summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-davinci.txt2
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-rcar.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt4
-rw-r--r--Documentation/i2c/busses/i2c-mlxcpld4
-rw-r--r--Documentation/i2c/busses/i2c-ocores2
-rw-r--r--Documentation/i2c/muxes/i2c-mux-gpio4
-rw-r--r--MAINTAINERS8
-rw-r--r--arch/arm/mach-ks8695/board-acs5k.c2
-rw-r--r--arch/arm/mach-omap1/board-htcherald.c2
-rw-r--r--arch/arm/mach-omap1/common.h2
-rw-r--r--arch/arm/mach-omap1/i2c.c2
-rw-r--r--arch/arm/mach-omap2/common.h2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_33xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_54xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c2
-rw-r--r--arch/arm/mach-pxa/palmz72.c2
-rw-r--r--arch/arm/mach-pxa/viper.c2
-rw-r--r--arch/arm/mach-sa1100/simpad.c2
-rw-r--r--arch/mips/alchemy/board-gpr.c2
-rw-r--r--arch/sh/boards/board-sh7785lcr.c2
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c4
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c5
-rw-r--r--drivers/i2c/algos/i2c-algo-pcf.c8
-rw-r--r--drivers/i2c/busses/Kconfig1
-rw-r--r--drivers/i2c/busses/Makefile3
-rw-r--r--drivers/i2c/busses/i2c-aspeed.c3
-rw-r--r--drivers/i2c/busses/i2c-at91.c12
-rw-r--r--drivers/i2c/busses/i2c-axxia.c31
-rw-r--r--drivers/i2c/busses/i2c-designware-common.c20
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h14
-rw-r--r--drivers/i2c/busses/i2c-designware-master.c8
-rw-r--r--drivers/i2c/busses/i2c-designware-slave.c6
-rw-r--r--drivers/i2c/busses/i2c-diolan-u2c.c11
-rw-r--r--drivers/i2c/busses/i2c-efm32.c3
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c5
-rw-r--r--drivers/i2c/busses/i2c-emev2.c2
-rw-r--r--drivers/i2c/busses/i2c-exynos5.c29
-rw-r--r--drivers/i2c/busses/i2c-gpio.c2
-rw-r--r--drivers/i2c/busses/i2c-hix5hd2.c22
-rw-r--r--drivers/i2c/busses/i2c-i801.c7
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c3
-rw-r--r--drivers/i2c/busses/i2c-imx-lpi2c.c16
-rw-r--r--drivers/i2c/busses/i2c-imx.c21
-rw-r--r--drivers/i2c/busses/i2c-kempld.c7
-rw-r--r--drivers/i2c/busses/i2c-mlxcpld.c68
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c8
-rw-r--r--drivers/i2c/busses/i2c-mxs.c16
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c2
-rw-r--r--drivers/i2c/busses/i2c-ocores.c7
-rw-r--r--drivers/i2c/busses/i2c-omap.c2
-rw-r--r--drivers/i2c/busses/i2c-opal.c4
-rw-r--r--drivers/i2c/busses/i2c-pasemi.c2
-rw-r--r--drivers/i2c/busses/i2c-pca-platform.c2
-rw-r--r--drivers/i2c/busses/i2c-pnx.c21
-rw-r--r--drivers/i2c/busses/i2c-qup.c59
-rw-r--r--drivers/i2c/busses/i2c-rcar.c4
-rw-r--r--drivers/i2c/busses/i2c-riic.c5
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c2
-rw-r--r--drivers/i2c/busses/i2c-robotfuzz-osif.c21
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c2
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c11
-rw-r--r--drivers/i2c/busses/i2c-stm32.c153
-rw-r--r--drivers/i2c/busses/i2c-stm32.h37
-rw-r--r--drivers/i2c/busses/i2c-stm32f7.c1045
-rw-r--r--drivers/i2c/busses/i2c-stu300.c22
-rw-r--r--drivers/i2c/busses/i2c-synquacer.c2
-rw-r--r--drivers/i2c/busses/i2c-tegra.c33
-rw-r--r--drivers/i2c/busses/i2c-xiic.c17
-rw-r--r--drivers/i2c/busses/i2c-xlp9xx.c89
-rw-r--r--drivers/i2c/i2c-core-base.c10
-rw-r--r--drivers/i2c/i2c-core-of.c51
-rw-r--r--drivers/i2c/i2c-core-smbus.c2
-rw-r--r--drivers/i2c/i2c-mux.c2
-rw-r--r--drivers/i2c/muxes/i2c-demux-pinctrl.c5
-rw-r--r--drivers/i2c/muxes/i2c-mux-gpio.c2
-rw-r--r--drivers/i2c/muxes/i2c-mux-ltc4306.c7
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c18
-rw-r--r--drivers/i2c/muxes/i2c-mux-reg.c4
-rw-r--r--drivers/media/platform/marvell-ccic/mmp-driver.c2
-rw-r--r--drivers/mfd/sm501.c2
-rw-r--r--drivers/mfd/timberdale.c4
-rw-r--r--drivers/misc/eeprom/at24.c71
-rw-r--r--include/linux/i2c-pnx.h38
-rw-r--r--include/linux/i2c.h12
-rw-r--r--include/linux/platform_data/i2c-gpio.h (renamed from include/linux/i2c-gpio.h)0
-rw-r--r--include/linux/platform_data/i2c-mux-gpio.h (renamed from include/linux/i2c-mux-gpio.h)0
-rw-r--r--include/linux/platform_data/i2c-ocores.h (renamed from include/linux/i2c-ocores.h)0
-rw-r--r--include/linux/platform_data/i2c-omap.h (renamed from include/linux/i2c-omap.h)0
-rw-r--r--include/linux/platform_data/i2c-pca-platform.h (renamed from include/linux/i2c-pca-platform.h)0
-rw-r--r--include/linux/platform_data/i2c-xiic.h (renamed from include/linux/i2c-xiic.h)0
94 files changed, 1683 insertions, 483 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
index 64e6e656c345..b745f3706120 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -24,7 +24,7 @@ Recommended properties :
- clock-frequency : desired I2C bus clock frequency in Hz.
- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC
registers. PFUNC registers allow to switch I2C pins to function as
- GPIOs, so they can by toggled manually.
+ GPIOs, so they can be toggled manually.
Example (enbw_cmc board):
i2c@1c22000 {
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 4a7811ecd954..7ce8fae55537 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -15,6 +15,7 @@ Required properties:
"renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
"renesas,i2c-r8a77965" if the device is a part of a R8A77965 SoC.
"renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
+ "renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC.
"renesas,i2c-r8a77995" if the device is a part of a R8A77995 SoC.
"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index 89b3250f049b..66ae46d3bc2f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -8,9 +8,7 @@ Required properties:
(b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
(c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
inside HDMIPHY block found on several samsung SoCs
- (d) "samsung, exynos5440-i2c", for s3c2440-like i2c used
- on EXYNOS5440 which does not need GPIO configuration.
- (e) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
+ (d) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
a host to SATA PHY controller on an internal bus.
- reg: physical base address of the controller and length of memory mapped
region.
diff --git a/Documentation/i2c/busses/i2c-mlxcpld b/Documentation/i2c/busses/i2c-mlxcpld
index 4e46c440b38d..925904aa9b57 100644
--- a/Documentation/i2c/busses/i2c-mlxcpld
+++ b/Documentation/i2c/busses/i2c-mlxcpld
@@ -20,6 +20,10 @@ The next transaction types are supported:
- Write Byte/Block.
Registers:
+CPBLTY 0x0 - capability reg.
+ Bits [6:5] - transaction length. b01 - 72B is supported,
+ 36B in other case.
+ Bit 7 - SMBus block read support.
CTRL 0x1 - control reg.
Resets all the registers.
HALF_CYC 0x4 - cycle reg.
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores
index 9e1dfe7553ad..4e713f4cdb2f 100644
--- a/Documentation/i2c/busses/i2c-ocores
+++ b/Documentation/i2c/busses/i2c-ocores
@@ -18,7 +18,7 @@ Usage
i2c-ocores uses the platform bus, so you need to provide a struct
platform_device with the base address and interrupt number. The
dev.platform_data of the device should also point to a struct
-ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
+ocores_i2c_platform_data (see linux/platform_data/i2c-ocores.h) describing the
distance between registers and the input clock speed.
There is also a possibility to attach a list of i2c_board_info which
the i2c-ocores driver will add to the bus upon creation.
diff --git a/Documentation/i2c/muxes/i2c-mux-gpio b/Documentation/i2c/muxes/i2c-mux-gpio
index 7a8d7d261632..893ecdfe6e43 100644
--- a/Documentation/i2c/muxes/i2c-mux-gpio
+++ b/Documentation/i2c/muxes/i2c-mux-gpio
@@ -30,12 +30,12 @@ i2c-mux-gpio uses the platform bus, so you need to provide a struct
platform_device with the platform_data pointing to a struct
i2c_mux_gpio_platform_data with the I2C adapter number of the master
bus, the number of bus segments to create and the GPIO pins used
-to control it. See include/linux/i2c-mux-gpio.h for details.
+to control it. See include/linux/platform_data/i2c-mux-gpio.h for details.
E.G. something like this for a MUX providing 4 bus segments
controlled through 3 GPIO pins:
-#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
#include <linux/platform_device.h>
static const unsigned myboard_gpiomux_gpios[] = {
diff --git a/MAINTAINERS b/MAINTAINERS
index c13b9fb3be0b..cb468a535f32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5953,14 +5953,14 @@ GENERIC GPIO I2C DRIVER
M: Haavard Skinnemoen <hskinnemoen@gmail.com>
S: Supported
F: drivers/i2c/busses/i2c-gpio.c
-F: include/linux/i2c-gpio.h
+F: include/linux/platform_data/i2c-gpio.h
GENERIC GPIO I2C MULTIPLEXER DRIVER
M: Peter Korsgaard <peter.korsgaard@barco.com>
L: linux-i2c@vger.kernel.org
S: Supported
F: drivers/i2c/muxes/i2c-mux-gpio.c
-F: include/linux/i2c-mux-gpio.h
+F: include/linux/platform_data/i2c-mux-gpio.h
F: Documentation/i2c/muxes/i2c-mux-gpio
GENERIC HDLC (WAN) DRIVERS
@@ -10392,7 +10392,7 @@ F: arch/arm/mach-omap1/
F: arch/arm/plat-omap/
F: arch/arm/configs/omap1_defconfig
F: drivers/i2c/busses/i2c-omap.c
-F: include/linux/i2c-omap.h
+F: include/linux/platform_data/i2c-omap.h
OMAP2+ SUPPORT
M: Tony Lindgren <tony@atomide.com>
@@ -10424,7 +10424,7 @@ F: drivers/regulator/tps65218-regulator.c
F: drivers/regulator/tps65910-regulator.c
F: drivers/regulator/twl-regulator.c
F: drivers/regulator/twl6030-regulator.c
-F: include/linux/i2c-omap.h
+F: include/linux/platform_data/i2c-omap.h
ONION OMEGA2+ BOARD
M: Harvey Hunt <harveyhuntnexus@gmail.com>
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 937eb1d47e7b..ef835d82cdb9 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -19,7 +19,7 @@
#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
#include <linux/platform_data/pca953x.h>
#include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 67d46690a56e..da8f3fc3180f 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
#include <linux/htcpld.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index d83ff257eaa8..c6537d2c2859 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -27,7 +27,7 @@
#define __ARCH_ARM_MACH_OMAP1_COMMON_H
#include <linux/mtd/mtd.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <linux/reboot.h>
#include <asm/exception.h>
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 5bdf3c4190f9..9250f263ac51 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -20,7 +20,7 @@
*/
#include <linux/i2c.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <mach/mux.h>
#include "soc.h"
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index dff3750e432f..129455e822e4 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -30,7 +30,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/mfd/twl.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <linux/reboot.h>
#include <linux/irqchip/irq-omap-intc.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index fe66cf247874..d684fac8f592 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -13,7 +13,7 @@
* XXX these should be marked initdata for multi-OMAP kernels
*/
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <linux/omap-dma.h>
#include "omap_hwmod.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 74eefd30518c..abef9f6f9bf5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -13,7 +13,7 @@
* XXX these should be marked initdata for multi-OMAP kernels
*/
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/omap-dma.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 53e1ac3724f2..c9483bc06228 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -14,7 +14,7 @@
* GNU General Public License for more details.
*/
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index d93f9ea4119e..23e6a41a18eb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -15,7 +15,7 @@
* XXX these should be marked initdata for multi-OMAP kernels
*/
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/hsmmc-omap.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 234ee0eec815..a95dbac57a81 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -23,7 +23,7 @@
#include <linux/io.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <linux/omap-dma.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 887a30fa775b..115473d441cd 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -20,7 +20,7 @@
#include <linux/io.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <linux/omap-dma.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index a27c2fed298c..e6c7061a8e73 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -20,7 +20,7 @@
#include <linux/io.h>
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <linux/omap-dma.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 0adb1bd6208e..4d475f6f4a77 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -30,7 +30,7 @@
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
#include <linux/gpio/machine.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 207dcc2e94e7..ab2f89266bbd 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -35,7 +35,7 @@
#include <linux/sched.h>
#include <linux/gpio.h>
#include <linux/jiffies.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
#include <linux/gpio/machine.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/serial_8250.h>
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index f45aed2519ba..406487e76a5c 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -37,7 +37,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
#include "generic.h"
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
index 4e79dbd54a33..fa75d75b5ba9 100644
--- a/arch/mips/alchemy/board-gpr.c
+++ b/arch/mips/alchemy/board-gpr.c
@@ -29,7 +29,7 @@
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
#include <linux/gpio/machine.h>
#include <asm/bootinfo.h>
#include <asm/idle.h>
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index d7d232dea33e..3cba60ff7aab 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -17,7 +17,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/i2c-pca-platform.h>
+#include <linux/platform_data/i2c-pca-platform.h>
#include <linux/i2c-algo-pca.h>
#include <linux/usb/r8a66597.h>
#include <linux/sh_intc.h>
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 3df0efd69ae3..4a34f311e1ff 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -519,9 +519,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
}
}
} else { /* normal 7bit address */
- addr = msg->addr << 1;
- if (flags & I2C_M_RD)
- addr |= 1;
+ addr = i2c_8bit_addr_from_msg(msg);
if (flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
ret = try_address(i2c_adap, addr, retries);
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index e370804ec8bc..883a290f6a4d 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -112,11 +112,8 @@ static int pca_address(struct i2c_algo_pca_data *adap,
struct i2c_msg *msg)
{
int sta = pca_get_con(adap);
- int addr;
+ int addr = i2c_8bit_addr_from_msg(msg);
- addr = ((0x7f & msg->addr) << 1);
- if (msg->flags & I2C_M_RD)
- addr |= 1;
DEB2("=== SLAVE ADDRESS %#04x+%c=%#04x\n",
msg->addr, msg->flags & I2C_M_RD ? 'R' : 'W', addr);
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 270d84bfc2c6..5c29a4d397cf 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -291,13 +291,9 @@ static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
static int pcf_doAddress(struct i2c_algo_pcf_data *adap,
struct i2c_msg *msg)
{
- unsigned short flags = msg->flags;
- unsigned char addr;
+ unsigned char addr = i2c_8bit_addr_from_msg(msg);
- addr = msg->addr << 1;
- if (flags & I2C_M_RD)
- addr |= 1;
- if (flags & I2C_M_REV_DIR_ADDR)
+ if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
i2c_outb(adap, addr);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index fce9f2ca0570..4f8df2ec87b1 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -943,6 +943,7 @@ config I2C_STM32F4
config I2C_STM32F7
tristate "STMicroelectronics STM32F7 I2C support"
depends on ARCH_STM32 || COMPILE_TEST
+ select I2C_SLAVE
help
Enable this option to add support for STM32 I2C controller embedded
in STM32F7 SoCs.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 189e34ba050f..5a869144a0c5 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -94,7 +94,8 @@ obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o
obj-$(CONFIG_I2C_SPRD) += i2c-sprd.o
obj-$(CONFIG_I2C_ST) += i2c-st.o
obj-$(CONFIG_I2C_STM32F4) += i2c-stm32f4.o
-obj-$(CONFIG_I2C_STM32F7) += i2c-stm32f7.o
+i2c-stm32f7-drv-objs := i2c-stm32f7.o i2c-stm32.o
+obj-$(CONFIG_I2C_STM32F7) += i2c-stm32f7-drv.o
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
obj-$(CONFIG_I2C_SUN6I_P2WI) += i2c-sun6i-p2wi.o
obj-$(CONFIG_I2C_SYNQUACER) += i2c-synquacer.o
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 7d4aeb4465b3..60e4d0e939a3 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -335,13 +335,12 @@ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
{
u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
- u8 slave_addr = msg->addr << 1;
+ u8 slave_addr = i2c_8bit_addr_from_msg(msg);
bus->master_state = ASPEED_I2C_MASTER_START;
bus->buf_index = 0;
if (msg->flags & I2C_M_RD) {
- slave_addr |= 1;
command |= ASPEED_I2CD_M_RX_CMD;
/* Need to let the hardware know to NACK after RX. */
if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index bfd1fdff64a9..3f3e8b3bf5ff 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -518,8 +518,16 @@ static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
* the RXRDY interrupt first in order to not keep garbage data in the
* Receive Holding Register for the next transfer.
