summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-s3c/mach-gta02.c10
-rw-r--r--arch/arm/mach-s3c/mach-h1940.c13
-rw-r--r--arch/arm/mach-s3c/mach-jive.c10
-rw-r--r--arch/arm/mach-s3c/mach-mini2440.c9
-rw-r--r--arch/arm/mach-s3c/mach-n30.c13
-rw-r--r--arch/arm/mach-s3c/mach-rx1950.c13
-rw-r--r--arch/arm/mach-s3c/mach-smdk2413.c12
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.c78
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.h3
-rw-r--r--include/linux/platform_data/usb-s3c2410_udc.h6
10 files changed, 100 insertions, 67 deletions
diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
index abfdce765525..d50a81d85ae1 100644
--- a/arch/arm/mach-s3c/mach-gta02.c
+++ b/arch/arm/mach-s3c/mach-gta02.c
@@ -421,7 +421,14 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
/* Get PMU to set USB current limit accordingly. */
static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
.vbus_draw = gta02_udc_vbus_draw,
- .pullup_pin = GTA02_GPIO_USB_PULLUP,
+};
+
+static struct gpiod_lookup_table gta02_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOB", 9, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
/* USB */
@@ -555,6 +562,7 @@ static void __init gta02_machine_init(void)
s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
S3C_GPIO_PULL_NONE);
+ gpiod_add_lookup_table(&gta02_udc_gpio_table);
gpiod_add_lookup_table(&gta02_audio_gpio_table);
gpiod_add_lookup_table(&gta02_mmc_gpio_table);
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
index 032b18837855..83ac6cfdb1d8 100644
--- a/arch/arm/mach-s3c/mach-h1940.c
+++ b/arch/arm/mach-s3c/mach-h1940.c
@@ -167,9 +167,15 @@ static struct gpio_chip h1940_latch_gpiochip = {
};
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(5),
- .vbus_pin_inverted = 1,
- .pullup_pin = H1940_LATCH_USB_DP,
+};
+
+static struct gpiod_lookup_table h1940_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("H1940_LATCH", 7, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
@@ -725,6 +731,7 @@ static void __init h1940_init(void)
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
+ gpiod_add_lookup_table(&h1940_udc_gpio_table);
gpiod_add_lookup_table(&h1940_mmc_gpio_table);
gpiod_add_lookup_table(&h1940_audio_gpio_table);
gpiod_add_lookup_table(&h1940_bat_gpio_table);
diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
index e32773175944..16859bb3bb13 100644
--- a/arch/arm/mach-s3c/mach-jive.c
+++ b/arch/arm/mach-s3c/mach-jive.c
@@ -493,7 +493,14 @@ static struct platform_device *jive_devices[] __initdata = {
};
static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
+};
+
+static struct gpiod_lookup_table jive_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
/* Jive power management device */
@@ -669,6 +676,7 @@ static void __init jive_machine_init(void)
pm_power_off = jive_power_off;
+ gpiod_add_lookup_table(&jive_udc_gpio_table);
gpiod_add_lookup_table(&jive_lcdspi_gpiod_table);
gpiod_add_lookup_table(&jive_wm8750_gpiod_table);
platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
index a6d17ffcdba1..283be70ca622 100644
--- a/arch/arm/mach-s3c/mach-mini2440.c
+++ b/arch/arm/mach-s3c/mach-mini2440.c
@@ -93,9 +93,15 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
/* USB device UDC support */
static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
- .pullup_pin = S3C2410_GPC(5),
};
+static struct gpiod_lookup_table mini2440_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOC", 5, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
/* LCD timing and setup */
@@ -755,6 +761,7 @@ static void __init mini2440_init(void)
s3c24xx_fb_set_platdata(&mini2440_fb_info);
}
+ gpiod_add_lookup_table(&mini2440_udc_gpio_table);
s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
index 75f5dc6351a1..90122fc6b2aa 100644
--- a/arch/arm/mach-s3c/mach-n30.c
+++ b/arch/arm/mach-s3c/mach-n30.c
@@ -84,9 +84,15 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
};
static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(1),
- .vbus_pin_inverted = 0,
- .pullup_pin = S3C2410_GPB(3),
+};
+
+static struct gpiod_lookup_table n30_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOB", 3, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct gpio_keys_button n30_buttons[] = {
@@ -595,6 +601,7 @@ static void __init n30_init(void)
WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
s3c24xx_fb_set_platdata(&n30_fb_info);
+ gpiod_add_lookup_table(&n30_udc_gpio_table);
s3c24xx_udc_set_platdata(&n30_udc_cfg);
gpiod_add_lookup_table(&n30_mci_gpio_table);
s3c24xx_mci_set_platdata(&n30_mci_cfg);
diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
index 7a3e7c0a6484..d8c49e562660 100644
--- a/arch/arm/mach-s3c/mach-rx1950.c
+++ b/arch/arm/mach-s3c/mach-rx1950.c
