MASK4 (1 << 6)
+#define ASIC3_INTMASK_MASK5 (1 << 7)
+
+#define ASIC3_INTR_PERIPHERAL_A (1 << 0)
+#define ASIC3_INTR_PERIPHERAL_B (1 << 1)
+#define ASIC3_INTR_PERIPHERAL_C (1 << 2)
+#define ASIC3_INTR_PERIPHERAL_D (1 << 3)
+#define ASIC3_INTR_LED0 (1 << 4)
+#define ASIC3_INTR_LED1 (1 << 5)
+#define ASIC3_INTR_LED2 (1 << 6)
+#define ASIC3_INTR_SPI (1 << 7)
+#define ASIC3_INTR_SMBUS (1 << 8)
+#define ASIC3_INTR_OWM (1 << 9)
+
+#define ASIC3_INTR_CPS(x) ((x)&0x0f) /* 4 bits, max 14 */
+#define ASIC3_INTR_CPS_SET (1 << 4) /* Time base enable */
+
+
+/* Basic control of the SD ASIC */
+#define ASIC3_SDHWCTRL_Base 0x0E00
+#define ASIC3_SDHWCTRL_SDConf 0x00
+
+#define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */
+#define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */
+#define ASIC3_SDHWCTRL_PCLR (1 << 2) /* All registers of SDIO cleared */
+#define ASIC3_SDHWCTRL_LEVCD (1 << 3) /* SD card detection: 0:low */
+
+/* SD card write protection: 0=high */
+#define ASIC3_SDHWCTRL_LEVWP (1 << 4)
+#define ASIC3_SDHWCTRL_SDLED (1 << 5) /* SD card LED signal 0=disable */
+
+/* SD card power supply ctrl 1=enable */
+#define ASIC3_SDHWCTRL_SDPWR (1 << 6)
+
+#define ASIC3_EXTCF_Base 0x1100
+
+#define ASIC3_EXTCF_Select 0x00
+#define ASIC3_EXTCF_Reset 0x04
+
+#define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */
+#define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */
+#define ASIC3_EXTCF_SMOD2 (1 << 2) /* slot number of mode 2 */
+#define ASIC3_EXTCF_OWM_EN (1 << 4) /* enable onewire module */
+#define ASIC3_EXTCF_OWM_SMB (1 << 5) /* OWM bus selection */
+#define ASIC3_EXTCF_OWM_RESET (1 << 6) /* ?? used by OWM and CF */
+#define ASIC3_EXTCF_CF0_SLEEP_MODE (1 << 7) /* CF0 sleep state */
+#define ASIC3_EXTCF_CF1_SLEEP_MODE (1 << 8) /* CF1 sleep state */
+#define ASIC3_EXTCF_CF0_PWAIT_EN (1 << 10) /* CF0 PWAIT_n control */
+#define ASIC3_EXTCF_CF1_PWAIT_EN (1 << 11) /* CF1 PWAIT_n control */
+#define ASIC3_EXTCF_CF0_BUF_EN (1 << 12) /* CF0 buffer control */
+#define ASIC3_EXTCF_CF1_BUF_EN (1 << 13) /* CF1 buffer control */
+#define ASIC3_EXTCF_SD_MEM_ENABLE (1 << 14)
+#define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */
+
+/*********************************************
+ * The Onewire interface registers
+ *
+ * OWM_CMD
+ * OWM_DAT
+ * OWM_INTR
+ * OWM_INTEN
+ * OWM_CLKDIV
+ *
+ *********************************************/
+
+#define ASIC3_OWM_Base 0xC00
+
+#define ASIC3_OWM_CMD 0x00
+#define ASIC3_OWM_DAT 0x04
+#define ASIC3_OWM_INTR 0x08
+#define ASIC3_OWM_INTEN 0x0C
+#define ASIC3_OWM_CLKDIV 0x10
+
+#define ASIC3_OWM_CMD_ONEWR (1 << 0)
+#define ASIC3_OWM_CMD_SRA (1 << 1)
+#define ASIC3_OWM_CMD_DQO (1 << 2)
+#define ASIC3_OWM_CMD_DQI (1 << 3)
+
+#define ASIC3_OWM_INTR_PD (1 << 0)
+#define ASIC3_OWM_INTR_PDR (1 << 1)
+#define ASIC3_OWM_INTR_TBE (1 << 2)
+#define ASIC3_OWM_INTR_TEMP (1 << 3)
+#define ASIC3_OWM_INTR_RBF (1 << 4)
+
+#define ASIC3_OWM_INTEN_EPD (1 << 0)
+#define ASIC3_OWM_INTEN_IAS (1 << 1)
+#define ASIC3_OWM_INTEN_ETBE (1 << 2)
+#define ASIC3_OWM_INTEN_ETMT (1 << 3)
+#define ASIC3_OWM_INTEN_ERBF (1 << 4)
+
+#define ASIC3_OWM_CLKDIV_PRE (3 << 0) /* two bits wide at bit 0 */
+#define ASIC3_OWM_CLKDIV_DIV (7 << 2) /* 3 bits wide at bit 2 */
+
+
+/*****************************************************************************
+ * The SD configuration registers are at a completely different location
