diff options
| -rw-r--r-- | drivers/net/phy/broadcom.c | 19 | ||||
| -rw-r--r-- | include/linux/brcmphy.h | 21 |
2 files changed, 24 insertions, 16 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 4142f69c1530..3ce266ab521b 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -381,10 +381,21 @@ static int bcm5481_config_aneg(struct phy_device *phydev) return ret; } +struct bcm54616s_phy_priv { + bool mode_1000bx_en; +}; + static int bcm54616s_probe(struct phy_device *phydev) { + struct bcm54616s_phy_priv *priv; int val, intf_sel; + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE); if (val < 0) return val; @@ -407,7 +418,7 @@ static int bcm54616s_probe(struct phy_device *phydev) * 1000BASE-X configuration. */ if (!(val & BCM54616S_100FX_MODE)) - phydev->dev_flags |= PHY_BCM_FLAGS_MODE_1000BX; + priv->mode_1000bx_en = true; phydev->port = PORT_FIBRE; } @@ -417,10 +428,11 @@ static int bcm54616s_probe(struct phy_device *phydev) static int bcm54616s_config_aneg(struct phy_device *phydev) { + struct bcm54616s_phy_priv *priv = phydev->priv; int ret; /* Aneg firstly. */ - if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) + if (priv->mode_1000bx_en) ret = genphy_c37_config_aneg(phydev); else ret = genphy_config_aneg(phydev); @@ -433,9 +445,10 @@ static int bcm54616s_config_aneg(struct phy_device *phydev) static int bcm54616s_read_status(struct phy_device *phydev) { + struct bcm54616s_phy_priv *priv = phydev->priv; int err; - if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) + if (priv->mode_1000bx_en) err = genphy_c37_read_status(phydev); else err = genphy_read_status(phydev); diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index de9430d55c90..844dcfe789a2 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -61,19 +61,14 @@ #define PHY_BCM_OUI_5 0x03625e00 #define PHY_BCM_OUI_6 0xae025000 -#define PHY_BCM_FLAGS_MODE_COPPER 0x00000001 -#define PHY_BCM_FLAGS_MODE_1000BX 0x00000002 -#define PHY_BCM_FLAGS_INTF_SGMII 0x00000010 -#define PHY_BCM_FLAGS_INTF_XAUI 0x00000020 -#define PHY_BRCM_WIRESPEED_ENABLE 0x00000100 -#define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000200 -#define PHY_BRCM_RX_REFCLK_UNUSED 0x00000400 -#define PHY_BRCM_STD_IBND_DISABLE 0x00000800 -#define PHY_BRCM_EXT_IBND_RX_ENABLE 0x00001000 -#define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000 -#define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 -#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 -#define PHY_BRCM_EN_MASTER_MODE 0x00010000 +#define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000001 +#define PHY_BRCM_RX_REFCLK_UNUSED 0x00000002 +#define PHY_BRCM_STD_IBND_DISABLE 0x00000004 +#define PHY_BRCM_EXT_IBND_RX_ENABLE 0x00000008 +#define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00000010 +#define PHY_BRCM_CLEAR_RGMII_MODE 0x00000020 +#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00000040 +#define PHY_BRCM_EN_MASTER_MODE 0x00000080 /* Broadcom BCM7xxx specific workarounds */ #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) |