summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/net/nfc/st95hf.txt50
-rw-r--r--MAINTAINERS5
-rw-r--r--drivers/nfc/Kconfig1
-rw-r--r--drivers/nfc/Makefile1
-rw-r--r--drivers/nfc/fdp/i2c.c12
-rw-r--r--drivers/nfc/microread/i2c.c2
-rw-r--r--drivers/nfc/nfcsim.c10
-rw-r--r--drivers/nfc/nxp-nci/i2c.c34
-rw-r--r--drivers/nfc/pn544/i2c.c46
-rw-r--r--drivers/nfc/s3fwrn5/core.c2
-rw-r--r--drivers/nfc/s3fwrn5/i2c.c2
-rw-r--r--drivers/nfc/s3fwrn5/s3fwrn5.h4
-rw-r--r--drivers/nfc/st-nci/Kconfig18
-rw-r--r--drivers/nfc/st-nci/i2c.c80
-rw-r--r--drivers/nfc/st-nci/ndlc.c1
-rw-r--r--drivers/nfc/st-nci/se.c3
-rw-r--r--drivers/nfc/st-nci/spi.c81
-rw-r--r--drivers/nfc/st21nfca/Kconfig13
-rw-r--r--drivers/nfc/st21nfca/i2c.c80
-rw-r--r--drivers/nfc/st21nfca/se.c5
-rw-r--r--drivers/nfc/st95hf/Kconfig10
-rw-r--r--drivers/nfc/st95hf/Makefile6
-rw-r--r--drivers/nfc/st95hf/core.c1273
-rw-r--r--drivers/nfc/st95hf/spi.c167
-rw-r--r--drivers/nfc/st95hf/spi.h64
-rw-r--r--drivers/nfc/trf7970a.c8
-rw-r--r--include/linux/platform_data/microread.h2
-rw-r--r--include/net/nfc/nfc.h1
-rw-r--r--net/nfc/core.c13
-rw-r--r--net/nfc/digital_core.c3
-rw-r--r--net/nfc/nci/core.c6
-rw-r--r--net/nfc/nci/hci.c2
-rw-r--r--net/nfc/netlink.c37
-rw-r--r--net/nfc/nfc.h1
34 files changed, 1862 insertions, 181 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
new file mode 100644
index 000000000000..ea3178bc9ddd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
@@ -0,0 +1,50 @@
+* STMicroelectronics : NFC Transceiver ST95HF
+
+ST NFC Transceiver is required to attach with SPI bus.
+ST95HF node should be defined in DT as SPI slave device of SPI
+master with which ST95HF transceiver is physically connected.
+The properties defined below are required to be the part of DT
+to include ST95HF transceiver into the platform.
+
+Required properties:
+===================
+- reg: Address of SPI slave "ST95HF transceiver" on SPI master bus.
+
+- compatible: should be "st,st95hf" for ST95HF NFC transceiver
+
+- spi-max-frequency: Max. operating SPI frequency for ST95HF
+ transceiver.
+
+- enable-gpio: GPIO line to enable ST95HF transceiver.
+
+- interrupt-parent : Standard way to specify the controller to which
+ ST95HF transceiver's interrupt is routed.
+
+- interrupts : Standard way to define ST95HF transceiver's out
+ interrupt.
+
+Optional property:
+=================
+- st95hfvin-supply : This is an optional property. It contains a
+ phandle to ST95HF transceiver's regulator supply node in DT.
+
+Example:
+=======
+spi@9840000 {
+ reg = <0x9840000 0x110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&pio0 4>;
+ status = "okay";
+
+ st95hf@0{
+ reg = <0>;
+ compatible = "st,st95hf";
+ status = "okay";
+ spi-max-frequency = <1000000>;
+ enable-gpio = <&pio4 0>;
+ interrupt-parent = <&pio0>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index b74287301edf..74b84d44ee98 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7523,7 +7523,12 @@ F: net/nfc/
F: include/net/nfc/
F: include/uapi/linux/nfc.h
F: drivers/nfc/
+F: include/linux/platform_data/microread.h
+F: include/linux/platform_data/nfcmrvl.h
+F: include/linux/platform_data/nxp-nci.h
F: include/linux/platform_data/pn544.h
+F: include/linux/platform_data/st21nfca.h
+F: include/linux/platform_data/st-nci.h
F: Documentation/devicetree/bindings/net/nfc/
NFS, SUNRPC, AND LOCKD CLIENTS
diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
index 0d6003dee3af..7437c9dfd8fc 100644
--- a/drivers/nfc/Kconfig
+++ b/drivers/nfc/Kconfig
@@ -76,4 +76,5 @@ source "drivers/nfc/st21nfca/Kconfig"
source "drivers/nfc/st-nci/Kconfig"
source "drivers/nfc/nxp-nci/Kconfig"
source "drivers/nfc/s3fwrn5/Kconfig"
+source "drivers/nfc/st95hf/Kconfig"
endmenu
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
index e3621416a48e..0a99e67daa10 100644
--- a/drivers/nfc/Makefile
+++ b/drivers/nfc/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_NFC_ST21NFCA) += st21nfca/
obj-$(CONFIG_NFC_ST_NCI) += st-nci/
obj-$(CONFIG_NFC_NXP_NCI) += nxp-nci/
obj-$(CONFIG_NFC_S3FWRN5) += s3fwrn5/
+obj-$(CONFIG_NFC_ST95HF) += st95hf/
diff --git a/drivers/nfc/fdp/i2c.c b/drivers/nfc/fdp/i2c.c
index 532db28145c7..5e797d5c38ed 100644
--- a/drivers/nfc/fdp/i2c.c
+++ b/drivers/nfc/fdp/i2c.c
@@ -298,6 +298,12 @@ static int fdp_nci_i2c_probe(struct i2c_client *client,
return -ENODEV;
}
+ /* Checking if we have an irq */
+ if (client->irq <= 0) {
+ nfc_err(dev, "IRQ not present\n");
+ return -ENODEV;
+ }
+
phy = devm_kzalloc(dev, sizeof(struct fdp_i2c_phy),
GFP_KERNEL);
if (!phy)
@@ -307,12 +313,6 @@ static int fdp_nci_i2c_probe(struct i2c_client *client,
phy->next_read_size = FDP_NCI_I2C_MIN_PAYLOAD;
i2c_set_clientdata(client, phy);
- /* Checking if we have an irq */
- if (client->irq <= 0) {
- dev_err(dev, "IRQ not present\n");
- return -ENODEV;
- }
-
r = request_threaded_irq(client->irq, NULL, fdp_nci_i2c_irq_thread_fn,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
FDP_I2C_DRIVER_NAME, phy);
diff --git a/drivers/nfc/microread/i2c.c b/drivers/nfc/microread/i2c.c
index daf352597ef8..918e8f2eac47 100644
--- a/drivers/nfc/microread/i2c.c
+++ b/drivers/nfc/microread/i2c.c
@@ -50,8 +50,6 @@ struct microread_i2c_phy {
struct i2c_client *i2c_dev;
struct nfc_hci_dev *hdev;
- int irq;
-
int hard_fault; /*
* < 0 if hardware error occured (e.g. i2c err)
* and prevents normal operation.
diff --git a/drivers/nfc/nfcsim.c b/drivers/nfc/nfcsim.c
index 26ac9e5fa1ab..93aaca586858 100644
--- a/drivers/nfc/nfcsim.c
+++ b/drivers/nfc/nfcsim.c
@@ -32,6 +32,8 @@
#define NFCSIM_POLL_TARGET 2
#define NFCSIM_POLL_DUAL (NFCSIM_POLL_INITIATOR | NFCSIM_POLL_TARGET)
+#define RX_DEFAULT_DELAY 5
+
struct nfcsim {
struct nfc_dev *nfc_dev;
@@ -51,6 +53,8 @@ struct nfcsim {
u8 initiator;
+ u32 rx_delay;
+
data_exchange_cb_t cb;
void *cb_context;
@@ -320,10 +324,9 @@ static int nfcsim_tx(struct nfc_dev *nfc_dev, struct nfc_target *target,
* If packet transmission occurs immediately between them, we have a
* non-stop flow of several tens of thousands SYMM packets per second
* and a burning cpu.
- *
- * TODO: Add support for a sysfs entry to control this delay.
*/
- queue_delayed_work(wq, &peer->recv_work, msecs_to_jiffies(5));
+ queue_delayed_work(wq, &peer->recv_work,
+ msecs_to_jiffies(dev->rx_delay));
mutex_unlock(&peer->lock);
@@ -461,6 +464,7 @@ static struct nfcsim *nfcsim_init_dev(void)
if (rc)
goto free_nfc_dev;
+ dev->rx_delay = RX_DEFAULT_DELAY;
return dev;
free_nfc_dev:
diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
index df4333c7ee0f..11520f472f98 100644
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -52,7 +52,6 @@ struct nxp_nci_i2c_phy {
unsigned int gpio_en;
unsigned int gpio_fw;
- unsigned int gpio_irq;
int hard_fault; /*
* < 0 if hardware error occurred (e.g. i2c err)
@@ -85,7 +84,7 @@ static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb)
return phy->hard_fault;
r = i2c_master_send(client, skb->data, skb->len);
- if (r == -EREMOTEIO) {
+ if (r < 0) {
/* Retry, chip was in standby */
usleep_range(110000, 120000);
r = i2c_master_send(client, skb->data, skb->len);
@@ -264,8 +263,6 @@ exit_irq_none:
return IRQ_NONE;
}
-#ifdef CONFIG_OF
-
static int nxp_nci_i2c_parse_devtree(struct i2c_client *client)
{
struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client);
@@ -294,48 +291,24 @@ static int nxp_nci_i2c_parse_devtree(struct i2c_client *client)
}
phy->gpio_fw = r;
- r = irq_of_parse_and_map(pp, 0);
- if (r < 0) {
- nfc_err(&client->dev, "Unable to get irq, error: %d\n", r);
- return r;
- }
- client->irq = r;
-
return 0;
}
-#else
-
-static int nxp_nci_i2c_parse_devtree(struct i2c_client *client)
-{
- return -ENODEV;
-}
-
-#endif
-
static int nxp_nci_i2c_acpi_config(struct nxp_nci_i2c_phy *phy)
{
struct i2c_client *client = phy->i2c_dev;
- struct gpio_desc *gpiod_en, *gpiod_fw, *gpiod_irq;
+ struct gpio_desc *gpiod_en, *gpiod_fw;
gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW);
gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW);
- gpiod_irq = devm_gpiod_get_index(&client->dev, NULL, 0, GPIOD_IN);
- if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw) || IS_ERR(gpiod_irq)) {
+ if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw)) {
nfc_err(&client->dev, "No GPIOs\n");
return -EINVAL;
}
- client->irq = gpiod_to_irq(gpiod_irq);
- if (client->irq < 0) {
- nfc_err(&client->dev, "No IRQ\n");
- return -EINVAL;
- }
-
phy->gpio_en = desc_to_gpio(gpiod_en);
phy->gpio_fw = desc_to_gpio(gpiod_fw);
- phy->gpio_irq = desc_to_gpio(gpiod_irq);
return 0;
}
@@ -374,7 +347,6 @@ static int nxp_nci_i2c_probe(struct i2c_client *client,
} else if (pdata) {
phy->gpio_en = pdata->gpio_en;
phy->gpio_fw = pdata->gpio_fw;
- client->irq = pdata->irq;
} else if (ACPI_HANDLE(&client->dev)) {
r = nxp_nci_i2c_acpi_config(phy);
if (r < 0)
diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c
index fa75c53f3fa5..76c318444304 100644
--- a/drivers/nfc/pn544/i2c.c
+++ b/drivers/nfc/pn544/i2c.c
@@ -166,7 +166,6 @@ struct pn544_i2c_phy {
struct nfc_hci_dev *hdev;
unsigned int gpio_en;
- unsigned int gpio_irq;
unsigned int gpio_fw;
unsigned int en_polarity;
@@ -879,9 +878,8 @@ static int pn544_hci_i2c_acpi_request_resources(struct i2c_client *client)
{
struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
const struct acpi_device_id *id;
- struct gpio_desc *gpiod_en, *gpiod_irq, *gpiod_fw;
+ struct gpio_desc *gpiod_en, *gpiod_fw;
struct device *dev;
- int ret;
if (!client)
return -EINVAL;
@@ -914,32 +912,9 @@ static int pn544_hci_i2c_acpi_request_resources(struct i2c_client *client)
phy->gpio_fw = desc_to_gpio(gpiod_fw);
- /* Get IRQ GPIO */
- gpiod_irq = devm_gpiod_get_index(dev, PN544_GPIO_NAME_IRQ, 0,
- GPIOD_IN);
- if (IS_ERR(gpiod_irq)) {
- nfc_err(dev, "Unable to get IRQ GPIO\n");
- return -ENODEV;
- }
-
- phy->gpio_irq = desc_to_gpio(gpiod_irq);
-
- /* Map the pin to an IRQ */
- ret = gpiod_to_irq(gpiod_irq);
- if (ret < 0) {
- nfc_err(dev, "Fail pin IRQ mapping\n");
- return ret;
- }
-
- nfc_info(dev, "GPIO resource, no:%d irq:%d\n",
- desc_to_gpio(gpiod_irq), ret);
