summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/regulator/max8997-regulator.txt1
-rw-r--r--Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt3
-rw-r--r--Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml69
-rw-r--r--Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml5
-rw-r--r--Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml17
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt2
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml30
-rw-r--r--Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml35
-rw-r--r--MAINTAINERS4
-rw-r--r--arch/arm64/boot/dts/qcom/qrb5165-rb5.dts9
-rw-r--r--drivers/mfd/ab8500-core.c1
-rw-r--r--drivers/regulator/Kconfig51
-rw-r--r--drivers/regulator/Makefile5
-rw-r--r--drivers/regulator/ab3100.c724
-rw-r--r--drivers/regulator/ab8500-ext.c422
-rw-r--r--drivers/regulator/ab8500.c116
-rw-r--r--drivers/regulator/atc260x-regulator.c539
-rw-r--r--drivers/regulator/axp20x-regulator.c7
-rw-r--r--drivers/regulator/bd70528-regulator.c11
-rw-r--r--drivers/regulator/bd71828-regulator.c13
-rw-r--r--drivers/regulator/bd718x7-regulator.c20
-rw-r--r--drivers/regulator/core.c18
-rw-r--r--drivers/regulator/mcp16502.c2
-rw-r--r--drivers/regulator/mt6315-regulator.c299
-rw-r--r--drivers/regulator/mtk-dvfsrc-regulator.c215
-rw-r--r--drivers/regulator/pca9450-regulator.c22
-rw-r--r--drivers/regulator/pf8x00-regulator.c278
-rw-r--r--drivers/regulator/qcom-labibb-regulator.c728
-rw-r--r--drivers/regulator/qcom-rpmh-regulator.c34
-rw-r--r--drivers/regulator/rohm-regulator.c9
-rw-r--r--drivers/regulator/rt4831-regulator.c198
-rw-r--r--drivers/regulator/s5m8767.c15
-rw-r--r--include/linux/mfd/abx500/ab8500.h3
-rw-r--r--include/linux/mfd/rohm-generic.h14
-rw-r--r--include/linux/regulator/ab8500.h166
-rw-r--r--include/linux/regulator/mt6315-regulator.h44
-rw-r--r--include/linux/regulator/pca9450.h7
-rw-r--r--lib/linear_ranges.c8
38 files changed, 2661 insertions, 1483 deletions
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 6fe825b8ac1b..b53c5e2b335f 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -35,6 +35,7 @@ Optional properties:
- interrupts: Interrupt specifiers for two interrupt sources.
- First interrupt specifier is for 'irq1' interrupt.
- Second interrupt specifier is for 'alert' interrupt.
+- charger-supply: regulator node for charging current.
- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
index d86584ed4d93..451cc4e86b01 100644
--- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
@@ -4,7 +4,8 @@ Required properties:
- compatible: "microchip,mcp16502"
- reg: I2C slave address
- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
- suspend-to-ram, keeping the PMIC into HIBERNATE mode.
+ suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
+ property is optional;
- regulators: A node that houses a sub-node for each regulator within
the device. Each sub-node is identified using the node's
name. The content of each sub-node is defined by the
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
new file mode 100644
index 000000000000..61dd5af80db6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6315-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6315 Regulator
+
+maintainers:
+ - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |
+ The MT6315 is a power management IC (PMIC) configurable with SPMI.
+ that contains 4 BUCKs output which can combine with each other
+ by different efuse settings.
+
+properties:
+ compatible:
+ const: mediatek,mt6315-regulator
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description: List of regulators and its properties
+
+ patternProperties:
+ "^vbuck[1-4]$":
+ type: object
+ $ref: "regulator.yaml#"
+
+ properties:
+ regulator-name:
+ pattern: "^vbuck[1-4]$"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic@6 {
+ compatible = "mediatek,mt6315-regulator";
+ reg = <0x6 0>;
+
+ regulators {
+ vbuck1 {
+ regulator-compatible = "vbuck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ };
+
+ vbuck3 {
+ regulator-compatible = "vbuck3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-enable-ramp-delay = <256>;
+ regulator-allowed-modes = <0 1 2 4>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index c2b0a8b6da1e..f70f2e758a00 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -87,6 +87,11 @@ properties:
additionalProperties: false
+ sd-vsel-gpios:
+ description: GPIO that is used to switch LDO5 between being configured by
+ LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is
+ connected to a host GPIO.
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
index 956156fe52a3..8761437ed8ad 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -62,8 +62,11 @@ properties:
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 2100
maximum: 4500
+ deprecated: true
description:
BUCK regulators current limit in mA.
+ This property is deprecated, please use
+ "regulator-max-microamp" instead.
Listed current limits in mA are,
2100 (default)
@@ -73,21 +76,11 @@ properties:
nxp,phase-shift:
$ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 45
- maximum: 0
+ default: 0
+ enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
description:
BUCK regulators phase shift control in degrees.
- Listed phase shift control values in degrees are,
- 45
- 90
- 135
- 180
- 225
- 270
- 315
- 0 (default)
-
unevaluatedProperties: false
"^vsnvs$":
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
index 7d462b899473..ce1e04354006 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
@@ -50,6 +50,8 @@ First Level Nodes - PMIC
"qcom,pm8350-rpmh-regulators"
"qcom,pm8350c-rpmh-regulators"
"qcom,pm8998-rpmh-regulators"
+ "qcom,pmc8180-rpmh-regulators"
+ "qcom,pmc8180c-rpmh-regulators"
"qcom,pmi8998-rpmh-regulators"
"qcom,pm6150-rpmh-regulators"
"qcom,pm6150l-rpmh-regulators"
diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index 53853ec20fe2..cf784bd1f5e5 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -22,11 +22,17 @@ properties:
type: object
properties:
+ qcom,soft-start-us:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Regulator soft start time in microseconds.
+ enum: [200, 400, 600, 800]
+ default: 200
interrupts:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
description:
- Short-circuit interrupt for lab.
+ Short-circuit and over-current interrupts for lab.
required:
- interrupts
@@ -35,11 +41,17 @@ properties:
type: object
properties:
+ qcom,discharge-resistor-kohms:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Discharge resistor value in KiloOhms.
+ enum: [300, 64, 32, 16]
+ default: 300
interrupts:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
description:
- Short-circuit interrupt for lab.
+ Short-circuit and over-current interrupts for ibb.
required:
- interrupts
@@ -57,13 +69,15 @@ examples:
compatible = "qcom,pmi8998-lab-ibb";
lab {
- interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "sc-err";
+ interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sc-err", "ocp";
};
ibb {
- interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "sc-err";
+ interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sc-err", "ocp";
};
};
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
new file mode 100644
index 000000000000..d9c23333e157
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt4831-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4831 Display Bias Voltage Regulator
+
+maintainers:
+ - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+ RT4831 is a multifunctional device that can provide power to the LCD display
+ and LCD backlight.
+
+ For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V.
+ It is sufficient to meet the current LCD power requirement.
+
+ DSVLCM is a boost regulator in IC internal as DSVP and DSVN input power.
+ Its voltage should be configured above 0.15V to 0.2V gap larger than the
+ voltage needed for DSVP and DSVN. Too much voltage gap could improve the
+ voltage drop from the heavy loading scenario. But it also make the power
+ efficiency worse. It's a trade-off.
+
+ Datasheet is available at
+ https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
+
+patternProperties:
+ "^DSV(LCM|P|N)$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single Display Bias Voltage regulator.
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d294d1a210b..7beba8384e5f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11688,9 +11688,9 @@ F: drivers/video/fbdev/atmel_lcdfb.c
F: include/video/atmel_lcdc.h
MICROCHIP MCP16502 PMIC DRIVER
-M: Andrei Stefanescu <andrei.stefanescu@microchip.com>
+M: Claudiu Beznea <claudiu.beznea@microchip.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
+S: Supported
F: Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
F: drivers/regulator/mcp16502.c
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 26a4a5a6871e..2f0528d01299 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -232,7 +232,7 @@
&apps_rsc {
pm8009-rpmh-regulators {
- compatible = "qcom,pm8009-rpmh-regulators";
+ compatible = "qcom,pm8009-1-rpmh-regulators";
qcom,pmic-id = "f";
vdd-s1-supply = <&vph_pwr>;
@@ -241,6 +241,13 @@
vdd-l5-l6-supply = <&vreg_bob>;
vdd-l7-supply = <&vreg_s4a_1p8>;
+ vreg_s2f_0p95: smps2 {
+ regulator-name = "vreg_s2f_0p95";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
vreg_l1f_1p1: ldo1 {
regulator-name = "vreg_l1f_1p1";
regulator-min-microvolt = <1104000>;
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index a3bac9da8cbb..3b2276f04a98 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -21,7 +21,6 @@
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/mfd/dbx500-prcmu.h>
-#include <linux/regulator/ab8500.h>
#include <linux/of.h>
#include <linux/of_device.h>
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5abdd29fb9f3..77c43134bc9e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -122,15 +122,6 @@ config REGULATOR_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
regulator driver.
-config REGULATOR_AB3100
- tristate "ST-Ericsson AB3100 Regulator functions"
- depends on AB3100_CORE
- default y if AB3100_CORE
- help
- These regulators correspond to functionality in the
- AB3100 analog baseband dealing with power regulators
- for the system.
-
config REGULATOR_AB8500
bool "ST-Ericsson AB8500 Power Regulators"
depends on AB8500_CORE
@@ -179,6 +170,14 @@ config REGULATOR_AS3722
AS3722 PMIC. This will enable support for all the software
controllable DCDC/LDO regulators.
+config REGULATOR_ATC260X
+ tristate "Actions Semi ATC260x PMIC Regulators"
+ depends on MFD_ATC260X
+ help
+ This driver provides support for the voltage regulators on the
+ ATC260x PMICs. This will enable support for all the software
+ controllable DCDC/LDO regulators.
