diff options
-rw-r--r-- | drivers/regulator/pca9450-regulator.c | 194 | ||||
-rw-r--r-- | include/linux/regulator/pca9450.h | 1 |
2 files changed, 193 insertions, 2 deletions
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c index 2ab365d2749f..242ff25f5b83 100644 --- a/drivers/regulator/pca9450-regulator.c +++ b/drivers/regulator/pca9450-regulator.c @@ -107,6 +107,14 @@ static const struct linear_range pca9450_dvs_buck_volts[] = { }; /* + * BUCK1/3 + * 0.65 to 2.2375V (12.5mV step) + */ +static const struct linear_range pca9451a_dvs_buck_volts[] = { + REGULATOR_LINEAR_RANGE(650000, 0x00, 0x7F, 12500), +}; + +/* * BUCK4/5/6 * 0.6V to 3.4V (25mV step) */ @@ -662,6 +670,178 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = { }, }; +static const struct pca9450_regulator_desc pca9451a_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK1, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, + .linear_ranges = pca9451a_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9451a_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, + .vsel_mask = BUCK1OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK1CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .ramp_mask = BUCK1_RAMP_MASK, + .ramp_delay_table = pca9450_dvs_buck_ramp_table, + .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table), + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, + .run_mask = BUCK1OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, + .standby_mask = BUCK1OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK2, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, + .vsel_mask = BUCK2OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK2CTRL, + .enable_mask = BUCK2_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ_STBYREQ, + .ramp_mask = BUCK2_RAMP_MASK, + .ramp_delay_table = pca9450_dvs_buck_ramp_table, + .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table), + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, + .run_mask = BUCK2OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, + .standby_mask = BUCK2OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK4, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK4OUT, + .vsel_mask = BUCK4OUT_MASK, + .enable_reg = PCA9450_REG_BUCK4CTRL, + .enable_mask = BUCK4_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK5, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK5OUT, + .vsel_mask = BUCK5OUT_MASK, + .enable_reg = PCA9450_REG_BUCK5CTRL, + .enable_mask = BUCK5_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK6, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK6OUT, + .vsel_mask = BUCK6OUT_MASK, + .enable_reg = PCA9450_REG_BUCK6CTRL, + .enable_mask = BUCK6_ENMODE_MASK, + .enable_val = BUCK_ENMODE_ONREQ, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO1, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), + .vsel_reg = PCA9450_REG_LDO1CTRL, + .vsel_mask = LDO1OUT_MASK, + .enable_reg = PCA9450_REG_LDO1CTRL, + .enable_mask = LDO1_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO4, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO4CTRL, + .vsel_mask = LDO4OUT_MASK, + .enable_reg = PCA9450_REG_LDO4CTRL, + .enable_mask = LDO4_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO5, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), + .vsel_reg = PCA9450_REG_LDO5CTRL_H, + .vsel_mask = LDO5HOUT_MASK, + .enable_reg = PCA9450_REG_LDO5CTRL_H, + .enable_mask = LDO5H_EN_MASK, + .owner = THIS_MODULE, + }, + }, +}; + static irqreturn_t pca9450_irq_handler(int irq, void *data) { struct pca9450 *pca9450 = data; @@ -729,6 +909,10 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) regulator_desc = pca9450bc_regulators; pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators); break; + case PCA9450_TYPE_PCA9451A: + regulator_desc = pca9451a_regulators; + pca9450->rcnt = ARRAY_SIZE(pca9451a_regulators); + break; default: dev_err(&i2c->dev, "Unknown device type"); return -EINVAL; @@ -755,7 +939,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) /* Check your board and dts for match the right pmic */ if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) || - ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) { + ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC) || + ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9451A)) { dev_err(&i2c->dev, "Device id(%x) mismatched\n", device_id >> 4); return -EINVAL; @@ -846,7 +1031,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c) } dev_info(&i2c->dev, "%s probed.\n", - type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc"); + type == PCA9450_TYPE_PCA9450A ? "pca9450a" : + (type == PCA9450_TYPE_PCA9451A ? "pca9451a" : "pca9450bc")); return 0; } @@ -864,6 +1050,10 @@ static const struct of_device_id pca9450_of_match[] = { .compatible = "nxp,pca9450c", .data = (void *)PCA9450_TYPE_PCA9450BC, }, + { + .compatible = "nxp,pca9451a", + .data = (void *)PCA9450_TYPE_PCA9451A, + }, { } }; MODULE_DEVICE_TABLE(of, pca9450_of_match); diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h index 505c908dbb81..243633c8dceb 100644 --- a/include/linux/regulator/pca9450.h +++ b/include/linux/regulator/pca9450.h @@ -9,6 +9,7 @@ enum pca9450_chip_type { PCA9450_TYPE_PCA9450A = 0, PCA9450_TYPE_PCA9450BC, + PCA9450_TYPE_PCA9451A, PCA9450_TYPE_AMOUNT, }; |