- client->irq = ret;
-
return 0;
}
-#ifdef CONFIG_OF
-
static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
{
struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
@@ -996,15 +971,6 @@ static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
goto err_gpio_fw;
}
- /* IRQ */
- ret = irq_of_parse_and_map(pp, 0);
- if (ret < 0) {
- nfc_err(&client->dev,
- "Unable to get irq, error: %d\n", ret);
- goto err_gpio_fw;
- }
- client->irq = ret;
-
return 0;
err_gpio_fw:
@@ -1015,15 +981,6 @@ err_dt:
return ret;
}
-#else
-
-static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
-{
- return -ENODEV;
-}
-
-#endif
-
static int pn544_hci_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1076,7 +1033,6 @@ static int pn544_hci_i2c_probe(struct i2c_client *client,
phy->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE);
phy->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET);
- phy->gpio_irq = pdata->get_gpio(NFC_GPIO_IRQ);
/* Using ACPI */
} else if (ACPI_HANDLE(&client->dev)) {
r = pn544_hci_i2c_acpi_request_resources(client);
diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c
index 0d866ca295e3..9d9c8d57a042 100644
--- a/drivers/nfc/s3fwrn5/core.c
+++ b/drivers/nfc/s3fwrn5/core.c
@@ -147,7 +147,7 @@ static struct nci_ops s3fwrn5_nci_ops = {
};
int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev,
- struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload)
+ const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload)
{
struct s3fwrn5_info *info;
int ret;
diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
index c61d8a308da4..3ed0adf6479b 100644
--- a/drivers/nfc/s3fwrn5/i2c.c
+++ b/drivers/nfc/s3fwrn5/i2c.c
@@ -125,7 +125,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
return 0;
}
-static struct s3fwrn5_phy_ops i2c_phy_ops = {
+static const struct s3fwrn5_phy_ops i2c_phy_ops = {
.set_wake = s3fwrn5_i2c_set_wake,
.set_mode = s3fwrn5_i2c_set_mode,
.get_mode = s3fwrn5_i2c_get_mode,
diff --git a/drivers/nfc/s3fwrn5/s3fwrn5.h b/drivers/nfc/s3fwrn5/s3fwrn5.h
index 89210d4828b8..7d5e516036fb 100644
--- a/drivers/nfc/s3fwrn5/s3fwrn5.h
+++ b/drivers/nfc/s3fwrn5/s3fwrn5.h
@@ -44,7 +44,7 @@ struct s3fwrn5_info {
void *phy_id;
struct device *pdev;
- struct s3fwrn5_phy_ops *phy_ops;
+ const struct s3fwrn5_phy_ops *phy_ops;
unsigned int max_payload;
struct s3fwrn5_fw_info fw_info;
@@ -90,7 +90,7 @@ static inline int s3fwrn5_write(struct s3fwrn5_info *info, struct sk_buff *skb)
}
int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev,
- struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload);
+ const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload);
void s3fwrn5_remove(struct nci_dev *ndev);
int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb,
diff --git a/drivers/nfc/st-nci/Kconfig b/drivers/nfc/st-nci/Kconfig
index e7c6db9c5860..dc9b777d78f6 100644
--- a/drivers/nfc/st-nci/Kconfig
+++ b/drivers/nfc/st-nci/Kconfig
@@ -1,19 +1,14 @@
config NFC_ST_NCI
- tristate "STMicroelectronics ST NCI NFC driver"
- depends on NFC_NCI
- default n
+ tristate
---help---
STMicroelectronics NFC NCI chips core driver. It implements the chipset
NCI logic and hooks into the NFC kernel APIs. Physical layers will
register against it.
- To compile this driver as a module, choose m here. The module will
- be called st-nci.
- Say N if unsure.
-
config NFC_ST_NCI_I2C
- tristate "NFC ST NCI i2c support"
- depends on NFC_ST_NCI && I2C
+ tristate "STMicroelectronics ST NCI NFC driver (I2C)"
+ depends on NFC_NCI && I2C
+ select NFC_ST_NCI
---help---
This module adds support for an I2C interface to the
STMicroelectronics NFC NCI chips familly.
@@ -23,8 +18,9 @@ config NFC_ST_NCI_I2C
Say N if unsure.
config NFC_ST_NCI_SPI
- tristate "NFC ST NCI spi support"
- depends on NFC_ST_NCI && SPI
+ tristate "STMicroelectronics ST NCI NFC driver (SPI)"
+ depends on NFC_NCI && SPI
+ select NFC_ST_NCI
---help---
This module adds support for an SPI interface to the
STMicroelectronics NFC NCI chips familly.
diff --git a/drivers/nfc/st-nci/i2c.c b/drivers/nfc/st-nci/i2c.c
index 15e3ce2d274c..8a56b5c6e4c4 100644
--- a/drivers/nfc/st-nci/i2c.c
+++ b/drivers/nfc/st-nci/i2c.c
@@ -20,8 +20,10 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
+#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/nfc.h>
@@ -40,11 +42,7 @@
#define ST_NCI_I2C_DRIVER_NAME "st_nci_i2c"
-static struct i2c_device_id st_nci_i2c_id_table[] = {
- {ST_NCI_DRIVER_NAME, 0},
- {}
-};
-MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table);
+#define ST_NCI_GPIO_NAME_RESET "clf_reset"
struct st_nci_i2c_phy {
struct i2c_client *i2c_dev;
@@ -210,7 +208,43 @@ static struct nfc_phy_ops i2c_phy_ops = {
.disable = st_nci_i2c_disable,
};
-#ifdef CONFIG_OF
+static int st_nci_i2c_acpi_request_resources(struct i2c_client *client)
+{
+ struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
+ const struct acpi_device_id *id;
+ struct gpio_desc *gpiod_reset;
+ struct device *dev;
+
+ if (!client)
+ return -EINVAL;
+
+ dev = &client->dev;
+
+ /* Match the struct device against a given list of ACPI IDs */
+ id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!id)
+ return -ENODEV;
+
+ /* Get RESET GPIO from ACPI */
+ gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1,
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_reset)) {
+ nfc_err(dev, "Unable to get RESET GPIO\n");
+ return -ENODEV;
+ }
+
+ phy->gpio_reset = desc_to_gpio(gpiod_reset);
+
+ phy->irq_polarity = irq_get_trigger_type(client->irq);
+
+ phy->se_status.is_ese_present =
+ device_property_present(dev, "ese-present");
+ phy->se_status.is_uicc_present =
+ device_property_present(dev, "uicc-present");
+
+ return 0;
+}
+
static int st_nci_i2c_of_request_resources(struct i2c_client *client)
{
struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
@@ -232,7 +266,7 @@ static int st_nci_i2c_of_request_resources(struct i2c_client *client)
/* GPIO request and configuration */
r = devm_gpio_request_one(&client->dev, gpio,
- GPIOF_OUT_INIT_HIGH, "clf_reset");
+ GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET);
if (r) {
nfc_err(&client->dev, "Failed to request reset pin\n");
return r;
@@ -248,12 +282,6 @@ static int st_nci_i2c_of_request_resources(struct i2c_client *client)
return 0;
}
-#else
-static int st_nci_i2c_of_request_resources(struct i2c_client *client)
-{
- return -ENODEV;
-}
-#endif
static int st_nci_i2c_request_resources(struct i2c_client *client)
{
@@ -272,7 +300,8 @@ static int st_nci_i2c_request_resources(struct i2c_client *client)
phy->irq_polarity = pdata->irq_polarity;
r = devm_gpio_request_one(&client->dev,
- phy->gpio_reset, GPIOF_OUT_INIT_HIGH, "clf_reset");
+ phy->gpio_reset, GPIOF_OUT_INIT_HIGH,
+ ST_NCI_GPIO_NAME_RESET);
if (r) {
pr_err("%s : reset gpio_request failed\n", __FILE__);
return r;
@@ -322,6 +351,12 @@ static int st_nci_i2c_probe(struct i2c_client *client,
"Cannot get platform resources\n");
return r;
}
+ } else if (ACPI_HANDLE(&client->dev)) {
+ r = st_nci_i2c_acpi_request_resources(client);
+ if (r) {
+ nfc_err(&client->dev, "Cannot get ACPI data\n");
+ return r;
+ }
} else {
nfc_err(&client->dev,
"st_nci platform resources not available\n");
@@ -358,7 +393,19 @@ static int st_nci_i2c_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_OF
+static struct i2c_device_id st_nci_i2c_id_table[] = {
+ {ST_NCI_DRIVER_NAME, 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table);
+
+static const struct acpi_device_id st_nci_i2c_acpi_match[] = {
+ {"SMO2101"},
+ {"SMO2102"},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, st_nci_i2c_acpi_match);
+
static const struct of_device_id of_st_nci_i2c_match[] = {
{ .compatible = "st,st21nfcb-i2c", },
{ .compatible = "st,st21nfcb_i2c", },
@@ -366,19 +413,18 @@ static const struct of_device_id of_st_nci_i2c_match[] = {
{}
};
MODULE_DEVICE_TABLE(of, of_st_nci_i2c_match);
-#endif
static struct i2c_driver st_nci_i2c_driver = {
.driver = {
.owner = THIS_MODULE,
.name = ST_NCI_I2C_DRIVER_NAME,
.of_match_table = of_match_ptr(of_st_nci_i2c_match),
+ .acpi_match_table = ACPI_PTR(st_nci_i2c_acpi_match),
},
.probe = st_nci_i2c_probe,
.id_table = st_nci_i2c_id_table,
.remove = st_nci_i2c_remove,
};
-
module_i2c_driver(st_nci_i2c_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/st-nci/ndlc.c b/drivers/nfc/st-nci/ndlc.c
index 0884b11001ef..50880d747b02 100644
--- a/drivers/nfc/st-nci/ndlc.c
+++ b/drivers/nfc/st-nci/ndlc.c
@@ -20,7 +20,6 @@
#include <net/nfc/nci_core.h>
#include "st-nci.h"
-#include "ndlc.h"
#define NDLC_TIMER_T1 100
#define NDLC_TIMER_T1_WAIT 400
diff --git a/drivers/nfc/st-nci/se.c b/drivers/nfc/st-nci/se.c
index dbab722a0654..a53e5df803eb 100644
--- a/drivers/nfc/st-nci/se.c
+++ b/drivers/nfc/st-nci/se.c
@@ -331,7 +331,7 @@ static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev,
switch (event) {
case ST_NCI_EVT_CONNECTIVITY:
-
+ r = nfc_se_connectivity(ndev->nfc_dev, host);
break;
case ST_NCI_EVT_TRANSACTION:
/* According to specification etsi 102 622
@@ -392,7 +392,6 @@ void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe,
}
EXPORT_SYMBOL_GPL(st_nci_hci_event_received);
-
void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
struct sk_buff *skb)
{
diff --git a/drivers/nfc/st-nci/spi.c b/drivers/nfc/st-nci/spi.c
index d6519bb9dba5..821dfa950fa8 100644
--- a/drivers/nfc/st-nci/spi.c
+++ b/drivers/nfc/st-nci/spi.c
@@ -20,8 +20,10 @@
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
+#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/nfc.h>
@@ -34,18 +36,14 @@
/* ndlc header */
#define ST_NCI_FRAME_HEADROOM 1
-#define ST_NCI_FRAME_TAILROOM 0
+#define ST_NCI_FRAME_TAILROOM 0
#define ST_NCI_SPI_MIN_SIZE 4 /* PCB(1) + NCI Packet header(3) */
#define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */
#define ST_NCI_SPI_DRIVER_NAME "st_nci_spi"
-static struct spi_device_id st_nci_spi_id_table[] = {
- {ST_NCI_SPI_DRIVER_NAME, 0},
- {}
-};
-MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table);
+#define ST_NCI_GPIO_NAME_RESET "clf_reset"
struct st_nci_spi_phy {
struct spi_device *spi_dev;