+
config REGULATOR_AXP20X
tristate "X-POWERS AXP20X PMIC Regulators"
depends on MFD_AXP20X
@@ -732,6 +731,16 @@ config REGULATOR_MT6311
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MT6315
+ tristate "MediaTek MT6315 PMIC"
+ depends on SPMI
+ select REGMAP_SPMI
+ help
+ Say y here to select this option to enable the power regulator of
+ MediaTek MT6315 PMIC.
+ This driver supports the control of different power rails of device
+ through regulator interface.
+
config REGULATOR_MT6323
tristate "MediaTek MT6323 PMIC"
depends on MFD_MT6397
@@ -777,6 +786,16 @@ config REGULATOR_MT6397
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MTK_DVFSRC
+ tristate "MediaTek DVFSRC regulator driver"
+ depends on MTK_DVFSRC
+ help
+ Say y here to control regulator by DVFSRC (dynamic voltage
+ and frequency scaling resource collector).
+ This driver supports to control regulators via the DVFSRC
+ of Mediatek. It allows for voting on regulator state
+ between multiple users.
+
config REGULATOR_PALMAS
tristate "TI Palmas PMIC Regulators"
depends on MFD_PALMAS
@@ -828,6 +847,10 @@ config REGULATOR_PF8X00
Say y here to support the regulators found on the NXP
PF8100/PF8121A/PF8200 PMIC.
+ Say M here if you want to support for the regulators found
+ on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
+ "pf8x00-regulator".
+
config REGULATOR_PFUZE100
tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
depends on I2C && OF
@@ -969,6 +992,16 @@ config REGULATOR_RT4801
This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
The device supports two regulators (DSVP/DSVN).
+config REGULATOR_RT4831
+ tristate "Richtek RT4831 DSV Regulators"
+ depends on MFD_RT4831
+ help
+ This adds support for voltage regulators in Richtek RT4831.
+ There are three regulators (VLCM/DSVP/DSVN).
+ VLCM is a virtual voltage input for DSVP/DSVN inside IC.
+ And DSVP/DSVN is the real Vout range from 4V to 6.5V.
+ It's common used to provide the power for the display panel.
+
config REGULATOR_RT5033
tristate "Richtek RT5033 Regulators"
depends on MFD_RT5033
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 680e539f6579..44d2f8bf4b74 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o
obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
-obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o
@@ -27,6 +26,7 @@ obj-$(CONFIG_REGULATOR_ARIZONA_MICSUPP) += arizona-micsupp.o
obj-$(CONFIG_REGULATOR_ARM_SCMI) += scmi-regulator.o
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
+obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
@@ -89,11 +89,13 @@ obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o
obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
+obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
+obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
@@ -118,6 +120,7 @@ obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o
obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
obj-$(CONFIG_REGULATOR_ROHM) += rohm-regulator.o
obj-$(CONFIG_REGULATOR_RT4801) += rt4801-regulator.o
+obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o
obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
deleted file mode 100644
index a544f45efe53..000000000000
--- a/drivers/regulator/ab3100.c
+++ /dev/null
@@ -1,724 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * drivers/regulator/ab3100.c
- *
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * Low-level control of the AB3100 IC Low Dropout (LDO)
- * regulators, external regulator and buck converter
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/mfd/ab3100.h>
-#include <linux/mfd/abx500.h>
-#include <linux/of.h>
-#include <linux/regulator/of_regulator.h>
-
-/* LDO registers and some handy masking definitions for AB3100 */
-#define AB3100_LDO_A 0x40
-#define AB3100_LDO_C 0x41
-#define AB3100_LDO_D 0x42
-#define AB3100_LDO_E 0x43
-#define AB3100_LDO_E_SLEEP 0x44
-#define AB3100_LDO_F 0x45
-#define AB3100_LDO_G 0x46
-#define AB3100_LDO_H 0x47
-#define AB3100_LDO_H_SLEEP_MODE 0
-#define AB3100_LDO_H_SLEEP_EN 2
-#define AB3100_LDO_ON 4
-#define AB3100_LDO_H_VSEL_AC 5
-#define AB3100_LDO_K 0x48
-#define AB3100_LDO_EXT 0x49
-#define AB3100_BUCK 0x4A
-#define AB3100_BUCK_SLEEP 0x4B
-#define AB3100_REG_ON_MASK 0x10
-
-/**
- * struct ab3100_regulator
- * A struct passed around the individual regulator functions
- * @platform_device: platform device holding this regulator
- * @dev: handle to the device
- * @plfdata: AB3100 platform data passed in at probe time
- * @regreg: regulator register number in the AB3100
- */
-struct ab3100_regulator {
- struct device *dev;
- struct ab3100_platform_data *plfdata;
- u8 regreg;
-};
-
-/* The order in which registers are initialized */
-static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
- AB3100_LDO_A,
- AB3100_LDO_C,
- AB3100_LDO_E,
- AB3100_LDO_E_SLEEP,
- AB3100_LDO_F,
- AB3100_LDO_G,
- AB3100_LDO_H,
- AB3100_LDO_K,
- AB3100_LDO_EXT,
- AB3100_BUCK,
- AB3100_BUCK_SLEEP,
- AB3100_LDO_D,
-};
-
-/* Preset (hardware defined) voltages for these regulators */
-#define LDO_A_VOLTAGE 2750000
-#define LDO_C_VOLTAGE 2650000
-#define LDO_D_VOLTAGE 2650000
-
-static const unsigned int ldo_e_buck_typ_voltages[] = {
- 1800000,
- 1400000,
- 1300000,
- 1200000,
- 1100000,
- 1050000,
- 900000,
-};
-
-static const unsigned int ldo_f_typ_voltages[] = {
- 1800000,
- 1400000,
- 1300000,
- 1200000,
- 1100000,
- 1050000,
- 2500000,
- 2650000,
-};
-
-static const unsigned int ldo_g_typ_voltages[] = {
- 2850000,
- 2750000,
- 1800000,
- 1500000,
-};
-
-static const unsigned int ldo_h_typ_voltages[] = {
- 2750000,
- 1800000,
- 1500000,
- 1200000,
-};
-
-static const unsigned int ldo_k_typ_voltages[] = {
- 2750000,
- 1800000,
-};
-
-
-/* The regulator devices */
-static struct ab3100_regulator
-ab3100_regulators[AB3100_NUM_REGULATORS] = {
- {
- .regreg = AB3100_LDO_A,
- },
- {
- .regreg = AB3100_LDO_C,
- },
- {
- .regreg = AB3100_LDO_D,
- },
- {
- .regreg = AB3100_LDO_E,
- },
- {
- .regreg = AB3100_LDO_F,
- },
- {
- .regreg = AB3100_LDO_G,
- },
- {
- .regreg = AB3100_LDO_H,
- },
- {
- .regreg = AB3100_LDO_K,
- },
- {
- .regreg = AB3100_LDO_EXT,
- /* No voltages for the external regulator */
- },
- {
- .regreg = AB3100_BUCK,
- },
-};
-
-/*
- * General functions for enable, disable and is_enabled used for
- * LDO: A,C,E,F,G,H,K,EXT and BUCK
- */
-static int ab3100_enable_regulator(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- int err;
- u8 regval;
-
- err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
- &regval);
- if (err) {
- dev_warn(&reg->dev, "failed to get regid %d value\n",
- abreg->regreg);
- return err;
- }
-
- /* The regulator is already on, no reason to go further */
- if (regval & AB3100_REG_ON_MASK)
- return 0;
-
- regval |= AB3100_REG_ON_MASK;
-
- err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
- regval);
- if (err) {
- dev_warn(&reg->dev, "failed to set regid %d value\n",
- abreg->regreg);
- return err;
- }
-
- return 0;
-}
-
-static int ab3100_disable_regulator(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- int err;
- u8 regval;
-
- /*
- * LDO D is a special regulator. When it is disabled, the entire
- * system is shut down. So this is handled specially.
- */
- pr_info("Called ab3100_disable_regulator\n");
- if (abreg->regreg == AB3100_LDO_D) {
- dev_info(&reg->dev, "disabling LDO D - shut down system\n");
- /* Setting LDO D to 0x00 cuts the power to the SoC */
- return abx500_set_register_interruptible(abreg->dev, 0,
- AB3100_LDO_D, 0x00U);
- }
-
- /*
- * All other regulators are handled here
- */
- err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
- &regval);
- if (err) {
- dev_err(&reg->dev, "unable to get register 0x%x\n",
- abreg->regreg);
- return err;
- }
- regval &= ~AB3100_REG_ON_MASK;
- return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
- regval);
-}
-
-static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- u8 regval;
- int err;
-
- err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
- &regval);
- if (err) {
- dev_err(&reg->dev, "unable to get register 0x%x\n",
- abreg->regreg);
- return err;
- }
-
- return regval & AB3100_REG_ON_MASK;
-}
-
-static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- u8 regval;
- int err;
-
- /*
- * For variable types, read out setting and index into
- * supplied voltage list.
