summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/mips/boot/dts/ingenic/cu1000-neo.dts114
-rw-r--r--arch/mips/boot/dts/ingenic/x1000.dtsi126
2 files changed, 118 insertions, 122 deletions
diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
index 03abd94acd84..22a1066d637b 100644
--- a/arch/mips/boot/dts/ingenic/cu1000-neo.dts
+++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
@@ -7,8 +7,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
/ {
- compatible = "yna,cu1000-neo", "ingenic,x1000";
- model = "YSH & ATIL General Board CU Neo";
+ compatible = "yna,cu1000-neo", "ingenic,x1000e";
+ model = "YSH & ATIL General Board CU1000-Neo";
aliases {
serial2 = &uart2;
@@ -23,20 +23,19 @@
reg = <0x0 0x04000000>;
};
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&gpb 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
wlan_pwrseq: msc1-pwrseq {
compatible = "mmc-pwrseq-simple";
- clocks = <&lpoclk>;
- clock-names = "ext_clock";
-
reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <200>;
-
- lpoclk: ap6212a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
};
};
@@ -53,6 +52,13 @@
ingenic,pwm-channels-mask = <0xfa>;
};
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+};
+
&i2c0 {
status = "okay";
@@ -61,43 +67,15 @@
pinctrl-names = "default";
pinctrl-0 = <&pins_i2c0>;
- ads7830@48 {
+ ads7830: adc@48 {
compatible = "ti,ads7830";
reg = <0x48>;
};
};
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pins_uart2>;
-
- status = "okay";
-};
-
-&mac {
- phy-mode = "rmii";
- phy-handle = <&lan8720a>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pins_mac>;
-
- snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
-
- status = "okay";
-};
-
-&mdio {
+&msc0 {
status = "okay";
- lan8720a: ethernet-phy@0 {
- compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-};
-
-&msc0 {
bus-width = <8>;
max-frequency = <50000000>;
@@ -105,26 +83,23 @@
pinctrl-0 = <&pins_msc0>;
non-removable;
-
- status = "okay";
};
&msc1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
bus-width = <4>;
max-frequency = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&pins_msc1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
non-removable;
mmc-pwrseq = <&wlan_pwrseq>;
- status = "okay";
-
ap6212a: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
@@ -137,23 +112,40 @@
};
};
-&pinctrl {
- pins_i2c0: i2c0 {
- function = "i2c0";
- groups = "i2c0-data";
- bias-disable;
+&mac {
+ status = "okay";
+
+ phy-mode = "rmii";
+ phy-handle = <&lan8720a>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mac>;
+
+ snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+ status = "okay";
+
+ lan8720a: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
};
+};
+&pinctrl {
pins_uart2: uart2 {
function = "uart2";
groups = "uart2-data-d";
- bias-disable;
+ bias-pull-up;
};
- pins_mac: mac {
- function = "mac";
- groups = "mac";
- bias-disable;
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-pull-up;
};
pins_msc0: msc0 {
@@ -167,4 +159,10 @@
groups = "mmc1-1bit", "mmc1-4bit";
bias-disable;
};
+
+ pins_mac: mac {
+ function = "mac";
+ groups = "mac";
+ bias-disable;
+ };
};
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 59a63a0985a8..9de9e7c2d523 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -48,9 +48,7 @@
};
tcu: timer@10002000 {
- compatible = "ingenic,x1000-tcu",
- "ingenic,jz4770-tcu",
- "simple-mfd";
+ compatible = "ingenic,x1000-tcu", "simple-mfd";
reg = <0x10002000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -156,48 +154,6 @@
};
};
- i2c0: i2c-controller@10050000 {
- compatible = "ingenic,x1000-i2c";
- reg = <0x10050000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&intc>;
- interrupts = <60>;
-
- clocks = <&cgu X1000_CLK_I2C0>;
-
- status = "disabled";
- };
-
- i2c1: i2c-controller@10051000 {
- compatible = "ingenic,x1000-i2c";
- reg = <0x10051000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&intc>;
- interrupts = <59>;
-
- clocks = <&cgu X1000_CLK_I2C1>;
-
- status = "disabled";
- };
-
- i2c2: i2c-controller@10052000 {
- compatible = "ingenic,x1000-i2c";
- reg = <0x10052000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&intc>;
- interrupts = <58>;
-
- clocks = <&cgu X1000_CLK_I2C2>;
-
- status = "disabled";
- };
-
uart0: serial@10030000 {
compatible = "ingenic,x1000-uart";
reg = <0x10030000 0x100>;
@@ -237,37 +193,57 @@
status = "disabled";
};
- pdma: dma-controller@13420000 {
- compatible = "ingenic,x1000-dma";
- reg = <0x13420000 0x400>, <0x13421000 0x40>;
- #dma-cells = <2>;
+ i2c0: i2c-controller@10050000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10050000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupt-parent = <&intc>;
- interrupts = <10>;
+ interrupts = <60>;
- clocks = <&cgu X1000_CLK_PDMA>;
+ clocks = <&cgu X1000_CLK_I2C0>;
+
+ status = "disabled";
};
- mac: ethernet@134b0000 {
- compatible = "ingenic,x1000-mac", "snps,dwmac";
- reg = <0x134b0000 0x2000>;
+ i2c1: i2c-controller@10051000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10051000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupt-parent = <&intc>;
- interrupts = <55>;
- interrupt-names = "macirq";
+ interrupts = <59>;
- clocks = <&cgu X1000_CLK_MAC>;
- clock-names = "stmmaceth";
+ clocks = <&cgu X1000_CLK_I2C1>;
status = "disabled";
+ };
- mdio: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
+ i2c2: i2c-controller@10052000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10052000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- status = "disabled";
- };
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+
+ clocks = <&cgu X1000_CLK_I2C2>;
+
+ status = "disabled";
+ };
+
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1000-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu X1000_CLK_PDMA>;
};
msc0: mmc@13450000 {
@@ -311,4 +287,26 @@
status = "disabled";
};
+
+ mac: ethernet@134b0000 {
+ compatible = "ingenic,x1000-mac", "snps,dwmac";
+ reg = <0x134b0000 0x2000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <55>;
+ interrupt-names = "macirq";
+
+ clocks = <&cgu X1000_CLK_MAC>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
};
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-13 22:30:37 +0300