diff options
| -rw-r--r-- | drivers/cpuidle/Kconfig.arm | 1 | ||||
| -rw-r--r-- | drivers/cpuidle/cpuidle-qcom-spm.c | 318 | ||||
| -rw-r--r-- | drivers/soc/qcom/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/soc/qcom/Makefile | 1 | ||||
| -rw-r--r-- | drivers/soc/qcom/spm.c | 216 | ||||
| -rw-r--r-- | include/soc/qcom/spm.h | 41 |
6 files changed, 336 insertions, 250 deletions
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm index 334f83e56120..8a02213c8391 100644 --- a/drivers/cpuidle/Kconfig.arm +++ b/drivers/cpuidle/Kconfig.arm @@ -112,6 +112,7 @@ config ARM_QCOM_SPM_CPUIDLE select CPU_IDLE_MULTIPLE_DRIVERS select DT_IDLE_STATES select QCOM_SCM + select QCOM_SPM help Select this to enable cpuidle for Qualcomm processors. The Subsystem Power Manager (SPM) controls low power modes for the diff --git a/drivers/cpuidle/cpuidle-qcom-spm.c b/drivers/cpuidle/cpuidle-qcom-spm.c index c0e7971da2da..01e77913a414 100644 --- a/drivers/cpuidle/cpuidle-qcom-spm.c +++ b/drivers/cpuidle/cpuidle-qcom-spm.c @@ -18,158 +18,18 @@ #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/qcom_scm.h> +#include <soc/qcom/spm.h> #include <asm/proc-fns.h> #include <asm/suspend.h> #include "dt_idle_states.h" -#define MAX_PMIC_DATA 2 -#define MAX_SEQ_DATA 64 -#define SPM_CTL_INDEX 0x7f -#define SPM_CTL_INDEX_SHIFT 4 -#define SPM_CTL_EN BIT(0) - -enum pm_sleep_mode { - PM_SLEEP_MODE_STBY, - PM_SLEEP_MODE_RET, - PM_SLEEP_MODE_SPC, - PM_SLEEP_MODE_PC, - PM_SLEEP_MODE_NR, -}; - -enum spm_reg { - SPM_REG_CFG, - SPM_REG_SPM_CTL, - SPM_REG_DLY, - SPM_REG_PMIC_DLY, - SPM_REG_PMIC_DATA_0, - SPM_REG_PMIC_DATA_1, - SPM_REG_VCTL, - SPM_REG_SEQ_ENTRY, - SPM_REG_SPM_STS, - SPM_REG_PMIC_STS, - SPM_REG_NR, -}; - -struct spm_reg_data { - const u8 *reg_offset; - u32 spm_cfg; - u32 spm_dly; - u32 pmic_dly; - u32 pmic_data[MAX_PMIC_DATA]; - u8 seq[MAX_SEQ_DATA]; - u8 start_index[PM_SLEEP_MODE_NR]; -}; - -struct spm_driver_data { +struct cpuidle_qcom_spm_data { struct cpuidle_driver cpuidle_driver; - void __iomem *reg_base; - const struct spm_reg_data *reg_data; -}; - -static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = { - [SPM_REG_CFG] = 0x08, - [SPM_REG_SPM_CTL] = 0x30, - [SPM_REG_DLY] = 0x34, - [SPM_REG_SEQ_ENTRY] = 0x80, -}; - -/* SPM register data for 8974, 8084 */ -static const struct spm_reg_data spm_reg_8974_8084_cpu = { - .reg_offset = spm_reg_offset_v2_1, - .spm_cfg = 0x1, - .spm_dly = 0x3C102800, - .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03, - 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30, - 0x0F }, - .start_index[PM_SLEEP_MODE_STBY] = 0, - .start_index[PM_SLEEP_MODE_SPC] = 3, + struct spm_driver_data *spm; }; -/* SPM register data for 8226 */ -static const struct spm_reg_data spm_reg_8226_cpu = { - .reg_offset = spm_reg_offset_v2_1, - .spm_cfg = 0x0, - .spm_dly = 0x3C102800, - .seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90, - 0x5B, 0x60, 0x03, 0x60, 0x3B, 0x76, 0x76, 0x0B, 0x94, 0x5B, - 0x80, 0x10, 0x26, 0x30, 0x0F }, - .start_index[PM_SLEEP_MODE_STBY] = 0, - .start_index[PM_SLEEP_MODE_SPC] = 5, -}; - -static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = { - [SPM_REG_CFG] = 0x08, - [SPM_REG_SPM_CTL] = 0x20, - [SPM_REG_PMIC_DLY] = 0x24, - [SPM_REG_PMIC_DATA_0] = 0x28, - [SPM_REG_PMIC_DATA_1] = 0x2C, - [SPM_REG_SEQ_ENTRY] = 0x80, -}; - -/* SPM register data for 8064 */ -static const struct spm_reg_data spm_reg_8064_cpu = { - .reg_offset = spm_reg_offset_v1_1, - .spm_cfg = 0x1F, - .pmic_dly = 0x02020004, - .pmic_data[0] = 0x0084009C, - .pmic_data[1] = 0x00A4001C, - .