@@ -225,7 +223,43 @@ static struct nfc_phy_ops spi_phy_ops = {
.disable = st_nci_spi_disable,
};
-#ifdef CONFIG_OF
+static int st_nci_spi_acpi_request_resources(struct spi_device *spi_dev)
+{
+ struct st_nci_spi_phy *phy = spi_get_drvdata(spi_dev);
+ const struct acpi_device_id *id;
+ struct gpio_desc *gpiod_reset;
+ struct device *dev;
+
+ if (!spi_dev)
+ return -EINVAL;
+
+ dev = &spi_dev->dev;
+
+ /* Match the struct device against a given list of ACPI IDs */
+ id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!id)
+ return -ENODEV;
+
+ /* Get RESET GPIO from ACPI */
+ gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1,
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_reset)) {
+ nfc_err(dev, "Unable to get RESET GPIO\n");
+ return -ENODEV;
+ }
+
+ phy->gpio_reset = desc_to_gpio(gpiod_reset);
+
+ phy->irq_polarity = irq_get_trigger_type(spi_dev->irq);
+
+ phy->se_status.is_ese_present =
+ device_property_present(dev, "ese-present");
+ phy->se_status.is_uicc_present =
+ device_property_present(dev, "uicc-present");
+
+ return 0;
+}
+
static int st_nci_spi_of_request_resources(struct spi_device *dev)
{
struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
@@ -247,7 +281,7 @@ static int st_nci_spi_of_request_resources(struct spi_device *dev)
/* GPIO request and configuration */
r = devm_gpio_request_one(&dev->dev, gpio,
- GPIOF_OUT_INIT_HIGH, "clf_reset");
+ GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET);
if (r) {
nfc_err(&dev->dev, "Failed to request reset pin\n");
return r;
@@ -263,12 +297,6 @@ static int st_nci_spi_of_request_resources(struct spi_device *dev)
return 0;
}
-#else
-static int st_nci_spi_of_request_resources(struct spi_device *dev)
-{
- return -ENODEV;
-}
-#endif
static int st_nci_spi_request_resources(struct spi_device *dev)
{
@@ -287,7 +315,8 @@ static int st_nci_spi_request_resources(struct spi_device *dev)
phy->irq_polarity = pdata->irq_polarity;
r = devm_gpio_request_one(&dev->dev,
- phy->gpio_reset, GPIOF_OUT_INIT_HIGH, "clf_reset");
+ phy->gpio_reset, GPIOF_OUT_INIT_HIGH,
+ ST_NCI_GPIO_NAME_RESET);
if (r) {
pr_err("%s : reset gpio_request failed\n", __FILE__);
return r;
@@ -338,6 +367,12 @@ static int st_nci_spi_probe(struct spi_device *dev)
"Cannot get platform resources\n");
return r;
}
+ } else if (ACPI_HANDLE(&dev->dev)) {
+ r = st_nci_spi_acpi_request_resources(dev);
+ if (r) {
+ nfc_err(&dev->dev, "Cannot get ACPI data\n");
+ return r;
+ }
} else {
nfc_err(&dev->dev,
"st_nci platform resources not available\n");
@@ -374,24 +409,34 @@ static int st_nci_spi_remove(struct spi_device *dev)
return 0;
}
-#ifdef CONFIG_OF
+static struct spi_device_id st_nci_spi_id_table[] = {
+ {ST_NCI_SPI_DRIVER_NAME, 0},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table);
+
+static const struct acpi_device_id st_nci_spi_acpi_match[] = {
+ {"SMO2101", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, st_nci_spi_acpi_match);
+
static const struct of_device_id of_st_nci_spi_match[] = {
{ .compatible = "st,st21nfcb-spi", },
{}
};
MODULE_DEVICE_TABLE(of, of_st_nci_spi_match);
-#endif
static struct spi_driver st_nci_spi_driver = {
.driver = {
.name = ST_NCI_SPI_DRIVER_NAME,
.of_match_table = of_match_ptr(of_st_nci_spi_match),
+ .acpi_match_table = ACPI_PTR(st_nci_spi_acpi_match),
},
.probe = st_nci_spi_probe,
.id_table = st_nci_spi_id_table,
.remove = st_nci_spi_remove,
};
-
module_spi_driver(st_nci_spi_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/st21nfca/Kconfig b/drivers/nfc/st21nfca/Kconfig
index ee459f066ade..cc3bd5658901 100644
--- a/drivers/nfc/st21nfca/Kconfig
+++ b/drivers/nfc/st21nfca/Kconfig
@@ -1,20 +1,15 @@
config NFC_ST21NFCA
- tristate "STMicroelectronics ST21NFCA NFC driver"
- depends on NFC_HCI
+ tristate
select CRC_CCITT
- default n
---help---
STMicroelectronics ST21NFCA core driver. It implements the chipset
HCI logic and hooks into the NFC kernel APIs. Physical layers will
register against it.
- To compile this driver as a module, choose m here. The module will
- be called st21nfca.
- Say N if unsure.
-
config NFC_ST21NFCA_I2C
- tristate "NFC ST21NFCA i2c support"
- depends on NFC_ST21NFCA && I2C && NFC_SHDLC
+ tristate "STMicroelectronics ST21NFCA NFC driver (I2C)"
+ depends on NFC_HCI && I2C && NFC_SHDLC
+ select NFC_ST21NFCA
---help---
This module adds support for the STMicroelectronics st21nfca i2c interface.
Select this if your platform is using the i2c bus.
diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
index a98da33e680a..1f44a151d206 100644
--- a/drivers/nfc/st21nfca/i2c.c
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -21,8 +21,10 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
+#include <linux/acpi.h>
#include <linux/miscdevice.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
@@ -60,12 +62,7 @@
#define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c"
-static struct i2c_device_id st21nfca_hci_i2c_id_table[] = {
- {ST21NFCA_HCI_DRIVER_NAME, 0},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table);
+#define ST21NFCA_GPIO_NAME_EN "clf_enable"
struct st21nfca_i2c_phy {
struct i2c_client *i2c_dev;
@@ -167,7 +164,6 @@ static void st21nfca_hci_i2c_disable(void *phy_id)
{
struct st21nfca_i2c_phy *phy = phy_id;
- pr_info("\n");
gpio_set_value(phy->gpio_ena, 0);
phy->powered = 0;
@@ -210,7 +206,6 @@ static int st21nfca_hci_i2c_write(void *phy_id, struct sk_buff *skb)
I2C_DUMP_SKB("st21nfca_hci_i2c_write", skb);
-
if (phy->hard_fault != 0)
return phy->hard_fault;
@@ -509,7 +504,41 @@ static struct nfc_phy_ops i2c_phy_ops = {
.disable = st21nfca_hci_i2c_disable,
};
-#ifdef CONFIG_OF
+static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client)
+{
+ struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+ const struct acpi_device_id *id;
+ struct gpio_desc *gpiod_ena;
+ struct device *dev;
+
+ if (!client)
+ return -EINVAL;
+
+ dev = &client->dev;
+
+ /* Match the struct device against a given list of ACPI IDs */
+ id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!id)
+ return -ENODEV;
+
+ /* Get EN GPIO from ACPI */
+ gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 1,
+ GPIOD_OUT_LOW);
+ if (!IS_ERR(gpiod_ena))
+ phy->gpio_ena = desc_to_gpio(gpiod_ena);
+
+ phy->gpio_ena = desc_to_gpio(gpiod_ena);
+
+ phy->irq_polarity = irq_get_trigger_type(client->irq);
+
+ phy->se_status.is_ese_present =
+ device_property_present(dev, "ese-present");
+ phy->se_status.is_uicc_present =
+ device_property_present(dev, "uicc-present");
+
+ return 0;
+}
+
static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
{
struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
@@ -530,7 +559,7 @@ static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
/* GPIO request and configuration */
r = devm_gpio_request_one(&client->dev, gpio, GPIOF_OUT_INIT_HIGH,
- "clf_enable");
+ ST21NFCA_GPIO_NAME_EN);
if (r) {
nfc_err(&client->dev, "Failed to request enable pin\n");
return r;
@@ -547,12 +576,6 @@ static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
return 0;
}
-#else
-static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
-{
- return -ENODEV;
-}
-#endif
static int st21nfca_hci_i2c_request_resources(struct i2c_client *client)
{
@@ -572,7 +595,8 @@ static int st21nfca_hci_i2c_request_resources(struct i2c_client *client)
if (phy->gpio_ena > 0) {
r = devm_gpio_request_one(&client->dev, phy->gpio_ena,
- GPIOF_OUT_INIT_HIGH, "clf_enable");
+ GPIOF_OUT_INIT_HIGH,
+ ST21NFCA_GPIO_NAME_EN);
if (r) {
pr_err("%s : ena gpio_request failed\n", __FILE__);
return r;
@@ -628,6 +652,12 @@ static int st21nfca_hci_i2c_probe(struct i2c_client *client,
nfc_err(&client->dev, "Cannot get platform resources\n");
return r;
}
+ } else if (ACPI_HANDLE(&client->dev)) {
+ r = st21nfca_hci_i2c_acpi_request_resources(client);
+ if (r) {
+ nfc_err(&client->dev, "Cannot get ACPI data\n");
+ return r;
+ }
} else {
nfc_err(&client->dev, "st21nfca platform resources not available\n");
return -ENODEV;
@@ -670,26 +700,36 @@ static int st21nfca_hci_i2c_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_OF
+static struct i2c_device_id st21nfca_hci_i2c_id_table[] = {
+ {ST21NFCA_HCI_DRIVER_NAME, 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table);
+
+static const struct acpi_device_id st21nfca_hci_i2c_acpi_match[] = {
+ {"SMO2100", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, st21nfca_hci_i2c_acpi_match);
+
static const struct of_device_id of_st21nfca_i2c_match[] = {
{ .compatible = "st,st21nfca-i2c", },
{ .compatible = "st,st21nfca_i2c", },
{}
};
MODULE_DEVICE_TABLE(of, of_st21nfca_i2c_match);
-#endif
static struct i2c_driver st21nfca_hci_i2c_driver = {
.driver = {
.owner = THIS_MODULE,
.name = ST21NFCA_HCI_I2C_DRIVER_NAME,
.of_match_table = of_match_ptr(of_st21nfca_i2c_match),
+ .acpi_match_table = ACPI_PTR(st21nfca_hci_i2c_acpi_match),
},
.probe = st21nfca_hci_i2c_probe,
.id_table = st21nfca_hci_i2c_id_table,
.remove = st21nfca_hci_i2c_remove,
};
-
module_i2c_driver(st21nfca_hci_i2c_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/st21nfca/se.c b/drivers/nfc/st21nfca/se.c
index c79d99b24c96..bd56a16e4007 100644
--- a/drivers/nfc/st21nfca/se.c
+++ b/drivers/nfc/st21nfca/se.c
@@ -312,7 +312,8 @@ int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host,
switch (event) {
case ST21NFCA_EVT_CONNECTIVITY:
- break;
+ r = nfc_se_connectivity(hdev->ndev, host);
+ break;
case ST21NFCA_EVT_TRANSACTION:
/*
* According to specification etsi 102 622
@@ -342,7 +343,7 @@ int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host,
transaction->aid_len + 4, transaction->params_len);
r = nfc_se_transaction(hdev->ndev, host, transaction);
- break;
+ break;
default:
nfc_err(&hdev->ndev->dev, "Unexpected event on connectivity gate\n");
return 1;
diff --git a/drivers/nfc/st95hf/Kconfig b/drivers/nfc/st95hf/Kconfig
new file mode 100644
index 000000000000..224f266fdcb6
--- /dev/null
+++ b/drivers/nfc/st95hf/Kconfig
@@ -0,0 +1,10 @@
+config NFC_ST95HF
+ tristate "ST95HF NFC Transceiver driver"
+ depends on SPI && NFC_DIGITAL
+ help
+ This enables the ST NFC driver for ST95HF NFC transceiver.
