summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--tools/testing/selftests/netfilter/Makefile2
-rwxr-xr-xtools/testing/selftests/netfilter/conntrack_icmp_related.sh283
2 files changed, 284 insertions, 1 deletions
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index c9ff2b47bd1c..a37cb1192c6a 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for netfilter selftests
-TEST_PROGS := nft_trans_stress.sh nft_nat.sh
+TEST_PROGS := nft_trans_stress.sh nft_nat.sh conntrack_icmp_related.sh
include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
new file mode 100755
index 000000000000..b48e1833bc89
--- /dev/null
+++ b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+#
+# check that ICMP df-needed/pkttoobig icmp are set are set as related
+# state
+#
+# Setup is:
+#
+# nsclient1 -> nsrouter1 -> nsrouter2 -> nsclient2
+# MTU 1500, except for nsrouter2 <-> nsclient2 link (1280).
+# ping nsclient2 from nsclient1, checking that conntrack did set RELATED
+# 'fragmentation needed' icmp packet.
+#
+# In addition, nsrouter1 will perform IP masquerading, i.e. also
+# check the icmp errors are propagated to the correct host as per
+# nat of "established" icmp-echo "connection".
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without nft tool"
+ exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+cleanup() {
+ for i in 1 2;do ip netns del nsclient$i;done
+ for i in 1 2;do ip netns del nsrouter$i;done
+}
+
+ipv4() {
+ echo -n 192.168.$1.2
+}
+
+ipv6 () {
+ echo -n dead:$1::2
+}
+
+check_counter()
+{
+ ns=$1
+ name=$2
+ expect=$3
+ local lret=0
+
+ cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect")
+ if [ $? -ne 0 ]; then
+ echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2
+ ip netns exec $ns nft list counter inet filter "$name" 1>&2
+ lret=1
+ fi
+
+ return $lret
+}
+
+check_unknown()
+{
+ expect="packets 0 bytes 0"
+ for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
+ check_counter $n "unknown" "$expect"
+ if [ $? -ne 0 ] ;then
+ return 1
+ fi
+ done
+
+ return 0
+}
+
+for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
+ ip netns add $n
+ ip -net $n link set lo up
+done
+
+DEV=veth0
+ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1
+DEV=veth0
+ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2
+
+DEV=veth0
+ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2
+
+DEV=veth0
+for i in 1 2; do
+ ip -net nsclient$i link set $DEV up
+ ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV
+ ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV
+done
+
+ip -net nsrouter1 link set eth1 up
+ip -net nsrouter1 link set veth0 up
+
+ip -net nsrouter2 link set eth1 up
+ip -net nsrouter2 link set eth2 up
+
+ip -net nsclient1 route add default via 192.168.1.1
+ip -net nsclient1 -6 route add default via dead:1::1
+
+ip -net nsclient2 route add default via 192.168.2.1
+ip -net nsclient2 route add default via dead:2::1
+
+i=3
+ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1
+ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0
+ip -net nsrouter1 addr add dead:1::1/64 dev eth1
+ip -net nsrouter1 addr add dead:3::1/64 dev veth0
+ip -net nsrouter1 route add default via 192.168.3.10
+ip -net nsrouter1 -6 route add default via dead:3::10
+
+ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1
+ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2
+ip -net nsrouter2 addr add dead:2::1/64 dev eth1
+ip -net nsrouter2 addr add dead:3::10/64 dev eth2
+ip -net nsrouter2 route add default via 192.168.3.1
+ip -net nsrouter2 route add default via dead:3::1
+
+sleep 2
+for i in 4 6; do
+ ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1
+ ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1
+done
+
+for netns in nsrouter1 nsrouter2; do
+ip netns exec $netns nft -f - <<EOF
+table inet filter {
+ counter unknown { }
+ counter related { }
+ chain forward {
