diff options
25 files changed, 94 insertions, 132 deletions
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index a2e679112737..909f8c944d70 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -96,13 +96,13 @@ properties: - items: - enum: - - lge,lenok + - lg,lenok - const: qcom,apq8026 - items: - enum: - - asus,nexus4-mako - asus,nexus7-flo + - lg,nexus4-mako - sony,xperia-yuga - qcom,apq8064-cm-qs600 - qcom,apq8064-ifc6410 @@ -174,6 +174,7 @@ properties: - items: - enum: + - qcom,ipq4019-ap-dk01.1-c1 - qcom,ipq4019-ap-dk04.1-c3 - qcom,ipq4019-ap-dk07.1-c1 - qcom,ipq4019-ap-dk07.1-c2 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 52f4fe6214d5..756fedaca5eb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -954,7 +954,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ ox810se-wd-mbwe.dtb \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8026-lge-lenok.dtb \ + qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8026-lge-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts index bdc06e52d283..f350c4e8c194 100644 --- a/arch/arm/boot/dts/qcom-apq8026-lge-lenok.dts +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts @@ -10,7 +10,7 @@ / { model = "LG G Watch R"; - compatible = "lge,lenok", "qcom,apq8026"; + compatible = "lg,lenok", "qcom,apq8026"; qcom,board-id = <132 0x0a>; qcom,msm-id = <199 0x20000>; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index e1189e929ee6..d664ccd454c5 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -357,8 +357,8 @@ }; mpps@50 { - dragon_cm3605_mpps: cm3605-mpps { - pinconf { + dragon_cm3605_mpps: cm3605-mpps-state { + mpp5 { pins = "mpp5"; function = "analog"; input-enable; @@ -899,7 +899,7 @@ }; amba { /* Internal 3.69 GiB eMMC */ - sdcc@12400000 { + mmc@12400000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_sdcc1_pins>; @@ -908,7 +908,7 @@ }; /* External micro SD card, directly connected, pulled up to 2.85 V */ - sdcc@12180000 { + mmc@12180000 { status = "okay"; /* Enable SSBI GPIO 22 as input, use for card detect */ pinctrl-names = "default"; @@ -922,7 +922,7 @@ * Second external micro SD card, using two TXB104RGYR levelshifters * to lift from 1.8 V to 2.85 V */ - sdcc@12200000 { + mmc@12200000 { status = "okay"; /* Enable SSBI GPIO 26 as input, use for card detect */ pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index 3bce47d16ab3..9a835335bf78 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -335,7 +335,7 @@ amba { /* eMMC */ - sdcc@12400000 { + mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 0148148a8e0a..e068a8d0adf0 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -220,14 +220,14 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; pinctrl-names = "default"; @@ -235,7 +235,7 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; vqmmc-supply = <&v3p3_fixed>; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index d0a17b5a5fa3..2638b380be20 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -314,14 +314,14 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&pm8921_l6>; pinctrl-names = "default"; @@ -329,7 +329,7 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { status = "okay"; vmmc-supply = <&ext_3p3v>; vqmmc-supply = <&pm8921_lvs1>; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index 72e47bdc5c12..f8c97efc61fc 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -374,14 +374,14 @@ }; amba { - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&pm8921_l6>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 353fdbd52804..030af538c025 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -101,7 +101,7 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -122,7 +122,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -143,7 +143,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -164,7 +164,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -683,12 +683,11 @@ pm8821_mpps: mpps@50 { compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; reg = <0x50>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pm8821_mpps 0 0 4>; }; }; }; @@ -726,19 +725,9 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupts = - <128 IRQ_TYPE_NONE>, - <129 IRQ_TYPE_NONE>, - <130 IRQ_TYPE_NONE>, - <131 IRQ_TYPE_NONE>, - <132 IRQ_TYPE_NONE>, - <133 IRQ_TYPE_NONE>, - <134 IRQ_TYPE_NONE>, - <135 IRQ_TYPE_NONE>, - <136 IRQ_TYPE_NONE>, - <137 IRQ_TYPE_NONE>, - <138 IRQ_TYPE_NONE>, - <139 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8921_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; }; rtc@11d { @@ -1084,7 +1073,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; pinctrl-names = "default"; @@ -1104,7 +1093,7 @@ dma-names = "tx", "rx"; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -1122,7 +1111,7 @@ dma-names = "tx", "rx"; }; - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -1424,9 +1413,9 @@ clocks = <&mmcc HDMI_APP_CLK>, <&mmcc HDMI_M_AHB_CLK>, <&mmcc HDMI_S_AHB_CLK>; - clock-names = "core_clk", - "master_iface_clk", - "slave_iface_clk"; + clock-names = "core", + "master_iface", + "slave_iface"; phys = <&hdmi_phy>; phy-names = "hdmi-phy"; @@ -1457,7 +1446,7 @@ "hdmi_pll"; clocks = <&mmcc HDMI_S_AHB_CLK>; - clock-names = "slave_iface_clk"; + clock-names = "slave_iface"; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index bf6a03506b45..52240fc7a1a6 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -102,7 +102,7 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -122,7 +122,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -142,7 +142,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -162,7 +162,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts index 0d92f1bc3a13..ddaa273f72ca 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts @@ -18,5 +18,5 @@ / { model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; - + compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index c93b2164db44..0c10d9e096db 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -18,7 +18,6 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; - compatible = "qcom,ipq4019"; aliases { serial0 = &blsp1_uart1; diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index f7ea2e5dd191..596d129d4a95 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -19,12 +19,12 @@ stdout-path = "serial0:115200n8"; }; - memory@0 { + memory@42000000 { reg = <0x42000000 0x3e000000>; device_type = "memory"; }; - mdio0: mdio@0 { + mdio0: mdio-0 { status = "okay"; compatible = "virtual,mdio-gpio"; gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, @@ -91,7 +91,7 @@ }; }; - mdio1: mdio@1 { + mdio1: mdio-1 { status = "okay"; compatible = "virtual,mdio-gpio"; gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, @@ -172,7 +172,7 @@ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - norflash: s25fl016k@0 { + norflash: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 4139d3817bd6..11481313bdb6 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -49,7 +49,7 @@ }; thermal-zones { - tsens_tz_sensor0 { + sensor0-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 0>; @@ -69,7 +69,7 @@ }; }; - tsens_tz_sensor1 { + sensor1-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 1>; @@ -89,7 +89,7 @@ }; }; - tsens_tz_sensor2 { + sensor2-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 2>; @@ -109,7 +109,7 @@ }; }; - tsens_tz_sensor3 { + sensor3-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 3>; @@ -129,7 +129,7 @@ }; }; - tsens_tz_sensor4 { + sensor4-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 4>; @@ -149,7 +149,7 @@ }; }; - tsens_tz_sensor5 { + sensor5-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 5>; @@ -169,7 +169,7 @@ }; }; - tsens_tz_sensor6 { + sensor6-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 6>; @@ -189,7 +189,7 @@ }; }; - tsens_tz_sensor7 { + sensor7-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 7>; @@ -209,7 +209,7 @@ }; }; - tsens_tz_sensor8 { + sensor8-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 8>; @@ -229,7 +229,7 @@ }; }; - tsens_tz_sensor9 { + sensor9-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 9>; @@ -249,7 +249,7 @@ }; }; - tsens_tz_sensor10 { + sensor10-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 10>; @@ -1181,7 +1181,7 @@ #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -1201,7 +1201,7 @@ dma-names = "tx", "rx"; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi index a725b73b5a2e..10ad929759ed 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi @@ -49,7 +49,7 @@ model = "Sierra Wireless WP8548 Module"; compatible = "swir,wp8548", "qcom,mdm9615"; - memory { + memory@48000000 { device_type = "memory"; reg = <0x48000000 0x7F00000>; }; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index dda2ceec6591..c32415f0e66d 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -300,18 +300,14 @@ pull-up; }; - pmicmpp: mpp@50 { + pmicmpp: mpps@50 { compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x50>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmicmpp 0 0 6>; }; rtc@11d { @@ -358,7 +354,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12180000 { + sdcc1: mmc@12180000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -378,7 +374,7 @@ assigned-clock-rates = <400000>; }; - sdcc2: sdcc@12140000 { + sdcc2: mmc@12140000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 6a321ccb0bd0..414280d9bdba 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -35,13 +35,13 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&vsdcc_fixed>; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&vsdcc_fixed>; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 480fc08cbe8e..1e8aab357f9c 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -307,20 +307,9 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&pm8058>; - interrupts = - <128 IRQ_TYPE_NONE>, - <129 IRQ_TYPE_NONE>, - <130 IRQ_TYPE_NONE>, - <131 IRQ_TYPE_NONE>, - <132 IRQ_TYPE_NONE>, - <133 IRQ_TYPE_NONE>, - <134 IRQ_TYPE_NONE>, - <135 IRQ_TYPE_NONE>, - <136 IRQ_TYPE_NONE>, - <137 IRQ_TYPE_NONE>, - <138 IRQ_TYPE_NONE>, - <139 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8058_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; }; pwrkey@1c { @@ -494,7 +483,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -510,7 +499,7 @@ cap-mmc-highspeed; }; - sdcc2: sdcc@12140000 { + sdcc2: mmc@12140000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -525,7 +514,7 @@ cap-mmc-highspeed; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -541,7 +530,7 @@ no-1-8-v; }; - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -556,7 +545,7 @@ cap-mmc-highspeed; }; - sdcc5: sdcc@12200000 { + sdcc5: mmc@12200000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index e7d2e937ea4c..4af01039c3b2 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -26,12 +26,12 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 172ea3c70eac..2a0ec97a264f 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -263,7 +263,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -280,7 +280,7 @@ vmmc-supply = <&vsdcc_fixed>; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 2b01bc29ddf2..412d94736c35 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -142,7 +142,7 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -162,7 +162,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -182,7 +182,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -202,7 +202,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -282,7 +282,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -297,7 +297,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 2fd59c440903..2caf71eacb52 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -15,10 +15,9 @@ reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <4 0xa0 0 IRQ_TYPE_NONE>, - <4 0xa1 0 IRQ_TYPE_NONE>, - <4 0xa2 0 IRQ_TYPE_NONE>, - <4 0xa3 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8841_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; }; temp-alarm@2400 { diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index c1f2012d1c8b..da00b8f5eecd 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -79,14 +79,9 @@ reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8941_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; pm8941_temp: temp-alarm@2400 { diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index e921c5e93a5d..7b8a8d9695da 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -42,14 +42,9 @@ reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pma8084_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; pma8084_temp: temp-alarm@2400 { diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index 1e6ce035f76a..44526ad9d210 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -228,7 +228,6 @@ compatible = "qcom,sdx55-qmp-usb3-uni-phy"; reg = <0x00ff6000 0x1c0>; status = "disabled"; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; |