diff options
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 3 | ||||
-rw-r--r-- | drivers/input/joystick/xpad.c | 1 | ||||
-rw-r--r-- | drivers/input/mouse/elantech.c | 31 | ||||
-rw-r--r-- | drivers/input/serio/i8042-acpipnpio.h | 18 | ||||
-rw-r--r-- | drivers/input/touchscreen/ads7846.c | 12 | ||||
-rw-r--r-- | drivers/input/touchscreen/ili210x.c | 4 | ||||
-rw-r--r-- | drivers/pinctrl/bcm/pinctrl-bcm2835.c | 2 | ||||
-rw-r--r-- | drivers/pinctrl/core.c | 2 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-rockchip.c | 68 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-rockchip.h | 1 | ||||
-rw-r--r-- | drivers/pinctrl/pinctrl-tps6594.c | 1 | ||||
-rw-r--r-- | drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 | ||||
-rw-r--r-- | drivers/pinctrl/renesas/pinctrl-rzg2l.c | 4 | ||||
-rw-r--r-- | include/linux/workqueue.h | 2 | ||||
-rw-r--r-- | kernel/workqueue.c | 51 |
15 files changed, 161 insertions, 40 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 50846a2d09c8..0bf2d9f093b5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -29,7 +29,6 @@ properties: - qcom,pm7325-gpio - qcom,pm7550ba-gpio - qcom,pm8005-gpio - - qcom,pm8008-gpio - qcom,pm8018-gpio - qcom,pm8019-gpio - qcom,pm8038-gpio @@ -126,7 +125,6 @@ allOf: compatible: contains: enum: - - qcom,pm8008-gpio - qcom,pmi8950-gpio - qcom,pmr735d-gpio then: @@ -448,7 +446,6 @@ $defs: - gpio1-gpio10 for pm7325 - gpio1-gpio8 for pm7550ba - gpio1-gpio4 for pm8005 - - gpio1-gpio2 for pm8008 - gpio1-gpio6 for pm8018 - gpio1-gpio12 for pm8038 - gpio1-gpio40 for pm8058 diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 70f0654c58b6..2b8370ecf42a 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -209,6 +209,7 @@ static const struct xpad_device { { 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 }, { 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 }, { 0x0b05, 0x1a38, "ASUS ROG RAIKIRI", 0, XTYPE_XBOXONE }, + { 0x0b05, 0x1abb, "ASUS ROG RAIKIRI PRO", 0, XTYPE_XBOXONE }, { 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX }, { 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX }, diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 4e38229404b4..b4723ea395eb 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1477,15 +1477,46 @@ static void elantech_disconnect(struct psmouse *psmouse) } /* + * Some hw_version 4 models fail to properly activate absolute mode on + * resume without going through disable/enable cycle. + */ +static const struct dmi_system_id elantech_needs_reenable[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + /* Lenovo N24 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "81AF"), + }, + }, +#endif + { } +}; + +/* * Put the touchpad back into absolute mode when reconnecting */ static int elantech_reconnect(struct psmouse *psmouse) { + int err; + psmouse_reset(psmouse); if (elantech_detect(psmouse, 0)) return -1; + if (dmi_check_system(elantech_needs_reenable)) { + err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE); + if (err) + psmouse_warn(psmouse, "failed to deactivate mouse on %s: %d\n", + psmouse->ps2dev.serio->phys, err); + + err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); + if (err) + psmouse_warn(psmouse, "failed to reactivate mouse on %s: %d\n", + psmouse->ps2dev.serio->phys, err); + } + if (elantech_set_absolute_mode(psmouse)) { psmouse_err(psmouse, "failed to put touchpad back into absolute mode.