summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/memory/mvebu-devbus.c48
1 files changed, 24 insertions, 24 deletions
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index b59a17fb7c3e..e66de7f3c33c 100644
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -30,19 +30,19 @@
#include <linux/platform_device.h>
/* Register definitions */
-#define DEV_WIDTH_BIT 30
-#define BADR_SKEW_BIT 28
-#define RD_HOLD_BIT 23
-#define ACC_NEXT_BIT 17
-#define RD_SETUP_BIT 12
-#define ACC_FIRST_BIT 6
+#define ARMADA_DEV_WIDTH_BIT 30
+#define ARMADA_BADR_SKEW_BIT 28
+#define ARMADA_RD_HOLD_BIT 23
+#define ARMADA_ACC_NEXT_BIT 17
+#define ARMADA_RD_SETUP_BIT 12
+#define ARMADA_ACC_FIRST_BIT 6
-#define SYNC_ENABLE_BIT 24
-#define WR_HIGH_BIT 16
-#define WR_LOW_BIT 8
+#define ARMADA_SYNC_ENABLE_BIT 24
+#define ARMADA_WR_HIGH_BIT 16
+#define ARMADA_WR_LOW_BIT 8
-#define READ_PARAM_OFFSET 0x0
-#define WRITE_PARAM_OFFSET 0x4
+#define ARMADA_READ_PARAM_OFFSET 0x0
+#define ARMADA_WRITE_PARAM_OFFSET 0x4
struct devbus_read_params {
u32 bus_width;
@@ -178,31 +178,31 @@ static int devbus_set_timing_params(struct devbus *devbus,
return err;
/* Set read timings */
- value = r.bus_width << DEV_WIDTH_BIT |
- r.badr_skew << BADR_SKEW_BIT |
- r.rd_hold << RD_HOLD_BIT |
- r.acc_next << ACC_NEXT_BIT |
- r.rd_setup << RD_SETUP_BIT |
- r.acc_first << ACC_FIRST_BIT |
+ value = r.bus_width << ARMADA_DEV_WIDTH_BIT |
+ r.badr_skew << ARMADA_BADR_SKEW_BIT |
+ r.rd_hold << ARMADA_RD_HOLD_BIT |
+ r.acc_next << ARMADA_ACC_NEXT_BIT |
+ r.rd_setup << ARMADA_RD_SETUP_BIT |
+ r.acc_first << ARMADA_ACC_FIRST_BIT |
r.turn_off;
dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n",
- devbus->base + READ_PARAM_OFFSET,
+ devbus->base + ARMADA_READ_PARAM_OFFSET,
value);
- writel(value, devbus->base + READ_PARAM_OFFSET);
+ writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET);
/* Set write timings */
- value = w.sync_enable << SYNC_ENABLE_BIT |
- w.wr_low << WR_LOW_BIT |
- w.wr_high << WR_HIGH_BIT |
+ value = w.sync_enable << ARMADA_SYNC_ENABLE_BIT |
+ w.wr_low << ARMADA_WR_LOW_BIT |
+ w.wr_high << ARMADA_WR_HIGH_BIT |
w.ale_wr;
dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n",
- devbus->base + WRITE_PARAM_OFFSET,
+ devbus->base + ARMADA_WRITE_PARAM_OFFSET,
value);
- writel(value, devbus->base + WRITE_PARAM_OFFSET);
+ writel(value, devbus->base + ARMADA_WRITE_PARAM_OFFSET);
return 0;
}