- */
- err = abx500_get_register_interruptible(abreg->dev, 0,
- abreg->regreg, &regval);
- if (err) {
- dev_warn(&reg->dev,
- "failed to get regulator value in register %02x\n",
- abreg->regreg);
- return err;
- }
-
- /* The 3 highest bits index voltages */
- regval &= 0xE0;
- regval >>= 5;
-
- if (regval >= reg->desc->n_voltages) {
- dev_err(&reg->dev,
- "regulator register %02x contains an illegal voltage setting\n",
- abreg->regreg);
- return -EINVAL;
- }
-
- return reg->desc->volt_table[regval];
-}
-
-static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
- unsigned selector)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- u8 regval;
- int err;
-
- err = abx500_get_register_interruptible(abreg->dev, 0,
- abreg->regreg, &regval);
- if (err) {
- dev_warn(&reg->dev,
- "failed to get regulator register %02x\n",
- abreg->regreg);
- return err;
- }
-
- /* The highest three bits control the variable regulators */
- regval &= ~0xE0;
- regval |= (selector << 5);
-
- err = abx500_set_register_interruptible(abreg->dev, 0,
- abreg->regreg, regval);
- if (err)
- dev_warn(&reg->dev, "failed to set regulator register %02x\n",
- abreg->regreg);
-
- return err;
-}
-
-static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
- int uV)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- u8 regval;
- int err;
- int bestindex;
- u8 targetreg;
-
- if (abreg->regreg == AB3100_LDO_E)
- targetreg = AB3100_LDO_E_SLEEP;
- else if (abreg->regreg == AB3100_BUCK)
- targetreg = AB3100_BUCK_SLEEP;
- else
- return -EINVAL;
-
- /* LDO E and BUCK have special suspend voltages you can set */
- bestindex = regulator_map_voltage_iterate(reg, uV, uV);
-
- err = abx500_get_register_interruptible(abreg->dev, 0,
- targetreg, &regval);
- if (err) {
- dev_warn(&reg->dev,
- "failed to get regulator register %02x\n",
- targetreg);
- return err;
- }
-
- /* The highest three bits control the variable regulators */
- regval &= ~0xE0;
- regval |= (bestindex << 5);
-
- err = abx500_set_register_interruptible(abreg->dev, 0,
- targetreg, regval);
- if (err)
- dev_warn(&reg->dev, "failed to set regulator register %02x\n",
- abreg->regreg);
-
- return err;
-}
-
-/*
- * The external regulator can just define a fixed voltage.
- */
-static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-
- if (abreg->plfdata)
- return abreg->plfdata->external_voltage;
- else
- /* TODO: encode external voltage into device tree */
- return 0;
-}
-
-static const struct regulator_ops regulator_ops_fixed = {
- .enable = ab3100_enable_regulator,
- .disable = ab3100_disable_regulator,
- .is_enabled = ab3100_is_enabled_regulator,
-};
-
-static const struct regulator_ops regulator_ops_variable = {
- .enable = ab3100_enable_regulator,
- .disable = ab3100_disable_regulator,
- .is_enabled = ab3100_is_enabled_regulator,
- .get_voltage = ab3100_get_voltage_regulator,
- .set_voltage_sel = ab3100_set_voltage_regulator_sel,
- .list_voltage = regulator_list_voltage_table,
-};
-
-static const struct regulator_ops regulator_ops_variable_sleepable = {
- .enable = ab3100_enable_regulator,
- .disable = ab3100_disable_regulator,
- .is_enabled = ab3100_is_enabled_regulator,
- .get_voltage = ab3100_get_voltage_regulator,
- .set_voltage_sel = ab3100_set_voltage_regulator_sel,
- .set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
- .list_voltage = regulator_list_voltage_table,
-};
-
-/*
- * LDO EXT is an external regulator so it is really
- * not possible to set any voltage locally here, AB3100
- * is an on/off switch plain an simple. The external
- * voltage is defined in the board set-up if any.
- */
-static const struct regulator_ops regulator_ops_external = {
- .enable = ab3100_enable_regulator,
- .disable = ab3100_disable_regulator,
- .is_enabled = ab3100_is_enabled_regulator,
- .get_voltage = ab3100_get_voltage_regulator_external,
-};
-
-static const struct regulator_desc
-ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
- {
- .name = "LDO_A",
- .id = AB3100_LDO_A,
- .ops = &regulator_ops_fixed,
- .n_voltages = 1,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .fixed_uV = LDO_A_VOLTAGE,
- .enable_time = 200,
- },
- {
- .name = "LDO_C",
- .id = AB3100_LDO_C,
- .ops = &regulator_ops_fixed,
- .n_voltages = 1,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .fixed_uV = LDO_C_VOLTAGE,
- .enable_time = 200,
- },
- {
- .name = "LDO_D",
- .id = AB3100_LDO_D,
- .ops = &regulator_ops_fixed,
- .n_voltages = 1,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .fixed_uV = LDO_D_VOLTAGE,
- .enable_time = 200,
- },
- {
- .name = "LDO_E",
- .id = AB3100_LDO_E,
- .ops = &regulator_ops_variable_sleepable,
- .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
- .volt_table = ldo_e_buck_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 200,
- },
- {
- .name = "LDO_F",
- .id = AB3100_LDO_F,
- .ops = &regulator_ops_variable,
- .n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
- .volt_table = ldo_f_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 600,
- },
- {
- .name = "LDO_G",
- .id = AB3100_LDO_G,
- .ops = &regulator_ops_variable,
- .n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
- .volt_table = ldo_g_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 400,
- },
- {
- .name = "LDO_H",
- .id = AB3100_LDO_H,
- .ops = &regulator_ops_variable,
- .n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
- .volt_table = ldo_h_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 200,
- },
- {
- .name = "LDO_K",
- .id = AB3100_LDO_K,
- .ops = &regulator_ops_variable,
- .n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
- .volt_table = ldo_k_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 200,
- },
- {
- .name = "LDO_EXT",
- .id = AB3100_LDO_EXT,
- .ops = &regulator_ops_external,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
- {
- .name = "BUCK",
- .id = AB3100_BUCK,
- .ops = &regulator_ops_variable_sleepable,
- .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
- .volt_table = ldo_e_buck_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 1000,
- },
-};
-
-static int ab3100_regulator_register(struct platform_device *pdev,
- struct ab3100_platform_data *plfdata,
- struct regulator_init_data *init_data,
- struct device_node *np,
- unsigned long id)
-{
- const struct regulator_desc *desc;
- struct ab3100_regulator *reg;
- struct regulator_dev *rdev;
- struct regulator_config config = { };
- int err, i;
-
- for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
- desc = &ab3100_regulator_desc[i];
- if (desc->id == id)
- break;
- }
- if (desc->id != id)
- return -ENODEV;
-
- /* Same index used for this array */
- reg = &ab3100_regulators[i];
-
- /*
- * Initialize per-regulator struct.
- * Inherit platform data, this comes down from the
- * i2c boarddata, from the machine. So if you want to
- * see what it looks like for a certain machine, go
- * into the machine I2C setup.
- */
- reg->dev = &pdev->dev;
- if (plfdata) {
- reg->plfdata = plfdata;
- config.init_data = &plfdata->reg_constraints[i];
- } else if (np) {
- config.of_node = np;
- config.init_data = init_data;
- }
- config.dev = &pdev->dev;
- config.driver_data = reg;
-
- rdev = devm_regulator_register(&pdev->dev, desc, &config);
- if (IS_ERR(rdev)) {
- err = PTR_ERR(rdev);
- dev_err(&pdev->dev,
- "%s: failed to register regulator %s err %d\n",
- __func__, desc->name,
- err);
- return err;
- }
-
- return 0;
-}
-
-static struct of_regulator_match ab3100_regulator_matches[] = {
- { .name = "ab3100_ldo_a", .driver_data = (void *) AB3100_LDO_A, },
- { .name = "ab3100_ldo_c", .driver_data = (void *) AB3100_LDO_C, },
- { .name = "ab3100_ldo_d", .driver_data = (void *) AB3100_LDO_D, },
- { .name = "ab3100_ldo_e", .driver_data = (void *) AB3100_LDO_E, },
- { .name = "ab3100_ldo_f", .driver_data = (void *) AB3100_LDO_F },
- { .name = "ab3100_ldo_g", .driver_data = (void *) AB3100_LDO_G },
- { .name = "ab3100_ldo_h", .driver_data = (void *) AB3100_LDO_H },
- { .name = "ab3100_ldo_k", .driver_data = (void *) AB3100_LDO_K },
- { .name = "ab3100_ext", .driver_data = (void *) AB3100_LDO_EXT },
- { .name = "ab3100_buck", .driver_data = (void *) AB3100_BUCK },
-};
-
-/*
- * Initial settings of ab3100 registers.
- * Common for below LDO regulator settings are that
- * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
- * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
- */
-/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
-#define LDO_A_SETTING 0x16
-/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_C_SETTING 0x10
-/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
-#define LDO_D_SETTING 0x10
-/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_E_SETTING 0x10
-/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
-#define LDO_E_SLEEP_SETTING 0x00
-/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_F_SETTING 0xD0
-/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_G_SETTING 0x00
-/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
-#define LDO_H_SETTING 0x18
-/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_K_SETTING 0x00
-/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
-#define LDO_EXT_SETTING 0x00
-/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
-#define BUCK_SETTING 0x7D
-/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
-#define BUCK_SLEEP_SETTING 0xAC
-
-static const u8 ab3100_reg_initvals[] = {
- LDO_A_SETTING,
- LDO_C_SETTING,
- LDO_E_SETTING,
- LDO_E_SLEEP_SETTING,
- LDO_F_SETTING,
- LDO_G_SETTING,
- LDO_H_SETTING,
- LDO_K_SETTING,
- LDO_EXT_SETTING,
- BUCK_SETTING,
- BUCK_SLEEP_SETTING,
- LDO_D_SETTING,
-};
-
-static int
-ab3100_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
-{
- int err, i;
-
- /*
- * Set up the regulator registers, as was previously done with
- * platform data.
