summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/mailbox/Kconfig2
-rw-r--r--drivers/mailbox/bcm-flexrm-mailbox.c4
-rw-r--r--drivers/mailbox/mailbox-xgene-slimpro.c6
-rw-r--r--drivers/mailbox/mailbox.h2
-rw-r--r--drivers/mailbox/pcc.c2
-rw-r--r--drivers/mailbox/pl320-ipc.c2
-rw-r--r--drivers/mailbox/sprd-mailbox.c12
-rw-r--r--drivers/mailbox/ti-msgmgr.c2
8 files changed, 16 insertions, 16 deletions
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index f4abe3529acd..68de2c6af727 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -78,7 +78,7 @@ config OMAP_MBOX_KFIFO_SIZE
module parameter).
config ROCKCHIP_MBOX
- bool "Rockchip Soc Intergrated Mailbox Support"
+ bool "Rockchip Soc Integrated Mailbox Support"
depends on ARCH_ROCKCHIP || COMPILE_TEST
help
This driver provides support for inter-processor communication
diff --git a/drivers/mailbox/bcm-flexrm-mailbox.c b/drivers/mailbox/bcm-flexrm-mailbox.c
index bee33abb5308..b4f33dc399a0 100644
--- a/drivers/mailbox/bcm-flexrm-mailbox.c
+++ b/drivers/mailbox/bcm-flexrm-mailbox.c
@@ -423,7 +423,7 @@ static void flexrm_enqueue_desc(u32 nhpos, u32 nhcnt, u32 reqid,
*
* In general use, number of non-HEADER descriptors can easily go
* beyond 31. To tackle this situation, we have packet (or request)
- * extenstion bits (STARTPKT and ENDPKT) in the HEADER descriptor.
+ * extension bits (STARTPKT and ENDPKT) in the HEADER descriptor.
*
* To use packet extension, the first HEADER descriptor of request
* (or packet) will have STARTPKT=1 and ENDPKT=0. The intermediate
@@ -1095,7 +1095,7 @@ static int flexrm_process_completions(struct flexrm_ring *ring)
/*
* Get current completion read and write offset
*
- * Note: We should read completion write pointer atleast once
+ * Note: We should read completion write pointer at least once
* after we get a MSI interrupt because HW maintains internal
* MSI status which will allow next MSI interrupt only after
* completion write pointer is read.
diff --git a/drivers/mailbox/mailbox-xgene-slimpro.c b/drivers/mailbox/mailbox-xgene-slimpro.c
index de260799f1b9..5b3a2dcd5955 100644
--- a/drivers/mailbox/mailbox-xgene-slimpro.c
+++ b/drivers/mailbox/mailbox-xgene-slimpro.c
@@ -51,10 +51,10 @@ struct slimpro_mbox_chan {
/**
* X-Gene SlimPRO Mailbox controller data
*
- * X-Gene SlimPRO Mailbox controller has 8 commnunication channels.
- * Each channel has a separate IRQ number assgined to it.
+ * X-Gene SlimPRO Mailbox controller has 8 communication channels.
+ * Each channel has a separate IRQ number assigned to it.
*
- * @mb_ctrl: Representation of the commnunication channel controller
+ * @mb_ctrl: Representation of the communication channel controller
* @mc: Array of SlimPRO mailbox channels of the controller
* @chans: Array of mailbox communication channels
*
diff --git a/drivers/mailbox/mailbox.h b/drivers/mailbox/mailbox.h
index 4e3cc4426513..046d6d258b32 100644
--- a/drivers/mailbox/mailbox.h
+++ b/drivers/mailbox/mailbox.h
@@ -5,6 +5,6 @@
#define TXDONE_BY_IRQ BIT(0) /* controller has remote RTR irq */
#define TXDONE_BY_POLL BIT(1) /* controller can read status of last TX */
-#define TXDONE_BY_ACK BIT(2) /* S/W ACK recevied by Client ticks the TX */
+#define TXDONE_BY_ACK BIT(2) /* S/W ACK received by Client ticks the TX */
#endif /* __MAILBOX_H */
diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index 4b1a2d2a3d7b..0296558f9e22 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -32,7 +32,7 @@
* * Client writes WRITE cmd in communication region cmd address.
* * Client issues mbox_send_message() which rings the PCC doorbell
* for its PCC channel.
- * * If command completes, then writes have succeded and it can release
+ * * If command completes, then writes have succeeded and it can release
* the channel lock.