+ * in memory. They are divided into three sets of registers:
+ *
+ * SD_CONFIG Core configuration register
+ * SD_CTRL Control registers for SD operations
+ * SDIO_CTRL Control registers for SDIO operations
+ *
+ *****************************************************************************/
+#define ASIC3_SD_CONFIG_Base 0x0400 /* Assumes 32 bit addressing */
+
+#define ASIC3_SD_CONFIG_Command 0x08 /* R/W: Command */
+
+/* [0:8] SD Control Register Base Address */
+#define ASIC3_SD_CONFIG_Addr0 0x20
+
+/* [9:31] SD Control Register Base Address */
+#define ASIC3_SD_CONFIG_Addr1 0x24
+
+/* R/O: interrupt assigned to pin */
+#define ASIC3_SD_CONFIG_IntPin 0x78
+
+/*
+ * Set to 0x1f to clock SD controller, 0 otherwise.
+ * At 0x82 - Gated Clock Ctrl
+ */
+#define ASIC3_SD_CONFIG_ClkStop 0x80
+
+/* Control clock of SD controller */
+#define ASIC3_SD_CONFIG_ClockMode 0x84
+#define ASIC3_SD_CONFIG_SDHC_PinStatus 0x88 /* R/0: SD pins status */
+#define ASIC3_SD_CONFIG_SDHC_Power1 0x90 /* Power1 - manual pwr ctrl */
+
+/* auto power up after card inserted */
+#define ASIC3_SD_CONFIG_SDHC_Power2 0x92
+
+/* auto power down when card removed */
+#define ASIC3_SD_CONFIG_SDHC_Power3 0x94
+#define ASIC3_SD_CONFIG_SDHC_CardDetect 0x98
+#define ASIC3_SD_CONFIG_SDHC_Slot 0xA0 /* R/O: support slot number */
+#define ASIC3_SD_CONFIG_SDHC_ExtGateClk1 0x1E0 /* Not used */
+#define ASIC3_SD_CONFIG_SDHC_ExtGateClk2 0x1E2 /* Not used*/
+
+/* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */
+#define ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable 0x1E8
+#define ASIC3_SD_CONFIG_SDHC_GPIO_Status 0x1EC /* GPIO Status Reg. */
+
+/* Bit 1: double buffer/single buffer */
+#define ASIC3_SD_CONFIG_SDHC_ExtGateClk3 0x1F0
+
+/* Memory access enable (set to 1 to access SD Controller) */
+#define SD_CONFIG_COMMAND_MAE (1<<1)
+
+#define SD_CONFIG_CLK_ENABLE_ALL 0x1f
+
+#define SD_CONFIG_POWER1_PC_33V 0x0200 /* Set for 3.3 volts */
+#define SD_CONFIG_POWER1_PC_OFF 0x0000 /* Turn off power */
+
+ /* two bits - number of cycles for card detection */
+#define SD_CONFIG_CARDDETECTMODE_CLK ((x) & 0x3)
+
+
+#define ASIC3_SD_CTRL_Base 0x1000
+
+#define ASIC3_SD_CTRL_Cmd 0x00
+#define ASIC3_SD_CTRL_Arg0 0x08
+#define ASIC3_SD_CTRL_Arg1 0x0C
+#define ASIC3_SD_CTRL_StopInternal 0x10
+#define ASIC3_SD_CTRL_TransferSectorCount 0x14
+#define ASIC3_SD_CTRL_Response0 0x18
+#define ASIC3_SD_CTRL_Response1 0x1C
+#define ASIC3_SD_CTRL_Response2 0x20
+#define ASIC3_SD_CTRL_Response3 0x24
+#define ASIC3_SD_CTRL_Response4 0x28
+#define ASIC3_SD_CTRL_Response5 0x2C
+#define ASIC3_SD_CTRL_Response6 0x30
+#define ASIC3_SD_CTRL_Response7 0x34
+#define ASIC3_SD_CTRL_CardStatus 0x38
+#define ASIC3_SD_CTRL_BufferCtrl 0x3C
+#define ASIC3_SD_CTRL_IntMaskCard 0x40
+#define ASIC3_SD_CTRL_IntMaskBuffer 0x44
+#define ASIC3_SD_CTRL_CardClockCtrl 0x48
+#define ASIC3_SD_CTRL_MemCardXferDataLen 0x4C
+#define ASIC3_SD_CTRL_MemCardOptionSetup 0x50
+#define ASIC3_SD_CTRL_ErrorStatus0 0x58
+#define ASIC3_SD_CTRL_ErrorStatus1 0x5C
+#define ASIC3_SD_CTRL_DataPort 0x60
+#define ASIC3_SD_CTRL_TransactionCtrl 0x68
+#define ASIC3_SD_CTRL_SoftwareReset 0x1C0
+
+#define SD_CTRL_SOFTWARE_RESET_CLEAR (1<<0)
+
+#define SD_CTRL_TRANSACTIONCONTROL_SET (1<<8)
+
+#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD (1<<15)