- */
- /* Set up regulators */
- for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
- err = abx500_set_register_interruptible(&pdev->dev, 0,
- ab3100_reg_init_order[i],
- ab3100_reg_initvals[i]);
- if (err) {
- dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
- err);
- return err;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(ab3100_regulator_matches); i++) {
- err = ab3100_regulator_register(
- pdev, NULL, ab3100_regulator_matches[i].init_data,
- ab3100_regulator_matches[i].of_node,
- (unsigned long)ab3100_regulator_matches[i].driver_data);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-
-static int ab3100_regulators_probe(struct platform_device *pdev)
-{
- struct ab3100_platform_data *plfdata = dev_get_platdata(&pdev->dev);
- struct device_node *np = pdev->dev.of_node;
- int err = 0;
- u8 data;
- int i;
-
- /* Check chip state */
- err = abx500_get_register_interruptible(&pdev->dev, 0,
- AB3100_LDO_D, &data);
- if (err) {
- dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
- return err;
- }
- if (data & 0x10)
- dev_notice(&pdev->dev,
- "chip is already in active mode (Warm start)\n");
- else
- dev_notice(&pdev->dev,
- "chip is in inactive mode (Cold start)\n");
-
- if (np) {
- err = of_regulator_match(&pdev->dev, np,
- ab3100_regulator_matches,
- ARRAY_SIZE(ab3100_regulator_matches));
- if (err < 0) {
- dev_err(&pdev->dev,
- "Error parsing regulator init data: %d\n", err);
- return err;
- }
- return ab3100_regulator_of_probe(pdev, np);
- }
-
- /* Set up regulators */
- for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
- err = abx500_set_register_interruptible(&pdev->dev, 0,
- ab3100_reg_init_order[i],
- plfdata->reg_initvals[i]);
- if (err) {
- dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
- err);
- return err;
- }
- }
-
- /* Register the regulators */
- for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
- const struct regulator_desc *desc = &ab3100_regulator_desc[i];
-
- err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
- desc->id);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-static struct platform_driver ab3100_regulators_driver = {
- .driver = {
- .name = "ab3100-regulators",
- },
- .probe = ab3100_regulators_probe,
-};
-
-static __init int ab3100_regulators_init(void)
-{
- return platform_driver_register(&ab3100_regulators_driver);
-}
-
-static __exit void ab3100_regulators_exit(void)
-{
- platform_driver_unregister(&ab3100_regulators_driver);
-}
-
-subsys_initcall(ab3100_regulators_init);
-module_exit(ab3100_regulators_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
-MODULE_DESCRIPTION("AB3100 Regulator driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ab3100-regulators");
diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c
index 8bb43a671ded..4f26952caa56 100644
--- a/drivers/regulator/ab8500-ext.c
+++ b/drivers/regulator/ab8500-ext.c
@@ -22,403 +22,17 @@
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
-#include <linux/regulator/ab8500.h>
-
-static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
- /* Main display, u8500 R3 uib */
- REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
- /* Main display, u8500 uib and ST uib */
- REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
- /* Secondary display, ST uib */
- REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
- /* SFH7741 proximity sensor */
- REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
- /* BH1780GLS ambient light sensor */
- REGULATOR_SUPPLY("vcc", "2-0029"),
- /* lsm303dlh accelerometer */
- REGULATOR_SUPPLY("vdd", "2-0018"),
- /* lsm303dlhc accelerometer */
- REGULATOR_SUPPLY("vdd", "2-0019"),
- /* lsm303dlh magnetometer */
- REGULATOR_SUPPLY("vdd", "2-001e"),
- /* Rohm BU21013 Touchscreen devices */
- REGULATOR_SUPPLY("avdd", "3-005c"),
- REGULATOR_SUPPLY("avdd", "3-005d"),
- /* Synaptics RMI4 Touchscreen device */
- REGULATOR_SUPPLY("vdd", "3-004b"),
- /* L3G4200D Gyroscope device */
- REGULATOR_SUPPLY("vdd", "2-0068"),
- /* Ambient light sensor device */
- REGULATOR_SUPPLY("vdd", "3-0029"),
- /* Pressure sensor device */
- REGULATOR_SUPPLY("vdd", "2-005c"),
- /* Cypress TrueTouch Touchscreen device */
- REGULATOR_SUPPLY("vcpin", "spi8.0"),
- /* Camera device */
- REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
- /* On-board eMMC power */
- REGULATOR_SUPPLY("vmmc", "sdi4"),
- /* AB8500 audio codec */
- REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
- /* AB8500 accessory detect 1 */
- REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
- /* AB8500 Tv-out device */
- REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
- /* AV8100 HDMI device */
- REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
- REGULATOR_SUPPLY("v-SD-STM", "stm"),
- /* External MMC slot power */
- REGULATOR_SUPPLY("vmmc", "sdi0"),
-};
-
-static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
- /* TV-out DENC supply */
- REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
- /* Internal general-purpose ADC */
- REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
- /* ADC for charger */
- REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
- /* AB8500 Tv-out device */
- REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
-};
-
-static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
- /* AB8500 audio-codec main supply */
- REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
- /* AB8500 audio-codec Mic1 supply */
- REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
- /* AB8500 audio-codec Mic2 supply */
- REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
- /* AB8500 audio-codec DMic supply */
- REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
-};
-static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
- /* SoC core supply, no device */
- REGULATOR_SUPPLY("v-intcore", NULL),
- /* USB Transceiver */
- REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
- /* Handled by abx500 clk driver */
- REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vana_consumers[] = {
- /* DB8500 DSI */
- REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
- REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
- REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
- /* DB8500 CSI */
- REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
-};
-
-/* ab8500 regulator register initialization */
-static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
- /*
- * VanaRequestCtrl = HP/LP depending on VxRequest
- * VextSupply1RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00),
- /*
- * VextSupply2RequestCtrl = HP/LP depending on VxRequest
- * VextSupply3RequestCtrl = HP/LP depending on VxRequest
- * Vaux1RequestCtrl = HP/LP depending on VxRequest
- * Vaux2RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00),
- /*
- * Vaux3RequestCtrl = HP/LP depending on VxRequest
- * SwHPReq = Control through SWValid disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00),
- /*
- * VanaSysClkReq1HPValid = disabled
- * Vaux1SysClkReq1HPValid = disabled
- * Vaux2SysClkReq1HPValid = disabled
- * Vaux3SysClkReq1HPValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
- /*
- * VextSupply1SysClkReq1HPValid = disabled
- * VextSupply2SysClkReq1HPValid = disabled
- * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
- /*
- * VanaHwHPReq1Valid = disabled
- * Vaux1HwHPreq1Valid = disabled
- * Vaux2HwHPReq1Valid = disabled
- * Vaux3HwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00),
- /*
- * VextSupply1HwHPReq1Valid = disabled
- * VextSupply2HwHPReq1Valid = disabled
- * VextSupply3HwHPReq1Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00),
- /*
- * VanaHwHPReq2Valid = disabled
- * Vaux1HwHPReq2Valid = disabled
- * Vaux2HwHPReq2Valid = disabled
- * Vaux3HwHPReq2Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00),
- /*
- * VextSupply1HwHPReq2Valid = disabled
- * VextSupply2HwHPReq2Valid = disabled
- * VextSupply3HwHPReq2Valid = HWReq2 controlled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04),
- /*
- * VanaSwHPReqValid = disabled
- * Vaux1SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00),
- /*
- * Vaux2SwHPReqValid = disabled
- * Vaux3SwHPReqValid = disabled
- * VextSupply1SwHPReqValid = disabled
- * VextSupply2SwHPReqValid = disabled
- * VextSupply3SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00),
- /*
- * SysClkReq2Valid1 = SysClkReq2 controlled
- * SysClkReq3Valid1 = disabled
- * SysClkReq4Valid1 = SysClkReq4 controlled
- * SysClkReq5Valid1 = disabled
- * SysClkReq6Valid1 = SysClkReq6 controlled
- * SysClkReq7Valid1 = disabled
- * SysClkReq8Valid1 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a),
- /*
- * SysClkReq2Valid2 = disabled
- * SysClkReq3Valid2 = disabled
- * SysClkReq4Valid2 = disabled
- * SysClkReq5Valid2 = disabled
- * SysClkReq6Valid2 = SysClkReq6 controlled
- * SysClkReq7Valid2 = disabled
- * SysClkReq8Valid2 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20),
- /*
- * VTVoutEna = disabled
- * Vintcore12Ena = disabled
- * Vintcore12Sel = 1.25 V
- * Vintcore12LP = inactive (HP)
- * VTVoutLP = inactive (HP)
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10),
- /*
- * VaudioEna = disabled
- * VdmicEna = disabled
- * Vamic1Ena = disabled