*
* There is a Nominal latency defined for each channel which indicates
diff --git a/drivers/mailbox/pl320-ipc.c b/drivers/mailbox/pl320-ipc.c
index 25e0b6f7a10f..fbcf07930390 100644
--- a/drivers/mailbox/pl320-ipc.c
+++ b/drivers/mailbox/pl320-ipc.c
@@ -73,7 +73,7 @@ static u32 __ipc_rcv(int mbox, u32 *data)
return data[1];
}
-/* blocking implmentation from the A9 side, not usuable in interrupts! */
+/* blocking implementation from the A9 side, not usable in interrupts! */
int pl320_ipc_transmit(u32 *data)
{
int ret;
diff --git a/drivers/mailbox/sprd-mailbox.c b/drivers/mailbox/sprd-mailbox.c
index 4c325301a2fe..56b34a67ff1a 100644
--- a/drivers/mailbox/sprd-mailbox.c
+++ b/drivers/mailbox/sprd-mailbox.c
@@ -25,28 +25,28 @@
#define SPRD_MBOX_LOCK 0x20
#define SPRD_MBOX_FIFO_DEPTH 0x24
-/* Bit and mask definiation for inbox's SPRD_MBOX_FIFO_STS register */
+/* Bit and mask definition for inbox's SPRD_MBOX_FIFO_STS register */
#define SPRD_INBOX_FIFO_DELIVER_MASK GENMASK(23, 16)
#define SPRD_INBOX_FIFO_OVERLOW_MASK GENMASK(15, 8)
#define SPRD_INBOX_FIFO_DELIVER_SHIFT 16
#define SPRD_INBOX_FIFO_BUSY_MASK GENMASK(7, 0)
-/* Bit and mask definiation for SPRD_MBOX_IRQ_STS register */
+/* Bit and mask definition for SPRD_MBOX_IRQ_STS register */
#define SPRD_MBOX_IRQ_CLR BIT(0)
-/* Bit and mask definiation for outbox's SPRD_MBOX_FIFO_STS register */
+/* Bit and mask definition for outbox's SPRD_MBOX_FIFO_STS register */
#define SPRD_OUTBOX_FIFO_FULL BIT(2)
#define SPRD_OUTBOX_FIFO_WR_SHIFT 16
#define SPRD_OUTBOX_FIFO_RD_SHIFT 24
#define SPRD_OUTBOX_FIFO_POS_MASK GENMASK(7, 0)
-/* Bit and mask definiation for inbox's SPRD_MBOX_IRQ_MSK register */
+/* Bit and mask definition for inbox's SPRD_MBOX_IRQ_MSK register */
#define SPRD_INBOX_FIFO_BLOCK_IRQ BIT(0)
#define SPRD_INBOX_FIFO_OVERFLOW_IRQ BIT(1)
#define SPRD_INBOX_FIFO_DELIVER_IRQ BIT(2)
#define SPRD_INBOX_FIFO_IRQ_MASK GENMASK(2, 0)
-/* Bit and mask definiation for outbox's SPRD_MBOX_IRQ_MSK register */
+/* Bit and mask definition for outbox's SPRD_MBOX_IRQ_MSK register */
#define SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ BIT(0)
#define SPRD_OUTBOX_FIFO_IRQ_MASK GENMASK(4, 0)
@@ -150,7 +150,7 @@ static irqreturn_t sprd_mbox_inbox_isr(int irq, void *data)
chan = &priv->chan[id];
/*
- * Check if the message was fetched by remote traget, if yes,
+ * Check if the message was fetched by remote target, if yes,
* that means the transmission has been completed.
*/
busy = fifo_sts & SPRD_INBOX_FIFO_BUSY_MASK;
diff --git a/drivers/mailbox/ti-msgmgr.c b/drivers/mailbox/ti-msgmgr.c
index 0130628f4d9d..efb43b038596 100644
--- a/drivers/mailbox/ti-msgmgr.c
+++ b/drivers/mailbox/ti-msgmgr.c
@@ -239,7 +239,7 @@ static irqreturn_t ti_msgmgr_queue_rx_interrupt(int irq, void *p)
/*
* I have no idea about the protocol being used to communicate with the
- * remote producer - 0 could be valid data, so I wont make a judgement
+ * remote producer - 0 could be valid data, so I won't make a judgement
* of how many bytes I should be reading. Let the client figure this
* out.. I just read the full message and pass it on..
*/