+ This makes use of SPI framework to communicate with transceiver
+ and registered with NFC digital core to support Linux NFC framework.
+
+ Say Y here to compile support for ST NFC transceiver ST95HF
+ linux driver into the kernel or say M to compile it as module.
diff --git a/drivers/nfc/st95hf/Makefile b/drivers/nfc/st95hf/Makefile
new file mode 100644
index 000000000000..00760b38ab7e
--- /dev/null
+++ b/drivers/nfc/st95hf/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for STMicroelectronics NFC transceiver ST95HF
+#
+
+obj-$(CONFIG_NFC_ST95HF) += st95hf.o
+st95hf-objs := spi.o core.o
diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c
new file mode 100644
index 000000000000..c2840e412962
--- /dev/null
+++ b/drivers/nfc/st95hf/core.c
@@ -0,0 +1,1273 @@
+/*
+ * --------------------------------------------------------------------
+ * Driver for ST NFC Transceiver ST95HF
+ * --------------------------------------------------------------------
+ * Copyright (C) 2015 STMicroelectronics Pvt. Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/nfc.h>
+#include <linux/of_gpio.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/wait.h>
+#include <net/nfc/digital.h>
+#include <net/nfc/nfc.h>
+
+#include "spi.h"
+
+/* supported protocols */
+#define ST95HF_SUPPORTED_PROT (NFC_PROTO_ISO14443_MASK | \
+ NFC_PROTO_ISO14443_B_MASK | \
+ NFC_PROTO_ISO15693_MASK)
+/* driver capabilities */
+#define ST95HF_CAPABILITIES NFC_DIGITAL_DRV_CAPS_IN_CRC
+
+/* Command Send Interface */
+/* ST95HF_COMMAND_SEND CMD Ids */
+#define ECHO_CMD 0x55
+#define WRITE_REGISTER_CMD 0x9
+#define PROTOCOL_SELECT_CMD 0x2
+#define SEND_RECEIVE_CMD 0x4
+
+/* Select protocol codes */
+#define ISO15693_PROTOCOL_CODE 0x1
+#define ISO14443A_PROTOCOL_CODE 0x2
+#define ISO14443B_PROTOCOL_CODE 0x3
+
+/*
+ * head room len is 3
+ * 1 byte for control byte
+ * 1 byte for cmd
+ * 1 byte for size
+ */
+#define ST95HF_HEADROOM_LEN 3
+
+/*
+ * tailroom is 1 for ISO14443A
+ * and 0 for ISO14443B/ISO15693,
+ * hence the max value 1 should be
+ * taken.
+ */
+#define ST95HF_TAILROOM_LEN 1
+
+/* Command Response interface */
+#define MAX_RESPONSE_BUFFER_SIZE 280
+#define ECHORESPONSE 0x55
+#define ST95HF_ERR_MASK 0xF
+#define ST95HF_TIMEOUT_ERROR 0x87
+#define ST95HF_NFCA_CRC_ERR_MASK 0x20
+#define ST95HF_NFCB_CRC_ERR_MASK 0x01
+
+/* ST95HF transmission flag values */
+#define TRFLAG_NFCA_SHORT_FRAME 0x07
+#define TRFLAG_NFCA_STD_FRAME 0x08
+#define TRFLAG_NFCA_STD_FRAME_CRC 0x28
+
+/* Misc defs */
+#define HIGH 1
+#define LOW 0
+#define ISO14443A_RATS_REQ 0xE0
+#define RATS_TB1_PRESENT_MASK 0x20
+#define RATS_TA1_PRESENT_MASK 0x10
+#define TB1_FWI_MASK 0xF0
+#define WTX_REQ_FROM_TAG 0xF2
+
+#define MAX_CMD_LEN 0x7
+
+#define MAX_CMD_PARAMS 4
+struct cmd {
+ int cmd_len;
+ unsigned char cmd_id;
+ unsigned char no_cmd_params;
+ unsigned char cmd_params[MAX_CMD_PARAMS];
+ enum req_type req;
+};
+
+struct param_list {
+ int param_offset;
+ int new_param_val;
+};
+
+/*
+ * List of top-level cmds to be used internally by the driver.
+ * All these commands are build on top of ST95HF basic commands
+ * such as SEND_RECEIVE_CMD, PROTOCOL_SELECT_CMD, etc.
+ * These top level cmds are used internally while implementing various ops of
+ * digital layer/driver probe or extending the digital framework layer for
+ * features that are not yet implemented there, for example, WTX cmd handling.
+ */
+enum st95hf_cmd_list {
+ CMD_ECHO,
+ CMD_ISO14443A_CONFIG,
+ CMD_ISO14443A_DEMOGAIN,
+ CMD_ISO14443B_DEMOGAIN,
+ CMD_ISO14443A_PROTOCOL_SELECT,
+ CMD_ISO14443B_PROTOCOL_SELECT,
+ CMD_WTX_RESPONSE,
+ CMD_FIELD_OFF,
+ CMD_ISO15693_PROTOCOL_SELECT,
+};
+
+static const struct cmd cmd_array[] = {
+ [CMD_ECHO] = {
+ .cmd_len = 0x2,
+ .cmd_id = ECHO_CMD,
+ .no_cmd_params = 0,
+ .req = SYNC,
+ },
+ [CMD_ISO14443A_CONFIG] = {
+ .cmd_len = 0x7,
+ .cmd_id = WRITE_REGISTER_CMD,
+ .no_cmd_params = 0x4,
+ .cmd_params = {0x3A, 0x00, 0x5A, 0x04},
+ .req = SYNC,
+ },
+ [CMD_ISO14443A_DEMOGAIN] = {
+ .cmd_len = 0x7,
+ .cmd_id = WRITE_REGISTER_CMD,
+ .no_cmd_params = 0x4,
+ .cmd_params = {0x68, 0x01, 0x01, 0xDF},
+ .req = SYNC,
+ },
+ [CMD_ISO14443B_DEMOGAIN] = {
+ .cmd_len = 0x7,
+ .cmd_id = WRITE_REGISTER_CMD,
+ .no_cmd_params = 0x4,
+ .cmd_params = {0x68, 0x01, 0x01, 0x51},
+ .req = SYNC,
+ },
+ [CMD_ISO14443A_PROTOCOL_SELECT] = {
+ .cmd_len = 0x7,
+ .cmd_id = PROTOCOL_SELECT_CMD,
+ .no_cmd_params = 0x4,
+ .cmd_params = {ISO14443A_PROTOCOL_CODE, 0x00, 0x01, 0xA0},
+ .req = SYNC,
+ },
+ [CMD_ISO14443B_PROTOCOL_SELECT] = {
+ .cmd_len = 0x7,
+ .cmd_id = PROTOCOL_SELECT_CMD,
+ .no_cmd_params = 0x4,
+ .cmd_params = {ISO14443B_PROTOCOL_CODE, 0x01, 0x03, 0xFF},
+ .req = SYNC,
+ },
+ [CMD_WTX_RESPONSE] = {
+ .cmd_len = 0x6,
+ .cmd_id = SEND_RECEIVE_CMD,
+ .no_cmd_params = 0x3,
+ .cmd_params = {0xF2, 0x00, TRFLAG_NFCA_STD_FRAME_CRC},
+ .req = ASYNC,
+ },
+ [CMD_FIELD_OFF] = {
+ .cmd_len = 0x5,
+ .cmd_id = PROTOCOL_SELECT_CMD,
+ .no_cmd_params = 0x2,
+ .cmd_params = {0x0, 0x0},
+ .req = SYNC,
+ },
+ [CMD_ISO15693_PROTOCOL_SELECT] = {
+ .cmd_len = 0x5,
+ .cmd_id = PROTOCOL_SELECT_CMD,
+ .no_cmd_params = 0x2,
+ .cmd_params = {ISO15693_PROTOCOL_CODE, 0x0D},
+ .req = SYNC,
+ },
+};
+
+/* st95_digital_cmd_complete_arg stores client context */
+struct st95_digital_cmd_complete_arg {
+ struct sk_buff *skb_resp;
+ nfc_digital_cmd_complete_t complete_cb;
+ void *cb_usrarg;
+ bool rats;
+};
+
+/*
+ * structure containing ST95HF driver specific data.
+ * @spicontext: structure containing information required
+ * for spi communication between st95hf and host.
+ * @ddev: nfc digital device object.
+ * @nfcdev: nfc device object.
+ * @enable_gpio: gpio used to enable st95hf transceiver.
+ * @complete_cb_arg: structure to store various context information
+ * that is passed from nfc requesting thread to the threaded ISR.
+ * @st95hf_supply: regulator "consumer" for NFC device.
+ * @sendrcv_trflag: last byte of frame send by sendrecv command
+ * of st95hf. This byte contains transmission flag info.
+ * @exchange_lock: semaphore used for signaling the st95hf_remove
+ * function that the last outstanding async nfc request is finished.
+ * @rm_lock: mutex for ensuring safe access of nfc digital object
+ * from threaded ISR. Usage of this mutex avoids any race between
+ * deletion of the object from st95hf_remove() and its access from
+ * the threaded ISR.
+ * @nfcdev_free: flag to have the state of nfc device object.
+ * [alive | died]
+ * @current_protocol: current nfc protocol.
+ * @current_rf_tech: current rf technology.
+ * @fwi: frame waiting index, received in reply of RATS according to
+ * digital protocol.
+ */
+struct st95hf_context {
+ struct st95hf_spi_context spicontext;
+ struct nfc_digital_dev *ddev;
+ struct nfc_dev *nfcdev;
+ unsigned int enable_gpio;
+ struct st95_digital_cmd_complete_arg complete_cb_arg;
+ struct regulator *st95hf_supply;
+ unsigned char sendrcv_trflag;
+ struct semaphore exchange_lock;
+ struct mutex rm_lock;
+ bool nfcdev_free;
+ u8 current_protocol;
+ u8 current_rf_tech;
+ int fwi;
+};
+
+/*
+ * st95hf_send_recv_cmd() is for sending commands to ST95HF
+ * that are described in the cmd_array[]. It can optionally
+ * receive the response if the cmd request is of type
+ * SYNC. For that to happen caller must pass true to recv_res.
+ * For ASYNC request, recv_res is ignored and the
+ * function will never try to receive the response on behalf
+ * of the caller.
