diff options
| -rw-r--r-- | Documentation/hwmon/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/hwmon/max15301.rst | 87 | ||||
| -rw-r--r-- | MAINTAINERS | 7 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/max15301.c | 189 |
6 files changed, 294 insertions, 0 deletions
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index d6a050f85477..6bc696fa0ed5 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -115,6 +115,7 @@ Hardware Monitoring Kernel Drivers ltc4260 ltc4261 max127 + max15301 max16064 max16065 max1619 diff --git a/Documentation/hwmon/max15301.rst b/Documentation/hwmon/max15301.rst new file mode 100644 index 000000000000..e3dc22fe1c6d --- /dev/null +++ b/Documentation/hwmon/max15301.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver max15301 +====================== + +Supported chips: + + * Maxim MAX15301 + + Prefix: 'max15301', 'bmr461' + + Addresses scanned: - + + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX15301.pdf + +Author: Erik Rosen <erik.rosen@metormote.com> + + +Description +----------- + +This driver supports hardware monitoring for Maxim MAX15301 controller chip and +compatible modules. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details +on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Module parameters +----------------- + +delay +----- + +The controller requires a minimum interval between I2C bus accesses. +The default interval is set to 100 us. For manual override, the driver +provides a writeable module parameter, 'delay', which can be used to +set the interval to a value between 0 and 65,535 microseconds. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +======================= ======================================================== +in1_label "vin" +in1_input Measured input voltage. +in1_lcrit Critical minimum input voltage. +in1_crit Critical maximum input voltage. +in1_lcrit_alarm Input voltage critical low alarm. +in1_crit_alarm Input voltage critical high alarm. + +in2_label "vout1" +in2_input Measured output voltage. +in2_lcrit Critical minimum output Voltage. +in2_crit Critical maximum output voltage. +in2_lcrit_alarm Critical output voltage critical low alarm. +in2_crit_alarm Critical output voltage critical high alarm. + +curr1_label "iout1" +curr1_input Measured output current. +curr1_crit Critical maximum output current. +curr1_crit_alarm Output current critical high alarm. + +temp1_input Measured maximum temperature of all phases. +temp1_max Maximum temperature limit. +temp1_max_alarm High temperature alarm. +temp1_crit Critical maximum temperature limit. +temp1_crit_alarm Critical maximum temperature alarm. +======================= ======================================================== diff --git a/MAINTAINERS b/MAINTAINERS index bb5bbaa5fba2..8f4010d6031c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10791,6 +10791,13 @@ S: Orphan F: drivers/video/fbdev/matrox/matroxfb_* F: include/uapi/linux/matroxfb.h +MAX15301 DRIVER +M: Daniel Nilsson <daniel.nilsson@flex.com> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/max15301.rst +F: drivers/hwmon/pmbus/max15301.c + MAX16065 HARDWARE MONITOR DRIVER M: Guenter Roeck <linux@roeck-us.net> L: linux-hwmon@vger.kernel.org diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index e9727176b167..37a5c39784fa 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -176,6 +176,15 @@ config SENSORS_LTC3815 This driver can also be built as a module. If so, the module will be called ltc3815. +config SENSORS_MAX15301 + tristate "Maxim MAX15301" + help + If you say yes here you get hardware monitoring support for Maxim + MAX15301, as well as for Flex BMR461. + + This driver can also be built as a module. If so, the module will + be called max15301. + config SENSORS_MAX16064 tristate "Maxim MAX16064" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 4ca98e9005f1..f8dcc27cd56a 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o +obj-$(CONFIG_SENSORS_MAX15301) += max15301.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o obj-$(CONFIG_SENSORS_MAX16601) += max16601.o obj-$(CONFIG_SENSORS_MAX20730) += max20730.o diff --git a/drivers/hwmon/pmbus/max15301.c b/drivers/hwmon/pmbus/max15301.c new file mode 100644 index 000000000000..727455e5740b --- /dev/null +++ b/drivers/hwmon/pmbus/max15301.