summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml34
-rw-r--r--Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt9
-rw-r--r--drivers/firmware/xilinx/zynqmp.c46
-rw-r--r--drivers/soc/xilinx/Kconfig1
-rw-r--r--drivers/soc/xilinx/xlnx_vcu.c96
-rw-r--r--include/linux/firmware/xlnx-zynqmp.h45
-rw-r--r--include/linux/mfd/syscon/xlnx-vcu.h39
7 files changed, 186 insertions, 84 deletions
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
new file mode 100644
index 000000000000..378d0ced43c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/xilinx/xlnx,vcu-settings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx VCU Settings
+
+maintainers:
+ - Michael Tretter <kernel@pengutronix.de>
+
+description: |
+ The Xilinx VCU Settings provides information about the configuration of the
+ video codec unit.
+
+properties:
+ compatible:
+ items:
+ - const: xlnx,vcu-settings
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ xlnx_vcu: vcu@a0041000 {
+ compatible = "xlnx,vcu-settings", "syscon";
+ reg = <0x0 0xa0041000 0x0 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt
index 6786d6715df0..2417b13ba468 100644
--- a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt
+++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt
@@ -12,10 +12,7 @@ Required properties:
- compatible: shall be one of:
"xlnx,vcu"
"xlnx,vcu-logicoreip-1.0"
-- reg, reg-names: There are two sets of registers need to provide.
- 1. vcu slcr
- 2. Logicore
- reg-names should contain name for the each register sequence.
+- reg : The base offset and size of the VCU_PL_SLCR register space.
- clocks: phandle for aclk and pll_ref clocksource
- clock-names: The identification string, "aclk", is always required for
the axi clock. "pll_ref" is required for pll.
@@ -23,9 +20,7 @@ Example:
xlnx_vcu: vcu@a0040000 {
compatible = "xlnx,vcu-logicoreip-1.0";
- reg = <0x0 0xa0040000 0x0 0x1000>,
- <0x0 0xa0041000 0x0 0x1000>;
- reg-names = "vcu_slcr", "logicore";
+ reg = <0x0 0xa0040000 0x0 0x1000>;
clocks = <&si570_1>, <&clkc 71>;
clock-names = "pll_ref", "aclk";
};
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 8d1ff2454e2e..e5ac3008a1d7 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -585,13 +585,13 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data);
/**
* zynqmp_pm_set_sd_tapdelay() - Set tap delay for the SD device
*
- * @node_id Node ID of the device
- * @type Type of tap delay to set (input/output)
- * @value Value to set fot the tap delay
+ * @node_id: Node ID of the device
+ * @type: Type of tap delay to set (input/output)
+ * @value: Value to set fot the tap delay
*
* This function sets input/output tap delay for the SD device.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
{
@@ -603,12 +603,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
/**
* zynqmp_pm_sd_dll_reset() - Reset DLL logic
*
- * @node_id Node ID of the device
- * @type Reset type
+ * @node_id: Node ID of the device
+ * @type: Reset type
*
* This function resets DLL logic for the SD device.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
{
@@ -619,12 +619,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset);
/**
* zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs)
- * @index GGS register index
- * @value Register value to be written
+ * @index: GGS register index
+ * @value: Register value to be written
*
* This function writes value to GGS register.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_write_ggs(u32 index, u32 value)
{
@@ -635,12 +635,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_write_ggs);
/**
* zynqmp_pm_write_ggs() - PM API for reading global general storage (ggs)
- * @index GGS register index
- * @value Register value to be written
+ * @index: GGS register index
+ * @value: Register value to be written
*
* This function returns GGS register value.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_read_ggs(u32 index, u32 *value)
{
@@ -652,12 +652,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_read_ggs);
/**
* zynqmp_pm_write_pggs() - PM API for writing persistent global general
* storage (pggs)
- * @index PGGS register index
- * @value Register value to be written
+ * @index: PGGS register index
+ * @value: Register value to be written
*
* This function writes value to PGGS register.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_write_pggs(u32 index, u32 value)
{
@@ -669,12 +669,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_write_pggs);
/**
* zynqmp_pm_write_pggs() - PM API for reading persistent global general
* storage (pggs)
- * @index PGGS register index
- * @value Register value to be written
+ * @index: PGGS register index
+ * @value: Register value to be written
*
* This function returns PGGS register value.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_read_pggs(u32 index, u32 *value)
{
@@ -685,12 +685,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs);
/**
* zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status
- * @value Status value to be written
+ * @value: Status value to be written
*
* This function sets healthy bit value to indicate boot health status
* to firmware.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_boot_health_status(u32 value)
{
@@ -785,10 +785,10 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
* zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
* master has initialized its own power management
*
+ * Return: Returns status, either success or error+reason
+ *
* This API function is to be used for notify the power management controller
* about the completed power management initialization.