*/
- if (irqstatus & AT91_TWI_RXRDY)
- at91_twi_read_next_byte(dev);
+ if (irqstatus & AT91_TWI_RXRDY) {
+ /*
+ * Read all available bytes at once by polling RXRDY usable w/
+ * and w/o FIFO. With FIFO enabled we could also read RXFL and
+ * avoid polling RXRDY.
+ */
+ do {
+ at91_twi_read_next_byte(dev);
+ } while (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY);
+ }
/*
* When a NACK condition is detected, the I2C controller sets the NACK,
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 13f07482ec68..8e60048a33f8 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -351,13 +351,15 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
* addr_2: addr[7:0]
*/
addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06);
+ if (i2c_m_rd(msg))
+ addr_1 |= 1; /* Set the R/nW bit of the address */
addr_2 = msg->addr & 0xFF;
} else {
/* 7-bit address
* addr_1: addr[6:0] | (R/nW)
* addr_2: dont care
*/
- addr_1 = (msg->addr << 1) & 0xFF;
+ addr_1 = i2c_8bit_addr_from_msg(msg);
addr_2 = 0;
}
@@ -365,7 +367,6 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
/* I2C read transfer */
rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len;
tx_xfer = 0;
- addr_1 |= 1; /* Set the R/nW bit of the address */
} else {
/* I2C write transfer */
rx_xfer = 0;
@@ -532,23 +533,23 @@ static int axxia_i2c_probe(struct platform_device *pdev)
if (idev->bus_clk_rate == 0)
idev->bus_clk_rate = 100000; /* default clock rate */
+ ret = clk_prepare_enable(idev->i2c_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ return ret;
+ }
+
ret = axxia_i2c_init(idev);
if (ret) {
dev_err(&pdev->dev, "failed to initialize\n");
- return ret;
+ goto error_disable_clk;
}
ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0,
pdev->name, idev);
if (ret) {
dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq);
- return ret;
- }
-
- ret = clk_prepare_enable(idev->i2c_clk);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable clock\n");
- return ret;
+ goto error_disable_clk;
}
i2c_set_adapdata(&idev->adapter, idev);
@@ -563,12 +564,14 @@ static int axxia_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, idev);
ret = i2c_add_adapter(&idev->adapter);
- if (ret) {
- clk_disable_unprepare(idev->i2c_clk);
- return ret;
- }
+ if (ret)
+ goto error_disable_clk;
return 0;
+
+error_disable_clk:
+ clk_disable_unprepare(idev->i2c_clk);
+ return ret;
}
static int axxia_i2c_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 27ebd90de43b..48914dfc8ce8 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -149,18 +149,17 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
}
-void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
-{
- dw_writel(dev, enable, DW_IC_ENABLE);
-}
-
-void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
+void __i2c_dw_disable(struct dw_i2c_dev *dev)
{
int timeout = 100;
do {
- __i2c_dw_enable(dev, enable);
- if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
+ __i2c_dw_disable_nowait(dev);
+ /*
+ * The enable status register may be unimplemented, but
+ * in that case this test reads zero and exits the loop.
+ */
+ if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == 0)
return;
/*
@@ -171,8 +170,7 @@ void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
usleep_range(25, 250);
} while (timeout--);
- dev_warn(dev->dev, "timeout in %sabling adapter\n",
- enable ? "en" : "dis");
+ dev_warn(dev->dev, "timeout in disabling adapter\n");
}
unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
@@ -277,7 +275,7 @@ u32 i2c_dw_func(struct i2c_adapter *adap)
void i2c_dw_disable(struct dw_i2c_dev *dev)
{
/* Disable controller */
- __i2c_dw_enable_and_wait(dev, false);
+ __i2c_dw_disable(dev);
/* Disable all interupts */
dw_writel(dev, 0, DW_IC_INTR_MASK);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 8707c76b2fee..d690e648bc01 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -297,8 +297,6 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset);
void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
-void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable);
-void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable);
unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare);
int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
@@ -309,6 +307,18 @@ u32 i2c_dw_func(struct i2c_adapter *adap);
void i2c_dw_disable(struct dw_i2c_dev *dev);
void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
+{
+ dw_writel(dev, 1, DW_IC_ENABLE);
+}
+
+static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
+{
+ dw_writel(dev, 0, DW_IC_ENABLE);
+}
+
+void __i2c_dw_disable(struct dw_i2c_dev *dev);
+
extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
extern int i2c_dw_probe(struct dw_i2c_dev *dev);
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 0cdba29ae0a9..27436a937492 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -81,7 +81,7 @@ static int i2c_dw_init_master(struct dw_i2c_dev *dev)
comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
/* Disable the adapter */
- __i2c_dw_enable_and_wait(dev, false);
+ __i2c_dw_disable(dev);
/* Set standard and fast speed deviders for high/low periods */
@@ -180,7 +180,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
u32 ic_con, ic_tar = 0;
/* Disable the adapter */
- __i2c_dw_enable_and_wait(dev, false);
+ __i2c_dw_disable(dev);
/* If the slave address is ten bit address, enable 10BITADDR */
ic_con = dw_readl(dev, DW_IC_CON);
@@ -209,7 +209,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
i2c_dw_disable_int(dev);
/* Enable the adapter */
- __i2c_dw_enable(dev, true);
+ __i2c_dw_enable(dev);
/* Dummy read to avoid the register getting stuck on Bay Trail */
dw_readl(dev, DW_IC_ENABLE_STATUS);
@@ -462,7 +462,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
* additional interrupts are a hardware bug or this driver doesn't
* handle them correctly yet.
*/
- __i2c_dw_enable(dev, false);
+ __i2c_dw_disable_nowait(dev);
if (dev->msg_err) {
ret = dev->msg_err;
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index d42558d1b002..8ce2cd368477 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -75,7 +75,7 @@ static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
/* Disable the adapter. */
- __i2c_dw_enable_and_wait(dev, false);
+ __i2c_dw_disable(dev);
/* Configure SDA Hold Time if required. */
reg = dw_readl(dev, DW_IC_COMP_VERSION);
@@ -119,11 +119,11 @@ static int i2c_dw_reg_slave(struct i2c_client *slave)
* Set slave address in the IC_SAR register,
* the address to which the DW_apb_i2c responds.
*/
- __i2c_dw_enable(dev, false);
+ __i2c_dw_disable_nowait(dev);
dw_writel(dev, slave->addr, DW_IC_SAR);
dev->slave = slave;
- __i2c_dw_enable(dev, true);
+ __i2c_dw_enable(dev);
dev->cmd_err = 0;
dev->msg_write_idx = 0;
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index f718ee4e3332..3f28317cde39 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -360,11 +360,11 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
if (ret < 0)
goto abort;
}
+ ret = diolan_i2c_put_byte_ack(dev,
+ i2c_8bit_addr_from_msg(pmsg));
+ if (ret < 0)
+ goto abort;
if (pmsg->flags & I2C_M_RD) {
- ret =
- diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1);
- if (ret < 0)
- goto abort;
for (j = 0; j < pmsg->len; j++) {
u8 byte;
bool ack = j < pmsg->len - 1;
@@ -393,9 +393,6 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
pmsg->buf[j] = byte;
}
} else {
- ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1);
- if (ret < 0)
- goto abort;
for (j = 0; j < pmsg->len; j++) {
ret = diolan_i2c_put_byte_ack(dev,
pmsg->buf[j]);
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index aa336ba89aa3..5f2bab878b2c 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -144,8 +144,7 @@ static void efm32_i2c_send_next_msg(struct efm32_i2c_ddata *ddata)
struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
efm32_i2c_write32(ddata, REG_CMD, REG_CMD_START);
- efm32_i2c_write32(ddata, REG_TXDATA, cur_msg->addr << 1 |
- (cur_msg->flags & I2C_M_RD ? 1 : 0));
+ efm32_i2c_write32(ddata, REG_TXDATA, i2c_8bit_addr_from_msg(cur_msg));
}
static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata)
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index bdeab0174fec..835d54ac2971 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -414,7 +414,7 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
iowrite32(addr_8_lsb, p + PCH_I2CDR);
} else {
/* set 7 bit slave address and R/W bit as 0 */
- iowrite32(addr << 1, p + PCH_I2CDR);
+ iowrite32(i2c_8bit_addr_from_msg(msgs), p + PCH_I2CDR);
if (first)
pch_i2c_start(adap);
}
@@ -538,8 +538,7 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
} else {
/* 7 address bits + R/W bit */
- addr = (((addr) << 1) | (I2C_RD));
- iowrite32(addr, p + PCH_I2CDR);
+ iowrite32(i2c_8bit_addr_from_msg(msgs), p + PCH_I2CDR);
}
/* check if it is the first message */
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index d2e84480fbe9..ba9b6ea48a31 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -149,7 +149,7 @@ static int __em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
em_clear_set_bit(priv, 0, I2C_BIT_STT0, I2C_OFS_IICC0);
/* Send slave address and R/W type */
- writeb((msg->addr << 1) | read, priv->base + I2C_OFS_IIC0);
+ writeb(i2c_8bit_addr_from_msg(msg), priv->base + I2C_OFS_IIC0);
/* Wait for transaction */
status = em_i2c_wait_for_event(priv);
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 12ec8484e653..de82ad8ff534 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -707,7 +707,7 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
struct exynos5_i2c *i2c = adap->algo_data;
- int i = 0, ret = 0, stop = 0;
+ int i, ret;
if (i2c->suspended) {
dev_err(i2c->dev, "HS-I2C is not initialized.\n");
@@ -718,30 +718,15 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap,
if (ret)
return ret;
- for (i = 0; i < num; i++, msgs++) {
- stop = (i == num - 1);
-
- ret = exynos5_i2c_xfer_msg(i2c, msgs, stop);
-
- if (ret < 0)
- goto out;
- }
-
- if (i == num) {
- ret = num;
- } else {
- /* Only one message, cannot access the device */
- if (i == 1)
- ret = -EREMOTEIO;
- else
- ret = i;
-
- dev_warn(i2c->dev, "xfer message failed\n");
+ for (i = 0; i < num; ++i) {
+ ret = exynos5_i2c_xfer_msg(i2c, msgs + i, i + 1 == num);
+ if (ret)
+ break;
}
- out:
clk_disable(i2c->clk);
- return ret;
+
+ return ret ?: num;
}
static u32 exynos5_i2c_func(struct i2c_adapter *adap)
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 58abb3eced58..005e6e0330c2 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -11,7 +11,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index bb68957d3da5..061a4bfb03f4 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -73,7 +73,6 @@
#define I2C_OVER_INTR BIT(0)
#define HIX5I2C_MAX_FREQ 400000 /* 400k */
-#define HIX5I2C_READ_OPERATION 0x01
enum hix5hd2_i2c_state {
HIX5I2C_STAT_RW_ERR = -1,
@@ -311,12 +310,8 @@ static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop)
hix5hd2_i2c_clr_all_irq(priv);
hix5hd2_i2c_enable_irq(priv);
- if (priv->msg->flags & I2C_M_RD)
- writel_relaxed((priv->msg->addr << 1) | HIX5I2C_READ_OPERATION,
- priv->regs + HIX5I2C_TXR);
- else
- writel_relaxed(priv->msg->addr << 1,
- priv->regs + HIX5I2C_TXR);
+ writel_relaxed(i2c_8bit_addr_from_msg(priv->msg),
+ priv->regs + HIX5I2C_TXR);
writel_relaxed(I2C_WRITE | I2C_START, priv->regs + HIX5I2C_COM);
spin_unlock_irqrestore(&priv->lock, flags);
@@ -377,17 +372,7 @@ static int hix5hd2_i2c_xfer(struct i2c_adapter *adap,
goto out;
}
- if (i == num) {
- ret = num;
- } else {
- /* Only one message, cannot access the device */
- if (i == 1)
- ret = -EREMOTEIO;
- else
- ret = i;
-
- dev_warn(priv->dev, "xfer message failed\n");
- }
+ ret = num;
out:
pm_runtime_mark_last_busy(priv->dev);
@@ -471,7 +456,6 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
goto err_clk;
}
- pm_suspend_ignore_children(&pdev->dev, true);
pm_runtime_set_autosuspend_delay(priv->dev, MSEC_PER_SEC);
pm_runtime_use_autosuspend(priv->dev);
pm_runtime_set_active(priv->dev);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index e0d59e9ff3c6..aa726607645e 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -106,7 +106,7 @@
#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
#include <linux/gpio.h>
-#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
#endif
/* I801 SMBus address offsets */
@@ -1710,7 +1710,7 @@ static void i801_shutdown(struct pci_dev *dev)
pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int i801_suspend(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -1731,8 +1731,7 @@ static int i801_resume(struct device *dev)
}
#endif
-static UNIVERSAL_DEV_PM_OPS(i801_pm_ops, i801_suspend,
- i801_resume, NULL);
+static SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume);
static struct pci_driver i801_driver = {
.name = "i801_smbus",
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 961c5f42d956..6f6e1dfe7cce 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -561,9 +561,6 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num);
- if (!num)
- return 0;
-
/* Check the sanity of the passed messages.
* Uhh, generic i2c layer is more suitable place for such code...
*/
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index e6da2c7a9a3e..6d975f5221ca 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -1,18 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* This is i.MX low power i2c controller driver.
*
* Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/clk.h>
@@ -180,15 +170,13 @@ static int lpi2c_imx_start(struct lpi2c_imx_struct *lpi2c_imx,
struct i2c_msg *msgs)
{
unsigned int temp;
- u8 read;
temp = readl(lpi2c_imx->base + LPI2C_MCR);
temp |= MCR_RRF | MCR_RTF;
writel(temp, lpi2c_imx->base + LPI2C_MCR);
writel(0x7f00, lpi2c_imx->base + LPI2C_MSR);
- read = msgs->flags & I2C_M_RD;
- temp = (msgs->addr << 1 | read) | (GEN_START << 8);
+ temp = i2c_8bit_addr_from_msg(msgs) | (GEN_START << 8);
writel(temp, lpi2c_imx->base + LPI2C_MTDR);
return lpi2c_imx_bus_busy(lpi2c_imx);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index d7267dd9c7bf..0207e194f84b 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2002 Motorola GSG-China
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
* Author:
* Darius Augulis, Teltonika Inc.
*
@@ -630,7 +621,7 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
* Write slave address.
* The first byte must be transmitted by the CPU.
*/
- imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+ imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
reinit_completion(&i2c_imx->dma->cmd_complete);
time_left = wait_for_completion_timeout(
&i2c_imx->dma->cmd_complete,
@@ -760,10 +751,10 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
int i, result;
dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n",
- __func__, msgs->addr << 1);
+ __func__, i2c_8bit_addr_from_msg(msgs));
/* write slave address */
- imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+ imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
result = i2c_imx_trx_complete(i2c_imx);
if (result)
return result;
@@ -796,10 +787,10 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
dev_dbg(&i2c_imx->adapter.dev,
"<%s> write slave address: addr=0x%x\n",
- __func__, (msgs->addr << 1) | 0x01);
+ __func__, i2c_8bit_addr_from_msg(msgs));
/* write slave address */
- imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR);
+ imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
result = i2c_imx_trx_complete(i2c_imx);
if (result)
return result;
diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c
index e879190b5d1d..1c874aaa0447 100644
--- a/drivers/i2c/busses/i2c-kempld.c
+++ b/drivers/i2c/busses/i2c-kempld.c
@@ -124,15 +124,14 @@ static int kempld_i2c_process(struct kempld_i2c_data *i2c)
/* 10 bit address? */
if (i2c->msg->flags & I2C_M_TEN) {
addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6);
+ /* Set read bit if necessary */
+ addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
i2c->state = STATE_ADDR10;
} else {
- addr = (i2c->msg->addr << 1);
+ addr = i2c_8bit_addr_from_msg(i2c->msg);
i2c->state = STATE_START;
}
- /* Set read bit if necessary */
- addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
-
kempld_write8(pld, KEMPLD_I2C_DATA, addr);
kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START);
diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index 4c28fa28ce76..745ed43a22d6 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -45,13 +45,16 @@
#define MLXCPLD_I2C_VALID_FLAG (I2C_M_RECV_LEN | I2C_M_RD)
#define MLXCPLD_I2C_BUS_NUM 1
#define MLXCPLD_I2C_DATA_REG_SZ 36
+#define MLXCPLD_I2C_DATA_SZ_BIT BIT(5)
+#define MLXCPLD_I2C_DATA_SZ_MASK GENMASK(6, 5)
+#define MLXCPLD_I2C_SMBUS_BLK_BIT BIT(7)
#define MLXCPLD_I2C_MAX_ADDR_LEN 4
#define MLXCPLD_I2C_RETR_NUM 2
#define MLXCPLD_I2C_XFER_TO 500000 /* usec */
#define MLXCPLD_I2C_POLL_TIME 2000 /* usec */
/* LPC I2C registers */
-#define MLXCPLD_LPCI2C_LPF_REG 0x0
+#define MLXCPLD_LPCI2C_CPBLTY_REG 0x0
#define MLXCPLD_LPCI2C_CTRL_REG 0x1
#define MLXCPLD_LPCI2C_HALF_CYC_REG 0x4
#define MLXCPLD_LPCI2C_I2C_HOLD_REG 0x5
@@ -83,6 +86,7 @@ struct mlxcpld_i2c_priv {
struct mutex lock;
struct mlxcpld_i2c_curr_xfer xfer;
struct device *dev;
+ bool smbus_block;
};
static void mlxcpld_i2c_lpc_write_buf(u8 *data, u8 len, u32 addr)
@@ -230,7 +234,7 @@ static void mlxcpld_i2c_set_transf_data(struct mlxcpld_i2c_priv *priv,
* All upper layers currently are never use transfer with more than
* 2 messages. Actually, it's also not so relevant in Mellanox systems
* because of HW limitation. Max size of transfer is not more than 32
- * bytes in the current x86 LPCI2C bridge.