\n"); diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index dfc6c581873b..5b50475ec414 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -76,7 +76,7 @@ static inline void i8042_write_command(int val) #define SERIO_QUIRK_PROBE_DEFER BIT(5) #define SERIO_QUIRK_RESET_ALWAYS BIT(6) #define SERIO_QUIRK_RESET_NEVER BIT(7) -#define SERIO_QUIRK_DIECT BIT(8) +#define SERIO_QUIRK_DIRECT BIT(8) #define SERIO_QUIRK_DUMBKBD BIT(9) #define SERIO_QUIRK_NOLOOP BIT(10) #define SERIO_QUIRK_NOTIMEOUT BIT(11) @@ -1332,6 +1332,20 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, + { + /* + * The Ayaneo Kun is a handheld device where some the buttons + * are handled by an AT keyboard. The keyboard is usually + * detected as raw, but sometimes, usually after a cold boot, + * it is detected as translated. Make sure that the keyboard + * is always in raw mode. + */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AYANEO"), + DMI_MATCH(DMI_BOARD_NAME, "KUN"), + }, + .driver_data = (void *)(SERIO_QUIRK_DIRECT) + }, { } }; @@ -1655,7 +1669,7 @@ static void __init i8042_check_quirks(void) if (quirks & SERIO_QUIRK_RESET_NEVER) i8042_reset = I8042_RESET_NEVER; } - if (quirks & SERIO_QUIRK_DIECT) + if (quirks & SERIO_QUIRK_DIRECT) i8042_direct = true; if (quirks & SERIO_QUIRK_DUMBKBD) i8042_dumbkbd = true; diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index d2bbb436a77d..4d13db13b9e5 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1111,6 +1111,16 @@ static const struct of_device_id ads7846_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, ads7846_dt_ids); +static const struct spi_device_id ads7846_spi_ids[] = { + { "tsc2046", 7846 }, + { "ads7843", 7843 }, + { "ads7845", 7845 }, + { "ads7846", 7846 }, + { "ads7873", 7873 }, + { }, +}; +MODULE_DEVICE_TABLE(spi, ads7846_spi_ids); + static const struct ads7846_platform_data *ads7846_get_props(struct device *dev) { struct ads7846_platform_data *pdata; @@ -1386,10 +1396,10 @@ static struct spi_driver ads7846_driver = { }, .probe = ads7846_probe, .remove = ads7846_remove, + .id_table = ads7846_spi_ids, }; module_spi_driver(ads7846_driver); MODULE_DESCRIPTION("ADS7846 TouchScreen Driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("spi:ads7846"); diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c index 31ffdc2a93f3..79bdb2b10949 100644 --- a/drivers/input/touchscreen/ili210x.c +++ b/drivers/input/touchscreen/ili210x.c @@ -261,8 +261,8 @@ static int ili251x_read_touch_data(struct i2c_client *client, u8 *data) if (!error && data[0] == 2) { error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1, ILI251X_DATA_SIZE2); - if (error >= 0 && error != ILI251X_DATA_SIZE2) - error = -EIO; + if (error >= 0) + error = error == ILI251X_DATA_SIZE2 ? 0 : -EIO; } return error; diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c index 7178a38475cc..27fd54795791 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -245,7 +245,7 @@ static const char * const irq_type_names[] = { }; static bool persist_gpio_outputs; -module_param(persist_gpio_outputs, bool, 0644); +module_param(persist_gpio_outputs, bool, 0444); MODULE_PARM_DESC(persist_gpio_outputs, "Enable GPIO_OUT persistence when pin is freed"); static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index cffeb869130d..f424a57f0013 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1106,8 +1106,8 @@ static struct pinctrl *create_pinctrl(struct device *dev, * an -EPROBE_DEFER later, as that is the worst case. */ if (ret == -EPROBE_DEFER) { - pinctrl_free(p, false); mutex_unlock(&pinctrl_maps_mutex); + pinctrl_free(p, false); return ERR_PTR(ret); } } diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 3bedf36a0019..3f56991f5b89 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -634,23 +634,68 @@ static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = { static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = { { - .num = 2, - .pin = 12, - .reg = 0x24, - .bit = 8, - .mask = 0x3 - }, { + /* gpio2_b7_sel */ .num = 2, .pin = 15, .reg = 0x28, .bit = 0, .mask = 0x7 }, { + /* gpio2_c7_sel */ .num = 2, .pin = 23, .reg = 0x30, .bit = 14, .mask = 0x3 + }, { + /* gpio3_b1_sel */ + .num = 3, + .pin = 9, + .reg = 0x44, + .bit = 2, + .mask = 0x3 + }, { + /* gpio3_b2_sel */ + .num = 3, + .pin = 10, + .reg = 0x44, + .bit = 4, + .mask = 0x3 + }, { + /* gpio3_b3_sel */ + .num = 3, + .pin = 11, + .reg = 0x44, + .bit = 6, + .mask = 0x3 + }, { + /* gpio3_b4_sel */ + .num = 3, + .pin = 12, + .reg = 0x44, + .bit = 8, + .mask = 0x3 + }, { + /* gpio3_b5_sel */ + .num = 