@@ -643,9 +643,15 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
};
static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG(5),
- .vbus_pin_inverted = 1,
- .pullup_pin = S3C2410_GPJ(5),
+};
+
+static struct gpiod_lookup_table rx1950_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOJ", 5, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
@@ -847,6 +853,7 @@ static void __init rx1950_init_machine(void)
gpio_direction_output(S3C2410_GPJ(6), 0);
pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
+ gpiod_add_lookup_table(&rx1950_udc_gpio_table);
gpiod_add_lookup_table(&rx1950_audio_gpio_table);
gpiod_add_lookup_table(&rx1950_bat_gpio_table);
/* Configure the I2S pins (GPE0...GPE4) in correct mode */
diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
index f1f0ec174579..2b4e20aaa346 100644
--- a/arch/arm/mach-s3c/mach-smdk2413.c
+++ b/arch/arm/mach-s3c/mach-smdk2413.c
@@ -12,7 +12,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
@@ -74,9 +74,15 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
- .pullup_pin = S3C2410_GPF(2),
};
+static struct gpiod_lookup_table smdk2413_udc_gpio_table = {
+ .dev_id = "s3c2410-usbgadget",
+ .table = {
+ GPIO_LOOKUP("GPIOF", 2, "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_ohci,
@@ -115,7 +121,7 @@ static void __init smdk2413_machine_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
-
+ gpiod_add_lookup_table(&smdk2413_udc_gpio_table);
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
s3c_i2c0_set_platdata(NULL);
/* Configure the I2S pins (GPE0...GPE4) in correct mode */
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index c6625aeb7bca..8c57b191e52b 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -23,7 +23,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/prefetch.h>
#include <linux/io.h>
@@ -1419,8 +1419,7 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on)
{
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
- if (udc_info && (udc_info->udc_command ||
- gpio_is_valid(udc_info->pullup_pin))) {
+ if (udc_info && (udc_info->udc_command || udc->pullup_gpiod)) {
if (is_on)
s3c2410_udc_enable(udc);
@@ -1467,9 +1466,7 @@ static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev)
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
- value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0;
- if (udc_info->vbus_pin_inverted)
- value = !value;
+ value = gpiod_get_value(dev->vbus_gpiod);
if (value != dev->vbus)
s3c2410_udc_vbus_session(&dev->gadget, value);
@@ -1504,14 +1501,15 @@ static const struct usb_gadget_ops s3c2410_ops = {
.udc_stop = s3c2410_udc_stop,
};
-static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd)
+static void s3c2410_udc_command(struct s3c2410_udc *udc,
+ enum s3c2410_udc_cmd_e cmd)
{
if (!udc_info)
return;
if (udc_info->udc_command) {
udc_info->udc_command(cmd);
- } else if (gpio_is_valid(udc_info->pullup_pin)) {
+ } else if (udc->pullup_gpiod) {
int value;
switch (cmd) {
@@ -1524,9 +1522,8 @@ static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd)
default:
return;
}
- value ^= udc_info->pullup_pin_inverted;
- gpio_set_value(udc_info->pullup_pin, value);
+ gpiod_set_value(udc->pullup_gpiod, value);
}
}
@@ -1551,7 +1548,7 @@ static void s3c2410_udc_disable(struct s3c2410_udc *dev)
udc_write(0x1F, S3C2410_UDC_EP_INT_REG);
/* Good bye, cruel world */
- s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
+ s3c2410_udc_command(dev, S3C2410_UDC_P_DISABLE);
/* Set speed to unknown */
dev->gadget.speed = USB_SPEED_UNKNOWN;
@@ -1613,7 +1610,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev)
udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG);
/* time to say "hello, world" */
- s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
+ s3c2410_udc_command(dev, S3C2410_UDC_P_ENABLE);
}
static int s3c2410_udc_start(struct usb_gadget *g,
@@ -1802,14 +1799,15 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
dev_dbg(dev, "got irq %i\n", irq_usbd);
- if (udc_info && udc_info->vbus_pin > 0) {
- retval = gpio_request(udc_info->vbus_pin, "udc vbus");
- if (retval < 0) {
- dev_err(dev, "cannot claim vbus pin\n");
- goto err_int;
- }
+ udc->vbus_gpiod = gpiod_get_optional(dev, "vbus", GPIOD_IN);
+ if (IS_ERR(udc->vbus_gpiod)) {
+ retval = PTR_ERR(udc->vbus_gpiod);
+ goto err_int;
+ }
+ if (udc->vbus_gpiod) {
+ gpiod_set_consumer_name(udc->vbus_gpiod, "udc vbus");
- irq = gpio_to_irq(udc_info->vbus_pin);
+ irq = gpiod_to_irq(udc->vbus_gpiod);
if (irq < 0) {
dev_err(dev, "no irq for gpio vbus pin\n");
retval = irq;
@@ -1833,16 +1831,12 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
udc->vbus = 1;
}
- if (udc_info && !udc_info->udc_command &&
- gpio_is_valid(udc_info->pullup_pin)) {
-
- retval = gpio_request_one(udc_info->pullup_pin,
- udc_info->vbus_pin_inverted ?
- GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
- "udc pullup");
- if (retval)
- goto err_vbus_irq;
+ udc->pullup_gpiod = gpiod_get_optional(dev, "pullup", GPIOD_OUT_LOW);
+ if (IS_ERR(udc->pullup_gpiod)) {
+ retval = PTR_ERR(udc->pullup_gpiod);
+ goto err_vbus_irq;
}
+ gpiod_set_consumer_name(udc->pullup_gpiod, "udc pullup");
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
@@ -1856,15 +1850,10 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
return 0;
err_add_udc:
- if (udc_info && !udc_info->udc_command &&
- gpio_is_valid(udc_info->pullup_pin))
- gpio_free(udc_info->pullup_pin);
err_vbus_irq:
- if (udc_info && udc_info->vbus_pin > 0)
- free_irq(gpio_to_irq(udc_info->vbus_pin), udc);
+ if (udc->vbus_gpiod)
+ free_irq(gpiod_to_irq(udc->vbus_gpiod), udc);
err_gpio_claim:
- if (udc_info && udc_info->vbus_pin > 0)
- gpio_free(udc_info->vbus_pin);
err_int:
free_irq(irq_usbd, udc);
err_udc_clk:
@@ -1885,7 +1874,6 @@ err_usb_bus_clk:
static int s3c2410_udc_remove(struct platform_device *pdev)
{
struct s3c2410_udc *udc = platform_get_drvdata(pdev);
- unsigned int irq;
dev_dbg(&pdev->dev, "%s()\n", __func__);
@@ -1895,14 +1883,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
usb_del_gadget_udc(&udc->gadget);
debugfs_remove(debugfs_lookup("registers", s3c2410_udc_debugfs_root));
- if (udc_info && !udc_info->udc_command &&
- gpio_is_valid(udc_info->pullup_pin))
- gpio_free(udc_info->pullup_pin);
-
- if (udc_info && udc_info->vbus_pin > 0) {
- irq = gpio_to_irq(udc_info->vbus_pin);
- free_irq(irq, udc);
- }
+ if (udc->vbus_gpiod)
+ free_irq(gpiod_to_irq(udc->vbus_gpiod), udc);
free_irq(irq_usbd, udc);
@@ -1926,14 +1908,18 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
static int
s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message)
{
- s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
+ struct s3c2410_udc *udc = platform_get_drvdata(pdev);
+
+ s3c2410_udc_command(udc, S3C2410_UDC_P_DISABLE);
return 0;
}
static int s3c2410_udc_resume(struct platform_device *pdev)
{
- s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
+ struct s3c2410_udc *udc = platform_get_drvdata(pdev);
+
+ s3c2410_udc_command(udc, S3C2410_UDC_P_ENABLE);
return 0;
}
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
index 135a5bff3c74..cdbf202e5ee8 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.h
+++ b/drivers/usb/gadget/udc/s3c2410_udc.h
@@ -83,6 +83,9 @@ struct s3c2410_udc {
u32 port_status;
int ep0state;
+ struct gpio_desc *vbus_gpiod;
+ struct gpio_desc *pullup_gpiod;
+
unsigned got_irq : 1;
unsigned req_std : 1;
diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h
index 07394819d03b..c0fbe1fe3426 100644
--- a/include/linux/platform_data/usb-s3c2410_udc.h
+++ b/include/linux/platform_data/usb-s3c2410_udc.h
@@ -22,12 +22,6 @@ enum s3c2410_udc_cmd_e {
struct s3c2410_udc_mach_info {
void (*udc_command)(enum s3c2410_udc_cmd_e);
void (*vbus_draw)(unsigned int ma);
-
- unsigned int pullup_pin;
- unsigned int pullup_pin_inverted;
-
- unsigned int vbus_pin;
- unsigned char vbus_pin_inverted;
};
extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);