+ * or 68 bytes in the current x86 LPCI2C bridge.
*/
priv->xfer.cmd = msgs[num - 1].flags & I2C_M_RD;
@@ -295,7 +299,7 @@ static int mlxcpld_i2c_wait_for_free(struct mlxcpld_i2c_priv *priv)
static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
{
int status, i, timeout = 0;
- u8 datalen;
+ u8 datalen, val;
do {
usleep_range(MLXCPLD_I2C_POLL_TIME / 2, MLXCPLD_I2C_POLL_TIME);
@@ -324,9 +328,22 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
* Actual read data len will be always the same as
* requested len. 0xff (line pull-up) will be returned
* if slave has no data to return. Thus don't read
- * MLXCPLD_LPCI2C_NUM_DAT_REG reg from CPLD.
+ * MLXCPLD_LPCI2C_NUM_DAT_REG reg from CPLD. Only in case of
+ * SMBus block read transaction data len can be different,
+ * check this case.
*/
- datalen = priv->xfer.data_len;
+ mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_ADDR_REG, &val,
+ 1);
+ if (priv->smbus_block && (val & MLXCPLD_I2C_SMBUS_BLK_BIT)) {
+ mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG,
+ &datalen, 1);
+ if (unlikely(datalen > (I2C_SMBUS_BLOCK_MAX + 1))) {
+ dev_err(priv->dev, "Incorrect smbus block read message len\n");
+ return -E2BIG;
+ }
+ } else {
+ datalen = priv->xfer.data_len;
+ }
mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_DATA_REG,
priv->xfer.msg[i].buf, datalen);
@@ -344,12 +361,20 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
static void mlxcpld_i2c_xfer_msg(struct mlxcpld_i2c_priv *priv)
{
int i, len = 0;
- u8 cmd;
+ u8 cmd, val;
mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG,
&priv->xfer.data_len, 1);
- mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_ADDR_REG,
- &priv->xfer.addr_width, 1);
+
+ val = priv->xfer.addr_width;
+ /* Notify HW about SMBus block read transaction */
+ if (priv->smbus_block && priv->xfer.msg_num >= 2 &&
+ priv->xfer.msg[1].len == 1 &&
+ (priv->xfer.msg[1].flags & I2C_M_RECV_LEN) &&
+ (priv->xfer.msg[1].flags & I2C_M_RD))
+ val |= MLXCPLD_I2C_SMBUS_BLK_BIT;
+
+ mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_ADDR_REG, &val, 1);
for (i = 0; i < priv->xfer.msg_num; i++) {
if ((priv->xfer.msg[i].flags & I2C_M_RD) != I2C_M_RD) {
@@ -425,7 +450,14 @@ static int mlxcpld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
static u32 mlxcpld_i2c_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+ struct mlxcpld_i2c_priv *priv = i2c_get_adapdata(adap);
+
+ if (priv->smbus_block)
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_BLOCK_DATA;
+ else
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
}
static const struct i2c_algorithm mlxcpld_i2c_algo = {
@@ -440,6 +472,13 @@ static const struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
.max_comb_1st_msg_len = 4,
};
+static const struct i2c_adapter_quirks mlxcpld_i2c_quirks_ext = {
+ .flags = I2C_AQ_COMB_WRITE_THEN_READ,
+ .max_read_len = MLXCPLD_I2C_DATA_REG_SZ * 2 - MLXCPLD_I2C_MAX_ADDR_LEN,
+ .max_write_len = MLXCPLD_I2C_DATA_REG_SZ * 2,
+ .max_comb_1st_msg_len = 4,
+};
+
static struct i2c_adapter mlxcpld_i2c_adapter = {
.owner = THIS_MODULE,
.name = "i2c-mlxcpld",
@@ -454,6 +493,7 @@ static int mlxcpld_i2c_probe(struct platform_device *pdev)
{
struct mlxcpld_i2c_priv *priv;
int err;
+ u8 val;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -466,6 +506,16 @@ static int mlxcpld_i2c_probe(struct platform_device *pdev)
/* Register with i2c layer */
mlxcpld_i2c_adapter.timeout = usecs_to_jiffies(MLXCPLD_I2C_XFER_TO);
+ /* Read capability register */
+ mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_CPBLTY_REG, &val, 1);
+ /* Check support for extended transaction length */
+ if ((val & MLXCPLD_I2C_DATA_SZ_MASK) == MLXCPLD_I2C_DATA_SZ_BIT)
+ mlxcpld_i2c_adapter.quirks = &mlxcpld_i2c_quirks_ext;
+ /* Check support for smbus block transaction */
+ if (val & MLXCPLD_I2C_SMBUS_BLK_BIT)
+ priv->smbus_block = true;
+ if (pdev->id >= -1)
+ mlxcpld_i2c_adapter.nr = pdev->id;
priv->adap = mlxcpld_i2c_adapter;
priv->adap.dev.parent = &pdev->dev;
priv->base_addr = MLXPLAT_CPLD_LPC_I2C_BASE_ADDR;
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index cf23a746cc17..1e57f58fcb00 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -27,6 +27,7 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
@@ -734,7 +735,6 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
static int mtk_i2c_probe(struct platform_device *pdev)
{
- const struct of_device_id *of_id;
int ret = 0;
struct mtk_i2c *i2c;
struct clk *clk;
@@ -761,11 +761,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
init_completion(&i2c->msg_complete);
- of_id = of_match_node(mtk_i2c_of_match, pdev->dev.of_node);
- if (!of_id)
- return -EINVAL;
-
- i2c->dev_comp = of_id->data;
+ i2c->dev_comp = of_device_get_match_data(&pdev->dev);
i2c->adap.dev.of_node = pdev->dev.of_node;
i2c->dev = &pdev->dev;
i2c->adap.dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index e617bd600794..642c58946d8d 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Freescale MXS I2C bus driver
*
@@ -7,12 +8,6 @@
* based on a (non-working) driver which was:
*
* Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
*/
#include <linux/slab.h>
@@ -180,9 +175,10 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
struct dma_async_tx_descriptor *desc;
struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
+ i2c->addr_data = i2c_8bit_addr_from_msg(msg);
+
if (msg->flags & I2C_M_RD) {
i2c->dma_read = true;
- i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ;
/*
* SELECT command.
@@ -240,7 +236,6 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
}
} else {
i2c->dma_read = false;
- i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE;
/*
* WRITE command.
@@ -371,7 +366,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
struct i2c_msg *msg, uint32_t flags)
{
struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
- uint32_t addr_data = msg->addr << 1;
+ uint32_t addr_data = i2c_8bit_addr_from_msg(msg);
uint32_t data = 0;
int i, ret, xlen = 0, xmit = 0;
uint32_t start;
@@ -411,8 +406,6 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
*/
BUG_ON(msg->len > 4);
- addr_data |= I2C_SMBUS_READ;
-
/* SELECT command. */
mxs_i2c_pio_trigger_write_cmd(i2c, MXS_CMD_I2C_SELECT,
addr_data);
@@ -450,7 +443,6 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
* fast enough. It is possible to transfer arbitrary amount
* of data using PIO write.
*/
- addr_data |= I2C_SMBUS_WRITE;
/*
* The LSB of data buffer is the first byte blasted across
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 49c7c0c91486..0ed5a41804dc 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1012,8 +1012,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
goto err_no_mem;
}
- pm_suspend_ignore_children(&adev->dev, true);
-
dev->clk = devm_clk_get(&adev->dev, NULL);
if (IS_ERR(dev->clk)) {
dev_err(&adev->dev, "could not get i2c clock\n");
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 45ae3c025bf6..88444ef74943 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -21,7 +21,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
-#include <linux/i2c-ocores.h>
+#include <linux/platform_data/i2c-ocores.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/log2.h>
@@ -222,10 +222,7 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
i2c->nmsgs = num;
i2c->state = STATE_START;
- oc_setreg(i2c, OCI2C_DATA,
- (i2c->msg->addr << 1) |
- ((i2c->msg->flags & I2C_M_RD) ? 1:0));
-
+ oc_setreg(i2c, OCI2C_DATA, i2c_8bit_addr_from_msg(i2c->msg));
oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b9172f08fd05..65d06a819307 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -36,7 +36,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/slab.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
#include <linux/pm_runtime.h>
#include <linux/pinctrl/consumer.h>
diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
index 0aabb7eca0c5..dc2a23f4fb52 100644
--- a/drivers/i2c/busses/i2c-opal.c
+++ b/drivers/i2c/busses/i2c-opal.c
@@ -94,8 +94,6 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
*/
memset(&req, 0, sizeof(req));
switch(num) {
- case 0:
- return 0;
case 1:
req.type = (msgs[0].flags & I2C_M_RD) ?
OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
@@ -114,8 +112,6 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
req.size = cpu_to_be32(msgs[1].len);
req.buffer_ra = cpu_to_be64(__pa(msgs[1].buf));
break;
- default:
- return -EOPNOTSUPP;
}
rc = i2c_opal_send_request(opal_id, &req);
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index df1dbc92a024..55fd5c6f3cca 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -121,7 +121,7 @@ static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter,
read = msg->flags & I2C_M_RD ? 1 : 0;
- TXFIFO_WR(smbus, MTXFIFO_START | (msg->addr << 1) | read);
+ TXFIFO_WR(smbus, MTXFIFO_START | i2c_8bit_addr_from_msg(msg));
if (read) {
TXFIFO_WR(smbus, msg->len | MTXFIFO_READ |
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index bc2707ffd409..de3fe6e828cb 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -20,7 +20,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/i2c-algo-pca.h>
-#include <linux/i2c-pca-platform.h>
+#include <linux/platform_data/i2c-pca-platform.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index a542041df0cd..6e0e546ef83f 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -18,7 +18,6 @@
#include <linux/timer.h>
#include <linux/completion.h>
#include <linux/platform_device.h>
-#include <linux/i2c-pnx.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/clk.h>
@@ -29,6 +28,26 @@
#define I2C_PNX_SPEED_KHZ_DEFAULT 100
#define I2C_PNX_REGION_SIZE 0x100
+struct i2c_pnx_mif {
+ int ret; /* Return value */
+ int mode; /* Interface mode */
+ struct completion complete; /* I/O completion */
+ struct timer_list timer; /* Timeout */
+ u8 * buf; /* Data buffer */
+ int len; /* Length of data buffer */
+ int order; /* RX Bytes to order via TX */
+};
+
+struct i2c_pnx_algo_data {
+ void __iomem *ioaddr;
+ struct i2c_pnx_mif mif;
+ int last;
+ struct clk *clk;
+ struct i2c_adapter adapter;
+ int irq;
+ u32 timeout;
+};
+
enum {
mstatus_tdi = 0x00000001,
mstatus_afi = 0x00000002,
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index ebbf9cdec86b..c86c3ae1318f 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -136,8 +136,13 @@
*/
#define TOUT_MIN 2
+/* I2C Frequency Modes */
+#define I2C_STANDARD_FREQ 100000
+#define I2C_FAST_MODE_FREQ 400000
+#define I2C_FAST_MODE_PLUS_FREQ 1000000
+
/* Default values. Use these if FW query fails */
-#define DEFAULT_CLK_FREQ 100000
+#define DEFAULT_CLK_FREQ I2C_STANDARD_FREQ
#define DEFAULT_SRC_CLK 20000000
/*
@@ -150,6 +155,10 @@
/* TAG length for DATA READ in RX FIFO */
#define READ_RX_TAGS_LEN 2
+static unsigned int scl_freq;
+module_param_named(scl_freq, scl_freq, uint, 0444);
+MODULE_PARM_DESC(scl_freq, "SCL frequency override");
+
/*
* count: no of blocks
* pos: current block number
@@ -453,7 +462,7 @@ static void qup_i2c_write_tx_fifo_v1(struct qup_i2c_dev *qup)
{
struct qup_i2c_block *blk = &qup->blk;
struct i2c_msg *msg = qup->msg;
- u32 addr = msg->addr << 1;
+ u32 addr = i2c_8bit_addr_from_msg(msg);
u32 qup_tag;
int idx;
u32 val;
@@ -1648,6 +1657,12 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
clk_disable_unprepare(qup->pclk);
}
+static const struct acpi_device_id qup_i2c_acpi_match[] = {
+ { "QCOM8010"},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
+
static int qup_i2c_probe(struct platform_device *pdev)
{
static const int blk_sizes[] = {4, 16, 32};
@@ -1669,10 +1684,15 @@ static int qup_i2c_probe(struct platform_device *pdev)
init_completion(&qup->xfer);
platform_set_drvdata(pdev, qup);
- ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
- if (ret) {
- dev_notice(qup->dev, "using default clock-frequency %d",
- DEFAULT_CLK_FREQ);
+ if (scl_freq) {
+ dev_notice(qup->dev, "Using override frequency of %u\n", scl_freq);
+ clk_freq = scl_freq;
+ } else {
+ ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
+ if (ret) {
+ dev_notice(qup->dev, "using default clock-frequency %d",
+ DEFAULT_CLK_FREQ);
+ }
}
if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
@@ -1682,7 +1702,10 @@ static int qup_i2c_probe(struct platform_device *pdev)
} else {
qup->adap.algo = &qup_i2c_algo_v2;
is_qup_v1 = false;
- ret = qup_i2c_req_dma(qup);
+ if (acpi_match_device(qup_i2c_acpi_match, qup->dev))
+ goto nodma;
+ else
+ ret = qup_i2c_req_dma(qup);
if (ret == -EPROBE_DEFER)
goto fail_dma;
@@ -1734,8 +1757,8 @@ static int qup_i2c_probe(struct platform_device *pdev)
}
nodma:
- /* We support frequencies up to FAST Mode (400KHz) */
- if (!clk_freq || clk_freq > 400000) {
+ /* We support frequencies up to FAST Mode Plus (1MHz) */
+ if (!clk_freq || clk_freq > I2C_FAST_MODE_PLUS_FREQ) {
dev_err(qup->dev, "clock frequency not supported %d\n",
clk_freq);
return -EINVAL;
@@ -1839,9 +1862,15 @@ nodma:
size = QUP_INPUT_FIFO_SIZE(io_mode);
qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
- fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
hs_div = 3;
- qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
+ if (clk_freq <= I2C_STANDARD_FREQ) {
+ fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
+ qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
+ } else {
+ /* 33%/66% duty cycle */
+ fs_div = ((src_clk_freq / clk_freq) - 6) * 2 / 3;
+ qup->clk_ctl = ((fs_div / 2) << 16) | (hs_div << 8) | (fs_div & 0xff);
+ }
/*
* Time it takes for a byte to be clocked out on the bus.