+ */
+static int st95hf_send_recv_cmd(struct st95hf_context *st95context,
+ enum st95hf_cmd_list cmd,
+ int no_modif,
+ struct param_list *list_array,
+ bool recv_res)
+{
+ unsigned char spi_cmd_buffer[MAX_CMD_LEN];
+ int i, ret;
+ struct device *dev = &st95context->spicontext.spidev->dev;
+
+ if (cmd_array[cmd].cmd_len > MAX_CMD_LEN)
+ return -EINVAL;
+ if (cmd_array[cmd].no_cmd_params < no_modif)
+ return -EINVAL;
+ if (no_modif && !list_array)
+ return -EINVAL;
+
+ spi_cmd_buffer[0] = ST95HF_COMMAND_SEND;
+ spi_cmd_buffer[1] = cmd_array[cmd].cmd_id;
+ spi_cmd_buffer[2] = cmd_array[cmd].no_cmd_params;
+
+ memcpy(&spi_cmd_buffer[3], cmd_array[cmd].cmd_params,
+ spi_cmd_buffer[2]);
+
+ for (i = 0; i < no_modif; i++) {
+ if (list_array[i].param_offset >= cmd_array[cmd].no_cmd_params)
+ return -EINVAL;
+ spi_cmd_buffer[3 + list_array[i].param_offset] =
+ list_array[i].new_param_val;
+ }
+
+ ret = st95hf_spi_send(&st95context->spicontext,
+ spi_cmd_buffer,
+ cmd_array[cmd].cmd_len,
+ cmd_array[cmd].req);
+ if (ret) {
+ dev_err(dev, "st95hf_spi_send failed with error %d\n", ret);
+ return ret;
+ }
+
+ if (cmd_array[cmd].req == SYNC && recv_res) {
+ unsigned char st95hf_response_arr[2];
+
+ ret = st95hf_spi_recv_response(&st95context->spicontext,
+ st95hf_response_arr);
+ if (ret < 0) {
+ dev_err(dev, "spi error from st95hf_spi_recv_response(), err = 0x%x\n",
+ ret);
+ return ret;
+ }
+
+ if (st95hf_response_arr[0]) {
+ dev_err(dev, "st95hf error from st95hf_spi_recv_response(), err = 0x%x\n",
+ st95hf_response_arr[0]);
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+static int st95hf_echo_command(struct st95hf_context *st95context)
+{
+ int result = 0;
+ unsigned char echo_response;
+
+ result = st95hf_send_recv_cmd(st95context, CMD_ECHO, 0, NULL, false);
+ if (result)
+ return result;
+
+ /* If control reached here, response can be taken */
+ result = st95hf_spi_recv_echo_res(&st95context->spicontext,
+ &echo_response);
+ if (result) {
+ dev_err(&st95context->spicontext.spidev->dev,
+ "err: echo response receieve error = 0x%x\n", result);
+ return result;
+ }
+
+ if (echo_response == ECHORESPONSE)
+ return 0;
+
+ dev_err(&st95context->spicontext.spidev->dev, "err: echo res is 0x%x\n",
+ echo_response);
+
+ return -EIO;
+}
+
+static int secondary_configuration_type4a(struct st95hf_context *stcontext)
+{
+ int result = 0;
+ struct device *dev = &stcontext->nfcdev->dev;
+
+ /* 14443A config setting after select protocol */
+ result = st95hf_send_recv_cmd(stcontext,
+ CMD_ISO14443A_CONFIG,
+ 0,
+ NULL,
+ true);
+ if (result) {
+ dev_err(dev, "type a config cmd, err = 0x%x\n", result);
+ return result;
+ }
+
+ /* 14443A demo gain setting */
+ result = st95hf_send_recv_cmd(stcontext,
+ CMD_ISO14443A_DEMOGAIN,
+ 0,
+ NULL,
+ true);
+ if (result)
+ dev_err(dev, "type a demogain cmd, err = 0x%x\n", result);
+
+ return result;
+}
+
+static int secondary_configuration_type4b(struct st95hf_context *stcontext)
+{
+ int result = 0;
+ struct device *dev = &stcontext->nfcdev->dev;
+
+ result = st95hf_send_recv_cmd(stcontext,
+ CMD_ISO14443B_DEMOGAIN,
+ 0,
+ NULL,
+ true);
+ if (result)
+ dev_err(dev, "type b demogain cmd, err = 0x%x\n", result);
+
+ return result;
+}
+
+static int st95hf_select_protocol(struct st95hf_context *stcontext, int type)
+{
+ int result = 0;
+ struct device *dev;
+
+ dev = &stcontext->nfcdev->dev;
+
+ switch (type) {
+ case NFC_DIGITAL_RF_TECH_106A:
+ stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_106A;
+ result = st95hf_send_recv_cmd(stcontext,
+ CMD_ISO14443A_PROTOCOL_SELECT,
+ 0,
+ NULL,
+ true);
+ if (result) {
+ dev_err(dev, "protocol sel, err = 0x%x\n",
+ result);
+ return result;
+ }
+
+ /* secondary config. for 14443Type 4A after protocol select */
+ result = secondary_configuration_type4a(stcontext);
+ if (result) {
+ dev_err(dev, "type a secondary config, err = 0x%x\n",
+ result);
+ return result;
+ }
+ break;
+ case NFC_DIGITAL_RF_TECH_106B:
+ stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_106B;
+ result = st95hf_send_recv_cmd(stcontext,
+ CMD_ISO14443B_PROTOCOL_SELECT,
+ 0,
+ NULL,
+ true);
+ if (result) {
+ dev_err(dev, "protocol sel send, err = 0x%x\n",
+ result);
+ return result;
+ }
+
+ /*
+ * delay of 5-6 ms is required after select protocol
+ * command in case of ISO14443 Type B
+ */
+ usleep_range(50000, 60000);
+
+ /* secondary config. for 14443Type 4B after protocol select */
+ result = secondary_configuration_type4b(stcontext);
+ if (result) {
+ dev_err(dev, "type b secondary config, err = 0x%x\n",
+ result);
+ return result;
+ }
+ break;
+ case NFC_DIGITAL_RF_TECH_ISO15693:
+ stcontext->current_rf_tech = NFC_DIGITAL_RF_TECH_ISO15693;
+ result = st95hf_send_recv_cmd(stcontext,
+ CMD_ISO15693_PROTOCOL_SELECT,
+ 0,
+ NULL,
+ true);
+ if (result) {
+ dev_err(dev, "protocol sel send, err = 0x%x\n",
+ result);
+ return result;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void st95hf_send_st95enable_negativepulse(struct st95hf_context *st95con)
+{
+ /* First make irq_in pin high */
+ gpio_set_value(st95con->enable_gpio, HIGH);
+
+ /* wait for 1 milisecond */
+ usleep_range(1000, 2000);
+
+ /* Make irq_in pin low */
+ gpio_set_value(st95con->enable_gpio, LOW);
+
+ /* wait for minimum interrupt pulse to make st95 active */
+ usleep_range(1000, 2000);
+
+ /* At end make it high */
+ gpio_set_value(st95con->enable_gpio, HIGH);
+}
+
+/*
+ * Send a reset sequence over SPI bus (Reset command + wait 3ms +
+ * negative pulse on st95hf enable gpio
+ */
+static int st95hf_send_spi_reset_sequence(struct st95hf_context *st95context)
+{
+ int result = 0;
+ unsigned char reset_cmd = ST95HF_COMMAND_RESET;
+
+ result = st95hf_spi_send(&st95context->spicontext,
+ &reset_cmd,
+ ST95HF_RESET_CMD_LEN,
+ ASYNC);
+ if (result) {
+ dev_err(&st95context->spicontext.spidev->dev,
+ "spi reset sequence cmd error = %d", result);
+ return result;
+ }
+
+ /* wait for 3 milisecond to complete the controller reset process */
+ usleep_range(3000, 4000);
+
+ /* send negative pulse to make st95hf active */
+ st95hf_send_st95enable_negativepulse(st95context);
+
+ /* wait for 10 milisecond : HFO setup time */
+ usleep_range(10000, 20000);
+
+ return result;
+}
+
+static int st95hf_por_sequence(struct st95hf_context *st95context)
+{
+ int nth_attempt = 1;
+ int result;
+
+ st95hf_send_st95enable_negativepulse(st95context);
+
+ usleep_range(5000, 6000);
+ do {
+ /* send an ECHO command and checks ST95HF response */
+ result = st95hf_echo_command(st95context);
+
+ dev_dbg(&st95context->spicontext.spidev->dev,
+ "response from echo function = 0x%x, attempt = %d\n",
+ result, nth_attempt);
+
+ if (!result)
+ return 0;
+
+ /* send an pulse on IRQ in case of the chip is on sleep state */
+ if (nth_attempt == 2)
+ st95hf_send_st95enable_negativepulse(st95context);
+ else
+ st95hf_send_spi_reset_sequence(st95context);
+
+ /* delay of 50 milisecond */
+ usleep_range(50000, 51000);
+ } while (nth_attempt++ < 3);
+
+ return -ETIMEDOUT;
+}
+
+static int iso14443_config_fdt(struct st95hf_context *st95context, int wtxm)
+{
+ int result = 0;
+ struct device *dev = &st95context->spicontext.spidev->dev;
+ struct nfc_digital_dev *nfcddev = st95context->ddev;
+ unsigned char pp_typeb;
+ struct param_list new_params[2];
+
+ pp_typeb = cmd_array[CMD_ISO14443B_PROTOCOL_SELECT].cmd_params[2];
+
+ if (nfcddev->curr_protocol == NFC_PROTO_ISO14443 &&
+ st95context->fwi < 4)
+ st95context->fwi = 4;
+
+ new_params[0].param_offset = 2;
+ if (nfcddev->curr_protocol == NFC_PROTO_ISO14443)
+ new_params[0].new_param_val = st95context->fwi;
+ else if (nfcddev->curr_protocol == NFC_PROTO_ISO14443_B)
+ new_params[0].new_param_val = pp_typeb;
+
+ new_params[1].param_offset = 3;
+ new_params[1].new_param_val = wtxm;
+
+ switch (nfcddev->curr_protocol) {
+ case NFC_PROTO_ISO14443:
+ result = st95hf_send_recv_cmd(st95context,
+ CMD_ISO14443A_PROTOCOL_SELECT,
+ 2,
+ new_params,
+ true);
+ if (result) {
+ dev_err(dev, "WTX type a sel proto, err = 0x%x\n",
+ result);
+ return result;
+ }
+
+ /* secondary config. for 14443Type 4A after protocol select */
+ result = secondary_configuration_type4a(st95context);
+ if (result) {
+ dev_err(dev, "WTX type a second. config, err = 0x%x\n",
+ result);
+ return result;
+ }
+ break;
+ case NFC_PROTO_ISO14443_B:
+ result = st95hf_send_recv_cmd(st95context,
+ CMD_ISO14443B_PROTOCOL_SELECT,
+ 2,
+ new_params,
+ true);
+ if (result) {
+ dev_err(dev, "WTX type b sel proto, err = 0x%x\n",
+ result);
+ return result;
+ }
+
+ /* secondary config. for 14443Type 4B after protocol select */
+ result = secondary_configuration_type4b(st95context);
+ if (result) {
+ dev_err(dev, "WTX type b second. config, err = 0x%x\n",
+ result);
+ return result;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int st95hf_handle_wtx(struct st95hf_context *stcontext,
+ bool new_wtx,
+ int wtx_val)
+{
+ int result = 0;
+ unsigned char val_mm = 0;
+ struct param_list new_params[1];
+ struct nfc_digital_dev *nfcddev = stcontext->ddev;
+ struct device *dev = &stcontext->nfcdev->dev;
+
+ if (new_wtx) {
+ result = iso14443_config_fdt(stcontext, wtx_val & 0x3f);
+ if (result) {
+ dev_err(dev, "Config. setting error on WTX req, err = 0x%x\n",
+ result);
+ return result;
+ }
+
+ /* Send response of wtx with ASYNC as no response expected */
