summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/corsair-cpro.rst42
-rw-r--r--Documentation/hwmon/index.rst1
-rw-r--r--MAINTAINERS6
-rw-r--r--drivers/hwmon/Kconfig10
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/corsair-cpro.c558
6 files changed, 618 insertions, 0 deletions
diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst
new file mode 100644
index 000000000000..78820156f07d
--- /dev/null
+++ b/Documentation/hwmon/corsair-cpro.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver corsair-cpro
+==========================
+
+Supported devices:
+
+ * Corsair Commander Pro
+ * Corsair Commander Pro (1000D)
+
+Author: Marius Zachmann
+
+Description
+-----------
+
+This driver implements the sysfs interface for the Corsair Commander Pro.
+The Corsair Commander Pro is a USB device with 6 fan connectors,
+4 temperature sensor connectors and 2 Corsair LED connectors.
+It can read the voltage levels on the SATA power connector.
+
+Usage Notes
+-----------
+
+Since it is a USB device, hotswapping is possible. The device is autodetected.
+
+Sysfs entries
+-------------
+
+======================= =====================================================================
+in0_input Voltage on SATA 12v
+in1_input Voltage on SATA 5v
+in2_input Voltage on SATA 3.3v
+temp[1-4]_input Temperature on connected temperature sensors
+fan[1-6]_input Connected fan rpm.
+fan[1-6]_label Shows fan type as detected by the device.
+fan[1-6]_target Sets fan speed target rpm.
+ When reading, it reports the last value if it was set by the driver.
+ Otherwise returns 0.
+pwm[1-6] Sets the fan speed. Values from 0-255.
+ When reading, it reports the last value if it was set by the driver.
+ Otherwise returns 0.
+======================= =====================================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 55ff4b7c5349..750d3a975d82 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -47,6 +47,7 @@ Hardware Monitoring Kernel Drivers
bel-pfe
bt1-pvt
coretemp
+ corsair-cpro
da9052
da9055
dell-smm-hwmon
diff --git a/MAINTAINERS b/MAINTAINERS
index d53db30d1365..06607125b793 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4401,6 +4401,12 @@ S: Maintained
F: Documentation/hwmon/coretemp.rst
F: drivers/hwmon/coretemp.c
+CORSAIR-CPRO HARDWARE MONITOR DRIVER
+M: Marius <mail@mariuszachmann.de>
+L: linux-hwmon@vger.kernel.org
+S: Maintained
+F: drivers/hwmon/corsair-cpro.c
+
COSA/SRP SYNC SERIAL DRIVER
M: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
S: Maintained
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 288ae9f63588..7b11d622b82d 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -439,6 +439,16 @@ config SENSORS_BT1_PVT_ALARMS
the data conversion will be periodically performed and the data will be
saved in the internal driver cache.
+config SENSORS_CORSAIR_CPRO
+ tristate "Corsair Commander Pro controller"
+ depends on HID
+ help
+ If you say yes here you get support for the Corsair Commander Pro
+ controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called corsair-cpro.
+
config SENSORS_DRIVETEMP
tristate "Hard disk drives with temperature sensors"
depends on SCSI && ATA
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3e32c21f5efe..18e1ef74ade7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o
obj-$(CONFIG_SENSORS_BT1_PVT) += bt1-pvt.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
+obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o
obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o
diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
new file mode 100644
index 000000000000..e8504267d0e8
--- /dev/null
+++ b/drivers/hwmon/corsair-cpro.c
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * corsair-cpro.c - Linux driver for Corsair Commander Pro
+ * Copyright (C) 2020 Marius Zachmann <mail@mariuszachmann.de>
+ *
+ * This driver uses hid reports to communicate with the device to allow hidraw userspace drivers
+ * still being used. The device does not use report ids. When using hidraw and this driver
+ * simultaniously, reports could be switched.