- * Vamic2Ena = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00),
- /*
- * Vamic1_dzout = high-Z when Vamic1 is disabled
- * Vamic2_dzout = high-Z when Vamic2 is disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00),
- /*
- * VPll = Hw controlled (NOTE! PRCMU bits)
- * VanaRegu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02),
- /*
- * VrefDDREna = disabled
- * VrefDDRSleepMode = inactive (no pulldown)
- */
- INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00),
- /*
- * VextSupply1Regu = force LP
- * VextSupply2Regu = force OFF
- * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP)
- * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
- * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
- */
- INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13),
- /*
- * Vaux1Regu = force HP
- * Vaux2Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01),
- /*
- * Vaux3Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00),
- /*
- * Vaux1Sel = 2.8 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C),
- /*
- * Vaux2Sel = 2.9 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d),
- /*
- * Vaux3Sel = 2.91 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07),
- /*
- * VextSupply12LP = disabled (no LP)
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00),
- /*
- * Vaux1Disch = short discharge time
- * Vaux2Disch = short discharge time
- * Vaux3Disch = short discharge time
- * Vintcore12Disch = short discharge time
- * VTVoutDisch = short discharge time
- * VaudioDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00),
- /*
- * VanaDisch = short discharge time
- * VdmicPullDownEna = pulldown disabled when Vdmic is disabled
- * VdmicDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00),
+/* AB8500 external regulators */
+enum ab8500_ext_regulator_id {
+ AB8500_EXT_SUPPLY1,
+ AB8500_EXT_SUPPLY2,
+ AB8500_EXT_SUPPLY3,
+ AB8500_NUM_EXT_REGULATORS,
};
-/* AB8500 regulators */
-static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
- /* supplies to the display/camera */
- [AB8500_LDO_AUX1] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-DISPLAY",
- .min_uV = 2800000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1, /* display is on at boot */
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
- .consumer_supplies = ab8500_vaux1_consumers,
- },
- /* supplies to the on-board eMMC */
- [AB8500_LDO_AUX2] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-eMMC1",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
- .consumer_supplies = ab8500_vaux2_consumers,
- },
- /* supply for VAUX3, supplies to SDcard slots */
- [AB8500_LDO_AUX3] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-MMC-SD",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
- .consumer_supplies = ab8500_vaux3_consumers,
- },
- /* supply for tvout, gpadc, TVOUT LDO */
- [AB8500_LDO_TVOUT] = {
- .constraints = {
- .name = "V-TVOUT",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
- .consumer_supplies = ab8500_vtvout_consumers,
- },
- /* supply for ab8500-vaudio, VAUDIO LDO */
- [AB8500_LDO_AUDIO] = {
- .constraints = {
- .name = "V-AUD",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
- .consumer_supplies = ab8500_vaud_consumers,
- },
- /* supply for v-anamic1 VAMic1-LDO */
- [AB8500_LDO_ANAMIC1] = {
- .constraints = {
- .name = "V-AMIC1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
- .consumer_supplies = ab8500_vamic1_consumers,
- },
- /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
- [AB8500_LDO_ANAMIC2] = {
- .constraints = {
- .name = "V-AMIC2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
- .consumer_supplies = ab8500_vamic2_consumers,
- },
- /* supply for v-dmic, VDMIC LDO */
- [AB8500_LDO_DMIC] = {
- .constraints = {
- .name = "V-DMIC",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
- .consumer_supplies = ab8500_vdmic_consumers,
- },
- /* supply for v-intcore12, VINTCORE12 LDO */
- [AB8500_LDO_INTCORE] = {
- .constraints = {
- .name = "V-INTCORE",
- .min_uV = 1250000,
- .max_uV = 1350000,
- .input_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE |
- REGULATOR_CHANGE_DRMS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
- .consumer_supplies = ab8500_vintcore_consumers,
- },
- /* supply for U8500 CSI-DSI, VANA LDO */
- [AB8500_LDO_ANA] = {
- .constraints = {
- .name = "V-CSI-DSI",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
- .consumer_supplies = ab8500_vana_consumers,
- },
+struct ab8500_ext_regulator_cfg {
+ bool hwreq; /* requires hw mode or high power mode */
};
/* supply for VextSupply3 */
@@ -465,15 +79,6 @@ static struct regulator_init_data ab8500_ext_regulators[] = {
},
};
-static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
- .reg_init = ab8500_reg_init,
- .num_reg_init = ARRAY_SIZE(ab8500_reg_init),
- .regulator = ab8500_regulators,
- .num_regulator = ARRAY_SIZE(ab8500_regulators),
- .ext_regulator = ab8500_ext_regulators,
- .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
-};
-
/**
* struct ab8500_ext_regulator_info - ab8500 regulator information
* @dev: device pointer
@@ -788,7 +393,6 @@ static struct ab8500_ext_regulator_info
static int ab8500_ext_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
- struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data;
struct regulator_config config = { };
struct regulator_dev *rdev;
int i;
@@ -798,12 +402,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
return -EINVAL;
}
- /* make sure the platform data has the correct size */
- if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
- dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
- return -EINVAL;
- }
-
/* check for AB8500 2.x */
if (is_ab8500_2p0_or_earlier(ab8500)) {
struct ab8500_ext_regulator_info *info;
@@ -823,11 +421,11 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
info = &ab8500_ext_regulator_info[i];
info->dev = &pdev->dev;
info->cfg = (struct ab8500_ext_regulator_cfg *)
- pdata->ext_regulator[i].driver_data;
+ ab8500_ext_regulators[i].driver_data;
config.dev = &pdev->dev;
config.driver_data = info;
- config.init_data = &pdata->ext_regulator[i];
+ config.init_data = &ab8500_ext_regulators[i];
/* register regulator with framework */
rdev = devm_regulator_register(&pdev->dev, &info->desc,
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 47b8b6f7b571..23a401734a98 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -25,9 +25,123 @@
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
#include <linux/slab.h>
+/* AB8500 regulators */
+enum ab8500_regulator_id {
+ AB8500_LDO_AUX1,
+ AB8500_LDO_AUX2,
+ AB8500_LDO_AUX3,
+ AB8500_LDO_INTCORE,
+ AB8500_LDO_TVOUT,
+ AB8500_LDO_AUDIO,
+ AB8500_LDO_ANAMIC1,
+ AB8500_LDO_ANAMIC2,
+ AB8500_LDO_DMIC,
+ AB8500_LDO_ANA,
+ AB8500_NUM_REGULATORS,
+};
+
+/* AB8505 regulators */
+enum ab8505_regulator_id {
+ AB8505_LDO_AUX1,
+ AB8505_LDO_AUX2,
+ AB8505_LDO_AUX3,
+ AB8505_LDO_AUX4,
+ AB8505_LDO_AUX5,
+ AB8505_LDO_AUX6,
+ AB8505_LDO_INTCORE,
+ AB8505_LDO_ADC,
+ AB8505_LDO_AUDIO,
+ AB8505_LDO_ANAMIC1,
+ AB8505_LDO_ANAMIC2,
+ AB8505_LDO_AUX8,
+ AB8505_LDO_ANA,
+ AB8505_NUM_REGULATORS,
+};
+
+/* AB8500 registers */
+enum ab8500_regulator_reg {
+ AB8500_REGUREQUESTCTRL2,
+ AB8500_REGUREQUESTCTRL3,
+ AB8500_REGUREQUESTCTRL4,
+ AB8500_REGUSYSCLKREQ1HPVALID1,
+ AB8500_REGUSYSCLKREQ1HPVALID2,
+ AB8500_REGUHWHPREQ1VALID1,
+ AB8500_REGUHWHPREQ1VALID2,
+ AB8500_REGUHWHPREQ2VALID1,
+ AB8500_REGUHWHPREQ2VALID2,
+ AB8500_REGUSWHPREQVALID1,
+ AB8500_REGUSWHPREQVALID2,
+ AB8500_REGUSYSCLKREQVALID1,
+ AB8500_REGUSYSCLKREQVALID2,
+ AB8500_REGUMISC1,
+ AB8500_VAUDIOSUPPLY,
+ AB8500_REGUCTRL1VAMIC,
+ AB8500_VPLLVANAREGU,
+ AB8500_VREFDDR,
+ AB8500_EXTSUPPLYREGU,
+ AB8500_VAUX12REGU,
+ AB8500_VRF1VAUX3REGU,
+ AB8500_VAUX1SEL,
+ AB8500_VAUX2SEL,
+ AB8500_VRF1VAUX3SEL,
+ AB8500_REGUCTRL2SPARE,
+ AB8500_REGUCTRLDISCH,
+ AB8500_REGUCTRLDISCH2,
+ AB8500_NUM_REGULATOR_REGISTERS,
+};
+
+/* AB8505 registers */
+enum ab8505_regulator_reg {
+ AB8505_REGUREQUESTCTRL1,
+ AB8505_REGUREQUESTCTRL2,
+ AB8505_REGUREQUESTCTRL3,
+ AB8505_REGUREQUESTCTRL4,
+ AB8505_REGUSYSCLKREQ1HPVALID1,
+ AB8505_REGUSYSCLKREQ1HPVALID2,
+ AB8505_REGUHWHPREQ1VALID1,
+ AB8505_REGUHWHPREQ1VALID2,
+ AB8505_REGUHWHPREQ2VALID1,
+ AB8505_REGUHWHPREQ2VALID2,
+ AB8505_REGUSWHPREQVALID1,
+ AB8505_REGUSWHPREQVALID2,
+ AB8505_REGUSYSCLKREQVALID1,
+ AB8505_REGUSYSCLKREQVALID2,
+ AB8505_REGUVAUX4REQVALID,
+ AB8505_REGUMISC1,
+ AB8505_VAUDIOSUPPLY,
+ AB8505_REGUCTRL1VAMIC,
+ AB8505_VSMPSAREGU,
+ AB8505_VSMPSBREGU,
+ AB8505_VSAFEREGU, /* NOTE! PRCMU register */
+ AB8505_VPLLVANAREGU,
+ AB8505_EXTSUPPLYREGU,
+ AB8505_VAUX12REGU,
+ AB8505_VRF1VAUX3REGU,
+ AB8505_VSMPSASEL1,
+ AB8505_VSMPSASEL2,
+ AB8505_VSMPSASEL3,
+ AB8505_VSMPSBSEL1,
+ AB8505_VSMPSBSEL2,
+ AB8505_VSMPSBSEL3,
+ AB8505_VSAFESEL1, /* NOTE! PRCMU register */
+ AB8505_VSAFESEL2, /* NOTE! PRCMU register */
+ AB8505_VSAFESEL3, /* NOTE! PRCMU register */
+ AB8505_VAUX1SEL,
+ AB8505_VAUX2SEL,
+ AB8505_VRF1VAUX3SEL,
+ AB8505_VAUX4REQCTRL,
+ AB8505_VAUX4REGU,
+ AB8505_VAUX4SEL,
+ AB8505_REGUCTRLDISCH,
+ AB8505_REGUCTRLDISCH2,
+ AB8505_REGUCTRLDISCH3,
+ AB8505_CTRLVAUX5,
+ AB8505_CTRLVAUX6,
+ AB8505_NUM_REGULATOR_REGISTERS,
+};
+
/**
* struct ab8500_shared_mode - is used when mode is shared between
* two regulators.