@@ -1959,14 +1988,6 @@ static const struct of_device_id qup_i2c_dt_match[] = {
};
MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
-#if IS_ENABLED(CONFIG_ACPI)
-static const struct acpi_device_id qup_i2c_acpi_match[] = {
- { "QCOM8010"},
- { },
-};
-MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
-#endif
-
static struct platform_driver qup_i2c_driver = {
.probe = qup_i2c_probe,
.remove = qup_i2c_remove,
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index c6915b835396..5e310efd9446 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -329,7 +329,7 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
if (priv->msgs_left == 1)
priv->flags |= ID_LAST_MSG;
- rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read);
+ rcar_i2c_write(priv, ICMAR, i2c_8bit_addr_from_msg(priv->msg));
/*
* We don't have a test case but the HW engineers say that the write order
* of ICMSR and ICMCR depends on whether we issue START or REP_START. Since
@@ -542,6 +542,8 @@ static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
* If next received data is the _LAST_, go to STOP phase. Might be
* overwritten by REP START when setting up a new msg. Not elegant
* but the only stable sequence for REP START I have found so far.
+ * If you want to change this code, make sure sending one transfer with
+ * four messages (WR-RD-WR-RD) works!
*/
if (priv->pos + 1 >= msg->len)
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index 95c2f1ce3cad..5f1fca7880b1 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -167,15 +167,14 @@ static irqreturn_t riic_tdre_isr(int irq, void *data)
return IRQ_NONE;
if (riic->bytes_left == RIIC_INIT_MSG) {
- val = !!(riic->msg->flags & I2C_M_RD);
- if (val)
+ if (riic->msg->flags & I2C_M_RD)
/* On read, switch over to receive interrupt */
riic_clear_set_bit(riic, ICIER_TIE, ICIER_RIE, RIIC_ICIER);
else
/* On write, initialize length */
riic->bytes_left = riic->msg->len;
- val |= (riic->msg->addr << 1);
+ val = i2c_8bit_addr_from_msg(riic->msg);
} else {
val = *riic->buf;
riic->buf++;
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index e1a18d989f83..b8a2728dd4b6 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1326,8 +1326,6 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
if (ret < 0)
goto err_clk_notifier;
- dev_info(&pdev->dev, "Initialized RK3xxx I2C bus at %p\n", i2c->regs);
-
return 0;
err_clk_notifier:
diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
index 9c0f52b7ff7e..d848cf515234 100644
--- a/drivers/i2c/busses/i2c-robotfuzz-osif.c
+++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
@@ -62,27 +62,24 @@ static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
{
struct osif_priv *priv = adapter->algo_data;
struct i2c_msg *pmsg;
- int ret = 0;
- int i, cmd;
+ int ret;
+ int i;
- for (i = 0; ret >= 0 && i < num; i++) {
+ for (i = 0; i < num; i++) {
pmsg = &msgs[i];
if (pmsg->flags & I2C_M_RD) {
- cmd = OSIFI2C_READ;
-
- ret = osif_usb_read(adapter, cmd, pmsg->flags,
- pmsg->addr, pmsg->buf,
- pmsg->len);
+ ret = osif_usb_read(adapter, OSIFI2C_READ,
+ pmsg->flags, pmsg->addr,
+ pmsg->buf, pmsg->len);
if (ret != pmsg->len) {
dev_err(&adapter->dev, "failure reading data\n");
return -EREMOTEIO;
}
} else {
- cmd = OSIFI2C_WRITE;
-
- ret = osif_usb_write(adapter, cmd, pmsg->flags,
- pmsg->addr, pmsg->buf, pmsg->len);
+ ret = osif_usb_write(adapter, OSIFI2C_WRITE,
+ pmsg->flags, pmsg->addr,
+ pmsg->buf, pmsg->len);
if (ret != pmsg->len) {
dev_err(&adapter->dev, "failure writing data\n");
return -EREMOTEIO;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5d97510ee48b..9fe2b6951895 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -154,8 +154,6 @@ static const struct of_device_id s3c24xx_i2c_match[] = {
{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
.data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
- { .compatible = "samsung,exynos5440-i2c",
- .data = (void *)(QUIRK_S3C2440 | QUIRK_NO_GPIO) },
{ .compatible = "samsung,exynos5-sata-phy-i2c",
.data = (void *)(QUIRK_S3C2440 | QUIRK_POLL | QUIRK_NO_GPIO) },
{},
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index d856bc211715..5fda4188a9e5 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -899,17 +899,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
if (resource_size(res) > 0x17)
pd->flags |= IIC_FLAG_HAS_ICIC67;
- /* Enable Runtime PM for this device.
- *
- * Also tell the Runtime PM core to ignore children
- * for this device since it is valid for us to suspend
- * this I2C master driver even though the slave devices
- * on the I2C bus may not be suspended.
- *
- * The state of the I2C hardware bus is unaffected by
- * the Runtime PM state.
- */
- pm_suspend_ignore_children(&dev->dev, true);
pm_runtime_enable(&dev->dev);
pm_runtime_get_sync(&dev->dev);
diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
new file mode 100644
index 000000000000..d75fbcbf02ef
--- /dev/null
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -0,0 +1,153 @@
+/*
+ * i2c-stm32.c
+ *
+ * Copyright (C) M'boumba Cedric Madianga 2017
+ * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include "i2c-stm32.h"
+
+/* Functions for DMA support */
+struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
+ dma_addr_t phy_addr,
+ u32 txdr_offset,
+ u32 rxdr_offset)
+{
+ struct stm32_i2c_dma *dma;
+ struct dma_slave_config dma_sconfig;
+ int ret;
+
+ dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
+ if (!dma)
+ return NULL;
+
+ /* Request and configure I2C TX dma channel */
+ dma->chan_tx = dma_request_slave_channel(dev, "tx");
+ if (!dma->chan_tx) {
+ dev_dbg(dev, "can't request DMA tx channel\n");
+ ret = -EINVAL;
+ goto fail_al;
+ }
+
+ memset(&dma_sconfig, 0, sizeof(dma_sconfig));
+ dma_sconfig.dst_addr = phy_addr + txdr_offset;
+ dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.dst_maxburst = 1;
+ dma_sconfig.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig);
+ if (ret < 0) {
+ dev_err(dev, "can't configure tx channel\n");
+ goto fail_tx;
+ }
+
+ /* Request and configure I2C RX dma channel */
+ dma->chan_rx = dma_request_slave_channel(dev, "rx");
+ if (!dma->chan_rx) {
+ dev_err(dev, "can't request DMA rx channel\n");
+ ret = -EINVAL;
+ goto fail_tx;
+ }
+
+ memset(&dma_sconfig, 0, sizeof(dma_sconfig));
+ dma_sconfig.src_addr = phy_addr + rxdr_offset;
+ dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.src_maxburst = 1;
+ dma_sconfig.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig);
+ if (ret < 0) {
+ dev_err(dev, "can't configure rx channel\n");
+ goto fail_rx;
+ }
+
+ init_completion(&dma->dma_complete);
+
+ dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n",
+ dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
+
+ return dma;
+
+fail_rx:
+ dma_release_channel(dma->chan_rx);
+fail_tx:
+ dma_release_channel(dma->chan_tx);
+fail_al:
+ devm_kfree(dev, dma);
+ dev_info(dev, "can't use DMA\n");
+
+ return NULL;
+}
+
+void stm32_i2c_dma_free(struct stm32_i2c_dma *dma)
+{
+ dma->dma_buf = 0;
+ dma->dma_len = 0;
+
+ dma_release_channel(dma->chan_tx);
+ dma->chan_tx = NULL;
+
+ dma_release_channel(dma->chan_rx);
+ dma->chan_rx = NULL;
+
+ dma->chan_using = NULL;
+}
+
+int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
+ bool rd_wr, u32 len, u8 *buf,
+ dma_async_tx_callback callback,
+ void *dma_async_param)
+{
+ struct dma_async_tx_descriptor *txdesc;
+ struct device *chan_dev;
+ int ret;
+
+ if (rd_wr) {
+ dma->chan_using = dma->chan_rx;
+ dma->dma_transfer_dir = DMA_DEV_TO_MEM;
+ dma->dma_data_dir = DMA_FROM_DEVICE;
+ } else {
+ dma->chan_using = dma->chan_tx;
+ dma->dma_transfer_dir = DMA_MEM_TO_DEV;
+ dma->dma_data_dir = DMA_TO_DEVICE;
+ }
+
+ dma->dma_len = len;
+ chan_dev = dma->chan_using->device->dev;
+
+ dma->dma_buf = dma_map_single(chan_dev, buf, dma->dma_len,
+ dma->dma_data_dir);
+ if (dma_mapping_error(chan_dev, dma->dma_buf)) {
+ dev_err(dev, "DMA mapping failed\n");
+ return -EINVAL;
+ }
+
+ txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf,
+ dma->dma_len,
+ dma->dma_transfer_dir,
+ DMA_PREP_INTERRUPT);
+ if (!txdesc) {
+ dev_err(dev, "Not able to get desc for DMA xfer\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ reinit_completion(&dma->dma_complete);
+
+ txdesc->callback = callback;
+ txdesc->callback_param = dma_async_param;
+ ret = dma_submit_error(dmaengine_submit(txdesc));
+ if (ret < 0) {
+ dev_err(dev, "DMA submit failed\n");
+ goto err;
+ }
+
+ dma_async_issue_pending(dma->chan_using);
+
+ return 0;
+
+err:
+ dma_unmap_single(chan_dev, dma->dma_buf, dma->dma_len,
+ dma->dma_data_dir);
+ return ret;
+}
diff --git a/drivers/i2c/busses/i2c-stm32.h b/drivers/i2c/busses/i2c-stm32.h
index d4f9cef251ac..868755f82f88 100644
--- a/drivers/i2c/busses/i2c-stm32.h
+++ b/drivers/i2c/busses/i2c-stm32.h
@@ -11,6 +11,10 @@
#ifndef _I2C_STM32_H
#define _I2C_STM32_H
+#include <linux/dma-direction.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+
enum stm32_i2c_speed {
STM32_I2C_SPEED_STANDARD, /* 100 kHz */
STM32_I2C_SPEED_FAST, /* 400 kHz */
@@ -18,4 +22,37 @@ enum stm32_i2c_speed {
STM32_I2C_SPEED_END,
};
+/**
+ * struct stm32_i2c_dma - DMA specific data
+ * @chan_tx: dma channel for TX transfer
+ * @chan_rx: dma channel for RX transfer
+ * @chan_using: dma channel used for the current transfer (TX or RX)
+ * @dma_buf: dma buffer
+ * @dma_len: dma buffer len
+ * @dma_transfer_dir: dma transfer direction indicator
+ * @dma_data_dir: dma transfer mode indicator
+ * @dma_complete: dma transfer completion
+ */
+struct stm32_i2c_dma {
+ struct dma_chan *chan_tx;
+ struct dma_chan *chan_rx;
+ struct dma_chan *chan_using;
+ dma_addr_t dma_buf;
+ unsigned int dma_len;
+ enum dma_transfer_direction dma_transfer_dir;
+ enum dma_data_direction dma_data_dir;
+ struct completion dma_complete;
+};
+
+struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
+ dma_addr_t phy_addr,
+ u32 txdr_offset, u32 rxdr_offset);
+
+void stm32_i2c_dma_free(struct stm32_i2c_dma *dma);
+
+int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
+ bool rd_wr, u32 len, u8 *buf,
+ dma_async_tx_callback callback,
+ void *dma_async_param);
+
#endif /* _I2C_STM32_H */
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index f273e28c39db..62d023e737d9 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -35,6 +35,9 @@
/* STM32F7 I2C registers */
#define STM32F7_I2C_CR1 0x00
#define STM32F7_I2C_CR2 0x04
+#define STM32F7_I2C_OAR1 0x08
+#define STM32F7_I2C_OAR2 0x0C
+#define STM32F7_I2C_PECR 0x20
#define STM32F7_I2C_TIMINGR 0x10
#define STM32F7_I2C_ISR 0x18
#define STM32F7_I2C_ICR 0x1C
@@ -42,6 +45,10 @@
#define STM32F7_I2C_TXDR 0x28
/* STM32F7 I2C control 1 */
+#define STM32F7_I2C_CR1_PECEN BIT(23)
+#define STM32F7_I2C_CR1_SBC BIT(16)
+#define STM32F7_I2C_CR1_RXDMAEN BIT(15)
+#define STM32F7_I2C_CR1_TXDMAEN BIT(14)
#define STM32F7_I2C_CR1_ANFOFF BIT(12)
#define STM32F7_I2C_CR1_ERRIE BIT(7)
#define STM32F7_I2C_CR1_TCIE BIT(6)
@@ -57,34 +64,77 @@
| STM32F7_I2C_CR1_NACKIE \
| STM32F7_I2C_CR1_RXIE \
| STM32F7_I2C_CR1_TXIE)
+#define STM32F7_I2C_XFER_IRQ_MASK (STM32F7_I2C_CR1_TCIE \
+ | STM32F7_I2C_CR1_STOPIE \
+ | STM32F7_I2C_CR1_NACKIE \
+ | STM32F7_I2C_CR1_RXIE \
+ | STM32F7_I2C_CR1_TXIE)
/* STM32F7 I2C control 2 */
+#define STM32F7_I2C_CR2_PECBYTE BIT(26)
#define STM32F7_I2C_CR2_RELOAD BIT(24)
#define STM32F7_I2C_CR2_NBYTES_MASK GENMASK(23, 16)
#define STM32F7_I2C_CR2_NBYTES(n) (((n) & 0xff) << 16)
#define STM32F7_I2C_CR2_NACK BIT(15)
#define STM32F7_I2C_CR2_STOP BIT(14)
#define STM32F7_I2C_CR2_START BIT(13)
+#define STM32F7_I2C_CR2_HEAD10R BIT(12)
+#define STM32F7_I2C_CR2_ADD10 BIT(11)
#define STM32F7_I2C_CR2_RD_WRN BIT(10)
+#define STM32F7_I2C_CR2_SADD10_MASK GENMASK(9, 0)
+#define STM32F7_I2C_CR2_SADD10(n) (((n) & \
+ STM32F7_I2C_CR2_SADD10_MASK))
#define STM32F7_I2C_CR2_SADD7_MASK GENMASK(7, 1)
#define STM32F7_I2C_CR2_SADD7(n) (((n) & 0x7f) << 1)
+/* STM32F7 I2C Own Address 1 */
+#define STM32F7_I2C_OAR1_OA1EN BIT(15)
+#define STM32F7_I2C_OAR1_OA1MODE BIT(10)
+#define STM32F7_I2C_OAR1_OA1_10_MASK GENMASK(9, 0)
+#define STM32F7_I2C_OAR1_OA1_10(n) (((n) & \
+ STM32F7_I2C_OAR1_OA1_10_MASK))
+#define STM32F7_I2C_OAR1_OA1_7_MASK GENMASK(7, 1)
+#define STM32F7_I2C_OAR1_OA1_7(n) (((n) & 0x7f) << 1)
+#define STM32F7_I2C_OAR1_MASK (STM32F7_I2C_OAR1_OA1_7_MASK \
+ | STM32F7_I2C_OAR1_OA1_10_MASK \
+ | STM32F7_I2C_OAR1_OA1EN \
+ | STM32F7_I2C_OAR1_OA1MODE)
+
+/* STM32F7 I2C Own Address 2 */
+#define STM32F7_I2C_OAR2_OA2EN BIT(15)
+#define STM32F7_I2C_OAR2_OA2MSK_MASK GENMASK(10, 8)
+#define STM32F7_I2C_OAR2_OA2MSK(n) (((n) & 0x7) << 8)
+#define STM32F7_I2C_OAR2_OA2_7_MASK GENMASK(7, 1)
+#define STM32F7_I2C_OAR2_OA2_7(n) (((n) & 0x7f) << 1)
+#define STM32F7_I2C_OAR2_MASK (STM32F7_I2C_OAR2_OA2MSK_MASK \
+ | STM32F7_I2C_OAR2_OA2_7_MASK \
+ | STM32F7_I2C_OAR2_OA2EN)
+
/* STM32F7 I2C Interrupt Status */
+#define STM32F7_I2C_ISR_ADDCODE_MASK GENMASK(23, 17)
+#define STM32F7_I2C_ISR_ADDCODE_GET(n) \
+ (((n) & STM32F7_I2C_ISR_ADDCODE_MASK) >> 17)
+#define STM32F7_I2C_ISR_DIR BIT(16)
#define STM32F7_I2C_ISR_BUSY BIT(15)
+#define STM32F7_I2C_ISR_PECERR BIT(11)
#define STM32F7_I2C_ISR_ARLO BIT(9)
#define STM32F7_I2C_ISR_BERR BIT(8)
#define STM32F7_I2C_ISR_TCR BIT(7)
#define STM32F7_I2C_ISR_TC BIT(6)
#define STM32F7_I2C_ISR_STOPF BIT(5)
#define STM32F7_I2C_ISR_NACKF BIT(4)
+#define STM32F7_I2C_ISR_ADDR BIT(3)
#define STM32F7_I2C_ISR_RXNE BIT(2)
#define STM32F7_I2C_ISR_TXIS BIT(1)
+#define STM32F7_I2C_ISR_TXE BIT(0)
/* STM32F7 I2C Interrupt Clear */
+#define STM32F7_I2C_ICR_PECCF BIT(11)
#define STM32F7_I2C_ICR_ARLOCF BIT(9)
#define STM32F7_I2C_ICR_BERRCF BIT(8)
#define STM32F7_I2C_ICR_STOPCF BIT(5)
#define STM32F7_I2C_ICR_NACKCF BIT(4)
+#define STM32F7_I2C_ICR_ADDRCF BIT(3)
/* STM32F7 I2C Timing */
#define STM32F7_I2C_TIMINGR_PRESC(n) (((n) & 0xf) << 28)
@@ -94,6 +144,8 @@
#define STM32F7_I2C_TIMINGR_SCLL(n) ((n) & 0xff)
#define STM32F7_I2C_MAX_LEN 0xff
+#define STM32F7_I2C_DMA_LEN_MIN 0x16
+#define STM32F7_I2C_MAX_SLAVE 0x2
#define STM32F7_I2C_DNF_DEFAULT 0
#define STM32F7_I2C_DNF_MAX 16
@@ -159,11 +211,12 @@ struct stm32f7_i2c_setup {
/**
* struct stm32f7_i2c_timings - private I2C output parameters
- * @prec: Prescaler value
+ * @node: List entry
+ * @presc: Prescaler value
* @scldel: Data setup time
* @sdadel: Data hold time
* @sclh: SCL high period (master mode)
- * @sclh: SCL low period (master mode)
+ * @scll: SCL low period (master mode)
*/
struct stm32f7_i2c_timings {
struct list_head node;
@@ -176,18 +229,30 @@ struct stm32f7_i2c_timings {
/**
* struct stm32f7_i2c_msg - client specific data
- * @addr: 8-bit slave addr, including r/w bit
+ * @addr: 8-bit or 10-bit slave addr, including r/w bit
* @count: number of bytes to be transferred
* @buf: data buffer
* @result: result of the transfer
* @stop: last I2C msg to be sent, i.e. STOP to be generated
+ * @smbus: boolean to know if the I2C IP is used in SMBus mode
+ * @size: type of SMBus protocol
+ * @read_write: direction of SMBus protocol
+ * SMBus block read and SMBus block write - block read process call protocols
+ * @smbus_buf: buffer to be used for SMBus protocol transfer. It will
+ * contain a maximum of 32 bytes of data + byte command + byte count + PEC
+ * This buffer has to be 32-bit aligned to be compliant with memory address
+ * register in DMA mode.