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01, - 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F }, - .start_index[PM_SLEEP_MODE_STBY] = 0, - .start_index[PM_SLEEP_MODE_SPC] = 2, -}; - -static inline void spm_register_write(struct spm_driver_data *drv, - enum spm_reg reg, u32 val) -{ - if (drv->reg_data->reg_offset[reg]) - writel_relaxed(val, drv->reg_base + - drv->reg_data->reg_offset[reg]); -} - -/* Ensure a guaranteed write, before return */ -static inline void spm_register_write_sync(struct spm_driver_data *drv, - enum spm_reg reg, u32 val) -{ - u32 ret; - - if (!drv->reg_data->reg_offset[reg]) - return; - - do { - writel_relaxed(val, drv->reg_base + - drv->reg_data->reg_offset[reg]); - ret = readl_relaxed(drv->reg_base + - drv->reg_data->reg_offset[reg]); - if (ret == val) - break; - cpu_relax(); - } while (1); -} - -static inline u32 spm_register_read(struct spm_driver_data *drv, - enum spm_reg reg) -{ - return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]); -} - -static void spm_set_low_power_mode(struct spm_driver_data *drv, - enum pm_sleep_mode mode) -{ - u32 start_index; - u32 ctl_val; - - start_index = drv->reg_data->start_index[mode]; - - ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL); - ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT); - ctl_val |= start_index << SPM_CTL_INDEX_SHIFT; - ctl_val |= SPM_CTL_EN; - spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val); -} - static int qcom_pm_collapse(unsigned long int unused) { qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON); @@ -201,10 +61,10 @@ static int qcom_cpu_spc(struct spm_driver_data *drv) static int spm_enter_idle_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, int idx) { - struct spm_driver_data *data = container_of(drv, struct spm_driver_data, - cpuidle_driver); + struct cpuidle_qcom_spm_data *data = container_of(drv, struct cpuidle_qcom_spm_data, + cpuidle_driver); - return CPU_PM_CPU_IDLE_ENTER_PARAM(qcom_cpu_spc, idx, data); + return CPU_PM_CPU_IDLE_ENTER_PARAM(qcom_cpu_spc, idx, data->spm); } static struct cpuidle_driver qcom_spm_idle_driver = { @@ -225,134 +85,92 @@ static const struct of_device_id qcom_idle_state_match[] = { { }, }; -static int spm_cpuidle_init(struct cpuidle_driver *drv, int cpu) +static int spm_cpuidle_register(struct device *cpuidle_dev, int cpu) { + struct platform_device *pdev = NULL; + struct device_node *cpu_node, *saw_node; + struct cpuidle_qcom_spm_data *data = NULL; int ret; - memcpy(drv, &qcom_spm_idle_driver, sizeof(*drv)); - drv->cpumask = (struct cpumask *)cpumask_of(cpu); + cpu_node = of_cpu_device_node_get(cpu); + if (!cpu_node) + return -ENODEV; - /* Parse idle states from device tree */ - ret = dt_init_idle_driver(drv, qcom_idle_state_match, 1); - if (ret <= 0) - return ret ? : -ENODEV; + saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0); + if (!saw_node) + return -ENODEV; - /* We have atleast one power down mode */ - return qcom_scm_set_warm_boot_addr(cpu_resume_arm, drv->cpumask); -} + pdev = of_find_device_by_node(saw_node); + of_node_put(saw_node); + of_node_put(cpu_node); + if (!pdev) + return -ENODEV; -static struct spm_driver_data *spm_get_drv(struct platform_device *pdev, - int *spm_cpu) -{ - struct spm_driver_data *drv = NULL; - struct device_node *cpu_node, *saw_node; - int cpu; - bool found = 0; + data = devm_kzalloc(cpuidle_dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; - for_each_possible_cpu(cpu) { - cpu_node = of_cpu_device_node_get(cpu); - if (!cpu_node) - continue; - saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0); - found = (saw_node == pdev->dev.of_node); - of_node_put(saw_node); - of_node_put(cpu_node); - if (found) - break; - } + data->spm = dev_get_drvdata(&pdev->dev); + if (!data->spm) + return -EINVAL; - if (found) { - drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); - if (drv) - *spm_cpu = cpu; - } + data->cpuidle_driver = qcom_spm_idle_driver; + data->cpuidle_driver.cpumask = (struct cpumask *)cpumask_of(cpu); - return drv; -} + ret = dt_init_idle_driver(&data->cpuidle_driver, + qcom_idle_state_match, 1); + if (ret <= 0) + return ret ? : -ENODEV; -static const struct of_device_id spm_match_table[] = { - { .compatible = "qcom,msm8226-saw2-v2.1-cpu", - .data = &spm_reg_8226_cpu }, - { .compatible = "qcom,msm8974-saw2-v2.1-cpu", - .data = &spm_reg_8974_8084_cpu }, - { .compatible = "qcom,apq8084-saw2-v2.1-cpu", - .data = &spm_reg_8974_8084_cpu }, - { .compatible = "qcom,apq8064-saw2-v1.1-cpu", - .data = &spm_reg_8064_cpu }, - { }, -}; + ret = qcom_scm_set_warm_boot_addr(cpu_resume_arm, cpumask_of(cpu)); + if (ret) + return ret; + + return cpuidle_register(&data->cpuidle_driver, NULL); +} -static int spm_dev_probe(struct platform_device *pdev) +static int spm_cpuidle_drv_probe(struct platform_device *pdev) { - struct spm_driver_data *drv; - struct resource *res; - const struct of_device_id *match_id; - void __iomem *addr; int cpu, ret; if (!qcom_scm_is_available()) return -EPROBE_DEFER; - drv = spm_get_drv(pdev, &cpu); - if (!drv) - return -EINVAL; - platform_set_drvdata(pdev, drv); + for_each_possible_cpu(cpu) { + ret = spm_cpuidle_register(&pdev->dev, cpu); + if (ret && ret != -ENODEV) { + dev_err(&pdev->dev, + "Cannot register for CPU%d: %d\n", cpu, ret); + } + } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - drv->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(drv->reg_base)) - return PTR_ERR(drv->reg_base); + return 0; +} - match_id = of_match_node(spm_match_table, pdev->dev.of_node); - if (!match_id) - return -ENODEV; +static struct platform_driver spm_cpuidle_driver = { + .probe = spm_cpuidle_drv_probe, + .driver = { + .name = "qcom-spm-cpuidle", + .suppress_bind_attrs = true, + }, +}; - drv->reg_data = match_id->data; +static int __init qcom_spm_cpuidle_init(void) +{ + struct platform_device *pdev; + int ret; - ret = spm_cpuidle_init(&drv->cpuidle_driver, cpu); + ret = platform_driver_register(&spm_cpuidle_driver); if (ret) return ret; - /* Write the SPM sequences first.. */ - addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY]; - __iowrite32_copy(addr, drv->reg_data->seq, - ARRAY_SIZE(drv->reg_data->seq) / 4); - - /* - * ..and then the control registers. - * On some SoC if the control registers are written first and if the - * CPU was held in reset, the reset signal could trigger the SPM state - * machine, before the sequences are completely written. - */ - spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg); - spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly); - spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly); - spm_register_write(drv, SPM_REG_PMIC_DATA_0, - drv->reg_data->pmic_data[0]); - spm_register_write(drv, SPM_REG_PMIC_DATA_1, - drv->reg_data->pmic_data[1]); - - /* Set up Standby as the default low power mode */ - spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY); - - return cpuidle_register(&drv->cpuidle_driver, NULL); -} - -static int spm_dev_remove(struct platform_device *pdev) -{ - struct spm_driver_data *drv = platform_get_drvdata(pdev); + pdev = platform_device_register_simple("qcom-spm-cpuidle", + -1, NULL, 0); + if (IS_ERR(pdev)) { + platform_driver_unregister(&spm_cpuidle_driver); + return PTR_ERR(pdev); + } - cpuidle_unregister(&drv->cpuidle_driver); return 0; } - -static struct platform_driver spm_driver = { - .probe = spm_dev_probe, - .remove = spm_dev_remove, - .driver = { - .name = "saw", - .of_match_table = spm_match_table, - }, -}; - -builtin_platform_driver(spm_driver); +device_initcall(qcom_spm_cpuidle_init); diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 79b568f82a1c..fe3c486ae32d 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -190,6 +190,15 @@ config QCOM_SOCINFO