- *
- * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_init_finalize(void)
{
diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 646512d7276f..0b1708dae361 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -4,6 +4,7 @@ menu "Xilinx SoC drivers"
config XILINX_VCU
tristate "Xilinx VCU logicoreIP Init"
depends on HAS_IOMEM
+ select REGMAP_MMIO
help
Provides the driver to enable and disable the isolation between the
processing system and programmable logic part by using the logicoreIP
diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c
index a3aa40996f13..14daad4efc58 100644
--- a/drivers/soc/xilinx/xlnx_vcu.c
+++ b/drivers/soc/xilinx/xlnx_vcu.c
@@ -10,39 +10,12 @@
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/xlnx-vcu.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
-
-/* Address map for different registers implemented in the VCU LogiCORE IP. */
-#define VCU_ECODER_ENABLE 0x00
-#define VCU_DECODER_ENABLE 0x04
-#define VCU_MEMORY_DEPTH 0x08
-#define VCU_ENC_COLOR_DEPTH 0x0c
-#define VCU_ENC_VERTICAL_RANGE 0x10
-#define VCU_ENC_FRAME_SIZE_X 0x14
-#define VCU_ENC_FRAME_SIZE_Y 0x18
-#define VCU_ENC_COLOR_FORMAT 0x1c
-#define VCU_ENC_FPS 0x20
-#define VCU_MCU_CLK 0x24
-#define VCU_CORE_CLK 0x28
-#define VCU_PLL_BYPASS 0x2c
-#define VCU_ENC_CLK 0x30
-#define VCU_PLL_CLK 0x34
-#define VCU_ENC_VIDEO_STANDARD 0x38
-#define VCU_STATUS 0x3c
-#define VCU_AXI_ENC_CLK 0x40
-#define VCU_AXI_DEC_CLK 0x44
-#define VCU_AXI_MCU_CLK 0x48
-#define VCU_DEC_VIDEO_STANDARD 0x4c
-#define VCU_DEC_FRAME_SIZE_X 0x50
-#define VCU_DEC_FRAME_SIZE_Y 0x54
-#define VCU_DEC_FPS 0x58
-#define VCU_BUFFER_B_FRAME 0x5c
-#define VCU_WPP_EN 0x60
-#define VCU_PLL_CLK_DEC 0x64
-#define VCU_GASKET_INIT 0x74
-#define VCU_GASKET_VALUE 0x03
+#include <linux/regmap.h>
/* vcu slcr registers, bitmask and shift */
#define VCU_PLL_CTRL 0x24
@@ -106,11 +79,20 @@ struct xvcu_device {
struct device *dev;
struct clk *pll_ref;
struct clk *aclk;
- void __iomem *logicore_reg_ba;
+ struct regmap *logicore_reg_ba;
void __iomem *vcu_slcr_ba;
u32 coreclk;
};
+static struct regmap_config vcu_settings_regmap_config = {
+ .name = "regmap",
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0xfff,
+ .cache_type = REGCACHE_NONE,
+};
+
/**
* struct xvcu_pll_cfg - Helper data
* @fbdiv: The integer portion of the feedback divider to the PLL
@@ -300,10 +282,12 @@ static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu)
int ret, i;
const struct xvcu_pll_cfg *found = NULL;
- inte = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK);
- deci = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC);
- coreclk = xvcu_read(xvcu->logicore_reg_ba, VCU_CORE_CLK) * MHZ;
- mcuclk = xvcu_read(xvcu->logicore_reg_ba, VCU_MCU_CLK) * MHZ;
+ regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK, &inte);
+ regmap_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC, &deci);
+ regmap_read(xvcu->logicore_reg_ba, VCU_CORE_CLK, &coreclk);
+ coreclk *= MHZ;
+ regmap_read(xvcu->logicore_reg_ba, VCU_MCU_CLK, &mcuclk);
+ mcuclk *= MHZ;
if (!mcuclk || !coreclk) {
dev_err(xvcu->dev, "Invalid mcu and core clock data\n");
return -EINVAL;
@@ -498,6 +482,7 @@ static int xvcu_probe(struct platform_device *pdev)
{
struct resource *res;