*/
struct stm32f7_i2c_msg {
- u8 addr;
+ u16 addr;
u32 count;
u8 *buf;
int result;
bool stop;
+ bool smbus;
+ int size;
+ char read_write;
+ u8 smbus_buf[I2C_SMBUS_BLOCK_MAX + 3] __aligned(4);
};
/**
@@ -204,6 +269,13 @@ struct stm32f7_i2c_msg {
* @f7_msg: customized i2c msg for driver usage
* @setup: I2C timing input setup
* @timing: I2C computed timings
+ * @slave: list of slave devices registered on the I2C bus
+ * @slave_running: slave device currently used
+ * @slave_dir: transfer direction for the current slave device
+ * @master_mode: boolean to know in which mode the I2C is running (master or
+ * slave)
+ * @dma: dma data
+ * @use_dma: boolean to know if dma is used in the current transfer
*/
struct stm32f7_i2c_dev {
struct i2c_adapter adap;
@@ -218,6 +290,12 @@ struct stm32f7_i2c_dev {
struct stm32f7_i2c_msg f7_msg;
struct stm32f7_i2c_setup setup;
struct stm32f7_i2c_timings timing;
+ struct i2c_client *slave[STM32F7_I2C_MAX_SLAVE];
+ struct i2c_client *slave_running;
+ u32 slave_dir;
+ bool master_mode;
+ struct stm32_i2c_dma *dma;
+ bool use_dma;
};
/**
@@ -283,6 +361,11 @@ static inline void stm32f7_i2c_clr_bits(void __iomem *reg, u32 mask)
writel_relaxed(readl_relaxed(reg) & ~mask, reg);
}
+static void stm32f7_i2c_disable_irq(struct stm32f7_i2c_dev *i2c_dev, u32 mask)
+{
+ stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, mask);
+}
+
static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
struct stm32f7_i2c_setup *setup,
struct stm32f7_i2c_timings *output)
@@ -524,6 +607,25 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
return 0;
}
+static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
+{
+ void __iomem *base = i2c_dev->base;
+ u32 mask = STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN;
+
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask);
+}
+
+static void stm32f7_i2c_dma_callback(void *arg)
+{
+ struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ struct device *dev = dma->chan_using->device->dev;
+
+ stm32f7_i2c_disable_dma_req(i2c_dev);
+ dma_unmap_single(dev, dma->dma_buf, dma->dma_len, dma->dma_data_dir);
+ complete(&dma->dma_complete);
+}
+
static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
{
struct stm32f7_i2c_timings *t = &i2c_dev->timing;
@@ -567,6 +669,9 @@ static void stm32f7_i2c_read_rx_data(struct stm32f7_i2c_dev *i2c_dev)
if (f7_msg->count) {
*f7_msg->buf++ = readb_relaxed(base + STM32F7_I2C_RXDR);
f7_msg->count--;
+ } else {
+ /* Flush RX buffer has no data is expected */
+ readb_relaxed(base + STM32F7_I2C_RXDR);
}
}
@@ -575,6 +680,9 @@ static void stm32f7_i2c_reload(struct stm32f7_i2c_dev *i2c_dev)
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
u32 cr2;
+ if (i2c_dev->use_dma)
+ f7_msg->count -= STM32F7_I2C_MAX_LEN;
+
cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
cr2 &= ~STM32F7_I2C_CR2_NBYTES_MASK;
@@ -588,6 +696,43 @@ static void stm32f7_i2c_reload(struct stm32f7_i2c_dev *i2c_dev)
writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
}
+static void stm32f7_i2c_smbus_reload(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ u32 cr2;
+ u8 *val;
+
+ /*
+ * For I2C_SMBUS_BLOCK_DATA && I2C_SMBUS_BLOCK_PROC_CALL, the first
+ * data received inform us how many data will follow.
+ */
+ stm32f7_i2c_read_rx_data(i2c_dev);
+
+ /*
+ * Update NBYTES with the value read to continue the transfer
+ */
+ val = f7_msg->buf - sizeof(u8);
+ f7_msg->count = *val;
+ cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+ cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
+ cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+ writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
+}
+
+static int stm32f7_i2c_release_bus(struct i2c_adapter *i2c_adap)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+
+ dev_info(i2c_dev->dev, "Trying to recover bus\n");
+
+ stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
+ STM32F7_I2C_CR1_PE);
+
+ stm32f7_i2c_hw_config(i2c_dev);
+
+ return 0;
+}
+
static int stm32f7_i2c_wait_free_bus(struct stm32f7_i2c_dev *i2c_dev)
{
u32 status;
@@ -597,12 +742,18 @@ static int stm32f7_i2c_wait_free_bus(struct stm32f7_i2c_dev *i2c_dev)
status,
!(status & STM32F7_I2C_ISR_BUSY),
10, 1000);
+ if (!ret)
+ return 0;
+
+ dev_info(i2c_dev->dev, "bus busy\n");
+
+ ret = stm32f7_i2c_release_bus(&i2c_dev->adap);
if (ret) {
- dev_dbg(i2c_dev->dev, "bus busy\n");
- ret = -EBUSY;
+ dev_err(i2c_dev->dev, "Failed to recover the bus (%d)\n", ret);
+ return ret;
}
- return ret;
+ return -EBUSY;
}
static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
@@ -611,6 +762,7 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
void __iomem *base = i2c_dev->base;
u32 cr1, cr2;
+ int ret;
f7_msg->addr = msg->addr;
f7_msg->buf = msg->buf;
@@ -629,8 +781,15 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
cr2 |= STM32F7_I2C_CR2_RD_WRN;
/* Set slave address */
- cr2 &= ~STM32F7_I2C_CR2_SADD7_MASK;
- cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr);
+ cr2 &= ~(STM32F7_I2C_CR2_HEAD10R | STM32F7_I2C_CR2_ADD10);
+ if (msg->flags & I2C_M_TEN) {
+ cr2 &= ~STM32F7_I2C_CR2_SADD10_MASK;
+ cr2 |= STM32F7_I2C_CR2_SADD10(f7_msg->addr);
+ cr2 |= STM32F7_I2C_CR2_ADD10;
+ } else {
+ cr2 &= ~STM32F7_I2C_CR2_SADD7_MASK;
+ cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr);
+ }
/* Set nb bytes to transfer and reload if needed */
cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
@@ -645,16 +804,286 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
cr1 |= STM32F7_I2C_CR1_ERRIE | STM32F7_I2C_CR1_TCIE |
STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE;
- /* Clear TX/RX interrupt */
+ /* Clear DMA req and TX/RX interrupt */
+ cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE |
+ STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN);
+
+ /* Configure DMA or enable RX/TX interrupt */
+ i2c_dev->use_dma = false;
+ if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) {
+ ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+ msg->flags & I2C_M_RD,
+ f7_msg->count, f7_msg->buf,
+ stm32f7_i2c_dma_callback,
+ i2c_dev);
+ if (!ret)
+ i2c_dev->use_dma = true;
+ else
+ dev_warn(i2c_dev->dev, "can't use DMA\n");
+ }
+
+ if (!i2c_dev->use_dma) {
+ if (msg->flags & I2C_M_RD)
+ cr1 |= STM32F7_I2C_CR1_RXIE;
+ else
+ cr1 |= STM32F7_I2C_CR1_TXIE;
+ } else {
+ if (msg->flags & I2C_M_RD)
+ cr1 |= STM32F7_I2C_CR1_RXDMAEN;
+ else
+ cr1 |= STM32F7_I2C_CR1_TXDMAEN;
+ }
+
+ /* Configure Start/Repeated Start */
+ cr2 |= STM32F7_I2C_CR2_START;
+
+ i2c_dev->master_mode = true;
+
+ /* Write configurations registers */
+ writel_relaxed(cr1, base + STM32F7_I2C_CR1);
+ writel_relaxed(cr2, base + STM32F7_I2C_CR2);
+}
+
+static int stm32f7_i2c_smbus_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
+ unsigned short flags, u8 command,
+ union i2c_smbus_data *data)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct device *dev = i2c_dev->dev;
+ void __iomem *base = i2c_dev->base;
+ u32 cr1, cr2;
+ int i, ret;
+
+ f7_msg->result = 0;
+ reinit_completion(&i2c_dev->complete);
+
+ cr2 = readl_relaxed(base + STM32F7_I2C_CR2);
+ cr1 = readl_relaxed(base + STM32F7_I2C_CR1);
+
+ /* Set transfer direction */
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ if (f7_msg->read_write)
+ cr2 |= STM32F7_I2C_CR2_RD_WRN;
+
+ /* Set slave address */
+ cr2 &= ~(STM32F7_I2C_CR2_ADD10 | STM32F7_I2C_CR2_SADD7_MASK);
+ cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr);
+
+ f7_msg->smbus_buf[0] = command;
+ switch (f7_msg->size) {
+ case I2C_SMBUS_QUICK:
+ f7_msg->stop = true;
+ f7_msg->count = 0;
+ break;
+ case I2C_SMBUS_BYTE:
+ f7_msg->stop = true;
+ f7_msg->count = 1;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (f7_msg->read_write) {
+ f7_msg->stop = false;
+ f7_msg->count = 1;
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ } else {
+ f7_msg->stop = true;
+ f7_msg->count = 2;
+ f7_msg->smbus_buf[1] = data->byte;
+ }
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (f7_msg->read_write) {
+ f7_msg->stop = false;
+ f7_msg->count = 1;
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ } else {
+ f7_msg->stop = true;
+ f7_msg->count = 3;
+ f7_msg->smbus_buf[1] = data->word & 0xff;
+ f7_msg->smbus_buf[2] = data->word >> 8;
+ }
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ if (f7_msg->read_write) {
+ f7_msg->stop = false;
+ f7_msg->count = 1;
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ } else {
+ f7_msg->stop = true;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX ||
+ !data->block[0]) {
+ dev_err(dev, "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ f7_msg->count = data->block[0] + 2;
+ for (i = 1; i < f7_msg->count; i++)
+ f7_msg->smbus_buf[i] = data->block[i - 1];
+ }
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ f7_msg->stop = false;
+ f7_msg->count = 3;
+ f7_msg->smbus_buf[1] = data->word & 0xff;
+ f7_msg->smbus_buf[2] = data->word >> 8;
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ f7_msg->read_write = I2C_SMBUS_READ;
+ break;
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ f7_msg->stop = false;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX - 1) {
+ dev_err(dev, "Invalid block write size %d\n",
+ data->block[0]);
+ return -EINVAL;
+ }
+ f7_msg->count = data->block[0] + 2;
+ for (i = 1; i < f7_msg->count; i++)
+ f7_msg->smbus_buf[i] = data->block[i - 1];
+ cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+ f7_msg->read_write = I2C_SMBUS_READ;
+ break;
+ default:
+ dev_err(dev, "Unsupported smbus protocol %d\n", f7_msg->size);
+ return -EOPNOTSUPP;
+ }
+
+ f7_msg->buf = f7_msg->smbus_buf;
+
+ /* Configure PEC */
+ if ((flags & I2C_CLIENT_PEC) && f7_msg->size != I2C_SMBUS_QUICK) {
+ cr1 |= STM32F7_I2C_CR1_PECEN;
+ cr2 |= STM32F7_I2C_CR2_PECBYTE;
+ if (!f7_msg->read_write)
+ f7_msg->count++;
+ } else {
+ cr1 &= ~STM32F7_I2C_CR1_PECEN;
+ cr2 &= ~STM32F7_I2C_CR2_PECBYTE;
+ }
+
+ /* Set number of bytes to be transferred */
+ cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
+ cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+
+ /* Enable NACK, STOP, error and transfer complete interrupts */
+ cr1 |= STM32F7_I2C_CR1_ERRIE | STM32F7_I2C_CR1_TCIE |
+ STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE;
+
+ /* Clear DMA req and TX/RX interrupt */
+ cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE |
+ STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN);
+
+ /* Configure DMA or enable RX/TX interrupt */
+ i2c_dev->use_dma = false;
+ if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) {
+ ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+ cr2 & STM32F7_I2C_CR2_RD_WRN,
+ f7_msg->count, f7_msg->buf,
+ stm32f7_i2c_dma_callback,
+ i2c_dev);
+ if (!ret)
+ i2c_dev->use_dma = true;
+ else
+ dev_warn(i2c_dev->dev, "can't use DMA\n");
+ }
+
+ if (!i2c_dev->use_dma) {
+ if (cr2 & STM32F7_I2C_CR2_RD_WRN)
+ cr1 |= STM32F7_I2C_CR1_RXIE;
+ else
+ cr1 |= STM32F7_I2C_CR1_TXIE;
+ } else {
+ if (cr2 & STM32F7_I2C_CR2_RD_WRN)
+ cr1 |= STM32F7_I2C_CR1_RXDMAEN;
+ else
+ cr1 |= STM32F7_I2C_CR1_TXDMAEN;
+ }
+
+ /* Set Start bit */
+ cr2 |= STM32F7_I2C_CR2_START;
+
+ i2c_dev->master_mode = true;
+
+ /* Write configurations registers */
+ writel_relaxed(cr1, base + STM32F7_I2C_CR1);
+ writel_relaxed(cr2, base + STM32F7_I2C_CR2);
+
+ return 0;
+}
+