+ new_params[0].param_offset = 1;
+ new_params[0].new_param_val = wtx_val;
+
+ result = st95hf_send_recv_cmd(stcontext,
+ CMD_WTX_RESPONSE,
+ 1,
+ new_params,
+ false);
+ if (result)
+ dev_err(dev, "WTX response send, err = 0x%x\n", result);
+ return result;
+ }
+
+ /* if no new wtx, cofigure with default values */
+ if (nfcddev->curr_protocol == NFC_PROTO_ISO14443)
+ val_mm = cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[3];
+ else if (nfcddev->curr_protocol == NFC_PROTO_ISO14443_B)
+ val_mm = cmd_array[CMD_ISO14443B_PROTOCOL_SELECT].cmd_params[3];
+
+ result = iso14443_config_fdt(stcontext, val_mm);
+ if (result)
+ dev_err(dev, "Default config. setting error after WTX processing, err = 0x%x\n",
+ result);
+
+ return result;
+}
+
+static int st95hf_error_handling(struct st95hf_context *stcontext,
+ struct sk_buff *skb_resp,
+ int res_len)
+{
+ int result = 0;
+ unsigned char error_byte;
+ struct device *dev = &stcontext->nfcdev->dev;
+
+ /* First check ST95HF specific error */
+ if (skb_resp->data[0] & ST95HF_ERR_MASK) {
+ if (skb_resp->data[0] == ST95HF_TIMEOUT_ERROR)
+ result = -ETIMEDOUT;
+ else
+ result = -EIO;
+ return result;
+ }
+
+ /* Check for CRC err only if CRC is present in the tag response */
+ switch (stcontext->current_rf_tech) {
+ case NFC_DIGITAL_RF_TECH_106A:
+ if (stcontext->sendrcv_trflag == TRFLAG_NFCA_STD_FRAME_CRC) {
+ error_byte = skb_resp->data[res_len - 3];
+ if (error_byte & ST95HF_NFCA_CRC_ERR_MASK) {
+ /* CRC error occurred */
+ dev_err(dev, "CRC error, byte received = 0x%x\n",
+ error_byte);
+ result = -EIO;
+ }
+ }
+ break;
+ case NFC_DIGITAL_RF_TECH_106B:
+ case NFC_DIGITAL_RF_TECH_ISO15693:
+ error_byte = skb_resp->data[res_len - 1];
+ if (error_byte & ST95HF_NFCB_CRC_ERR_MASK) {
+ /* CRC error occurred */
+ dev_err(dev, "CRC error, byte received = 0x%x\n",
+ error_byte);
+ result = -EIO;
+ }
+ break;
+ }
+
+ return result;
+}
+
+static int st95hf_response_handler(struct st95hf_context *stcontext,
+ struct sk_buff *skb_resp,
+ int res_len)
+{
+ int result = 0;
+ int skb_len;
+ unsigned char val_mm;
+ struct nfc_digital_dev *nfcddev = stcontext->ddev;
+ struct device *dev = &stcontext->nfcdev->dev;
+ struct st95_digital_cmd_complete_arg *cb_arg;
+
+ cb_arg = &stcontext->complete_cb_arg;
+
+ /* Process the response */
+ skb_put(skb_resp, res_len);
+
+ /* Remove st95 header */
+ skb_pull(skb_resp, 2);
+
+ skb_len = skb_resp->len;
+
+ /* check if it is case of RATS request reply & FWI is present */
+ if (nfcddev->curr_protocol == NFC_PROTO_ISO14443 && cb_arg->rats &&
+ (skb_resp->data[1] & RATS_TB1_PRESENT_MASK)) {
+ if (skb_resp->data[1] & RATS_TA1_PRESENT_MASK)
+ stcontext->fwi =
+ (skb_resp->data[3] & TB1_FWI_MASK) >> 4;
+ else
+ stcontext->fwi =
+ (skb_resp->data[2] & TB1_FWI_MASK) >> 4;
+
+ val_mm = cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[3];
+
+ result = iso14443_config_fdt(stcontext, val_mm);
+ if (result) {
+ dev_err(dev, "error in config_fdt to handle fwi of ATS, error=%d\n",
+ result);
+ return result;
+ }
+ }
+ cb_arg->rats = false;
+
+ /* Remove CRC bytes only if received frames data has an eod (CRC) */
+ switch (stcontext->current_rf_tech) {
+ case NFC_DIGITAL_RF_TECH_106A:
+ if (stcontext->sendrcv_trflag == TRFLAG_NFCA_STD_FRAME_CRC)
+ skb_trim(skb_resp, (skb_len - 5));
+ else
+ skb_trim(skb_resp, (skb_len - 3));
+ break;
+ case NFC_DIGITAL_RF_TECH_106B:
+ case NFC_DIGITAL_RF_TECH_ISO15693:
+ skb_trim(skb_resp, (skb_len - 3));
+ break;
+ }
+
+ return result;
+}
+
+static irqreturn_t st95hf_irq_handler(int irq, void *st95hfcontext)
+{
+ struct st95hf_context *stcontext =
+ (struct st95hf_context *)st95hfcontext;
+
+ if (stcontext->spicontext.req_issync) {
+ complete(&stcontext->spicontext.done);
+ stcontext->spicontext.req_issync = false;
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t st95hf_irq_thread_handler(int irq, void *st95hfcontext)
+{
+ int result = 0;
+ int res_len;
+ static bool wtx;
+ struct device *dev;
+ struct device *spidevice;
+ struct nfc_digital_dev *nfcddev;
+ struct sk_buff *skb_resp;
+ struct st95hf_context *stcontext =
+ (struct st95hf_context *)st95hfcontext;
+ struct st95_digital_cmd_complete_arg *cb_arg;
+
+ spidevice = &stcontext->spicontext.spidev->dev;
+
+ /*
+ * check semaphore, if not down() already, then we don't
+ * know in which context the ISR is called and surely it
+ * will be a bug. Note that down() of the semaphore is done
+ * in the corresponding st95hf_in_send_cmd() and then
+ * only this ISR should be called. ISR will up() the
+ * semaphore before leaving. Hence when the ISR is called
+ * the correct behaviour is down_trylock() should always
+ * return 1 (indicating semaphore cant be taken and hence no
+ * change in semaphore count).
+ * If not, then we up() the semaphore and crash on
+ * a BUG() !
+ */
+ if (!down_trylock(&stcontext->exchange_lock)) {
+ up(&stcontext->exchange_lock);
+ WARN(1, "unknown context in ST95HF ISR");
+ return IRQ_NONE;
+ }
+
+ cb_arg = &stcontext->complete_cb_arg;
+ skb_resp = cb_arg->skb_resp;
+
+ mutex_lock(&stcontext->rm_lock);
+ res_len = st95hf_spi_recv_response(&stcontext->spicontext,
+ skb_resp->data);
+ if (res_len < 0) {
+ dev_err(spidevice, "TISR spi response err = 0x%x\n", res_len);
+ result = res_len;
+ goto end;
+ }
+
+ /* if stcontext->nfcdev_free is true, it means remove already ran */
+ if (stcontext->nfcdev_free) {
+ result = -ENODEV;
+ goto end;
+ }
+
+ dev = &stcontext->nfcdev->dev;
+ nfcddev = stcontext->ddev;
+ if (skb_resp->data[2] == WTX_REQ_FROM_TAG) {
+ /* Request for new FWT from tag */
+ result = st95hf_handle_wtx(stcontext, true, skb_resp->data[3]);
+ if (result)
+ goto end;
+
+ wtx = true;
+ mutex_unlock(&stcontext->rm_lock);
+ return IRQ_HANDLED;
+ }
+
+ result = st95hf_error_handling(stcontext, skb_resp, res_len);
+ if (result)
+ goto end;
+
+ result = st95hf_response_handler(stcontext, skb_resp, res_len);
+ if (result)
+ goto end;
+
+ /*
+ * If select protocol is done on wtx req. do select protocol
+ * again with default values
+ */
+ if (wtx) {
+ wtx = false;
+ result = st95hf_handle_wtx(stcontext, false, 0);
+ if (result)
+ goto end;
+ }
+
+ /* call digital layer callback */
+ cb_arg->complete_cb(stcontext->ddev, cb_arg->cb_usrarg, skb_resp);
+
+ /* up the semaphore before returning */
+ up(&stcontext->exchange_lock);
+ mutex_unlock(&stcontext->rm_lock);
+
+ return IRQ_HANDLED;
+
+end:
+ kfree_skb(skb_resp);
+ wtx = false;
+ cb_arg->rats = false;
+ skb_resp = ERR_PTR(result);
+ /* call of callback with error */
+ cb_arg->complete_cb(stcontext->ddev, cb_arg->cb_usrarg, skb_resp);
+ /* up the semaphore before returning */
+ up(&stcontext->exchange_lock);
+ mutex_unlock(&stcontext->rm_lock);
+ return IRQ_HANDLED;
+}
+
+/* NFC ops functions definition */
+static int st95hf_in_configure_hw(struct nfc_digital_dev *ddev,
+ int type,
+ int param)
+{
+ struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev);
+
+ if (type == NFC_DIGITAL_CONFIG_RF_TECH)
+ return st95hf_select_protocol(stcontext, param);
+
+ if (type == NFC_DIGITAL_CONFIG_FRAMING) {
+ switch (param) {
+ case NFC_DIGITAL_FRAMING_NFCA_SHORT:
+ stcontext->sendrcv_trflag = TRFLAG_NFCA_SHORT_FRAME;
+ break;
+ case NFC_DIGITAL_FRAMING_NFCA_STANDARD:
+ stcontext->sendrcv_trflag = TRFLAG_NFCA_STD_FRAME;
+ break;
+ case NFC_DIGITAL_FRAMING_NFCA_T4T:
+ case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP:
+ case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A:
+ stcontext->sendrcv_trflag = TRFLAG_NFCA_STD_FRAME_CRC;
+ break;
+ case NFC_DIGITAL_FRAMING_NFCB:
+ case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY:
+ case NFC_DIGITAL_FRAMING_ISO15693_T5T:
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int rf_off(struct st95hf_context *stcontext)
+{
+ int rc;
+ struct device *dev;
+
+ dev = &stcontext->nfcdev->dev;
+
+ rc = st95hf_send_recv_cmd(stcontext, CMD_FIELD_OFF, 0, NULL, true);
+ if (rc)
+ dev_err(dev, "protocol sel send field off, err = 0x%x\n", rc);
+
+ return rc;
+}
+
+static int st95hf_in_send_cmd(struct nfc_digital_dev *ddev,
+ struct sk_buff *skb,
+ u16 timeout,
+ nfc_digital_cmd_complete_t cb,
+ void *arg)
+{
+ struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev);
+ int rc;
+ struct sk_buff *skb_resp;
+ int len_data_to_tag = 0;
+
+ skb_resp = nfc_alloc_recv_skb(MAX_RESPONSE_BUFFER_SIZE, GFP_KERNEL);
+ if (!skb_resp) {
+ rc = -ENOMEM;
+ goto error;
+ }
+
+ switch (stcontext->current_rf_tech) {
+ case NFC_DIGITAL_RF_TECH_106A:
+ len_data_to_tag = skb->len + 1;
+ *skb_put(skb, 1) = stcontext->sendrcv_trflag;
+ break;
+ case NFC_DIGITAL_RF_TECH_106B:
+ case NFC_DIGITAL_RF_TECH_ISO15693:
+ len_data_to_tag = skb->len;
+ break;
+ default:
+ rc = -EINVAL;
+ goto free_skb_resp;
+ }
+
+ skb_push(skb, 3);
+ skb->data[0] = ST95HF_COMMAND_SEND;
+ skb->data[1] = SEND_RECEIVE_CMD;
+ skb->data[2] = len_data_to_tag;
+
+ stcontext->complete_cb_arg.skb_resp = skb_resp;
+ stcontext->complete_cb_arg.cb_usrarg = arg;
+ stcontext->complete_cb_arg.complete_cb = cb;
+
+ if ((skb->data[3] == ISO14443A_RATS_REQ) &&
+ ddev->curr_protocol == NFC_PROTO_ISO14443)
+ stcontext->complete_cb_arg.rats = true;
+
+ /*
+ * down the semaphore to indicate to remove func that an
+ * ISR is pending, note that it will not block here in any case.
+ * If found blocked, it is a BUG!
