diff options
| -rw-r--r-- | drivers/regulator/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 2 | ||||
| -rw-r--r-- | drivers/regulator/max5970-regulator.c (renamed from drivers/regulator/max597x-regulator.c) | 28 |
3 files changed, 18 insertions, 18 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index bf4b5b07e09e..086596239356 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -546,11 +546,11 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. -config REGULATOR_MAX597X - tristate "Maxim 597x power switch and monitor" +config REGULATOR_MAX5970 + tristate "Maxim 5970/5978 power switch and monitor" depends on I2C depends on OF - depends on MFD_MAX597X + depends on MFD_MAX5970 help This driver controls a Maxim 5970/5978 switch via I2C bus. The MAX5970/5978 is a smart switch with no output regulation, but diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 67468cfcc4f3..08727557b402 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -67,7 +67,7 @@ obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o -obj-$(CONFIG_REGULATOR_MAX597X) += max597x-regulator.o +obj-$(CONFIG_REGULATOR_MAX5970) += max5970-regulator.o obj-$(CONFIG_REGULATOR_MAX77541) += max77541-regulator.o obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o diff --git a/drivers/regulator/max597x-regulator.c b/drivers/regulator/max5970-regulator.c index 7873a5267555..b56a174cde3d 100644 --- a/drivers/regulator/max597x-regulator.c +++ b/drivers/regulator/max5970-regulator.c @@ -20,9 +20,9 @@ #include <linux/regulator/of_regulator.h> #include <linux/platform_device.h> -#include <linux/mfd/max597x.h> +#include <linux/mfd/max5970.h> -struct max597x_regulator { +struct max5970_regulator { int num_switches, mon_rng, irng, shunt_micro_ohms, lim_uA; struct regmap *regmap; }; @@ -58,7 +58,7 @@ static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity, bool enable, bool overvoltage) { int off_h, off_l, reg, ret; - struct max597x_regulator *data = rdev_get_drvdata(rdev); + struct max5970_regulator *data = rdev_get_drvdata(rdev); int channel = rdev_get_id(rdev); if (overvoltage) { @@ -140,7 +140,7 @@ static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA, int val, reg; unsigned int vthst, vthfst; - struct max597x_regulator *data = rdev_get_drvdata(rdev); + struct max5970_regulator *data = rdev_get_drvdata(rdev); int rdev_id = rdev_get_id(rdev); /* * MAX5970 doesn't has enable control for ocp. @@ -222,7 +222,7 @@ static int max597x_dt_parse(struct device_node *np, const struct regulator_desc *desc, struct regulator_config *cfg) { - struct max597x_regulator *data = cfg->driver_data; + struct max5970_regulator *data = cfg->driver_data; int ret = 0; ret = @@ -274,7 +274,7 @@ static int max597x_irq_handler(int irq, struct regulator_irq_data *rid, unsigned long *dev_mask) { struct regulator_err_state *stat; - struct max597x_regulator *d = (struct max597x_regulator *)rid->data; + struct max5970_regulator *d = (struct max5970_regulator *)rid->data; int val, ret, i; ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val); @@ -394,7 +394,7 @@ static int max597x_adc_range(struct regmap *regmap, const int ch, static int max597x_setup_irq(struct device *dev, int irq, struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES], - int num_switches, struct max597x_regulator *data) + int num_switches, struct max5970_regulator *data) { struct regulator_irq_desc max597x_notif = { .name = "max597x-irq", @@ -425,9 +425,9 @@ static int max597x_setup_irq(struct device *dev, static int max597x_regulator_probe(struct platform_device *pdev) { - struct max597x_data *max597x; + struct max5970_data *max597x; struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL); - struct max597x_regulator *data; + struct max5970_regulator *data; struct i2c_client *i2c = to_i2c_client(pdev->dev.parent); struct regulator_config config = { }; struct regulator_dev *rdev; @@ -438,16 +438,16 @@ static int max597x_regulator_probe(struct platform_device *pdev) if (!regmap) return -EPROBE_DEFER; - max597x = devm_kzalloc(&i2c->dev, sizeof(struct max597x_data), GFP_KERNEL); + max597x = devm_kzalloc(&i2c->dev, sizeof(struct max5970_data), GFP_KERNEL); if (!max597x) return -ENOMEM; i2c_set_clientdata(i2c, max597x); if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5978")) - max597x->num_switches = MAX597x_TYPE_MAX5978; + max597x->num_switches = MAX5978_NUM_SWITCHES; else if (of_device_is_compatible(i2c->dev.of_node, "maxim,max5970")) - max597x->num_switches = MAX597x_TYPE_MAX5970; + max597x->num_switches = MAX5970_NUM_SWITCHES; else return -ENODEV; @@ -456,7 +456,7 @@ static int max597x_regulator_probe(struct platform_device *pdev) for (i = 0; i < num_switches; i++) { data = - devm_kzalloc(&i2c->dev, sizeof(struct max597x_regulator), + devm_kzalloc(&i2c->dev, sizeof(struct max5970_regulator), GFP_KERNEL); if (!data) return -ENOMEM; @@ -500,7 +500,7 @@ static int max597x_regulator_probe(struct platform_device *pdev) static struct platform_driver max597x_regulator_driver = { .driver = { - .name = "max597x-regulator", + .name = "max5970-regulator", .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, .probe = max597x_regulator_probe, |