+static void stm32f7_i2c_smbus_rep_start(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ void __iomem *base = i2c_dev->base;
+ u32 cr1, cr2;
+ int ret;
+
+ cr2 = readl_relaxed(base + STM32F7_I2C_CR2);
+ cr1 = readl_relaxed(base + STM32F7_I2C_CR1);
+
+ /* Set transfer direction */
+ cr2 |= STM32F7_I2C_CR2_RD_WRN;
+
+ switch (f7_msg->size) {
+ case I2C_SMBUS_BYTE_DATA:
+ f7_msg->count = 1;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ f7_msg->count = 2;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ f7_msg->count = 1;
+ cr2 |= STM32F7_I2C_CR2_RELOAD;
+ break;
+ }
+
+ f7_msg->buf = f7_msg->smbus_buf;
+ f7_msg->stop = true;
+
+ /* Add one byte for PEC if needed */
+ if (cr1 & STM32F7_I2C_CR1_PECEN)
+ f7_msg->count++;
+
+ /* Set number of bytes to be transferred */
+ cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK);
+ cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+
+ /*
+ * Configure RX/TX interrupt:
+ */
cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE);
+ cr1 |= STM32F7_I2C_CR1_RXIE;
- /* Enable RX/TX interrupt according to msg direction */
- if (msg->flags & I2C_M_RD)
+ /*
+ * Configure DMA or enable RX/TX interrupt:
+ * For I2C_SMBUS_BLOCK_DATA and I2C_SMBUS_BLOCK_PROC_CALL we don't use
+ * dma as we don't know in advance how many data will be received
+ */
+ cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE |
+ STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN);
+
+ i2c_dev->use_dma = false;
+ if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN &&
+ f7_msg->size != I2C_SMBUS_BLOCK_DATA &&
+ f7_msg->size != I2C_SMBUS_BLOCK_PROC_CALL) {
+ ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+ cr2 & STM32F7_I2C_CR2_RD_WRN,
+ f7_msg->count, f7_msg->buf,
+ stm32f7_i2c_dma_callback,
+ i2c_dev);
+
+ if (!ret)
+ i2c_dev->use_dma = true;
+ else
+ dev_warn(i2c_dev->dev, "can't use DMA\n");
+ }
+
+ if (!i2c_dev->use_dma)
cr1 |= STM32F7_I2C_CR1_RXIE;
else
- cr1 |= STM32F7_I2C_CR1_TXIE;
+ cr1 |= STM32F7_I2C_CR1_RXDMAEN;
- /* Configure Start/Repeated Start */
+ /* Configure Repeated Start */
cr2 |= STM32F7_I2C_CR2_START;
/* Write configurations registers */
@@ -662,9 +1091,278 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
writel_relaxed(cr2, base + STM32F7_I2C_CR2);
}
-static void stm32f7_i2c_disable_irq(struct stm32f7_i2c_dev *i2c_dev, u32 mask)
+static int stm32f7_i2c_smbus_check_pec(struct stm32f7_i2c_dev *i2c_dev)
{
- stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, mask);
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ u8 count, internal_pec, received_pec;
+
+ internal_pec = readl_relaxed(i2c_dev->base + STM32F7_I2C_PECR);
+
+ switch (f7_msg->size) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ received_pec = f7_msg->smbus_buf[1];
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ received_pec = f7_msg->smbus_buf[2];
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ count = f7_msg->smbus_buf[0];
+ received_pec = f7_msg->smbus_buf[count];
+ break;
+ default:
+ dev_err(i2c_dev->dev, "Unsupported smbus protocol for PEC\n");
+ return -EINVAL;
+ }
+
+ if (internal_pec != received_pec) {
+ dev_err(i2c_dev->dev, "Bad PEC 0x%02x vs. 0x%02x\n",
+ internal_pec, received_pec);
+ return -EBADMSG;
+ }
+
+ return 0;
+}
+
+static bool stm32f7_i2c_is_addr_match(struct i2c_client *slave, u32 addcode)
+{
+ u32 addr;
+
+ if (!slave)
+ return false;
+
+ if (slave->flags & I2C_CLIENT_TEN) {
+ /*
+ * For 10-bit addr, addcode = 11110XY with
+ * X = Bit 9 of slave address
+ * Y = Bit 8 of slave address
+ */
+ addr = slave->addr >> 8;
+ addr |= 0x78;
+ if (addr == addcode)
+ return true;
+ } else {
+ addr = slave->addr & 0x7f;
+ if (addr == addcode)
+ return true;
+ }
+
+ return false;
+}
+
+static void stm32f7_i2c_slave_start(struct stm32f7_i2c_dev *i2c_dev)
+{
+ struct i2c_client *slave = i2c_dev->slave_running;
+ void __iomem *base = i2c_dev->base;
+ u32 mask;
+ u8 value = 0;
+
+ if (i2c_dev->slave_dir) {
+ /* Notify i2c slave that new read transfer is starting */
+ i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+
+ /*
+ * Disable slave TX config in case of I2C combined message
+ * (I2C Write followed by I2C Read)
+ */
+ mask = STM32F7_I2C_CR2_RELOAD;
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR2, mask);
+ mask = STM32F7_I2C_CR1_SBC | STM32F7_I2C_CR1_RXIE |
+ STM32F7_I2C_CR1_TCIE;
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask);
+
+ /* Enable TX empty, STOP, NACK interrupts */
+ mask = STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE |
+ STM32F7_I2C_CR1_TXIE;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+
+ } else {
+ /* Notify i2c slave that new write transfer is starting */
+ i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+ /* Set reload mode to be able to ACK/NACK each received byte */
+ mask = STM32F7_I2C_CR2_RELOAD;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+
+ /*
+ * Set STOP, NACK, RX empty and transfer complete interrupts.*
+ * Set Slave Byte Control to be able to ACK/NACK each data
+ * byte received
+ */
+ mask = STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE |
+ STM32F7_I2C_CR1_SBC | STM32F7_I2C_CR1_RXIE |
+ STM32F7_I2C_CR1_TCIE;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+ }
+}
+
+static void stm32f7_i2c_slave_addr(struct stm32f7_i2c_dev *i2c_dev)
+{
+ void __iomem *base = i2c_dev->base;
+ u32 isr, addcode, dir, mask;
+ int i;
+
+ isr = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+ addcode = STM32F7_I2C_ISR_ADDCODE_GET(isr);
+ dir = isr & STM32F7_I2C_ISR_DIR;
+
+ for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ if (stm32f7_i2c_is_addr_match(i2c_dev->slave[i], addcode)) {
+ i2c_dev->slave_running = i2c_dev->slave[i];
+ i2c_dev->slave_dir = dir;
+
+ /* Start I2C slave processing */
+ stm32f7_i2c_slave_start(i2c_dev);
+
+ /* Clear ADDR flag */
+ mask = STM32F7_I2C_ICR_ADDRCF;
+ writel_relaxed(mask, base + STM32F7_I2C_ICR);
+ break;
+ }
+ }
+}
+
+static int stm32f7_i2c_get_slave_id(struct stm32f7_i2c_dev *i2c_dev,
+ struct i2c_client *slave, int *id)
+{
+ int i;
+
+ for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ if (i2c_dev->slave[i] == slave) {
+ *id = i;
+ return 0;
+ }
+ }
+
+ dev_err(i2c_dev->dev, "Slave 0x%x not registered\n", slave->addr);
+
+ return -ENODEV;
+}
+
+static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
+ struct i2c_client *slave, int *id)
+{
+ struct device *dev = i2c_dev->dev;
+ int i;
+
+ /*
+ * slave[0] supports 7-bit and 10-bit slave address
+ * slave[1] supports 7-bit slave address only
+ */
+ for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ if (i == 1 && (slave->flags & I2C_CLIENT_PEC))
+ continue;
+ if (!i2c_dev->slave[i]) {
+ *id = i;
+ return 0;
+ }
+ }
+
+ dev_err(dev, "Slave 0x%x could not be registered\n", slave->addr);
+
+ return -EINVAL;
+}
+
+static bool stm32f7_i2c_is_slave_registered(struct stm32f7_i2c_dev *i2c_dev)
+{
+ int i;
+
+ for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ if (i2c_dev->slave[i])
+ return true;
+ }
+
+ return false;
+}
+
+static bool stm32f7_i2c_is_slave_busy(struct stm32f7_i2c_dev *i2c_dev)
+{
+ int i, busy;
+
+ busy = 0;
+ for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+ if (i2c_dev->slave[i])
+ busy++;
+ }
+
+ return i == busy;
+}
+
+static irqreturn_t stm32f7_i2c_slave_isr_event(struct stm32f7_i2c_dev *i2c_dev)
+{
+ void __iomem *base = i2c_dev->base;
+ u32 cr2, status, mask;
+ u8 val;
+ int ret;
+
+ status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+ /* Slave transmitter mode */
+ if (status & STM32F7_I2C_ISR_TXIS) {
+ i2c_slave_event(i2c_dev->slave_running,
+ I2C_SLAVE_READ_PROCESSED,
+ &val);
+
+ /* Write data byte */
+ writel_relaxed(val, base + STM32F7_I2C_TXDR);
+ }
+
+ /* Transfer Complete Reload for Slave receiver mode */
+ if (status & STM32F7_I2C_ISR_TCR || status & STM32F7_I2C_ISR_RXNE) {
+ /*
+ * Read data byte then set NBYTES to receive next byte or NACK
+ * the current received byte
+ */
+ val = readb_relaxed(i2c_dev->base + STM32F7_I2C_RXDR);
+ ret = i2c_slave_event(i2c_dev->slave_running,
+ I2C_SLAVE_WRITE_RECEIVED,
+ &val);
+ if (!ret) {
+ cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+ cr2 |= STM32F7_I2C_CR2_NBYTES(1);
+ writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
+ } else {
+ mask = STM32F7_I2C_CR2_NACK;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+ }
+ }
+
+ /* NACK received */
+ if (status & STM32F7_I2C_ISR_NACKF) {
+ dev_dbg(i2c_dev->dev, "<%s>: Receive NACK\n", __func__);
+ writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
+ }
+
+ /* STOP received */
+ if (status & STM32F7_I2C_ISR_STOPF) {
+ /* Disable interrupts */
+ stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_XFER_IRQ_MASK);
+
+ if (i2c_dev->slave_dir) {
+ /*
+ * Flush TX buffer in order to not used the byte in
+ * TXDR for the next transfer
+ */
+ mask = STM32F7_I2C_ISR_TXE;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_ISR, mask);
+ }
+
+ /* Clear STOP flag */
+ writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR);
+
+ /* Notify i2c slave that a STOP flag has been detected */
+ i2c_slave_event(i2c_dev->slave_running, I2C_SLAVE_STOP, &val);
+
+ i2c_dev->slave_running = NULL;
+ }
+
+ /* Address match received */
+ if (status & STM32F7_I2C_ISR_ADDR)
+ stm32f7_i2c_slave_addr(i2c_dev);
+
+ return IRQ_HANDLED;
}
static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
@@ -673,6 +1371,13 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
void __iomem *base = i2c_dev->base;
u32 status, mask;
+ int ret = IRQ_HANDLED;
+
+ /* Check if the interrupt if for a slave device */
+ if (!i2c_dev->master_mode) {
+ ret = stm32f7_i2c_slave_isr_event(i2c_dev);
+ return ret;
+ }
status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
@@ -694,12 +1399,21 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
/* STOP detection flag */
if (status & STM32F7_I2C_ISR_STOPF) {
/* Disable interrupts */
- stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+ if (stm32f7_i2c_is_slave_registered(i2c_dev))
+ mask = STM32F7_I2C_XFER_IRQ_MASK;
+ else
+ mask = STM32F7_I2C_ALL_IRQ_MASK;
+ stm32f7_i2c_disable_irq(i2c_dev, mask);
/* Clear STOP flag */
writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR);
- complete(&i2c_dev->complete);
+ if (i2c_dev->use_dma) {
+ ret = IRQ_WAKE_THREAD;
+ } else {
+ i2c_dev->master_mode = false;
+ complete(&i2c_dev->complete);
+ }
}
/* Transfer complete */
@@ -707,6 +1421,10 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
if (f7_msg->stop) {
mask = STM32F7_I2C_CR2_STOP;
stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+ } else if (i2c_dev->use_dma) {
+ ret = IRQ_WAKE_THREAD;
+ } else if (f7_msg->smbus) {
+ stm32f7_i2c_smbus_rep_start(i2c_dev);
} else {
i2c_dev->msg_id++;
i2c_dev->msg++;
@@ -714,13 +1432,50 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
}
}
+ if (status & STM32F7_I2C_ISR_TCR) {
+ if (f7_msg->smbus)
+ stm32f7_i2c_smbus_reload(i2c_dev);
+ else
+ stm32f7_i2c_reload(i2c_dev);
+ }
+
+ return ret;
+}
+
+static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
+{
+ struct stm32f7_i2c_dev *i2c_dev = data;
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ u32 status;
+ int ret;
+
/*
- * Transfer Complete Reload: 255 data bytes have been transferred
- * We have to prepare the I2C controller to transfer the remaining
- * data.