struct xvcu_device *xvcu;
+ void __iomem *regs;
int ret;
xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL);
@@ -518,17 +503,32 @@ static int xvcu_probe(struct platform_device *pdev)
return -ENOMEM;
}
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "logicore");
- if (!res) {
- dev_err(&pdev->dev, "get logicore memory resource failed.\n");
- return -ENODEV;
- }
+ xvcu->logicore_reg_ba =
+ syscon_regmap_lookup_by_compatible("xlnx,vcu-settings");
+ if (IS_ERR(xvcu->logicore_reg_ba)) {
+ dev_info(&pdev->dev,
+ "could not find xlnx,vcu-settings: trying direct register access\n");
+
+ res = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM, "logicore");
+ if (!res) {
+ dev_err(&pdev->dev, "get logicore memory resource failed.\n");
+ return -ENODEV;
+ }
- xvcu->logicore_reg_ba = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
- if (!xvcu->logicore_reg_ba) {
- dev_err(&pdev->dev, "logicore register mapping failed.\n");
- return -ENOMEM;
+ regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!regs) {
+ dev_err(&pdev->dev, "logicore register mapping failed.\n");
+ return -ENOMEM;
+ }
+
+ xvcu->logicore_reg_ba =
+ devm_regmap_init_mmio(&pdev->dev, regs,
+ &vcu_settings_regmap_config);
+ if (IS_ERR(xvcu->logicore_reg_ba)) {
+ dev_err(&pdev->dev, "failed to init regmap\n");
+ return PTR_ERR(xvcu->logicore_reg_ba);
+ }
}
xvcu->aclk = devm_clk_get(&pdev->dev, "aclk");
@@ -560,7 +560,7 @@ static int xvcu_probe(struct platform_device *pdev)
* Bit 0 : Gasket isolation
* Bit 1 : put VCU out of reset
*/
- xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE);
+ regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE);
/* Do the PLL Settings based on the ref clk,core and mcu clk freq */
ret = xvcu_set_pll(xvcu);
@@ -571,8 +571,6 @@ static int xvcu_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, xvcu);
- dev_info(&pdev->dev, "%s: Probed successfully\n", __func__);
-
return 0;
error_pll_ref:
@@ -599,7 +597,7 @@ static int xvcu_remove(struct platform_device *pdev)
return -ENODEV;
/* Add the the Gasket isolation and put the VCU in reset. */
- xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0);
+ regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0);
clk_disable_unprepare(xvcu->pll_ref);
clk_disable_unprepare(xvcu->aclk);
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 5968df82b991..edc2977b26d9 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -13,6 +13,8 @@
#ifndef __FIRMWARE_ZYNQMP_H__
#define __FIRMWARE_ZYNQMP_H__
+#include <linux/err.h>
+
#define ZYNQMP_PM_VERSION_MAJOR 1
#define ZYNQMP_PM_VERSION_MINOR 0
@@ -314,7 +316,6 @@ struct zynqmp_pm_query_data {
u32 arg3;
};
-
int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
u32 arg2, u32 arg3, u32 *ret_payload);
@@ -362,147 +363,181 @@ static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
return ERR_PTR(-ENODEV);
}
+
static inline int zynqmp_pm_get_api_version(u32 *version)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_get_chipid(u32 *idcode, u32 *version)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata,