3, + .pin = 13, + .reg = 0x44, + .bit = 10, + .mask = 0x3 + }, { + /* gpio3_b6_sel */ + .num = 3, + .pin = 14, + .reg = 0x44, + .bit = 12, + .mask = 0x3 + }, { + /* gpio3_b7_sel */ + .num = 3, + .pin = 15, + .reg = 0x44, + .bit = 14, + .mask = 0x3 }, }; @@ -2433,6 +2478,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num) case RK3188: case RK3288: case RK3308: + case RK3328: case RK3368: case RK3399: case RK3568: @@ -2491,6 +2537,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, case RK3188: case RK3288: case RK3308: + case RK3328: case RK3368: case RK3399: case RK3568: @@ -2704,8 +2751,10 @@ static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned selector, if (ret) { /* revert the already done pin settings */ - for (cnt--; cnt >= 0; cnt--) + for (cnt--; cnt >= 0; cnt--) { + bank = pin_to_bank(info, pins[cnt]); rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0); + } return ret; } @@ -2753,6 +2802,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, case RK3188: case RK3288: case RK3308: + case RK3328: case RK3368: case RK3399: case RK3568: @@ -3763,7 +3813,7 @@ static struct rockchip_pin_bank rk3328_pin_banks[] = { PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, - IOMUX_WIDTH_3BIT, + 0, IOMUX_WIDTH_3BIT, 0), PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", @@ -3777,7 +3827,7 @@ static struct rockchip_pin_ctrl rk3328_pin_ctrl = { .pin_banks = rk3328_pin_banks, .nr_banks = ARRAY_SIZE(rk3328_pin_banks), .label = "RK3328-GPIO", - .type = RK3288, + .type = RK3328, .grf_mux_offset = 0x0, .iomux_recalced = rk3328_mux_recalced_data, .niomux_recalced = ARRAY_SIZE(rk3328_mux_recalced_data), diff --git a/drivers/pinctrl/pinctrl-rockchip.h b/drivers/pinctrl/pinctrl-rockchip.h index 4759f336941e..849266f8b191 100644 --- a/drivers/pinctrl/pinctrl-rockchip.h +++ b/drivers/pinctrl/pinctrl-rockchip.h @@ -193,6 +193,7 @@ enum rockchip_pinctrl_type { RK3188, RK3288, RK3308, + RK3328, RK3368, RK3399, RK3568, diff --git a/drivers/pinctrl/pinctrl-tps6594.c b/drivers/pinctrl/pinctrl-tps6594.c index 085047320853..5e7c7cf93445 100644 --- a/drivers/pinctrl/pinctrl-tps6594.c +++ b/drivers/pinctrl/pinctrl-tps6594.c @@ -486,6 +486,7 @@ static int tps6594_pinctrl_probe(struct platform_device *pdev) break; case TPS6593: case TPS6594: + case LP8764: pctrl_desc->pins = tps6594_pins; pctrl_desc->npins = ARRAY_SIZE(tps6594_pins); diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 4e80c7204e5f..4abd6f18bbef 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1207,7 +1207,6 @@ static const struct of_device_id pmic_gpio_of_match[] = { { .compatible = "qcom,pm7325-gpio", .data = (void *) 10 }, { .compatible = "qcom,pm7550ba-gpio", .data = (void *) 8}, { .compatible = "qcom,pm8005-gpio", .data = (void *) 4 }, - { .compatible = "qcom,pm8008-gpio", .data = (void *) 2 }, { .compatible = "qcom,pm8019-gpio", .data = (void *) 6 }, /* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */ { .compatible = "qcom,pm8150-gpio", .data = (void *) 10 }, diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c index c3256bfde502..60be78da9f52 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -2071,11 +2071,11 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl) * This has to be atomically executed to protect against a concurrent * interrupt. */ - raw_spin_lock_irqsave(&pctrl->lock.rlock, flags); + spin_lock_irqsave(&pctrl->lock, flags); ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data)); if (!ret && !irqd_irq_disabled(data)) rzg2l_gpio_irq_enable(data); - raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags); + spin_unlock_irqrestore(&pctrl->lock, flags); if (ret) dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq); diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index fb3993894536..d9968bfc8eac 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -95,7 +95,7 @@ enum wq_misc_consts { WORK_BUSY_RUNNING = 1 << 1, /* maximum string length for set_worker_desc() */ - WORKER_DESC_LEN = 