+ * Wait for dma transfer completion before sending next message or
+ * notity the end of xfer to the client
*/
- if (status & STM32F7_I2C_ISR_TCR)
- stm32f7_i2c_reload(i2c_dev);
+ ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
+ if (!ret) {
+ dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
+ stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_all(dma->chan_using);
+ f7_msg->result = -ETIMEDOUT;
+ }
+
+ status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+ if (status & STM32F7_I2C_ISR_TC) {
+ if (f7_msg->smbus) {
+ stm32f7_i2c_smbus_rep_start(i2c_dev);
+ } else {
+ i2c_dev->msg_id++;
+ i2c_dev->msg++;
+ stm32f7_i2c_xfer_msg(i2c_dev, i2c_dev->msg);
+ }
+ } else {
+ i2c_dev->master_mode = false;
+ complete(&i2c_dev->complete);
+ }
return IRQ_HANDLED;
}
@@ -731,7 +1486,8 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
- u32 status;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ u32 mask, status;
status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
@@ -739,6 +1495,7 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
if (status & STM32F7_I2C_ISR_BERR) {
dev_err(dev, "<%s>: Bus error\n", __func__);
writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR);
+ stm32f7_i2c_release_bus(&i2c_dev->adap);
f7_msg->result = -EIO;
}
@@ -749,8 +1506,26 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
f7_msg->result = -EAGAIN;
}
- stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+ if (status & STM32F7_I2C_ISR_PECERR) {
+ dev_err(dev, "<%s>: PEC error in reception\n", __func__);
+ writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR);
+ f7_msg->result = -EINVAL;
+ }
+
+ /* Disable interrupts */
+ if (stm32f7_i2c_is_slave_registered(i2c_dev))
+ mask = STM32F7_I2C_XFER_IRQ_MASK;
+ else
+ mask = STM32F7_I2C_ALL_IRQ_MASK;
+ stm32f7_i2c_disable_irq(i2c_dev, mask);
+
+ /* Disable dma */
+ if (i2c_dev->use_dma) {
+ stm32f7_i2c_disable_dma_req(i2c_dev);
+ dmaengine_terminate_all(dma->chan_using);
+ }
+ i2c_dev->master_mode = false;
complete(&i2c_dev->complete);
return IRQ_HANDLED;
@@ -761,12 +1536,14 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
{
struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
unsigned long time_left;
int ret;
i2c_dev->msg = msgs;
i2c_dev->msg_num = num;
i2c_dev->msg_id = 0;
+ f7_msg->smbus = false;
ret = clk_enable(i2c_dev->clk);
if (ret) {
@@ -787,6 +1564,8 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
if (!time_left) {
dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n",
i2c_dev->msg->addr);
+ if (i2c_dev->use_dma)
+ dmaengine_terminate_all(dma->chan_using);
ret = -ETIMEDOUT;
}
@@ -796,14 +1575,209 @@ clk_free:
return (ret < 0) ? ret : num;
}
+static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(adapter);
+ struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+ struct stm32_i2c_dma *dma = i2c_dev->dma;
+ struct device *dev = i2c_dev->dev;
+ unsigned long timeout;
+ int i, ret;
+
+ f7_msg->addr = addr;
+ f7_msg->size = size;
+ f7_msg->read_write = read_write;
+ f7_msg->smbus = true;
+
+ ret = clk_enable(i2c_dev->clk);
+ if (ret) {
+ dev_err(i2c_dev->dev, "Failed to enable clock\n");
+ return ret;
+ }
+
+ ret = stm32f7_i2c_wait_free_bus(i2c_dev);
+ if (ret)
+ goto clk_free;
+
+ ret = stm32f7_i2c_smbus_xfer_msg(i2c_dev, flags, command, data);
+ if (ret)
+ goto clk_free;
+
+ timeout = wait_for_completion_timeout(&i2c_dev->complete,
+ i2c_dev->adap.timeout);
+ ret = f7_msg->result;
+ if (ret)
+ goto clk_free;
+
+ if (!timeout) {
+ dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
+ if (i2c_dev->use_dma)
+ dmaengine_terminate_all(dma->chan_using);
+ ret = -ETIMEDOUT;
+ goto clk_free;
+ }
+
+ /* Check PEC */
+ if ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && read_write) {
+ ret = stm32f7_i2c_smbus_check_pec(i2c_dev);
+ if (ret)
+ goto clk_free;
+ }
+
+ if (read_write && size != I2C_SMBUS_QUICK) {
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ data->byte = f7_msg->smbus_buf[0];
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ data->word = f7_msg->smbus_buf[0] |
+ (f7_msg->smbus_buf[1] << 8);
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ for (i = 0; i <= f7_msg->smbus_buf[0]; i++)
+ data->block[i] = f7_msg->smbus_buf[i];
+ break;
+ default:
+ dev_err(dev, "Unsupported smbus transaction\n");
+ ret = -EINVAL;
+ }
+ }
+
+clk_free:
+ clk_disable(i2c_dev->clk);
+ return ret;
+}
+
+static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter);
+ void __iomem *base = i2c_dev->base;
+ struct device *dev = i2c_dev->dev;
+ u32 oar1, oar2, mask;
+ int id, ret;
+
+ if (slave->flags & I2C_CLIENT_PEC) {
+ dev_err(dev, "SMBus PEC not supported in slave mode\n");
+ return -EINVAL;
+ }
+
+ if (stm32f7_i2c_is_slave_busy(i2c_dev)) {
+ dev_err(dev, "Too much slave registered\n");
+ return -EBUSY;
+ }
+
+ ret = stm32f7_i2c_get_free_slave_id(i2c_dev, slave, &id);
+ if (ret)
+ return ret;
+
+ if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) {
+ ret = clk_enable(i2c_dev->clk);
+ if (ret) {
+ dev_err(dev, "Failed to enable clock\n");
+ return ret;
+ }
+ }
+
+ if (id == 0) {
+ /* Configure Own Address 1 */
+ oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
+ oar1 &= ~STM32F7_I2C_OAR1_MASK;
+ if (slave->flags & I2C_CLIENT_TEN) {
+ oar1 |= STM32F7_I2C_OAR1_OA1_10(slave->addr);
+ oar1 |= STM32F7_I2C_OAR1_OA1MODE;
+ } else {
+ oar1 |= STM32F7_I2C_OAR1_OA1_7(slave->addr);
+ }
+ oar1 |= STM32F7_I2C_OAR1_OA1EN;
+ i2c_dev->slave[id] = slave;
+ writel_relaxed(oar1, i2c_dev->base + STM32F7_I2C_OAR1);
+ } else if (id == 1) {
+ /* Configure Own Address 2 */
+ oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
+ oar2 &= ~STM32F7_I2C_OAR2_MASK;
+ if (slave->flags & I2C_CLIENT_TEN) {
+ ret = -EOPNOTSUPP;
+ goto exit;
+ }
+
+ oar2 |= STM32F7_I2C_OAR2_OA2_7(slave->addr);
+ oar2 |= STM32F7_I2C_OAR2_OA2EN;
+ i2c_dev->slave[id] = slave;
+ writel_relaxed(oar2, i2c_dev->base + STM32F7_I2C_OAR2);
+ } else {
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ /* Enable ACK */
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR2, STM32F7_I2C_CR2_NACK);
+
+ /* Enable Address match interrupt, error interrupt and enable I2C */
+ mask = STM32F7_I2C_CR1_ADDRIE | STM32F7_I2C_CR1_ERRIE |
+ STM32F7_I2C_CR1_PE;
+ stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+
+ return 0;
+
+exit:
+ if (!(stm32f7_i2c_is_slave_registered(i2c_dev)))
+ clk_disable(i2c_dev->clk);
+
+ return ret;
+}
+
+static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
+{
+ struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter);
+ void __iomem *base = i2c_dev->base;
+ u32 mask;
+ int id, ret;
+
+ ret = stm32f7_i2c_get_slave_id(i2c_dev, slave, &id);
+ if (ret)
+ return ret;
+
+ WARN_ON(!i2c_dev->slave[id]);
+
+ if (id == 0) {
+ mask = STM32F7_I2C_OAR1_OA1EN;
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR1, mask);
+ } else {
+ mask = STM32F7_I2C_OAR2_OA2EN;
+ stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR2, mask);
+ }
+
+ i2c_dev->slave[id] = NULL;
+
+ if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) {
+ stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+ clk_disable(i2c_dev->clk);
+ }
+
+ return 0;
+}
+
static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
+ I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC;
}
static struct i2c_algorithm stm32f7_i2c_algo = {
.master_xfer = stm32f7_i2c_xfer,
+ .smbus_xfer = stm32f7_i2c_smbus_xfer,
.functionality = stm32f7_i2c_func,
+ .reg_slave = stm32f7_i2c_reg_slave,
+ .unreg_slave = stm32f7_i2c_unreg_slave,
};
static int stm32f7_i2c_probe(struct platform_device *pdev)
@@ -815,6 +1789,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
u32 irq_error, irq_event, clk_rate, rise_time, fall_time;
struct i2c_adapter *adap;
struct reset_control *rst;
+ dma_addr_t phy_addr;
int ret;
i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
@@ -825,6 +1800,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(i2c_dev->base))
return PTR_ERR(i2c_dev->base);
+ phy_addr = (dma_addr_t)res->start;
irq_event = irq_of_parse_and_map(np, 0);
if (!irq_event) {
@@ -871,8 +1847,11 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
i2c_dev->dev = &pdev->dev;
- ret = devm_request_irq(&pdev->dev, irq_event, stm32f7_i2c_isr_event, 0,
- pdev->name, i2c_dev);
+ ret = devm_request_threaded_irq(&pdev->dev, irq_event,
+ stm32f7_i2c_isr_event,
+ stm32f7_i2c_isr_event_thread,
+ IRQF_ONESHOT,
+ pdev->name, i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq event %i\n",
irq_event);
@@ -924,6 +1903,11 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
init_completion(&i2c_dev->complete);
+ /* Init DMA config if supported */
+ i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr,
+ STM32F7_I2C_TXDR,
+ STM32F7_I2C_RXDR);
+
ret = i2c_add_adapter(adap);
if (ret)
goto clk_free;
@@ -946,6 +1930,11 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
{
struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+ if (i2c_dev->dma) {
+ stm32_i2c_dma_free(i2c_dev->dma);
+ i2c_dev->dma = NULL;
+ }
+
i2c_del_adapter(&i2c_dev->adap);
clk_unprepare(i2c_dev->clk);
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index dc63236b45b2..e866c481bfc3 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -602,20 +602,24 @@ static int stu300_send_address(struct stu300_dev *dev,
u32 val;
int ret;
- if (msg->flags & I2C_M_TEN)
+ if (msg->flags & I2C_M_TEN) {
/* This is probably how 10 bit addresses look */
val = (0xf0 | (((u32) msg->addr & 0x300) >> 7)) &
I2C_DR_D_MASK;
- else
- val = ((msg->addr << 1) & I2C_DR_D_MASK);
+ if (msg->flags & I2C_M_RD)
+ /* This is the direction bit */
+ val |= 0x01;
+ } else {
+ val = i2c_8bit_addr_from_msg(msg);
+ }
- if (msg->flags & I2C_M_RD) {
- /* This is the direction bit */
- val |= 0x01;
- if (resend)
+ if (resend) {
+ if (msg->flags & I2C_M_RD)
dev_dbg(&dev->pdev->dev, "read resend\n");
- } else if (resend)
- dev_dbg(&dev->pdev->dev, "write resend\n");
+ else
+ dev_dbg(&dev->pdev->dev, "write resend\n");
+ }
+
stu300_wr8(val, dev->virtbase + I2C_DR);
/* For 10bit addressing, await 10bit request (EVENT 9) */
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
index a021f866d8c2..915f5edbab33 100644
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -509,7 +509,7 @@ static int synquacer_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
dev_dbg(i2c->dev, "calculated timeout %d ms\n", i2c->timeout_ms);
- for (retry = 0; retry < adap->retries; retry++) {
+ for (retry = 0; retry <= adap->retries; retry++) {
ret = synquacer_i2c_doxfer(i2c, msgs, num);
if (ret != -EAGAIN)
return ret;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 60292d243e24..5fccd1f1bca8 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -173,7 +173,6 @@ struct tegra_i2c_hw_feature {
* @msg_buf_remaining: size of unsent data in the message buffer
* @msg_read: identifies read transfers
* @bus_clk_rate: current i2c bus clock rate
- * @is_suspended: prevents i2c controller accesses after suspend is called
*/
struct tegra_i2c_dev {
struct device *dev;
@@ -194,7 +193,6 @@ struct tegra_i2c_dev {
int msg_read;
u32 bus_clk_rate;
u16 clk_divisor_non_hs_mode;
- bool is_suspended;
bool is_multimaster_mode;
spinlock_t xfer_lock;
};
@@ -734,9 +732,6 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
int i;
int ret = 0;
- if (i2c_dev->is_suspended)
- return -EBUSY;
-
ret = pm_runtime_get_sync(i2c_dev->dev);
if (ret < 0) {
dev_err(i2c_dev->dev, "runtime resume failed %d\n", ret);
@@ -1051,37 +1046,9 @@ static int tegra_i2c_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM_SLEEP
-static int tegra_i2c_suspend(struct device *dev)
-{
- struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
-
- i2c_lock_adapter(&i2c_dev->adapter);
- i2c_dev->is_suspended = true;
- i2c_unlock_adapter(&i2c_dev->adapter);
-
- return 0;
-}
-
-static int tegra_i2c_resume(struct device *dev)
-{
- struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
- int ret;
-
- i2c_lock_adapter(&i2c_dev->adapter);
-
- ret = tegra_i2c_init(i2c_dev);
- if (!ret)
- i2c_dev->is_suspended = false;
-
- i2c_unlock_adapter(&i2c_dev->adapter);
-
- return ret;
-}
-
static const struct dev_pm_ops tegra_i2c_pm = {
SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
NULL)
- SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
};
#define TEGRA_I2C_PM (&tegra_i2c_pm)
#else
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index c80527816ad0..9a71e50d21f1 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -33,7 +33,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
-#include <linux/i2c-xiic.h>
+#include <linux/platform_data/i2c-xiic.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/of.h>
@@ -143,12 +143,6 @@ struct xiic_i2c {
#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
-/* The following constants are used with the following macros to specify the
- * operation, a read or write operation.
- */
-#define XIIC_READ_OPERATION 1
-#define XIIC_WRITE_OPERATION 0
-
/*
* Tx Fifo upper bit masks.
*/
@@ -415,7 +409,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
clr |= XIIC_INTR_RX_FULL_MASK;
if (!i2c->rx_msg) {
dev_dbg(i2c->adap.dev.parent,
- "%s unexpexted RX IRQ\n", __func__);
+ "%s unexpected RX IRQ\n", __func__);
xiic_clear_rx_fifo(i2c);
goto out;
}
@@ -470,7 +464,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
if (!i2c->tx_msg) {
dev_dbg(i2c->adap.dev.parent,
- "%s unexpexted TX IRQ\n", __func__);
+ "%s unexpected TX IRQ\n", __func__);
goto out;
}
@@ -556,8 +550,7 @@ static void xiic_start_recv(struct xiic_i2c *i2c)
if (!(msg->flags & I2C_M_NOSTART))
/* write the address */
xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
- (msg->addr << 1) | XIIC_READ_OPERATION |
- XIIC_TX_DYN_START_MASK);
+ i2c_8bit_addr_from_msg(msg) | XIIC_TX_DYN_START_MASK);
xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
@@ -585,7 +578,7 @@ static void xiic_start_send(struct xiic_i2c *i2c)
if (!(msg->flags & I2C_M_NOSTART)) {
/* write the address */
- u16 data = ((msg->addr << 1) & 0xfe) | XIIC_WRITE_OPERATION |
+ u16 data = i2c_8bit_addr_from_msg(msg) |
XIIC_TX_DYN_START_MASK;
if ((i2c->nmsgs == 1) && msg->len == 0)
/* no data and last message -> add STOP */
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index eb8913eba0c5..1f41a4f89c08 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -10,6 +10,7 @@
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -84,6 +85,8 @@ struct xlp9xx_i2c_dev {
struct device *dev;
struct i2c_adapter adapter;
struct completion msg_complete;
+ struct i2c_smbus_alert_setup alert_data;
+ struct i2c_client *ara;
int irq;
bool msg_read;
bool len_recv;
@@ -155,9 +158,30 @@ static void xlp9xx_i2c_fill_tx_fifo(struct xlp9xx_i2c_dev *priv)
priv->msg_buf += len;
}
+static void xlp9xx_i2c_update_rlen(struct xlp9xx_i2c_dev *priv)
+{
+ u32 val, len;
+
+ /*
+ * Update receive length. Re-read len to get the latest value,
+ * and then add 4 to have a minimum value that can be safely
+ * written. This is to account for the byte read above, the
+ * transfer in progress and any delays in the register I/O
+ */
+ val = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_CTRL);
+ len = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_FIFOWCNT) &
+ XLP9XX_I2C_FIFO_WCNT_MASK;
+ len = max_t(u32, priv->msg_len, len + 4);
+ if (len >= I2C_SMBUS_BLOCK_MAX + 2)
+ return;
+ val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) |
+ (len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
+ xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, val);
+}
+
static void xlp9xx_i2c_drain_rx_fifo(struct xlp9xx_i2c_dev *priv)
{
- u32 len, i, val;
+ u32 len, i;
u8 rlen, *buf = priv->msg_buf;
len = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_FIFOWCNT) &
@@ -167,21 +191,20 @@ static void xlp9xx_i2c_drain_rx_fifo(struct xlp9xx_i2c_dev *priv)
if (priv->len_recv) {
/* read length byte */
rlen = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_MRXFIFO);
- *buf++ = rlen;
- len--;
-
- if (priv->client_pec)
- ++rlen;
- /* update remaining bytes and message length */
- priv->msg_buf_remaining = rlen;
- priv->msg_len = rlen + 1;
+ if (rlen > I2C_SMBUS_BLOCK_MAX || rlen == 0) {
+ rlen = 0; /*abort transfer */
+ priv->msg_buf_remaining = 0;
+ priv->msg_len = 0;
+ } else {
+ *buf++ = rlen;
+ if (priv->client_pec)
+ ++rlen; /* account for error check byte */
+ /* update remaining bytes and message length */
+ priv->msg_buf_remaining = rlen;
+ priv->msg_len = rlen + 1;
+ }
+ xlp9xx_i2c_update_rlen(priv);
priv->len_recv = false;
-
- /* Update transfer length to read only actual data */
- val = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_CTRL);
- val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) |
- ((rlen + 1) << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
- xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, val);
} else {
len = min(priv->msg_buf_remaining, len);
for (i = 0; i < len; i++, buf++)
@@ -300,10 +323,6 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MFIFOCTRL,
XLP9XX_I2C_MFIFOCTRL_RST);
- /* set FIFO threshold if reading */
- if (priv->msg_read)
- xlp9xx_i2c_update_rx_fifo_thres(priv);
-
/* set slave addr */
xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_SLAVEADDR,
(msg->addr << XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT) |
@@ -322,9 +341,13 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
val &= ~XLP9XX_I2C_CTRL_ADDMODE;
priv->len_recv = msg->flags & I2C_M_RECV_LEN;
- len = priv->len_recv ? XLP9XX_I2C_FIFO_SIZE : msg->len;