+#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK (1<<8)
+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512 (1<<7)
+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256 (1<<6)
+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128 (1<<5)
+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64 (1<<4)
+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32 (1<<3)
+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16 (1<<2)
+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8 (1<<1)
+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4 (1<<0)
+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2 (0<<0)
+
+#define MEM_CARD_OPTION_REQUIRED 0x000e
+#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x) (((x) & 0x0f) << 4)
+#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT (1<<14)
+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1 (1<<15)
+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4 0
+
+#define SD_CTRL_COMMAND_INDEX(x) ((x) & 0x3f)
+#define SD_CTRL_COMMAND_TYPE_CMD (0 << 6)
+#define SD_CTRL_COMMAND_TYPE_ACMD (1 << 6)
+#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION (2 << 6)
+#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL (0 << 8)
+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1 (4 << 8)
+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B (5 << 8)
+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2 (6 << 8)
+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3 (7 << 8)
+#define SD_CTRL_COMMAND_DATA_PRESENT (1 << 11)
+#define SD_CTRL_COMMAND_TRANSFER_READ (1 << 12)
+#define SD_CTRL_COMMAND_TRANSFER_WRITE (0 << 12)
+#define SD_CTRL_COMMAND_MULTI_BLOCK (1 << 13)
+#define SD_CTRL_COMMAND_SECURITY_CMD (1 << 14)
+
+#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12 (1 << 0)
+#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12 (1 << 8)
+
+#define SD_CTRL_CARDSTATUS_RESPONSE_END (1 << 0)
+#define SD_CTRL_CARDSTATUS_RW_END (1 << 2)
+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0 (1 << 3)
+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0 (1 << 4)
+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0 (1 << 5)
+#define SD_CTRL_CARDSTATUS_WRITE_PROTECT (1 << 7)
+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3 (1 << 8)
+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3 (1 << 9)
+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3 (1 << 10)
+
+#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR (1 << 0)
+#define SD_CTRL_BUFFERSTATUS_CRC_ERROR (1 << 1)
+#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR (1 << 2)
+#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT (1 << 3)
+#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW (1 << 4)
+#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW (1 << 5)
+#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT (1 << 6)
+#define SD_CTRL_BUFFERSTATUS_UNK7 (1 << 7)
+#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE (1 << 8)
+#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE (1 << 9)
+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION (1 << 13)
+#define SD_CTRL_BUFFERSTATUS_CMD_BUSY (1 << 14)
+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS (1 << 15)
+
+#define SD_CTRL_INTMASKCARD_RESPONSE_END (1 << 0)
+#define SD_CTRL_INTMASKCARD_RW_END (1 << 2)
+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0 (1 << 3)