diff --git a/drivers/regulator/atc260x-regulator.c b/drivers/regulator/atc260x-regulator.c
new file mode 100644
index 000000000000..d8b429955d33
--- /dev/null
+++ b/drivers/regulator/atc260x-regulator.c
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Regulator driver for ATC260x PMICs
+//
+// Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+// Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+#include <linux/mfd/atc260x/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+struct atc260x_regulator_data {
+ int voltage_time_dcdc;
+ int voltage_time_ldo;
+};
+
+static const struct linear_range atc2603c_dcdc_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1300000, 0, 13, 50000),
+ REGULATOR_LINEAR_RANGE(1950000, 14, 15, 100000),
+};
+
+static const struct linear_range atc2609a_dcdc_voltage_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 127, 6250),
+ REGULATOR_LINEAR_RANGE(1400000, 128, 232, 25000),
+};
+
+static const struct linear_range atc2609a_ldo_voltage_ranges0[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000),
+ REGULATOR_LINEAR_RANGE(2100000, 16, 28, 100000),
+};
+
+static const struct linear_range atc2609a_ldo_voltage_ranges1[] = {
+ REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000),
+ REGULATOR_LINEAR_RANGE(2100000, 16, 27, 100000),
+};
+
+static const unsigned int atc260x_ldo_voltage_range_sel[] = {
+ 0x0, 0x1,
+};
+
+static int atc260x_dcdc_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
+
+ if (new_selector > old_selector)
+ return data->voltage_time_dcdc;
+
+ return 0;
+}
+
+static int atc260x_ldo_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector)
+{
+ struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
+
+ if (new_selector > old_selector)
+ return data->voltage_time_ldo;
+
+ return 0;
+}
+
+static const struct regulator_ops atc260x_dcdc_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_ldo_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_ldo_bypass_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+ .set_bypass = regulator_set_bypass_regmap,
+ .get_bypass = regulator_get_bypass_regmap,
+};
+
+static const struct regulator_ops atc260x_ldo_bypass_discharge_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+ .set_bypass = regulator_set_bypass_regmap,
+ .get_bypass = regulator_get_bypass_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
+static const struct regulator_ops atc260x_dcdc_range_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_ldo_range_pick_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_pickable_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+ .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_dcdc_fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_ldo_fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_no_ops = {
+};
+
+/*
+ * Note LDO8 is not documented in datasheet (v2.4), but supported
+ * in the vendor's driver implementation (xapp-le-kernel).
+ */
+enum atc2603c_reg_ids {
+ ATC2603C_ID_DCDC1,
+ ATC2603C_ID_DCDC2,
+ ATC2603C_ID_DCDC3,
+ ATC2603C_ID_LDO1,
+ ATC2603C_ID_LDO2,
+ ATC2603C_ID_LDO3,
+ ATC2603C_ID_LDO5,
+ ATC2603C_ID_LDO6,
+ ATC2603C_ID_LDO7,
+ ATC2603C_ID_LDO8,
+ ATC2603C_ID_LDO11,
+ ATC2603C_ID_LDO12,
+ ATC2603C_ID_SWITCHLDO1,
+ ATC2603C_ID_MAX,
+};
+
+#define atc2603c_reg_desc_dcdc(num, min, step, n_volt, vsel_h, vsel_l) { \
+ .name = "DCDC"#num, \
+ .supply_name = "dcdc"#num, \
+ .of_match = of_match_ptr("dcdc"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2603C_ID_DCDC##num, \
+ .ops = &atc260x_dcdc_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .n_voltages = n_volt, \
+ .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
+ .vsel_mask = GENMASK(vsel_h, vsel_l), \
+ .enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
+ .enable_mask = BIT(15), \
+ .enable_time = 800, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_dcdc_range(num, vsel_h, vsel_l) { \
+ .name = "DCDC"#num, \
+ .supply_name = "dcdc"#num, \
+ .of_match = of_match_ptr("dcdc"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2603C_ID_DCDC##num, \
+ .ops = &atc260x_dcdc_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .n_voltages = 16, \
+ .linear_ranges = atc2603c_dcdc_voltage_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(atc2603c_dcdc_voltage_ranges), \
+ .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
+ .vsel_mask = GENMASK(vsel_h, vsel_l), \
+ .enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
+ .enable_mask = BIT(15), \
+ .enable_time = 800, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_dcdc_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
+ .name = "DCDC"#num, \
+ .supply_name = "dcdc"#num, \
+ .of_match = of_match_ptr("dcdc"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2603C_ID_DCDC##num, \
+ .ops = &atc260x_dcdc_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .n_voltages = n_volt, \
+ .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
+ .vsel_mask = GENMASK(vsel_h, vsel_l), \
+ .enable_time = 800, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo(num, min, step, n_volt, vsel_h, vsel_l) { \
+ .name = "LDO"#num, \
+ .supply_name = "ldo"#num, \
+ .of_match = of_match_ptr("ldo"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2603C_ID_LDO##num, \
+ .ops = &atc260x_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .n_voltages = n_volt, \
+ .vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
+ .vsel_mask = GENMASK(vsel_h, vsel_l), \
+ .enable_reg = ATC2603C_PMU_LDO##num##_CTL, \
+ .enable_mask = BIT(0), \
+ .enable_time = 2000, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
+ .name = "LDO"#num, \
+ .supply_name = "ldo"#num, \
+ .of_match = of_match_ptr("ldo"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2603C_ID_LDO##num, \
+ .ops = &atc260x_ldo_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .n_voltages = n_volt, \
+ .vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
+ .vsel_mask = GENMASK(vsel_h, vsel_l), \
+ .enable_time = 2000, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo_noops(num, vfixed) { \
+ .name = "LDO"#num, \
+ .supply_name = "ldo"#num, \
+ .of_match = of_match_ptr("ldo"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2603C_ID_LDO##num, \
+ .ops = &atc260x_no_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .fixed_uV = vfixed, \
+ .n_voltages = 1, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo_switch(num, min, step, n_volt, vsel_h, vsel_l) { \
+ .name = "SWITCHLDO"#num, \
+ .supply_name = "switchldo"#num, \
+ .of_match = of_match_ptr("switchldo"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2603C_ID_SWITCHLDO##num, \
+ .ops = &atc260x_ldo_bypass_discharge_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .n_voltages = n_volt, \
+ .vsel_reg = ATC2603C_PMU_SWITCH_CTL, \
+ .vsel_mask = GENMASK(vsel_h, vsel_l), \
+ .enable_reg = ATC2603C_PMU_SWITCH_CTL, \
+ .enable_mask = BIT(15), \
+ .enable_is_inverted = true, \
+ .enable_time = 2000, \
+ .bypass_reg = ATC2603C_PMU_SWITCH_CTL, \
+ .bypass_mask = BIT(5), \
+ .active_discharge_reg = ATC2603C_PMU_SWITCH_CTL, \
+ .active_discharge_mask = BIT(1), \
+ .owner = THIS_MODULE, \
+}
+
+static const struct regulator_desc atc2603c_reg[] = {
+ atc2603c_reg_desc_dcdc_fixed(1, 700000, 25000, 29, 11, 7),
+ atc2603c_reg_desc_dcdc_range(2, 12, 8),
+ atc2603c_reg_desc_dcdc_fixed(3, 2600000, 100000, 8, 11, 9),
+ atc2603c_reg_desc_ldo_fixed(1, 2600000, 100000, 8, 15, 13),
+ atc2603c_reg_desc_ldo_fixed(2, 2600000, 100000, 8, 15, 13),
+ atc2603c_reg_desc_ldo_fixed(3, 1500000, 100000, 6, 15, 13),
+ atc2603c_reg_desc_ldo(5, 2600000, 100000, 8, 15, 13),
+ atc2603c_reg_desc_ldo_fixed(6, 700000, 25000, 29, 15, 11),
+ atc2603c_reg_desc_ldo(7, 1500000, 100000, 6, 15, 13),
+ atc2603c_reg_desc_ldo(8, 2300000, 100000, 11, 15, 12),
+ atc2603c_reg_desc_ldo_fixed(11, 2600000, 100000, 8, 15, 13),
+ atc2603c_reg_desc_ldo_noops(12, 1800000),
+ atc2603c_reg_desc_ldo_switch(1, 3000000, 100000, 4, 4, 3),
+};
+
+static const struct regulator_desc atc2603c_reg_dcdc2_ver_b =
+ atc2603c_reg_desc_dcdc(2, 1000000, 50000, 18, 12, 8);
+
+enum atc2609a_reg_ids {
+ ATC2609A_ID_DCDC0,
+ ATC2609A_ID_DCDC1,
+ ATC2609A_ID_DCDC2,
+ ATC2609A_ID_DCDC3,
+ ATC2609A_ID_DCDC4,
+ ATC2609A_ID_LDO0,
+ ATC2609A_ID_LDO1,
+ ATC2609A_ID_LDO2,
+ ATC2609A_ID_LDO3,
+ ATC2609A_ID_LDO4,
+ ATC2609A_ID_LDO5,
+ ATC2609A_ID_LDO6,
+ ATC2609A_ID_LDO7,
+ ATC2609A_ID_LDO8,
+ ATC2609A_ID_LDO9,
+ ATC2609A_ID_MAX,
+};
+
+#define atc2609a_reg_desc_dcdc(num, en_bit) { \
+ .name = "DCDC"#num, \
+ .supply_name = "dcdc"#num, \
+ .of_match = of_match_ptr("dcdc"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2609A_ID_DCDC##num, \
+ .ops = &atc260x_dcdc_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .min_uV = 600000, \
+ .uV_step = 6250, \
+ .n_voltages = 256, \
+ .vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
+ .vsel_mask = GENMASK(15, 8), \
+ .enable_reg = ATC2609A_PMU_DC_OSC, \
+ .enable_mask = BIT(en_bit), \
+ .enable_time = 800, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_dcdc_range(num, en_bit) { \
+ .name = "DCDC"#num, \
+ .supply_name = "dcdc"#num, \
+ .of_match = of_match_ptr("dcdc"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2609A_ID_DCDC##num, \
+ .ops = &atc260x_dcdc_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .n_voltages = 233, \
+ .linear_ranges = atc2609a_dcdc_voltage_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(atc2609a_dcdc_voltage_ranges), \
