diff options
| -rw-r--r-- | MAINTAINERS | 8 | ||||
| -rw-r--r-- | drivers/usb/host/Kconfig | 20 | ||||
| -rw-r--r-- | drivers/usb/host/Makefile | 1 |
3 files changed, 29 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index e93b7b9deeea..f71212eb845e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3481,6 +3481,14 @@ S: Supported F: Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml F: drivers/i2c/busses/i2c-brcmstb.c +BROADCOM BRCMSTB USB EHCI DRIVER +M: Al Cooper <alcooperx@gmail.com> +L: linux-usb@vger.kernel.org +L: bcm-kernel-feedback-list@broadcom.com +S: Maintained +F: Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml +F: drivers/usb/host/ehci-brcm.* + BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER M: Al Cooper <alcooperx@gmail.com> L: linux-kernel@vger.kernel.org diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 55bdfdf11e4c..973386bbb522 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -97,6 +97,26 @@ config USB_XHCI_TEGRA endif # USB_XHCI_HCD +config USB_EHCI_BRCMSTB + tristate + +config USB_BRCMSTB + tristate "Broadcom STB USB support" + depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST + select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD + select USB_EHCI_BRCMSTB if USB_EHCI_HCD + select USB_XHCI_PLATFORM if USB_XHCI_HCD + help + Enables support for XHCI, EHCI and OHCI host controllers + found in Broadcom STB SoC's. + + To compile these drivers as modules, choose M here: the + modules will be called ohci-platform.ko, ehci-brcm.ko and + xhci-plat-hcd.ko + + Disabling this will keep the controllers and corresponding + PHYs powered down. + config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" depends on HAS_DMA && HAS_IOMEM diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index b191361257cc..8782956e89ae 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o +obj-$(CONFIG_USB_EHCI_BRCMSTB) += ehci-brcm.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o |