u32 *out)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_enable(u32 clock_id)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_disable(u32 clock_id)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_pll_frac_mode(u32 clk_id, u32 mode)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_get_pll_frac_mode(u32 clk_id, u32 *mode)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_pll_frac_data(u32 clk_id, u32 data)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_get_pll_frac_data(u32 clk_id, u32 *data)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
- const enum zynqmp_pm_reset_action assert_flag)
+ const enum zynqmp_pm_reset_action assert_flag)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
u32 *status)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_init_finalize(void)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_suspend_mode(u32 mode)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_request_node(const u32 node, const u32 capabilities,
const u32 qos,
const enum zynqmp_pm_request_ack ack)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_release_node(const u32 node)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_requirement(const u32 node,
- const u32 capabilities,
- const u32 qos,
- const enum zynqmp_pm_request_ack ack)
+ const u32 capabilities,
+ const u32 qos,
+ const enum zynqmp_pm_request_ack ack)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_aes_engine(const u64 address, u32 *out)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_fpga_load(const u64 address, const u32 size,
const u32 flags)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_fpga_get_status(u32 *value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_write_ggs(u32 index, u32 value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_read_ggs(u32 index, u32 *value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_write_pggs(u32 index, u32 value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_read_pggs(u32 index, u32 *value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_boot_health_status(u32 value)
{
return -ENODEV;
diff --git a/include/linux/mfd/syscon/xlnx-vcu.h b/include/linux/mfd/syscon/xlnx-vcu.h
new file mode 100644
index 000000000000..ff7bc3656f6e
--- /dev/null
+++ b/include/linux/mfd/syscon/xlnx-vcu.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Pengutronix, Michael Tretter <kernel@pengutronix.de>
+ */
+
+#ifndef __XLNX_VCU_H
+#define __XLNX_VCU_H
+
+#define VCU_ECODER_ENABLE 0x00
+#define VCU_DECODER_ENABLE 0x04
+#define VCU_MEMORY_DEPTH 0x08
+#define VCU_ENC_COLOR_DEPTH 0x0c
+#define VCU_ENC_VERTICAL_RANGE 0x10
+#define VCU_ENC_FRAME_SIZE_X 0x14
+#define VCU_ENC_FRAME_SIZE_Y 0x18
+#define VCU_ENC_COLOR_FORMAT 0x1c
+#define VCU_ENC_FPS 0x20
+#define VCU_MCU_CLK 0x24
+#define VCU_CORE_CLK 0x28
+#define VCU_PLL_BYPASS 0x2c
+#define VCU_ENC_CLK 0x30
+#define VCU_PLL_CLK 0x34
+#define VCU_ENC_VIDEO_STANDARD 0x38
+#define VCU_STATUS 0x3c
+#define VCU_AXI_ENC_CLK 0x40
+#define VCU_AXI_DEC_CLK 0x44
+#define VCU_AXI_MCU_CLK 0x48
+#define VCU_DEC_VIDEO_STANDARD 0x4c
+#define VCU_DEC_FRAME_SIZE_X 0x50
+#define VCU_DEC_FRAME_SIZE_Y 0x54
+#define VCU_DEC_FPS 0x58
+#define VCU_BUFFER_B_FRAME 0x5c
+#define VCU_WPP_EN 0x60
+#define VCU_PLL_CLK_DEC 0x64
+#define VCU_NUM_CORE 0x6c
+#define VCU_GASKET_INIT 0x74
+#define VCU_GASKET_VALUE 0x03
+
+#endif /* __XLNX_VCU_H */