+ len = priv->len_recv ? I2C_SMBUS_BLOCK_MAX + 2 : msg->len;
priv->client_pec = msg->flags & I2C_CLIENT_PEC;
+ /* set FIFO threshold if reading */
+ if (priv->msg_read)
+ xlp9xx_i2c_update_rx_fifo_thres(priv);
+
/* set data length to be transferred */
val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) |
(len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
@@ -378,8 +401,11 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
}
/* update msg->len with actual received length */
- if (msg->flags & I2C_M_RECV_LEN)
+ if (msg->flags & I2C_M_RECV_LEN) {
+ if (!priv->msg_len)
+ return -EPROTO;
msg->len = priv->msg_len;
+ }
return 0;
}
@@ -447,6 +473,19 @@ static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
return 0;
}
+static int xlp9xx_i2c_smbus_setup(struct xlp9xx_i2c_dev *priv,
+ struct platform_device *pdev)
+{
+ if (!priv->alert_data.irq)
+ return -EINVAL;
+
+ priv->ara = i2c_setup_smbus_alert(&priv->adapter, &priv->alert_data);
+ if (!priv->ara)
+ return -ENODEV;
+
+ return 0;
+}
+
static int xlp9xx_i2c_probe(struct platform_device *pdev)
{
struct xlp9xx_i2c_dev *priv;
@@ -467,6 +506,10 @@ static int xlp9xx_i2c_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "invalid irq!\n");
return priv->irq;
}
+ /* SMBAlert irq */
+ priv->alert_data.irq = platform_get_irq(pdev, 1);
+ if (priv->alert_data.irq <= 0)
+ priv->alert_data.irq = 0;
xlp9xx_i2c_get_frequency(pdev, priv);
xlp9xx_i2c_init(priv);
@@ -493,6 +536,10 @@ static int xlp9xx_i2c_probe(struct platform_device *pdev)
if (err)
return err;
+ err = xlp9xx_i2c_smbus_setup(priv, pdev);
+ if (err)
+ dev_dbg(&pdev->dev, "No active SMBus alert %d\n", err);
+
platform_set_drvdata(pdev, priv);
dev_dbg(&pdev->dev, "I2C bus:%d added\n", priv->adapter.nr);
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index a17f46a95f73..31d16ada6e7d 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -717,10 +717,6 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
client->adapter = adap;
client->dev.platform_data = info->platform_data;
-
- if (info->archdata)
- client->dev.archdata = *info->archdata;
-
client->flags = info->flags;
client->addr = info->addr;
@@ -746,7 +742,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
client->dev.type = &i2c_client_type;
- client->dev.of_node = info->of_node;
+ client->dev.of_node = of_node_get(info->of_node);
client->dev.fwnode = info->fwnode;
i2c_dev_set_name(adap, client, info);
@@ -757,7 +753,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
dev_err(&adap->dev,
"Failed to add properties to client %s: %d\n",
client->name, status);
- goto out_err;
+ goto out_err_put_of_node;
}
}
@@ -773,6 +769,8 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
out_free_props:
if (info->properties)
device_remove_properties(&client->dev);
+out_err_put_of_node:
+ of_node_put(info->of_node);
out_err:
dev_err(&adap->dev,
"Failed to register i2c client %s at 0x%02x (%d)\n",
diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c
index c405270a98b4..6cb7ad608bcd 100644
--- a/drivers/i2c/i2c-core-of.c
+++ b/drivers/i2c/i2c-core-of.c
@@ -22,53 +22,64 @@
#include "i2c-core.h"
-static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
- struct device_node *node)
+int of_i2c_get_board_info(struct device *dev, struct device_node *node,
+ struct i2c_board_info *info)
{
- struct i2c_client *client;
- struct i2c_board_info info = {};
- struct dev_archdata dev_ad = {};
u32 addr;
int ret;
- dev_dbg(&adap->dev, "of_i2c: register %pOF\n", node);
+ memset(info, 0, sizeof(*info));
- if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
- dev_err(&adap->dev, "of_i2c: modalias failure on %pOF\n",
- node);
- return ERR_PTR(-EINVAL);
+ if (of_modalias_node(node, info->type, sizeof(info->type)) < 0) {
+ dev_err(dev, "of_i2c: modalias failure on %pOF\n", node);
+ return -EINVAL;
}
ret = of_property_read_u32(node, "reg", &addr);
if (ret) {
- dev_err(&adap->dev, "of_i2c: invalid reg on %pOF\n", node);
- return ERR_PTR(ret);
+ dev_err(dev, "of_i2c: invalid reg on %pOF\n", node);
+ return ret;
}
if (addr & I2C_TEN_BIT_ADDRESS) {
addr &= ~I2C_TEN_BIT_ADDRESS;
- info.flags |= I2C_CLIENT_TEN;
+ info->flags |= I2C_CLIENT_TEN;
}
if (addr & I2C_OWN_SLAVE_ADDRESS) {
addr &= ~I2C_OWN_SLAVE_ADDRESS;
- info.flags |= I2C_CLIENT_SLAVE;
+ info->flags |= I2C_CLIENT_SLAVE;
}
- info.addr = addr;
- info.archdata = &dev_ad;
- info.of_node = of_node_get(node);
+ info->addr = addr;
+ info->of_node = node;
if (of_property_read_bool(node, "host-notify"))
- info.flags |= I2C_CLIENT_HOST_NOTIFY;
+ info->flags |= I2C_CLIENT_HOST_NOTIFY;
if (of_get_property(node, "wakeup-source", NULL))
- info.flags |= I2C_CLIENT_WAKE;
+ info->flags |= I2C_CLIENT_WAKE;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_i2c_get_board_info);
+
+static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
+ struct device_node *node)
+{
+ struct i2c_client *client;
+ struct i2c_board_info info;
+ int ret;
+
+ dev_dbg(&adap->dev, "of_i2c: register %pOF\n", node);
+
+ ret = of_i2c_get_board_info(&adap->dev, node, &info);
+ if (ret)
+ return ERR_PTR(ret);
client = i2c_new_device(adap, &info);
if (!client) {
dev_err(&adap->dev, "of_i2c: Failure registering %pOF\n", node);
- of_node_put(node);
return ERR_PTR(-EINVAL);
}
return client;
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index b5aec33002c3..f3f683041e7f 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -466,6 +466,8 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
status = i2c_transfer(adapter, msg, num);
if (status < 0)
return status;
+ if (status != num)
+ return -EIO;
/* Check PEC if last message is a read */
if (i && (msg[num-1].flags & I2C_M_RD)) {
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 9669ca4937b8..300ab4b672e4 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -418,7 +418,7 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
snprintf(symlink_name, sizeof(symlink_name), "channel-%u", chan_id);
WARN(sysfs_create_link(&muxc->dev->kobj, &priv->adap.dev.kobj,
symlink_name),
- "can't create symlink for channel %u\n", chan_id);
+ "can't create symlink to channel %u\n", chan_id);
dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
i2c_adapter_id(&priv->adap));
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index 33ce032cb701..035032e20327 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
@@ -105,7 +106,7 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne
priv->cur_adap.owner = THIS_MODULE;
priv->cur_adap.algo = &priv->algo;
priv->cur_adap.algo_data = priv;
- priv->cur_adap.dev.parent = priv->dev;
+ priv->cur_adap.dev.parent = &adap->dev;
priv->cur_adap.class = adap->class;
priv->cur_adap.retries = adap->retries;
priv->cur_adap.timeout = adap->timeout;
@@ -254,6 +255,8 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
+ pm_runtime_no_callbacks(&pdev->dev);
+
/* switch to first parent as active master */
i2c_demux_activate_master(priv, 0);
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index ddc4bd4ca13b..401308e3d036 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -10,7 +10,7 @@
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
-#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/slab.h>
diff --git a/drivers/i2c/muxes/i2c-mux-ltc4306.c b/drivers/i2c/muxes/i2c-mux-ltc4306.c
index 311b1cced0c0..a9af93259b19 100644
--- a/drivers/i2c/muxes/i2c-mux-ltc4306.c
+++ b/drivers/i2c/muxes/i2c-mux-ltc4306.c
@@ -206,8 +206,7 @@ static const struct of_device_id ltc4306_of_match[] = {
};
MODULE_DEVICE_TABLE(of, ltc4306_of_match);
-static int ltc4306_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int ltc4306_probe(struct i2c_client *client)
{
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
const struct chip_desc *chip;
@@ -221,7 +220,7 @@ static int ltc4306_probe(struct i2c_client *client,
chip = of_device_get_match_data(&client->dev);
if (!chip)
- chip = &chips[id->driver_data];
+ chip = &chips[i2c_match_id(ltc4306_id, client)->driver_data];
idle_disc = device_property_read_bool(&client->dev,
"i2c-mux-idle-disconnect");
@@ -310,7 +309,7 @@ static struct i2c_driver ltc4306_driver = {
.name = "ltc4306",
.of_match_table = of_match_ptr(ltc4306_of_match),
},
- .probe = ltc4306_probe,
+ .probe_new = ltc4306_probe,
.remove = ltc4306_remove,
.id_table = ltc4306_id,
};
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 09bafd3e68fa..fbc748027087 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -36,6 +36,7 @@
*/
#include <linux/device.h>
+#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
@@ -373,7 +374,6 @@ static int pca954x_probe(struct i2c_client *client,
int num, force, class;
struct i2c_mux_core *muxc;
struct pca954x *data;
- const struct of_device_id *match;
int ret;
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
@@ -389,15 +389,19 @@ static int pca954x_probe(struct i2c_client *client,
i2c_set_clientdata(client, muxc);
data->client = client;
- /* Get the mux out of reset if a reset GPIO is specified. */
- gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW);
+ /* Reset the mux if a reset GPIO is specified. */
+ gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
+ if (gpio) {
+ udelay(1);
+ gpiod_set_value_cansleep(gpio, 0);
+ /* Give the chip some time to recover. */
+ udelay(1);
+ }
- match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
- if (match)
- data->chip = of_device_get_match_data(&client->dev);
- else
+ data->chip = of_device_get_match_data(&client->dev);
+ if (!data->chip)
data->chip = &chips[id->driver_data];
if (data->chip->id.manufacturer_id != I2C_DEVICE_ID_NONE) {
diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c
index f583f805fee9..5653295b01cd 100644
--- a/drivers/i2c/muxes/i2c-mux-reg.c
+++ b/drivers/i2c/muxes/i2c-mux-reg.c
@@ -127,10 +127,8 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux,
values = devm_kcalloc(&pdev->dev,
mux->data.n_values, sizeof(*mux->data.values),
GFP_KERNEL);
- if (!values) {
- dev_err(&pdev->dev, "Cannot allocate values array");
+ if (!values)
return -ENOMEM;
- }
for_each_child_of_node(np, child) {
of_property_read_u32(child, "reg", values + i);
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 3cf300072348..6d9f0abb2660 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -12,7 +12,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 55d19fd0994e..2a87b0d2f21f 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -19,7 +19,7 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
#include <linux/gpio/machine.h>
#include <linux/slab.h>
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 05ecf828b2ab..436e34705af1 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -30,8 +30,8 @@
#include <linux/timb_gpio.h>
#include <linux/i2c.h>
-#include <linux/i2c-ocores.h>
-#include <linux/i2c-xiic.h>
+#include <linux/platform_data/i2c-ocores.h>
+#include <linux/platform_data/i2c-xiic.h>
#include <linux/spi/spi.h>
#include <linux/spi/xilinx_spi.h>
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 33053b0d1fdf..f5cc517d1131 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -532,6 +532,45 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata)
return 0;
}
+static void at24_remove_dummy_clients(struct at24_data *at24)
+{
+ int i;
+
+ for (i = 1; i < at24->num_addresses; i++)
+ i2c_unregister_device(at24->client[i].client);
+}
+
+static int at24_make_dummy_client(struct at24_data *at24, unsigned int index,
+ struct regmap_config *regmap_config)
+{
+ struct i2c_client *base_client, *dummy_client;
+ unsigned short int addr;
+ struct regmap *regmap;
+ struct device *dev;
+
+ base_client = at24->client[0].client;
+ dev = &base_client->dev;
+ addr = base_client->addr + index;
+
+ dummy_client = i2c_new_dummy(base_client->adapter,
+ base_client->addr + index);
+ if (!dummy_client) {
+ dev_err(dev, "address 0x%02x unavailable\n", addr);
+ return -EADDRINUSE;
+ }
+
+ regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
+ if (IS_ERR(regmap)) {
+ i2c_unregister_device(dummy_client);
+ return PTR_ERR(regmap);
+ }
+
+ at24->client[index].client = dummy_client;
+ at24->client[index].regmap = regmap;
+
+ return 0;
+}
+
static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len)
{
if (flags & AT24_FLAG_MAC) {
@@ -637,20 +676,10 @@ static int at24_probe(struct i2c_client *client)
/* use dummy devices for multiple-address chips */
for (i = 1; i < num_addresses; i++) {
- at24->client[i].client = i2c_new_dummy(client->adapter,
- client->addr + i);
- if (!at24->client[i].client) {
- dev_err(dev, "address 0x%02x unavailable\n",
- client->addr + i);
- err = -EADDRINUSE;
- goto err_clients;
- }
- at24->client[i].regmap = devm_regmap_init_i2c(
- at24->client[i].client,
- &regmap_config);
- if (IS_ERR(at24->client[i].regmap)) {
- err = PTR_ERR(at24->client[i].regmap);
- goto err_clients;
+ err = at24_make_dummy_client(at24, i, &regmap_config);
+ if (err) {
+ at24_remove_dummy_clients(at24);
+ return err;
}
}
@@ -685,7 +714,7 @@ static int at24_probe(struct i2c_client *client)
nvmem_config.word_size = 1;
nvmem_config.size = pdata.byte_len;
- at24->nvmem = nvmem_register(&nvmem_config);
+ at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
if (IS_ERR(at24->nvmem)) {
err = PTR_ERR(at24->nvmem);
goto err_clients;
@@ -702,10 +731,7 @@ static int at24_probe(struct i2c_client *client)
return 0;
err_clients:
- for (i = 1; i < num_addresses; i++)
- if (at24->client[i].client)
- i2c_unregister_device(at24->client[i].client);
-
+ at24_remove_dummy_clients(at24);
pm_runtime_disable(dev);
return err;
@@ -714,15 +740,10 @@ err_clients:
static int at24_remove(struct i2c_client *client)
{
struct at24_data *at24;
- int i;
at24 = i2c_get_clientdata(client);
- nvmem_unregister(at24->nvmem);
-
- for (i = 1; i < at24->num_addresses; i++)
- i2c_unregister_device(at24->client[i].client);
-
+ at24_remove_dummy_clients(at24);
pm_runtime_disable(&client->dev);
pm_runtime_set_suspended(&client->dev);
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
deleted file mode 100644
index 5388326fbbff..000000000000
--- a/include/linux/i2c-pnx.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Header file for I2C support on PNX010x/4008.
- *
- * Author: Dennis Kovalev <dkovalev@ru.mvista.com>
- *
- * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __I2C_PNX_H__
-#define __I2C_PNX_H__
-
-struct platform_device;
-struct clk;
-
-struct i2c_pnx_mif {
- int ret; /* Return value */
- int mode; /* Interface mode */
- struct completion complete; /* I/O completion */
- struct timer_list timer; /* Timeout */
- u8 * buf; /* Data buffer */
- int len; /* Length of data buffer */
- int order; /* RX Bytes to order via TX */
-};
-
-struct i2c_pnx_algo_data {
- void __iomem *ioaddr;
- struct i2c_pnx_mif mif;
- int last;
- struct clk *clk;
- struct i2c_adapter adapter;
- int irq;
- u32 timeout;
-};
-
-#endif /* __I2C_PNX_H__ */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 44ad14e016b5..254cd34eeae2 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -394,7 +394,6 @@ static inline bool i2c_detect_slave_mode(struct device *dev) { return false; }
* @addr: stored in i2c_client.addr
* @dev_name: Overrides the default <busnr>-<addr> dev_name if set
* @platform_data: stored in i2c_client.dev.platform_data
- * @archdata: copied into i2c_client.dev.archdata
* @of_node: pointer to OpenFirmware device node
* @fwnode: device node supplied by the platform firmware
* @properties: additional device properties for the device
@@ -419,7 +418,6 @@ struct i2c_board_info {
unsigned short addr;
const char *dev_name;
void *platform_data;
- struct dev_archdata *archdata;
struct device_node *of_node;
struct fwnode_handle *fwnode;
const struct property_entry *properties;
@@ -903,6 +901,9 @@ extern const struct of_device_id
*i2c_of_match_device(const struct of_device_id *matches,
struct i2c_client *client);
+int of_i2c_get_board_info(struct device *dev, struct device_node *node,
+ struct i2c_board_info *info);
+
#else
static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
@@ -927,6 +928,13 @@ static inline const struct of_device_id
return NULL;
}
+static inline int of_i2c_get_board_info(struct device *dev,
+ struct device_node *node,
+ struct i2c_board_info *info)
+{
+ return -ENOTSUPP;
+}
+
#endif /* CONFIG_OF */
#if IS_ENABLED(CONFIG_ACPI)
diff --git a/include/linux/i2c-gpio.h b/include/linux/platform_data/i2c-gpio.h
index 352c1426fd4d..352c1426fd4d 100644
--- a/include/linux/i2c-gpio.h
+++ b/include/linux/platform_data/i2c-gpio.h
diff --git a/include/linux/i2c-mux-gpio.h b/include/linux/platform_data/i2c-mux-gpio.h
index 4406108201fe..4406108201fe 100644
--- a/include/linux/i2c-mux-gpio.h
+++ b/include/linux/platform_data/i2c-mux-gpio.h
diff --git a/include/linux/i2c-ocores.h b/include/linux/platform_data/i2c-ocores.h
index 01edd96fe1f7..01edd96fe1f7 100644
--- a/include/linux/i2c-ocores.h
+++ b/include/linux/platform_data/i2c-ocores.h
diff --git a/include/linux/i2c-omap.h b/include/linux/platform_data/i2c-omap.h
index 3444265ee8ee..3444265ee8ee 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/platform_data/i2c-omap.h
diff --git a/include/linux/i2c-pca-platform.h b/include/linux/platform_data/i2c-pca-platform.h
index c37329432a8e..c37329432a8e 100644
--- a/include/linux/i2c-pca-platform.h
+++ b/include/linux/platform_data/i2c-pca-platform.h
diff --git a/include/linux/i2c-xiic.h b/include/linux/platform_data/i2c-xiic.h
index 4f9f2256a97e..4f9f2256a97e 100644
--- a/include/linux/i2c-xiic.h
+++ b/include/linux/platform_data/i2c-xiic.h