Say yes here to support the Qualcomm socinfo driver, providing information about the SoC to user space. +config QCOM_SPM + tristate "Qualcomm Subsystem Power Manager (SPM)" + depends on ARCH_QCOM + select QCOM_SCM + help + Enable the support for the Qualcomm Subsystem Power Manager, used + to manage cores, L2 low power modes and to configure the internal + Adaptive Voltage Scaler parameters, where supported. + config QCOM_WCNSS_CTRL tristate "Qualcomm WCNSS control driver" depends on ARCH_QCOM || COMPILE_TEST diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index ad675a6593d0..24514c722832 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o obj-$(CONFIG_QCOM_SMP2P) += smp2p.o obj-$(CONFIG_QCOM_SMSM) += smsm.o obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o +obj-$(CONFIG_QCOM_SPM) += spm.o obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o obj-$(CONFIG_QCOM_APR) += apr.o obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c new file mode 100644 index 000000000000..ef20607877de --- /dev/null +++ b/drivers/soc/qcom/spm.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2014,2015, Linaro Ltd. + * + * SAW power controller driver + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <soc/qcom/spm.h> + +#define SPM_CTL_INDEX 0x7f +#define SPM_CTL_INDEX_SHIFT 4 +#define SPM_CTL_EN BIT(0) + +enum spm_reg { + SPM_REG_CFG, + SPM_REG_SPM_CTL, + SPM_REG_DLY, + SPM_REG_PMIC_DLY, + SPM_REG_PMIC_DATA_0, + SPM_REG_PMIC_DATA_1, + SPM_REG_VCTL, + SPM_REG_SEQ_ENTRY, + SPM_REG_SPM_STS, + SPM_REG_PMIC_STS, + SPM_REG_NR, +}; + +static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = { + [SPM_REG_CFG] = 0x08, + [SPM_REG_SPM_CTL] = 0x30, + [SPM_REG_DLY] = 0x34, + [SPM_REG_SEQ_ENTRY] = 0x80, +}; + +/* SPM register data for 8974, 8084 */ +static const struct spm_reg_data spm_reg_8974_8084_cpu = { + .reg_offset = spm_reg_offset_v2_1, + .spm_cfg = 0x1, + .spm_dly = 0x3C102800, + .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03, + 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30, + 0x0F }, + .start_index[PM_SLEEP_MODE_STBY] = 0, + .start_index[PM_SLEEP_MODE_SPC] = 3, +}; + +/* SPM register data for 8226 */ +static const struct spm_reg_data spm_reg_8226_cpu = { + .reg_offset = spm_reg_offset_v2_1, + .spm_cfg = 0x0, + .spm_dly = 0x3C102800, + .seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90, + 0x5B, 0x60, 0x03, 0x60, 0x3B, 0x76, 0x76, 0x0B, 0x94, 0x5B, + 0x80, 0x10, 0x26, 0x30, 0x0F }, + .start_index[PM_SLEEP_MODE_STBY] = 0, + .start_index[PM_SLEEP_MODE_SPC] = 5, +}; + +static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = { + [SPM_REG_CFG] = 0x08, + [SPM_REG_SPM_CTL] = 0x20, + [SPM_REG_PMIC_DLY] = 0x24, + [SPM_REG_PMIC_DATA_0] = 0x28, + [SPM_REG_PMIC_DATA_1] = 0x2C, + [SPM_REG_SEQ_ENTRY] = 0x80, +}; + +/* SPM register data for 8064 */ +static const struct spm_reg_data spm_reg_8064_cpu = { + .reg_offset = spm_reg_offset_v1_1, + .spm_cfg = 0x1F, + .pmic_dly = 0x02020004, + .pmic_data[0] = 0x0084009C, + .pmic_data[1] = 0x00A4001C, + .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01, + 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F }, + .start_index[PM_SLEEP_MODE_STBY] = 0, + .start_index[PM_SLEEP_MODE_SPC] = 2, +}; + +static inline void spm_register_write(struct spm_driver_data *drv, + enum spm_reg reg, u32 val) +{ + if (drv->reg_data->reg_offset[reg]) + writel_relaxed(val, drv->reg_base + + drv->reg_data->reg_offset[reg]); +} + +/* Ensure a guaranteed write, before return */ +static inline void spm_register_write_sync(struct spm_driver_data *drv, + enum spm_reg reg, u32 val) +{ + u32 ret; + + if (!drv->reg_data->reg_offset[reg]) + return; + + do { + writel_relaxed(val, drv->reg_base + + drv->reg_data->reg_offset[reg]); + ret = readl_relaxed(drv->reg_base + + drv->reg_data->reg_offset[reg]); + if (ret == val) + break; + cpu_relax(); + } while (1); +} + +static inline u32 spm_register_read(struct spm_driver_data *drv, + enum spm_reg reg) +{ + return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]); +} + +void spm_set_low_power_mode(struct spm_driver_data *drv, + enum pm_sleep_mode mode) +{ + u32 start_index; + u32 ctl_val; + + start_index = drv->reg_data->start_index[mode]; + + ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL); + ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT); + ctl_val |= start_index << SPM_CTL_INDEX_SHIFT; + ctl_val |= SPM_CTL_EN; + spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val); +} + +static const struct of_device_id spm_match_table[] = { + { .compatible = "qcom,msm8226-saw2-v2.1-cpu", + .data = &spm_reg_8226_cpu }, + { .compatible = "qcom,msm8974-saw2-v2.1-cpu", + .data = &spm_reg_8974_8084_cpu }, + { .compatible = "qcom,apq8084-saw2-v2.1-cpu", + .data = &spm_reg_8974_8084_cpu }, + { .compatible = "qcom,apq8064-saw2-v1.1-cpu", + .data = &spm_reg_8064_cpu }, + { }, +}; +MODULE_DEVICE_TABLE(of, spm_match_table); + +static int spm_dev_probe(struct platform_device *pdev) +{ + const struct of_device_id *match_id; + struct spm_driver_data *drv; + struct resource *res; + void __iomem *addr; + + drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drv->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(drv->reg_base)) + return PTR_ERR(drv->reg_base); + + match_id = of_match_node(spm_match_table, pdev->dev.of_node); + if (!match_id) + return -ENODEV; + + drv->reg_data = match_id->data; + platform_set_drvdata(pdev, drv); + + /* Write the SPM sequences first.. */ + addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY]; + __iowrite32_copy(addr, drv->reg_data->seq, + ARRAY_SIZE(drv->reg_data->seq) / 4); + + /* + * ..and then the control registers. + * On some SoC if the control registers are written first and if the + * CPU was held in reset, the reset signal could trigger the SPM state + * machine, before the sequences are completely written. + */ + spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg); + spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly); + spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly); + spm_register_write(drv, SPM_REG_PMIC_DATA_0, + drv->reg_data->pmic_data[0]); + spm_register_write(drv, SPM_REG_PMIC_DATA_1, + drv->reg_data->pmic_data[1]); + + /* Set up Standby as the default low power mode */ + spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY); + + return 0; +} + +static struct platform_driver spm_driver = { + .probe = spm_dev_probe, + .driver = { + .name = "qcom_spm", + .of_match_table = spm_match_table, + }, +}; + +static int __init qcom_spm_init(void) +{ + return platform_driver_register(&spm_driver); +} +arch_initcall(qcom_spm_init); + +MODULE_LICENSE("GPL v2"); diff --git a/include/soc/qcom/spm.h b/include/soc/qcom/spm.h new file mode 100644 index 000000000000..4c7e5ac2583d --- /dev/null +++ b/include/soc/qcom/spm.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2014,2015, Linaro Ltd. + */ + +#ifndef __SPM_H__ +#define __SPM_H__ + +#include <linux/cpuidle.h> + +#define MAX_PMIC_DATA 2 +#define MAX_SEQ_DATA 64 + +enum pm_sleep_mode { + PM_SLEEP_MODE_STBY, + PM_SLEEP_MODE_RET, + PM_SLEEP_MODE_SPC, + PM_SLEEP_MODE_PC, + PM_SLEEP_MODE_NR, +}; + +struct spm_reg_data { + const u8 *reg_offset; + u32 spm_cfg; + u32 spm_dly; + u32 pmic_dly; + u32 pmic_data[MAX_PMIC_DATA]; + u8 seq[MAX_SEQ_DATA]; + u8 start_index[PM_SLEEP_MODE_NR]; +}; + +struct spm_driver_data { + void __iomem *reg_base; + const struct spm_reg_data *reg_data; +}; + +void spm_set_low_power_mode(struct spm_driver_data *drv, + enum pm_sleep_mode mode); + +#endif /* __SPM_H__ */ |