+ */
+
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/hid.h>
+#include <linux/hwmon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define USB_VENDOR_ID_CORSAIR 0x1b1c
+#define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10
+#define USB_PRODUCT_ID_CORSAIR_1000D 0x1d00
+
+#define OUT_BUFFER_SIZE 63
+#define IN_BUFFER_SIZE 16
+#define LABEL_LENGTH 11
+#define REQ_TIMEOUT 300
+
+#define CTL_GET_TMP_CNCT 0x10 /*
+ * returns in bytes 1-4 for each temp sensor:
+ * 0 not connected
+ * 1 connected
+ */
+#define CTL_GET_TMP 0x11 /*
+ * send: byte 1 is channel, rest zero
+ * rcv: returns temp for channel in centi-degree celsius
+ * in bytes 1 and 2
+ * returns 17 in byte 0 if no sensor is connected
+ */
+#define CTL_GET_VOLT 0x12 /*
+ * send: byte 1 is rail number: 0 = 12v, 1 = 5v, 2 = 3.3v
+ * rcv: returns millivolt in bytes 1,2
+ */
+#define CTL_GET_FAN_CNCT 0x20 /*
+ * returns in bytes 1-6 for each fan:
+ * 0 not connected
+ * 1 3pin
+ * 2 4pin
+ */
+#define CTL_GET_FAN_RPM 0x21 /*
+ * send: byte 1 is channel, rest zero
+ * rcv: returns rpm in bytes 1,2
+ */
+#define CTL_SET_FAN_FPWM 0x23 /*
+ * set fixed pwm
+ * send: byte 1 is fan number
+ * send: byte 2 is percentage from 0 - 100
+ */
+#define CTL_SET_FAN_TARGET 0x24 /*
+ * set target rpm
+ * send: byte 1 is fan number
+ * send: byte 2-3 is target
+ * device accepts all values from 0x00 - 0xFFFF
+ */
+
+#define NUM_FANS 6
+#define NUM_TEMP_SENSORS 4
+
+struct ccp_device {
+ struct hid_device *hdev;
+ struct device *hwmon_dev;
+ struct completion wait_input_report;
+ struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */
+ u8 *buffer;
+ int pwm[6];
+ int target[6];
+ DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS);
+ DECLARE_BITMAP(fan_cnct, NUM_FANS);
+ char fan_label[6][LABEL_LENGTH];
+};
+
+/* send command, check for error in response, response in ccp->buffer */
+static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2, u8 byte3)
+{
+ unsigned long t;
+ int ret;
+
+ memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE);
+ ccp->buffer[0] = command;
+ ccp->buffer[1] = byte1;
+ ccp->buffer[2] = byte2;
+ ccp->buffer[3] = byte3;
+
+ reinit_completion(&ccp->wait_input_report);
+
+ ret = hid_hw_output_report(ccp->hdev, ccp->buffer, OUT_BUFFER_SIZE);
+ if (ret < 0)
+ return ret;
+
+ t = wait_for_completion_timeout(&ccp->wait_input_report, msecs_to_jiffies(REQ_TIMEOUT));
+ if (!t)
+ return -ETIMEDOUT;
+
+ /* first byte of response is error code */
+ if (ccp->buffer[0] != 0x00) {
+ hid_dbg(ccp->hdev, "device response error: %d", ccp->buffer[0]);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
+{
+ struct ccp_device *ccp = hid_get_drvdata(hdev);
+
+ /* only copy buffer when requested */
+ if (completion_done(&ccp->wait_input_report))
+ return 0;
+
+ memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size));
+ complete(&ccp->wait_input_report);
+
+ return 0;
+}
+
+/* requests and returns single data values depending on channel */
+static int get_data(struct ccp_device *ccp, int command, int channel)
+{
+ int ret;
+
+ mutex_lock(&ccp->mutex);
+
+ ret = send_usb_cmd(ccp, command, channel, 0, 0);
+ if (ret)
+ goto out_unlock;
+
+ ret = (ccp->buffer[1] << 8) + ccp->buffer[2];
+
+out_unlock:
+ mutex_unlock(&ccp->mutex);
+ return ret;
+}
+
+static int set_pwm(struct ccp_device *ccp, int channel, long val)
+{
+ int ret;
+
+ if (val < 0 || val > 255)
+ return -EINVAL;
+
+ ccp->pwm[channel] = val;
+
+ /* The Corsair Commander Pro uses values from 0-100 */
+ val = DIV_ROUND_CLOSEST(val * 100, 255);
+