24, + WORKER_DESC_LEN = 32, }; /* Convenience constants - of type 'unsigned long', not 'enum'! */ diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 003474c9a77d..3fbaecfc88c2 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -125,6 +125,7 @@ enum wq_internal_consts { HIGHPRI_NICE_LEVEL = MIN_NICE, WQ_NAME_LEN = 32, + WORKER_ID_LEN = 10 + WQ_NAME_LEN, /* "kworker/R-" + WQ_NAME_LEN */ }; /* @@ -2742,6 +2743,26 @@ static void worker_detach_from_pool(struct worker *worker) complete(detach_completion); } +static int format_worker_id(char *buf, size_t size, struct worker *worker, + struct worker_pool *pool) +{ + if (worker->rescue_wq) + return scnprintf(buf, size, "kworker/R-%s", + worker->rescue_wq->name); + + if (pool) { + if (pool->cpu >= 0) + return scnprintf(buf, size, "kworker/%d:%d%s", + pool->cpu, worker->id, + pool->attrs->nice < 0 ? "H" : ""); + else + return scnprintf(buf, size, "kworker/u%d:%d", + pool->id, worker->id); + } else { + return scnprintf(buf, size, "kworker/dying"); + } +} + /** * create_worker - create a new workqueue worker * @pool: pool the new worker will belong to @@ -2758,7 +2779,6 @@ static struct worker *create_worker(struct worker_pool *pool) { struct worker *worker; int id; - char id_buf[23]; /* ID is needed to determine kthread name */ id = ida_alloc(&pool->worker_ida, GFP_KERNEL); @@ -2777,17 +2797,14 @@ static struct worker *create_worker(struct worker_pool *pool) worker->id = id; if (!(pool->flags & POOL_BH)) { - if (pool->cpu >= 0) - snprintf(id_buf, sizeof(id_buf), "%d:%d%s", pool->cpu, id, - pool->attrs->nice < 0 ? "H" : ""); - else - snprintf(id_buf, sizeof(id_buf), "u%d:%d", pool->id, id); + char id_buf[WORKER_ID_LEN]; + format_worker_id(id_buf, sizeof(id_buf), worker, pool); worker->task = kthread_create_on_node(worker_thread, worker, - pool->node, "kworker/%s", id_buf); + pool->node, "%s", id_buf); if (IS_ERR(worker->task)) { if (PTR_ERR(worker->task) == -EINTR) { - pr_err("workqueue: Interrupted when creating a worker thread \"kworker/%s\"\n", + pr_err("workqueue: Interrupted when creating a worker thread \"%s\"\n", id_buf); } else { pr_err_once("workqueue: Failed to create a worker thread: %pe", @@ -3350,7 +3367,6 @@ woke_up: raw_spin_unlock_irq(&pool->lock); set_pf_worker(false); - set_task_comm(worker->task, "kworker/dying"); ida_free(&pool->worker_ida, worker->id); worker_detach_from_pool(worker); WARN_ON_ONCE(!list_empty(&worker->entry)); @@ -5542,6 +5558,7 @@ static int wq_clamp_max_active(int max_active, unsigned int flags, static int init_rescuer(struct workqueue_struct *wq) { struct worker *rescuer; + char id_buf[WORKER_ID_LEN]; int ret; if (!(wq->flags & WQ_MEM_RECLAIM)) @@ -5555,7 +5572,9 @@ static int init_rescuer(struct workqueue_struct *wq) } rescuer->rescue_wq = wq; - rescuer->task = kthread_create(rescuer_thread, rescuer, "kworker/R-%s", wq->name); + format_worker_id(id_buf, sizeof(id_buf), rescuer, NULL); + + rescuer->task = kthread_create(rescuer_thread, rescuer, "%s", id_buf); if (IS_ERR(rescuer->task)) { ret = PTR_ERR(rescuer->task); pr_err("workqueue: Failed to create a rescuer kthread for wq \"%s\": %pe", @@ -6384,19 +6403,15 @@ void show_freezable_workqueues(void) /* used to show worker information through /proc/PID/{comm,stat,status} */ void wq_worker_comm(char *buf, size_t size, struct task_struct *task) { - int off; - - /* always show the actual comm */ - off = strscpy(buf, task->comm, size); - if (off < 0) - return; - /* stabilize PF_WQ_WORKER and worker pool association */ mutex_lock(&wq_pool_attach_mutex); if (task->flags & PF_WQ_WORKER) { struct worker *worker = kthread_data(task); struct worker_pool *pool = worker->pool; + int off; + + off = format_worker_id(buf, size, worker, pool); if (pool) { raw_spin_lock_irq(&pool->lock); @@ -6415,6 +6430,8 @@ void wq_worker_comm(char *buf, size_t size, struct task_struct *task) } raw_spin_unlock_irq(&pool->lock); } + } else { + strscpy(buf, task->comm, size); } mutex_unlock(&wq_pool_attach_mutex); |