+ .vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
+ .vsel_mask = GENMASK(15, 8), \
+ .enable_reg = ATC2609A_PMU_DC_OSC, \
+ .enable_mask = BIT(en_bit), \
+ .enable_time = 800, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo(num) { \
+ .name = "LDO"#num, \
+ .supply_name = "ldo"#num, \
+ .of_match = of_match_ptr("ldo"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2609A_ID_LDO##num, \
+ .ops = &atc260x_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .min_uV = 700000, \
+ .uV_step = 100000, \
+ .n_voltages = 16, \
+ .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+ .vsel_mask = GENMASK(4, 1), \
+ .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+ .enable_mask = BIT(0), \
+ .enable_time = 2000, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo_bypass(num) { \
+ .name = "LDO"#num, \
+ .supply_name = "ldo"#num, \
+ .of_match = of_match_ptr("ldo"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2609A_ID_LDO##num, \
+ .ops = &atc260x_ldo_bypass_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .min_uV = 2300000, \
+ .uV_step = 100000, \
+ .n_voltages = 12, \
+ .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+ .vsel_mask = GENMASK(5, 2), \
+ .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+ .enable_mask = BIT(0), \
+ .enable_time = 2000, \
+ .bypass_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+ .bypass_mask = BIT(1), \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo_range_pick(num, n_range) { \
+ .name = "LDO"#num, \
+ .supply_name = "ldo"#num, \
+ .of_match = of_match_ptr("ldo"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2609A_ID_LDO##num, \
+ .ops = &atc260x_ldo_range_pick_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .linear_ranges = atc2609a_ldo_voltage_ranges##n_range, \
+ .n_linear_ranges = ARRAY_SIZE(atc2609a_ldo_voltage_ranges##n_range), \
+ .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+ .vsel_mask = GENMASK(4, 1), \
+ .vsel_range_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+ .vsel_range_mask = BIT(5), \
+ .linear_range_selectors = atc260x_ldo_voltage_range_sel, \
+ .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+ .enable_mask = BIT(0), \
+ .enable_time = 2000, \
+ .owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo_fixed(num) { \
+ .name = "LDO"#num, \
+ .supply_name = "ldo"#num, \
+ .of_match = of_match_ptr("ldo"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .id = ATC2609A_ID_LDO##num, \
+ .ops = &atc260x_ldo_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .min_uV = 2600000, \
+ .uV_step = 100000, \
+ .n_voltages = 8, \
+ .vsel_reg = ATC2609A_PMU_LDO##num##_CTL, \
+ .vsel_mask = GENMASK(15, 13), \
+ .enable_time = 2000, \
+ .owner = THIS_MODULE, \
+}
+
+static const struct regulator_desc atc2609a_reg[] = {
+ atc2609a_reg_desc_dcdc(0, 4),
+ atc2609a_reg_desc_dcdc(1, 5),
+ atc2609a_reg_desc_dcdc(2, 6),
+ atc2609a_reg_desc_dcdc_range(3, 7),
+ atc2609a_reg_desc_dcdc(4, 8),
+ atc2609a_reg_desc_ldo_bypass(0),
+ atc2609a_reg_desc_ldo_bypass(1),
+ atc2609a_reg_desc_ldo_bypass(2),
+ atc2609a_reg_desc_ldo_range_pick(3, 0),
+ atc2609a_reg_desc_ldo_range_pick(4, 0),
+ atc2609a_reg_desc_ldo(5),
+ atc2609a_reg_desc_ldo_range_pick(6, 1),
+ atc2609a_reg_desc_ldo_range_pick(7, 0),
+ atc2609a_reg_desc_ldo_range_pick(8, 0),
+ atc2609a_reg_desc_ldo_fixed(9),
+};
+
+static int atc260x_regulator_probe(struct platform_device *pdev)
+{
+ struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = atc260x->dev;
+ struct atc260x_regulator_data *atc260x_data;
+ struct regulator_config config = {};
+ struct regulator_dev *atc260x_rdev;
+ const struct regulator_desc *regulators;
+ bool atc2603c_ver_b = false;
+ int i, nregulators;
+
+ atc260x_data = devm_kzalloc(&pdev->dev, sizeof(*atc260x_data), GFP_KERNEL);
+ if (!atc260x_data)
+ return -ENOMEM;
+
+ atc260x_data->voltage_time_dcdc = 350;
+ atc260x_data->voltage_time_ldo = 800;
+
+ switch (atc260x->ic_type) {
+ case ATC2603C:
+ regulators = atc2603c_reg;
+ nregulators = ATC2603C_ID_MAX;
+ atc2603c_ver_b = atc260x->ic_ver == ATC260X_B;
+ break;
+ case ATC2609A:
+ atc260x_data->voltage_time_dcdc = 250;
+ regulators = atc2609a_reg;
+ nregulators = ATC2609A_ID_MAX;
+ break;
+ default:
+ dev_err(dev, "unsupported ATC260X ID %d\n", atc260x->ic_type);
+ return -EINVAL;
+ }
+
+ config.dev = dev;
+ config.regmap = atc260x->regmap;
+ config.driver_data = atc260x_data;
+
+ /* Instantiate the regulators */
+ for (i = 0; i < nregulators; i++) {
+ if (atc2603c_ver_b && regulators[i].id == ATC2603C_ID_DCDC2)
+ atc260x_rdev = devm_regulator_register(&pdev->dev,
+ &atc2603c_reg_dcdc2_ver_b,
+ &config);
+ else
+ atc260x_rdev = devm_regulator_register(&pdev->dev,
+ &regulators[i],
+ &config);
+ if (IS_ERR(atc260x_rdev)) {
+ dev_err(dev, "failed to register regulator: %d\n", i);
+ return PTR_ERR(atc260x_rdev);
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver atc260x_regulator_driver = {
+ .probe = atc260x_regulator_probe,
+ .driver = {
+ .name = "atc260x-regulator",
+ },
+};
+
+module_platform_driver(atc260x_regulator_driver);
+
+MODULE_DESCRIPTION("Regulator driver for ATC260x PMICs");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 90cb8445f721..d260c442b788 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -1070,7 +1070,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
static int axp20x_regulator_parse_dt(struct platform_device *pdev)
{
struct device_node *np, *regulators;
- int ret;
+ int ret = 0;
u32 dcdcfreq = 0;
np = of_node_get(pdev->dev.parent->of_node);
@@ -1085,13 +1085,12 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
if (ret < 0) {
dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
- return ret;
}
-
of_node_put(regulators);
}
- return 0;
+ of_node_put(np);
+ return ret;
}
static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c
index d44adf7e875a..1f5f9482b209 100644
--- a/drivers/regulator/bd70528-regulator.c
+++ b/drivers/regulator/bd70528-regulator.c
@@ -244,19 +244,14 @@ static const struct regulator_desc bd70528_desc[] = {
static int bd70528_probe(struct platform_device *pdev)
{
- struct rohm_regmap_dev *bd70528;
int i;
struct regulator_config config = {
.dev = pdev->dev.parent,
};
- bd70528 = dev_get_drvdata(pdev->dev.parent);
- if (!bd70528) {
- dev_err(&pdev->dev, "No MFD driver data\n");
- return -EINVAL;
- }
-
- config.regmap = bd70528->regmap;
+ config.regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!config.regmap)
+ return -ENODEV;
for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) {
struct regulator_dev *rdev;
diff --git a/drivers/regulator/bd71828-regulator.c b/drivers/regulator/bd71828-regulator.c
index 85c0b9000963..6b12e963ed8f 100644
--- a/drivers/regulator/bd71828-regulator.c
+++ b/drivers/regulator/bd71828-regulator.c
@@ -749,19 +749,14 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
static int bd71828_probe(struct platform_device *pdev)
{
- struct rohm_regmap_dev *bd71828;
int i, j, ret;
struct regulator_config config = {
.dev = pdev->dev.parent,
};
- bd71828 = dev_get_drvdata(pdev->dev.parent);
- if (!bd71828) {
- dev_err(&pdev->dev, "No MFD driver data\n");
- return -EINVAL;
- }
-
- config.regmap = bd71828->regmap;
+ config.regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!config.regmap)
+ return -ENODEV;
for (i = 0; i < ARRAY_SIZE(bd71828_rdata); i++) {
struct regulator_dev *rdev;
@@ -777,7 +772,7 @@ static int bd71828_probe(struct platform_device *pdev)
return PTR_ERR(rdev);
}
for (j = 0; j < rd->reg_init_amnt; j++) {
- ret = regmap_update_bits(bd71828->regmap,
+ ret = regmap_update_bits(config.regmap,
rd->reg_inits[j].reg,
rd->reg_inits[j].mask,
rd->reg_inits[j].val);
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index 9309765d0450..8ff47ea522d6 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -1554,7 +1554,7 @@ err_out:
static int bd718xx_probe(struct platform_device *pdev)
{
- struct bd718xx *mfd;
+ struct regmap *regmap;
struct regulator_config config = { 0 };
int i, j, err, omit_enable;
bool use_snvs;
@@ -1563,11 +1563,10 @@ static int bd718xx_probe(struct platform_device *pdev)
enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
const struct regulator_ops **swops, **hwops;
- mfd = dev_get_drvdata(pdev->dev.parent);
- if (!mfd) {
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap) {
dev_err(&pdev->dev, "No MFD driver data\n");
- err = -EINVAL;
- goto err;
+ return -EINVAL;
}
switch (chip) {
@@ -1590,7 +1589,7 @@ static int bd718xx_probe(struct platform_device *pdev)
}
/* Register LOCK release */
- err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_REGLOCK,
+ err = regmap_update_bits(regmap, BD718XX_REG_REGLOCK,
(REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
if (err) {
dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err);
@@ -1609,8 +1608,7 @@ static int bd718xx_probe(struct platform_device *pdev)
* bit allowing HW defaults for power rails to be used
*/
if (!use_snvs) {
- err = regmap_update_bits(mfd->chip.regmap,
- BD718XX_REG_TRANS_COND1,
+ err = regmap_update_bits(regmap, BD718XX_REG_TRANS_COND1,
BD718XX_ON_REQ_POWEROFF_MASK |
BD718XX_SWRESET_POWEROFF_MASK |
BD718XX_WDOG_POWEROFF_MASK |
@@ -1626,7 +1624,7 @@ static int bd718xx_probe(struct platform_device *pdev)
}
config.dev = pdev->dev.parent;
- config.regmap = mfd->chip.regmap;
+ config.regmap = regmap;
/*
* There are cases when we want to leave the enable-control for
* the HW state machine and use this driver only for voltage control.