+ mutex_lock(&ccp->mutex);
+
+ ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val, 0);
+
+ mutex_unlock(&ccp->mutex);
+ return ret;
+}
+
+static int set_target(struct ccp_device *ccp, int channel, long val)
+{
+ int ret;
+
+ val = clamp_val(val, 0, 0xFFFF);
+ ccp->target[channel] = val;
+
+ mutex_lock(&ccp->mutex);
+
+ ret = send_usb_cmd(ccp, CTL_SET_FAN_TARGET, channel, val >> 8, val);
+
+ mutex_unlock(&ccp->mutex);
+ return ret;
+}
+
+static int ccp_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ struct ccp_device *ccp = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_fan:
+ switch (attr) {
+ case hwmon_fan_label:
+ *str = ccp->fan_label[channel];
+ return 0;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ccp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct ccp_device *ccp = dev_get_drvdata(dev);
+ int ret;
+
+ switch (type) {
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_input:
+ ret = get_data(ccp, CTL_GET_TMP, channel);
+ if (ret < 0)
+ return ret;
+ *val = ret * 10;
+ return 0;
+ default:
+ break;
+ }
+ break;
+ case hwmon_fan:
+ switch (attr) {
+ case hwmon_fan_input:
+ ret = get_data(ccp, CTL_GET_FAN_RPM, channel);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return 0;
+ case hwmon_fan_target:
+ /* how to read target values from the device is unknown */
+ /* driver returns last set value or 0 */
+ *val = ccp->target[channel];
+ return 0;
+ default:
+ break;
+ }
+ break;
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ /* how to read pwm values from the device is currently unknown */
+ /* driver returns last set value or 0 */
+ *val = ccp->pwm[channel];
+ return 0;
+ default:
+ break;
+ }
+ break;
+ case hwmon_in:
+ switch (attr) {
+ case hwmon_in_input:
+ ret = get_data(ccp, CTL_GET_VOLT, channel);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return 0;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+};
+
+static int ccp_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct ccp_device *ccp = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ return set_pwm(ccp, channel, val);
+ default:
+ break;
+ }
+ break;
+ case hwmon_fan:
+ switch (attr) {
+ case hwmon_fan_target:
+ return set_target(ccp, channel, val);
+ default:
+ break;
+ }
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+};
+
+static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct ccp_device *ccp = data;
+
+ switch (type) {
+ case hwmon_temp:
+ if (!test_bit(channel, ccp->temp_cnct))
+ break;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ return 0444;
+ case hwmon_temp_label:
+ return 0444;
+ default:
+ break;
+ }
+ break;
+ case hwmon_fan:
+ if (!test_bit(channel, ccp->fan_cnct))
+ break;
+
+ switch (attr) {
+ case hwmon_fan_input:
+ return 0444;
+ case hwmon_fan_label:
+ return 0444;
+ case hwmon_fan_target:
+ return 0644;
+ default:
+ break;
+ }
+ break;
+ case hwmon_pwm:
+ if (!test_bit(channel, ccp->fan_cnct))
+ break;
+
+ switch (attr) {
+ case hwmon_pwm_input:
+ return 0644;
+ default:
+ break;
+ }
+ break;
+ case hwmon_in:
+ switch (attr) {
+ case hwmon_in_input:
+ return 0444;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+};
+
+static const struct hwmon_ops ccp_hwmon_ops = {
+ .is_visible = ccp_is_visible,
+ .read = ccp_read,
+ .read_string = ccp_read_string,
+ .write = ccp_write,
+};
+
+static const struct hwmon_channel_info *ccp_info[] = {
+ HWMON_CHANNEL_INFO(chip,
+ HWMON_C_REGISTER_TZ),
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT
+ ),
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET,
+ HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_TARGET