+ */
+ rc = down_killable(&stcontext->exchange_lock);
+ if (rc) {
+ WARN(1, "Semaphore is not found up in st95hf_in_send_cmd\n");
+ return rc;
+ }
+
+ rc = st95hf_spi_send(&stcontext->spicontext, skb->data,
+ skb->len,
+ ASYNC);
+ if (rc) {
+ dev_err(&stcontext->nfcdev->dev,
+ "Error %d trying to perform data_exchange", rc);
+ /* up the semaphore since ISR will never come in this case */
+ up(&stcontext->exchange_lock);
+ goto free_skb_resp;
+ }
+
+ kfree_skb(skb);
+
+ return rc;
+
+free_skb_resp:
+ kfree_skb(skb_resp);
+error:
+ return rc;
+}
+
+/* p2p will be supported in a later release ! */
+static int st95hf_tg_configure_hw(struct nfc_digital_dev *ddev,
+ int type,
+ int param)
+{
+ return 0;
+}
+
+static int st95hf_tg_send_cmd(struct nfc_digital_dev *ddev,
+ struct sk_buff *skb,
+ u16 timeout,
+ nfc_digital_cmd_complete_t cb,
+ void *arg)
+{
+ return 0;
+}
+
+static int st95hf_tg_listen(struct nfc_digital_dev *ddev,
+ u16 timeout,
+ nfc_digital_cmd_complete_t cb,
+ void *arg)
+{
+ return 0;
+}
+
+static int st95hf_tg_get_rf_tech(struct nfc_digital_dev *ddev, u8 *rf_tech)
+{
+ return 0;
+}
+
+static int st95hf_switch_rf(struct nfc_digital_dev *ddev, bool on)
+{
+ u8 rf_tech;
+ struct st95hf_context *stcontext = nfc_digital_get_drvdata(ddev);
+
+ rf_tech = ddev->curr_rf_tech;
+
+ if (on)
+ /* switch on RF field */
+ return st95hf_select_protocol(stcontext, rf_tech);
+
+ /* switch OFF RF field */
+ return rf_off(stcontext);
+}
+
+/* TODO st95hf_abort_cmd */
+static void st95hf_abort_cmd(struct nfc_digital_dev *ddev)
+{
+}
+
+static struct nfc_digital_ops st95hf_nfc_digital_ops = {
+ .in_configure_hw = st95hf_in_configure_hw,
+ .in_send_cmd = st95hf_in_send_cmd,
+
+ .tg_listen = st95hf_tg_listen,
+ .tg_configure_hw = st95hf_tg_configure_hw,
+ .tg_send_cmd = st95hf_tg_send_cmd,
+ .tg_get_rf_tech = st95hf_tg_get_rf_tech,
+
+ .switch_rf = st95hf_switch_rf,
+ .abort_cmd = st95hf_abort_cmd,
+};
+
+static const struct spi_device_id st95hf_id[] = {
+ { "st95hf", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, st95hf_id);
+
+static int st95hf_probe(struct spi_device *nfc_spi_dev)
+{
+ int ret;
+
+ struct st95hf_context *st95context;
+ struct st95hf_spi_context *spicontext;
+
+ nfc_info(&nfc_spi_dev->dev, "ST95HF driver probe called.\n");
+
+ st95context = devm_kzalloc(&nfc_spi_dev->dev,
+ sizeof(struct st95hf_context),
+ GFP_KERNEL);
+ if (!st95context)
+ return -ENOMEM;
+
+ spicontext = &st95context->spicontext;
+
+ spicontext->spidev = nfc_spi_dev;
+
+ st95context->fwi =
+ cmd_array[CMD_ISO14443A_PROTOCOL_SELECT].cmd_params[2];
+
+ if (device_property_present(&nfc_spi_dev->dev, "st95hfvin")) {
+ st95context->st95hf_supply =
+ devm_regulator_get(&nfc_spi_dev->dev,
+ "st95hfvin");
+ if (IS_ERR(st95context->st95hf_supply)) {
+ dev_err(&nfc_spi_dev->dev, "failed to acquire regulator\n");
+ return PTR_ERR(st95context->st95hf_supply);
+ }
+
+ ret = regulator_enable(st95context->st95hf_supply);
+ if (ret) {
+ dev_err(&nfc_spi_dev->dev, "failed to enable regulator\n");
+ return ret;
+ }
+ }
+
+ init_completion(&spicontext->done);
+ mutex_init(&spicontext->spi_lock);
+
+ /*
+ * Store spicontext in spi device object for using it in
+ * remove function
+ */
+ dev_set_drvdata(&nfc_spi_dev->dev, spicontext);
+
+ st95context->enable_gpio =
+ of_get_named_gpio(nfc_spi_dev->dev.of_node,
+ "enable-gpio",
+ 0);
+ if (!gpio_is_valid(st95context->enable_gpio)) {
+ dev_err(&nfc_spi_dev->dev, "No valid enable gpio\n");
+ ret = st95context->enable_gpio;
+ goto err_disable_regulator;
+ }
+
+ ret = devm_gpio_request_one(&nfc_spi_dev->dev, st95context->enable_gpio,
+ GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+ "enable_gpio");
+ if (ret)
+ goto err_disable_regulator;
+
+ if (nfc_spi_dev->irq > 0) {
+ if (devm_request_threaded_irq(&nfc_spi_dev->dev,
+ nfc_spi_dev->irq,
+ st95hf_irq_handler,
+ st95hf_irq_thread_handler,
+ IRQF_TRIGGER_FALLING,
+ "st95hf",
+ (void *)st95context) < 0) {
+ dev_err(&nfc_spi_dev->dev, "err: irq request for st95hf is failed\n");
+ ret = -EINVAL;
+ goto err_disable_regulator;
+ }
+ } else {
+ dev_err(&nfc_spi_dev->dev, "not a valid IRQ associated with ST95HF\n");
+ ret = -EINVAL;
+ goto err_disable_regulator;
+ }
+
+ /*
+ * First reset SPI to handle warm reset of the system.
+ * It will put the ST95HF device in Power ON state
+ * which make the state of device identical to state
+ * at the time of cold reset of the system.
+ */
+ ret = st95hf_send_spi_reset_sequence(st95context);
+ if (ret) {
+ dev_err(&nfc_spi_dev->dev, "err: spi_reset_sequence failed\n");
+ goto err_disable_regulator;
+ }
+
+ /* call PowerOnReset sequence of ST95hf to activate it */
+ ret = st95hf_por_sequence(st95context);
+ if (ret) {
+ dev_err(&nfc_spi_dev->dev, "err: por seq failed for st95hf\n");
+ goto err_disable_regulator;
+ }
+
+ /* create NFC dev object and register with NFC Subsystem */
+ st95context->ddev = nfc_digital_allocate_device(&st95hf_nfc_digital_ops,
+ ST95HF_SUPPORTED_PROT,
+ ST95HF_CAPABILITIES,
+ ST95HF_HEADROOM_LEN,
+ ST95HF_TAILROOM_LEN);
+ if (!st95context->ddev) {
+ ret = -ENOMEM;
+ goto err_disable_regulator;
+ }
+
+ st95context->nfcdev = st95context->ddev->nfc_dev;
+ nfc_digital_set_parent_dev(st95context->ddev, &nfc_spi_dev->dev);
+
+ ret = nfc_digital_register_device(st95context->ddev);
+ if (ret) {
+ dev_err(&st95context->nfcdev->dev, "st95hf registration failed\n");
+ goto err_free_digital_device;
+ }
+
+ /* store st95context in nfc device object */
+ nfc_digital_set_drvdata(st95context->ddev, st95context);
+
+ sema_init(&st95context->exchange_lock, 1);
+ mutex_init(&st95context->rm_lock);
+
+ return ret;
+
+err_free_digital_device:
+ nfc_digital_free_device(st95context->ddev);
+err_disable_regulator:
+ if (st95context->st95hf_supply)
+ regulator_disable(st95context->st95hf_supply);
+
+ return ret;
+}
+
+static int st95hf_remove(struct spi_device *nfc_spi_dev)
+{
+ int result = 0;
+ unsigned char reset_cmd = ST95HF_COMMAND_RESET;
+ struct st95hf_spi_context *spictx = dev_get_drvdata(&nfc_spi_dev->dev);
+
+ struct st95hf_context *stcontext = container_of(spictx,
+ struct st95hf_context,
+ spicontext);
+
+ mutex_lock(&stcontext->rm_lock);
+
+ nfc_digital_unregister_device(stcontext->ddev);
+ nfc_digital_free_device(stcontext->ddev);
+ stcontext->nfcdev_free = true;
+
+ mutex_unlock(&stcontext->rm_lock);
+
+ /* if last in_send_cmd's ISR is pending, wait for it to finish */
+ result = down_killable(&stcontext->exchange_lock);
+ if (result == -EINTR)
+ dev_err(&spictx->spidev->dev, "sleep for semaphore interrupted by signal\n");
+
+ /* next reset the ST95HF controller */
+ result = st95hf_spi_send(&stcontext->spicontext,
+ &reset_cmd,
+ ST95HF_RESET_CMD_LEN,
+ ASYNC);
+ if (result) {
+ dev_err(&spictx->spidev->dev,
+ "ST95HF reset failed in remove() err = %d\n", result);
+ return result;
+ }
+
+ /* wait for 3 ms to complete the controller reset process */
+ usleep_range(3000, 4000);
+
+ /* disable regulator */
+ if (stcontext->st95hf_supply)
+ regulator_disable(stcontext->st95hf_supply);
+
+ return result;
+}
+
+/* Register as SPI protocol driver */
+static struct spi_driver st95hf_driver = {
+ .driver = {
+ .name = "st95hf",
+ .owner = THIS_MODULE,
+ },
+ .id_table = st95hf_id,
+ .probe = st95hf_probe,
+ .remove = st95hf_remove,
+};
+
+module_spi_driver(st95hf_driver);
+
+MODULE_AUTHOR("Shikha Singh <shikha.singh@st.com>");
+MODULE_DESCRIPTION("ST NFC Transceiver ST95HF driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nfc/st95hf/spi.c b/drivers/nfc/st95hf/spi.c
new file mode 100644
index 000000000000..e2d3bbcc8c34
--- /dev/null
+++ b/drivers/nfc/st95hf/spi.c
@@ -0,0 +1,167 @@
+/*
+ * ----------------------------------------------------------------------------
+ * drivers/nfc/st95hf/spi.c function definitions for SPI communication
+ * ----------------------------------------------------------------------------
+ * Copyright (C) 2015 STMicroelectronics Pvt. Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "spi.h"
+
+/* Function to send user provided buffer to ST95HF through SPI */
+int st95hf_spi_send(struct st95hf_spi_context *spicontext,
+ unsigned char *buffertx,
+ int datalen,
+ enum req_type reqtype)
+{
+ struct spi_message m;
+ int result = 0;
+ struct spi_device *spidev = spicontext->spidev;
+ struct spi_transfer tx_transfer = {
+ .tx_buf = buffertx,
+ .len = datalen,
+ };
+
+ mutex_lock(&spicontext->spi_lock);
+
+ if (reqtype == SYNC) {
+ spicontext->req_issync = true;
+ reinit_completion(&spicontext->done);
+ } else {
+ spicontext->req_issync = false;
+ }
+
+ spi_message_init(&m);
+ spi_message_add_tail(&tx_transfer, &m);
+
+ result = spi_sync(spidev, &m);
+ if (result) {
+ dev_err(&spidev->dev, "error: sending cmd to st95hf using SPI = %d\n",
+ result);
+ mutex_unlock(&spicontext->spi_lock);
+ return result;
+ }
+
+ /* return for asynchronous or no-wait case */
+ if (reqtype == ASYNC) {
+ mutex_unlock(&spicontext->spi_lock);
+ return 0;
+ }
+
+ result = wait_for_completion_timeout(&spicontext->done,
+ msecs_to_jiffies(1000));
+ /* check for timeout or success */
+ if (!result) {
+ dev_err(&spidev->dev, "error: response not ready timeout\n");
+ result = -ETIMEDOUT;
+ } else {
+ result = 0;
+ }
+
+ mutex_unlock(&spicontext->spi_lock);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(st95hf_spi_send);
+
+/* Function to Receive command Response */
+int st95hf_spi_recv_response(struct st95hf_spi_context *spicontext,
+ unsigned char *receivebuff)
+{
+ int len = 0;
+ struct spi_transfer tx_takedata;
+ struct spi_message m;
+ struct spi_device *spidev = spicontext->spidev;
+ unsigned char readdata_cmd = ST95HF_COMMAND_RECEIVE;
+ struct spi_transfer t[2] = {
+ {.tx_buf = &readdata_cmd, .len = 1,},
+ {.rx_buf = receivebuff, .len = 2, .cs_change = 1,},
+ };
+
+ int ret = 0;
+
+ memset(&tx_takedata, 0x0, sizeof(struct spi_transfer));
+
+ mutex_lock(&spicontext->spi_lock);
+
+ /* First spi transfer to know the length of valid data */
+ spi_message_init(&m);
+ spi_message_add_tail(&t[0], &m);
+ spi_message_add_tail(&t[1], &m);
+
+ ret = spi_sync(spidev, &m);
+ if (ret) {
+ dev_err(&spidev->dev, "spi_recv_resp, data length error = %d\n",
+ ret);
+ mutex_unlock(&spicontext->spi_lock);
+ return ret;
+ }
+
+ /* As 2 bytes are already read */
+ len = 2;
+
+ /* Support of long frame */
+ if (receivebuff[0] & 0x60)
+ len += (((receivebuff[0] & 0x60) >> 5) << 8) | receivebuff[1];
+ else
+ len += receivebuff[1];
+
+ /* Now make a transfer to read only relevant bytes */
+ tx_takedata.rx_buf = &receivebuff[2];
+ tx_takedata.len = len - 2;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&tx_takedata, &m);
+
+ ret = spi_sync(spidev, &m);
+
+ mutex_unlock(&spicontext->spi_lock);
+ if (ret) {
+ dev_err(&spidev->dev, "spi_recv_resp, data read error = %d\n",
+ ret);
+ return ret;
+ }
+
+ return len;
+}
+EXPORT_SYMBOL_GPL(st95hf_spi_recv_response);
+
+int st95hf_spi_recv_echo_res(struct st95hf_spi_context *spicontext,
+ unsigned char *receivebuff)
+{
+ unsigned char readdata_cmd = ST95HF_COMMAND_RECEIVE;
+ struct spi_transfer t[2] = {
+ {.tx_buf = &readdata_cmd, .len = 1,},
+ {.rx_buf = receivebuff, .len = 1,},
+ };
+ struct spi_message m;
+ struct spi_device *spidev = spicontext->spidev;
+ int ret = 0;
+
+ mutex_lock(&spicontext->spi_lock);
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t[0], &m);
+ spi_message_add_tail(&t[1], &m);
+ ret = spi_sync(spidev, &m);
+
+ mutex_unlock(&spicontext->spi_lock);
+
+ if (ret)
+ dev_err(&spidev->dev, "recv_echo_res, data read error = %d\n",
+ ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(st95hf_spi_recv_echo_res);
diff --git a/drivers/nfc/st95hf/spi.h b/drivers/nfc/st95hf/spi.h
new file mode 100644
index 000000000000..552d220747cd
--- /dev/null
+++ b/drivers/nfc/st95hf/spi.h
@@ -0,0 +1,64 @@
+/*
+ * ---------------------------------------------------------------------------
+ * drivers/nfc/st95hf/spi.h functions declarations for SPI communication
+ * ---------------------------------------------------------------------------
+ * Copyright (C) 2015 STMicroelectronics – All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_ST95HF_SPI_H
+#define __LINUX_ST95HF_SPI_H
+
+#include <linux/spi/spi.h>
+
+/* Basic ST95HF SPI CMDs */
+#define ST95HF_COMMAND_SEND 0x0
+#define ST95HF_COMMAND_RESET 0x1
+#define ST95HF_COMMAND_RECEIVE 0x2
+
+#define ST95HF_RESET_CMD_LEN 0x1
+
+/*
+ * structure to contain st95hf spi communication specific information.