+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0 (1 << 4)
+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5)
+#define SD_CTRL_INTMASKCARD_UNK6 (1 << 6)
+#define SD_CTRL_INTMASKCARD_WRITE_PROTECT (1 << 7)
+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3 (1 << 8)
+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3 (1 << 9)
+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10)
+
+#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR (1 << 0)
+#define SD_CTRL_INTMASKBUFFER_CRC_ERROR (1 << 1)
+#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR (1 << 2)
+#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT (1 << 3)
+#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW (1 << 4)
+#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW (1 << 5)
+#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT (1 << 6)
+#define SD_CTRL_INTMASKBUFFER_UNK7 (1 << 7)
+#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE (1 << 8)
+#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE (1 << 9)
+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION (1 << 13)
+#define SD_CTRL_INTMASKBUFFER_CMD_BUSY (1 << 14)
+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS (1 << 15)
+
+#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR (1 << 0)
+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2)
+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12 (1 << 3)
+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA (1 << 4)
+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS (1 << 5)
+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 8)
+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12 (1 << 9)
+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA (1 << 10)
+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD (1 << 11)
+
+#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE (1 << 0)
+#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA (1 << 4)
+#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS (1 << 5)
+#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY (1 << 6)
+
+#define ASIC3_SDIO_CTRL_Base 0x1200
+
+#define ASIC3_SDIO_CTRL_Cmd 0x00
+#define ASIC3_SDIO_CTRL_CardPortSel 0x04
+#define ASIC3_SDIO_CTRL_Arg0 0x08
+#define ASIC3_SDIO_CTRL_Arg1 0x0C
+#define ASIC3_SDIO_CTRL_TransferBlockCount 0x14
+#define ASIC3_SDIO_CTRL_Response0 0x18
+#define ASIC3_SDIO_CTRL_Response1 0x1C
+#define ASIC3_SDIO_CTRL_Response2 0x20
+#define ASIC3_SDIO_CTRL_Response3 0x24
+#define ASIC3_SDIO_CTRL_Response4 0x28
+#define ASIC3_SDIO_CTRL_Response5 0x2C
+#define ASIC3_SDIO_CTRL_Response6 0x30
+#define ASIC3_SDIO_CTRL_Response7 0x34
+#define ASIC3_SDIO_CTRL_CardStatus 0x38
+#define ASIC3_SDIO_CTRL_BufferCtrl 0x3C
+#define ASIC3_SDIO_CTRL_IntMaskCard 0x40
+#define ASIC3_SDIO_CTRL_IntMaskBuffer 0x44
+#define ASIC3_SDIO_CTRL_CardXferDataLen 0x4C
+#define ASIC3_SDIO_CTRL_CardOptionSetup 0x50
+#define ASIC3_SDIO_CTRL_ErrorStatus0 0x54
+#define ASIC3_SDIO_CTRL_ErrorStatus1 0x58
+#define ASIC3_SDIO_CTRL_DataPort 0x60
+#define ASIC3_SDIO_CTRL_TransactionCtrl 0x68
+#define ASIC3_SDIO_CTRL_CardIntCtrl 0x6C
+#define ASIC3_SDIO_CTRL_ClocknWaitCtrl 0x70
+#define ASIC3_SDIO_CTRL_HostInformation 0x74
+#define ASIC3_SDIO_CTRL_ErrorCtrl 0x78
+#define ASIC3_SDIO_CTRL_LEDCtrl 0x7C
+#define ASIC3_SDIO_CTRL_SoftwareReset 0x1C0
+
+#define ASIC3_MAP_SIZE 0x2000
+
+#endif /* __ASIC3_H__ */