+ type filter hook forward priority 0; policy accept;
+ meta l4proto icmpv6 icmpv6 type "packet-too-big" ct state "related" counter name "related" accept
+ meta l4proto icmp icmp type "destination-unreachable" ct state "related" counter name "related" accept
+ meta l4proto { icmp, icmpv6 } ct state new,established accept
+ counter name "unknown" drop
+ }
+}
+EOF
+done
+
+ip netns exec nsclient1 nft -f - <<EOF
+table inet filter {
+ counter unknown { }
+ counter related { }
+ chain input {
+ type filter hook input priority 0; policy accept;
+ meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+ meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept
+ counter name "unknown" drop
+ }
+}
+EOF
+
+ip netns exec nsclient2 nft -f - <<EOF
+table inet filter {
+ counter unknown { }
+ counter new { }
+ counter established { }
+
+ chain input {
+ type filter hook input priority 0; policy accept;
+ meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+ meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" accept
+ meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" accept
+ counter name "unknown" drop
+ }
+ chain output {
+ type filter hook output priority 0; policy accept;
+ meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+ meta l4proto { icmp, icmpv6 } ct state "new" counter name "new"
+ meta l4proto { icmp, icmpv6 } ct state "established" counter name "established"
+ counter name "unknown" drop
+ }
+}
+EOF
+
+
+# make sure NAT core rewrites adress of icmp error if nat is used according to
+# conntrack nat information (icmp error will be directed at nsrouter1 address,
+# but it needs to be routed to nsclient1 address).
+ip netns exec nsrouter1 nft -f - <<EOF
+table ip nat {
+ chain postrouting {
+ type nat hook postrouting priority 0; policy accept;
+ ip protocol icmp oifname "veth0" counter masquerade
+ }
+}
+table ip6 nat {
+ chain postrouting {
+ type nat hook postrouting priority 0; policy accept;
+ ip6 nexthdr icmpv6 oifname "veth0" counter masquerade
+ }
+}
+EOF
+
+ip netns exec nsrouter2 ip link set eth1 mtu 1280
+ip netns exec nsclient2 ip link set veth0 mtu 1280
+sleep 1
+
+ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null
+if [ $? -ne 0 ]; then
+ echo "ERROR: netns ip routing/connectivity broken" 1>&2
+ cleanup
+ exit 1
+fi
+ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null
+if [ $? -ne 0 ]; then
+ echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2
+ cleanup
+ exit 1
+fi
+
+check_unknown
+if [ $? -ne 0 ]; then
+ ret=1
+fi
+
+expect="packets 0 bytes 0"
+for netns in nsrouter1 nsrouter2 nsclient1;do
+ check_counter "$netns" "related" "$expect"
+ if [ $? -ne 0 ]; then
+ ret=1
+ fi
+done
+
+expect="packets 2 bytes 2076"
+check_counter nsclient2 "new" "$expect"
+if [ $? -ne 0 ]; then
+ ret=1
+fi
+
+ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null
+if [ $? -eq 0 ]; then
+ echo "ERROR: ping should have failed with PMTU too big error" 1>&2
+ ret=1
+fi
+
+# nsrouter2 should have generated the icmp error, so
+# related counter should be 0 (its in forward).
+expect="packets 0 bytes 0"
+check_counter "nsrouter2" "related" "$expect"
+if [ $? -ne 0 ]; then
+ ret=1
+fi
+
+# but nsrouter1 should have seen it, same for nsclient1.
+expect="packets 1 bytes 576"
+for netns in nsrouter1 nsclient1;do
+ check_counter "$netns" "related" "$expect"
+ if [ $? -ne 0 ]; then
+ ret=1
+ fi
+done
+
+ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null
+if [ $? -eq 0 ]; then
+ echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2
+ ret=1
+fi
+
+expect="packets 2 bytes 1856"
+for netns in nsrouter1 nsclient1;do
+ check_counter "$netns" "related" "$expect"
+ if [ $? -ne 0 ]; then
+ ret=1
+ fi
+done
+
+if [ $ret -eq 0 ];then
+ echo "PASS: icmp mtu error had RELATED state"
+else
+ echo "ERROR: icmp error RELATED state test has failed"
+fi
+
+cleanup
+exit $ret