+ ),
+ HWMON_CHANNEL_INFO(pwm,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT
+ ),
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_INPUT,
+ HWMON_I_INPUT,
+ HWMON_I_INPUT
+ ),
+ NULL
+};
+
+static const struct hwmon_chip_info ccp_chip_info = {
+ .ops = &ccp_hwmon_ops,
+ .info = ccp_info,
+};
+
+/* read fan connection status and set labels */
+static int get_fan_cnct(struct ccp_device *ccp)
+{
+ int channel;
+ int mode;
+ int ret;
+
+ ret = send_usb_cmd(ccp, CTL_GET_FAN_CNCT, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ for (channel = 0; channel < NUM_FANS; channel++) {
+ mode = ccp->buffer[channel + 1];
+ if (mode == 0)
+ continue;
+
+ set_bit(channel, ccp->fan_cnct);
+
+ switch (mode) {
+ case 1:
+ scnprintf(ccp->fan_label[channel], LABEL_LENGTH,
+ "fan%d 3pin", channel + 1);
+ break;
+ case 2:
+ scnprintf(ccp->fan_label[channel], LABEL_LENGTH,
+ "fan%d 4pin", channel + 1);
+ break;
+ default:
+ scnprintf(ccp->fan_label[channel], LABEL_LENGTH,
+ "fan%d other", channel + 1);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/* read temp sensor connection status */
+static int get_temp_cnct(struct ccp_device *ccp)
+{
+ int channel;
+ int mode;
+ int ret;
+
+ ret = send_usb_cmd(ccp, CTL_GET_TMP_CNCT, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ for (channel = 0; channel < NUM_TEMP_SENSORS; channel++) {
+ mode = ccp->buffer[channel + 1];
+ if (mode == 0)
+ continue;
+
+ set_bit(channel, ccp->temp_cnct);
+ }
+
+ return 0;
+}
+
+static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct ccp_device *ccp;
+ int ret;
+
+ ccp = devm_kzalloc(&hdev->dev, sizeof(*ccp), GFP_KERNEL);
+ if (!ccp)
+ return -ENOMEM;
+
+ ccp->buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL);
+ if (!ccp->buffer)
+ return -ENOMEM;
+
+ ret = hid_parse(hdev);
+ if (ret)
+ return ret;
+
+ ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ if (ret)
+ return ret;
+
+ ret = hid_hw_open(hdev);
+ if (ret)
+ goto out_hw_stop;
+
+ ccp->hdev = hdev;
+ hid_set_drvdata(hdev, ccp);
+ mutex_init(&ccp->mutex);
+ init_completion(&ccp->wait_input_report);
+
+ hid_device_io_start(hdev);
+
+ /* temp and fan connection status only updates when device is powered on */
+ ret = get_temp_cnct(ccp);
+ if (ret)
+ goto out_hw_close;
+
+ ret = get_fan_cnct(ccp);
+ if (ret)
+ goto out_hw_close;
+ ccp->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsaircpro",
+ ccp, &ccp_chip_info, 0);
+ if (IS_ERR(ccp->hwmon_dev)) {
+ ret = PTR_ERR(ccp->hwmon_dev);
+ goto out_hw_close;
+ }
+
+ return 0;
+
+out_hw_close:
+ hid_hw_close(hdev);
+out_hw_stop:
+ hid_hw_stop(hdev);
+ return ret;
+}
+
+static void ccp_remove(struct hid_device *hdev)
+{
+ struct ccp_device *ccp = hid_get_drvdata(hdev);
+
+ hwmon_device_unregister(ccp->hwmon_dev);
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id ccp_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) },
+ { }
+};
+
+static struct hid_driver ccp_driver = {
+ .name = "corsair-cpro",
+ .id_table = ccp_devices,
+ .probe = ccp_probe,
+ .remove = ccp_remove,
+ .raw_event = ccp_raw_event,
+};
+
+MODULE_DEVICE_TABLE(hid, ccp_devices);
+MODULE_LICENSE("GPL");
+
+static int __init ccp_init(void)
+{
+ return hid_register_driver(&ccp_driver);
+}
+
+static void __exit ccp_exit(void)
+{
+ hid_unregister_driver(&ccp_driver);
+}
+
+/*
+ * When compiling this driver as built-in, hwmon initcalls will get called before the
+ * hid driver and this driver would fail to register. late_initcall solves this.
+ */
+late_initcall(ccp_init);
+module_exit(ccp_exit);