+ * @req_issync: true for synchronous calls.
+ * @spidev: st95hf spi device object.
+ * @done: completion structure to wait for st95hf response
+ * for synchronous calls.
+ * @spi_lock: mutex to allow only one spi transfer at a time.
+ */
+struct st95hf_spi_context {
+ bool req_issync;
+ struct spi_device *spidev;
+ struct completion done;
+ struct mutex spi_lock;
+};
+
+/* flag to differentiate synchronous & asynchronous spi request */
+enum req_type {
+ SYNC,
+ ASYNC,
+};
+
+int st95hf_spi_send(struct st95hf_spi_context *spicontext,
+ unsigned char *buffertx,
+ int datalen,
+ enum req_type reqtype);
+
+int st95hf_spi_recv_response(struct st95hf_spi_context *spicontext,
+ unsigned char *receivebuff);
+
+int st95hf_spi_recv_echo_res(struct st95hf_spi_context *spicontext,
+ unsigned char *receivebuff);
+
+#endif
diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index f857feb2b573..10842b7051b3 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -2139,7 +2139,7 @@ static int trf7970a_remove(struct spi_device *spi)
#ifdef CONFIG_PM_SLEEP
static int trf7970a_suspend(struct device *dev)
{
- struct spi_device *spi = container_of(dev, struct spi_device, dev);
+ struct spi_device *spi = to_spi_device(dev);
struct trf7970a *trf = spi_get_drvdata(spi);
dev_dbg(dev, "Suspend\n");
@@ -2155,7 +2155,7 @@ static int trf7970a_suspend(struct device *dev)
static int trf7970a_resume(struct device *dev)
{
- struct spi_device *spi = container_of(dev, struct spi_device, dev);
+ struct spi_device *spi = to_spi_device(dev);
struct trf7970a *trf = spi_get_drvdata(spi);
int ret;
@@ -2174,7 +2174,7 @@ static int trf7970a_resume(struct device *dev)
#ifdef CONFIG_PM
static int trf7970a_pm_runtime_suspend(struct device *dev)
{
- struct spi_device *spi = container_of(dev, struct spi_device, dev);
+ struct spi_device *spi = to_spi_device(dev);
struct trf7970a *trf = spi_get_drvdata(spi);
int ret;
@@ -2191,7 +2191,7 @@ static int trf7970a_pm_runtime_suspend(struct device *dev)
static int trf7970a_pm_runtime_resume(struct device *dev)
{
- struct spi_device *spi = container_of(dev, struct spi_device, dev);
+ struct spi_device *spi = to_spi_device(dev);
struct trf7970a *trf = spi_get_drvdata(spi);
int ret;
diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h
index cfda59b226ee..ca13992089b8 100644
--- a/include/linux/platform_data/microread.h
+++ b/include/linux/platform_data/microread.h
@@ -1,5 +1,5 @@
/*
- * Driver include for the PN544 NFC chip.
+ * Driver include for the Inside Secure microread NFC Chip.
*
* Copyright (C) 2011 Tieto Poland
* Copyright (C) 2012 Intel Corporation. All rights reserved.
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index dcfcfc9c00bf..1a3de8b34ad2 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -299,6 +299,7 @@ void nfc_driver_failure(struct nfc_dev *dev, int err);
int nfc_se_transaction(struct nfc_dev *dev, u8 se_idx,
struct nfc_evt_transaction *evt_transaction);
+int nfc_se_connectivity(struct nfc_dev *dev, u8 se_idx);
int nfc_add_se(struct nfc_dev *dev, u32 se_idx, u16 type);
int nfc_remove_se(struct nfc_dev *dev, u32 se_idx);
struct nfc_se *nfc_find_se(struct nfc_dev *dev, u32 se_idx);
diff --git a/net/nfc/core.c b/net/nfc/core.c
index 1fe3d3b362c0..122bb81da918 100644
--- a/net/nfc/core.c
+++ b/net/nfc/core.c
@@ -953,6 +953,19 @@ out:
}
EXPORT_SYMBOL(nfc_se_transaction);
+int nfc_se_connectivity(struct nfc_dev *dev, u8 se_idx)
+{
+ int rc;
+
+ pr_debug("connectivity: %x\n", se_idx);
+
+ device_lock(&dev->dev);
+ rc = nfc_genl_se_connectivity(dev, se_idx);
+ device_unlock(&dev->dev);
+ return rc;
+}
+EXPORT_SYMBOL(nfc_se_connectivity);
+
static void nfc_release(struct device *d)
{
struct nfc_dev *dev = to_nfc_dev(d);
diff --git a/net/nfc/digital_core.c b/net/nfc/digital_core.c
index 23c2a118ac9f..dd9003f38822 100644
--- a/net/nfc/digital_core.c
+++ b/net/nfc/digital_core.c
@@ -20,7 +20,8 @@
#include "digital.h"
#define DIGITAL_PROTO_NFCA_RF_TECH \
- (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK | NFC_PROTO_NFC_DEP_MASK)
+ (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK | \
+ NFC_PROTO_NFC_DEP_MASK | NFC_PROTO_ISO14443_MASK)
#define DIGITAL_PROTO_NFCB_RF_TECH NFC_PROTO_ISO14443_B_MASK
diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index 10c99a578421..fbb7a2b57b44 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -610,14 +610,14 @@ int nci_core_conn_create(struct nci_dev *ndev, u8 destination_type,
struct nci_core_conn_create_cmd *cmd;
struct core_conn_create_data data;
+ if (!number_destination_params)
+ return -EINVAL;
+
data.length = params_len + sizeof(struct nci_core_conn_create_cmd);
cmd = kzalloc(data.length, GFP_KERNEL);
if (!cmd)
return -ENOMEM;
- if (!number_destination_params)
- return -EINVAL;
-
cmd->destination_type = destination_type;
cmd->number_destination_params = number_destination_params;
memcpy(cmd->params, params, params_len);
diff --git a/net/nfc/nci/hci.c b/net/nfc/nci/hci.c
index 2aedac15cb59..a0ab26d535dc 100644
--- a/net/nfc/nci/hci.c
+++ b/net/nfc/nci/hci.c
@@ -676,7 +676,7 @@ int nci_hci_connect_gate(struct nci_dev *ndev,
break;
default:
pipe = nci_hci_create_pipe(ndev, dest_host, dest_gate, &r);
- if (pipe < 0)
+ if (pipe == NCI_HCI_INVALID_PIPE)
return r;
pipe_created = true;
break;
diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c
index f58c1fba1026..ea023b35f1c2 100644
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -552,6 +552,43 @@ free_msg:
return -EMSGSIZE;
}
+int nfc_genl_se_connectivity(struct nfc_dev *dev, u8 se_idx)
+{
+ struct nfc_se *se;
+ struct sk_buff *msg;
+ void *hdr;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ hdr = genlmsg_put(msg, 0, 0, &nfc_genl_family, 0,
+ NFC_EVENT_SE_CONNECTIVITY);
+ if (!hdr)
+ goto free_msg;
+
+ se = nfc_find_se(dev, se_idx);
+ if (!se)
+ goto free_msg;
+
+ if (nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx) ||
+ nla_put_u32(msg, NFC_ATTR_SE_INDEX, se_idx) ||
+ nla_put_u8(msg, NFC_ATTR_SE_TYPE, se->type))
+ goto nla_put_failure;
+
+ genlmsg_end(msg, hdr);
+
+ genlmsg_multicast(&nfc_genl_family, msg, 0, 0, GFP_KERNEL);
+
+ return 0;
+
+nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+free_msg:
+ nlmsg_free(msg);
+ return -EMSGSIZE;
+}
+
static int nfc_genl_send_device(struct sk_buff *msg, struct nfc_dev *dev,
u32 portid, u32 seq,
struct netlink_callback *cb,
diff --git a/net/nfc/nfc.h b/net/nfc/nfc.h
index c20b784ad720..6c6f76b370b1 100644
--- a/net/nfc/nfc.h
+++ b/net/nfc/nfc.h
@@ -105,6 +105,7 @@ int nfc_genl_se_added(struct nfc_dev *dev, u32 se_idx, u16 type);
int nfc_genl_se_removed(struct nfc_dev *dev, u32 se_idx);
int nfc_genl_se_transaction(struct nfc_dev *dev, u8 se_idx,
struct nfc_evt_transaction *evt_transaction);
+int nfc_genl_se_connectivity(struct nfc_dev *dev, u8 se_idx);
struct nfc_dev *nfc_get_device(unsigned int idx);