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for Maxim MAX15301 + * + * Copyright (c) 2021 Flextronics International Sweden AB + * + * Even though the specification does not specifically mention it, + * extensive empirical testing has revealed that auto-detection of + * limit-registers will fail in a random fashion unless the delay + * parameter is set to above about 80us. The default delay is set + * to 100us to include some safety margin. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/ktime.h> +#include <linux/delay.h> +#include <linux/pmbus.h> +#include "pmbus.h" + +static const struct i2c_device_id max15301_id[] = { + {"bmr461", 0}, + {"max15301", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, max15301_id); + +struct max15301_data { + int id; + ktime_t access; /* Chip access time */ + int delay; /* Delay between chip accesses in us */ + struct pmbus_driver_info info; +}; + +#define to_max15301_data(x) container_of(x, struct max15301_data, info) + +#define MAX15301_WAIT_TIME 100 /* us */ + +static ushort delay = MAX15301_WAIT_TIME; +module_param(delay, ushort, 0644); +MODULE_PARM_DESC(delay, "Delay between chip accesses in us"); + +static struct max15301_data max15301_data = { + .info = { + .pages = 1, + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, + } +}; + +/* This chip needs a delay between accesses */ +static inline void max15301_wait(const struct max15301_data *data) +{ + if (data->delay) { + s64 delta = ktime_us_delta(ktime_get(), data->access); + + if (delta < data->delay) + udelay(data->delay - delta); + } +} + +static int max15301_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct max15301_data *data = to_max15301_data(info); + int ret; + + if (page > 0) + return -ENXIO; + + if (reg >= PMBUS_VIRT_BASE) + return -ENXIO; + + max15301_wait(data); + ret = pmbus_read_word_data(client, page, phase, reg); + data->access = ktime_get(); + + return ret; +} + +static int max15301_read_byte_data(struct i2c_client *client, int page, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct max15301_data *data = to_max15301_data(info); + int ret; + + if (page > 0) + return -ENXIO; + + max15301_wait(data); + ret = pmbus_read_byte_data(client, page, reg); + data->access = ktime_get(); + + return ret; +} + +static int max15301_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct max15301_data *data = to_max15301_data(info); + int ret; + + if (page > 0) + return -ENXIO; + + if (reg >= PMBUS_VIRT_BASE) + return -ENXIO; + + max15301_wait(data); + ret = pmbus_write_word_data(client, page, reg, word); + data->access = ktime_get(); + + return ret; +} + +static int max15301_write_byte(struct i2c_client *client, int page, u8 value) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct max15301_data *data = to_max15301_data(info); + int ret; + + if (page > 0) + return -ENXIO; + + max15301_wait(data); + ret = pmbus_write_byte(client, page, value); + data->access = ktime_get(); + + return ret; +} + +static int max15301_probe(struct i2c_client *client) +{ + int status; + u8 device_id[I2C_SMBUS_BLOCK_MAX + 1]; + const struct i2c_device_id *mid; + struct pmbus_driver_info *info = &max15301_data.info; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA + | I2C_FUNC_SMBUS_BLOCK_DATA)) + return -ENODEV; + + status = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, device_id); + if (status < 0) { + dev_err(&client->dev, "Failed to read Device Id\n"); + return status; + } + for (mid = max15301_id; mid->name[0]; mid++) { + if (!strncasecmp(mid->name, device_id, strlen(mid->name))) + break; + } + if (!mid->name[0]) { + dev_err(&client->dev, "Unsupported device\n"); + return -ENODEV; + } + + max15301_data.delay = delay; + + info->read_byte_data = max15301_read_byte_data; + info->read_word_data = max15301_read_word_data; + info->write_byte = max15301_write_byte; + info->write_word_data = max15301_write_word_data; + + return pmbus_do_probe(client, info); +} + +static struct i2c_driver max15301_driver = { + .driver = { + .name = "max15301", + }, + .probe_new = max15301_probe, + .id_table = max15301_id, +}; + +module_i2c_driver(max15301_driver); + +MODULE_AUTHOR("Erik Rosen <erik.rosen@metormote.com>"); +MODULE_DESCRIPTION("PMBus driver for Maxim MAX15301"); +MODULE_LICENSE("GPL"); |