@@ -1685,7 +1683,7 @@ static int bd718xx_probe(struct platform_device *pdev)
if (!no_enable_control && (!use_snvs ||
!rdev->constraints->always_on ||
!rdev->constraints->boot_on)) {
- err = regmap_update_bits(mfd->chip.regmap, r->init.reg,
+ err = regmap_update_bits(regmap, r->init.reg,
r->init.mask, r->init.val);
if (err) {
dev_err(&pdev->dev,
@@ -1695,7 +1693,7 @@ static int bd718xx_probe(struct platform_device *pdev)
}
}
for (j = 0; j < r->additional_init_amnt; j++) {
- err = regmap_update_bits(mfd->chip.regmap,
+ err = regmap_update_bits(regmap,
r->additional_inits[j].reg,
r->additional_inits[j].mask,
r->additional_inits[j].val);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 67a768fe5b2a..16114aea099a 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1617,7 +1617,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
const char *supply_name)
{
struct regulator *regulator;
- int err;
+ int err = 0;
if (dev) {
char buf[REG_STR_SIZE];
@@ -1663,8 +1663,8 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
}
}
- regulator->debugfs = debugfs_create_dir(supply_name,
- rdev->debugfs);
+ if (err != -EEXIST)
+ regulator->debugfs = debugfs_create_dir(supply_name, rdev->debugfs);
if (!regulator->debugfs) {
rdev_dbg(rdev, "Failed to create debugfs directory\n");
} else {
@@ -2042,7 +2042,7 @@ struct regulator *_regulator_get(struct device *dev, const char *id,
* Returns a struct regulator corresponding to the regulator producer,
* or IS_ERR() condition containing errno.
*
- * Use of supply names configured via regulator_set_device_supply() is
+ * Use of supply names configured via set_consumer_device_supply() is
* strongly encouraged. It is recommended that the supply name used
* should match the name used for the supply and/or the relevant
* device pins in the datasheet.
@@ -2069,7 +2069,7 @@ EXPORT_SYMBOL_GPL(regulator_get);
* regulator off for correct operation of the hardware they are
* controlling.
*
- * Use of supply names configured via regulator_set_device_supply() is
+ * Use of supply names configured via set_consumer_device_supply() is
* strongly encouraged. It is recommended that the supply name used
* should match the name used for the supply and/or the relevant
* device pins in the datasheet.
@@ -2095,7 +2095,7 @@ EXPORT_SYMBOL_GPL(regulator_get_exclusive);
* disrupting the operation of drivers that can handle absent
* supplies.
*
- * Use of supply names configured via regulator_set_device_supply() is
+ * Use of supply names configured via set_consumer_device_supply() is
* strongly encouraged. It is recommended that the supply name used
* should match the name used for the supply and/or the relevant
* device pins in the datasheet.
@@ -4153,7 +4153,11 @@ int regulator_sync_voltage(struct regulator *regulator)
if (ret < 0)
goto out;
- ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
+ /* balance only, if regulator is coupled */
+ if (rdev->coupling_desc.n_coupled > 1)
+ ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON);
+ else
+ ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
out:
regulator_unlock(rdev);
diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index 74ad92dc664a..88c6bd5b6c78 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -550,7 +550,7 @@ static int mcp16502_probe(struct i2c_client *client,
config.regmap = rmap;
config.driver_data = mcp;
- mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
+ mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW);
if (IS_ERR(mcp->lpm)) {
dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
return PTR_ERR(mcp->lpm);
diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c
new file mode 100644
index 000000000000..d49a1534d8e9
--- /dev/null
+++ b/drivers/regulator/mt6315-regulator.c
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2021 MediaTek Inc.
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6315-regulator.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/spmi.h>
+
+#define MT6315_BUCK_MODE_AUTO 0
+#define MT6315_BUCK_MODE_FORCE_PWM 1
+#define MT6315_BUCK_MODE_LP 2
+
+struct mt6315_regulator_info {
+ struct regulator_desc desc;
+ u32 status_reg;
+ u32 lp_mode_mask;
+ u32 lp_mode_shift;
+};
+
+struct mt_regulator_init_data {
+ u32 modeset_mask[MT6315_VBUCK_MAX];
+};
+
+struct mt6315_chip {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+#define MT_BUCK(_name, _bid, _vsel) \
+[_bid] = { \
+ .desc = { \
+ .name = _name, \
+ .of_match = of_match_ptr(_name), \
+ .regulators_node = "regulators", \
+ .ops = &mt6315_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _bid, \
+ .owner = THIS_MODULE, \
+ .n_voltages = 0xbf, \
+ .linear_ranges = mt_volt_range1, \
+ .n_linear_ranges = ARRAY_SIZE(mt_volt_range1), \
+ .vsel_reg = _vsel, \
+ .vsel_mask = 0xff, \
+ .enable_reg = MT6315_BUCK_TOP_CON0, \
+ .enable_mask = BIT(_bid), \
+ .of_map_mode = mt6315_map_mode, \
+ }, \
+ .status_reg = _bid##_DBG4, \
+ .lp_mode_mask = BIT(_bid), \
+ .lp_mode_shift = _bid, \
+}
+
+static const struct linear_range mt_volt_range1[] = {
+ REGULATOR_LINEAR_RANGE(0, 0, 0xbf, 6250),
+};
+
+static unsigned int mt6315_map_mode(u32 mode)
+{
+ switch (mode) {
+ case MT6315_BUCK_MODE_AUTO:
+ return REGULATOR_MODE_NORMAL;
+ case MT6315_BUCK_MODE_FORCE_PWM:
+ return REGULATOR_MODE_FAST;
+ case MT6315_BUCK_MODE_LP:
+ return REGULATOR_MODE_IDLE;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned int mt6315_regulator_get_mode(struct regulator_dev *rdev)
+{
+ struct mt_regulator_init_data *init = rdev_get_drvdata(rdev);
+ const struct mt6315_regulator_info *info;
+ int ret, regval;
+ u32 modeset_mask;
+
+ info = container_of(rdev->desc, struct mt6315_regulator_info, desc);
+ modeset_mask = init->modeset_mask[rdev_get_id(rdev)];
+ ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_4PHASE_ANA_CON42, &regval);
+ if (ret != 0) {
+ dev_notice(&rdev->dev, "Failed to get mode: %d\n", ret);
+ return ret;
+ }
+
+ if ((regval & modeset_mask) == modeset_mask)
+ return REGULATOR_MODE_FAST;
+
+ ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_CON1, &regval);
+ if (ret != 0) {
+ dev_notice(&rdev->dev, "Failed to get lp mode: %d\n", ret);
+ return ret;
+ }
+
+ if (regval & info->lp_mode_mask)
+ return REGULATOR_MODE_IDLE;
+ else
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int mt6315_regulator_set_mode(struct regulator_dev *rdev,
+ u32 mode)
+{
+ struct mt_regulator_init_data *init = rdev_get_drvdata(rdev);
+ const struct mt6315_regulator_info *info;
+ int ret, val, curr_mode;
+ u32 modeset_mask;
+
+ info = container_of(rdev->desc, struct mt6315_regulator_info, desc);
+ modeset_mask = init->modeset_mask[rdev_get_id(rdev)];
+ curr_mode = mt6315_regulator_get_mode(rdev);
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ ret = regmap_update_bits(rdev->regmap,
+ MT6315_BUCK_TOP_4PHASE_ANA_CON42,
+ modeset_mask,
+ modeset_mask);
+ break;
+ case REGULATOR_MODE_NORMAL:
+ if (curr_mode == REGULATOR_MODE_FAST) {
+ ret = regmap_update_bits(rdev->regmap,
+ MT6315_BUCK_TOP_4PHASE_ANA_CON42,
+ modeset_mask,
+ 0);
+ } else if (curr_mode == REGULATOR_MODE_IDLE) {
+ ret = regmap_update_bits(rdev->regmap,
+ MT6315_BUCK_TOP_CON1,
+ info->lp_mode_mask,
+ 0);
+ usleep_range(100, 110);
+ } else {
+ ret = -EINVAL;
+ }
+ break;
+ case REGULATOR_MODE_IDLE:
+ val = MT6315_BUCK_MODE_LP >> 1;
+ val <<= info->lp_mode_shift;
+ ret = regmap_update_bits(rdev->regmap,
+ MT6315_BUCK_TOP_CON1,
+ info->lp_mode_mask,
+ val);
+ break;
+ default:
+ ret = -EINVAL;
+ dev_notice(&rdev->dev, "Unsupported mode: %d\n", mode);
+ break;
+ }
+
+ if (ret != 0) {
+ dev_notice(&rdev->dev, "Failed to set mode: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mt6315_get_status(struct regulator_dev *rdev)
+{
+ const struct mt6315_regulator_info *info;
+ int ret;
+ u32 regval;
+
+ info = container_of(rdev->desc, struct mt6315_regulator_info, desc);
+ ret = regmap_read(rdev->regmap, info->status_reg, &regval);
+ if (ret < 0) {
+ dev_notice(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+ return ret;
+ }
+
+ return (regval & BIT(0)) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static const struct regulator_ops mt6315_volt_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6315_get_status,
+ .set_mode = mt6315_regulator_set_mode,
+ .get_mode = mt6315_regulator_get_mode,
+};
+
+static const struct mt6315_regulator_info mt6315_regulators[MT6315_VBUCK_MAX] = {
+ MT_BUCK("vbuck1", MT6315_VBUCK1, MT6315_BUCK_TOP_ELR0),
+ MT_BUCK("vbuck2", MT6315_VBUCK2, MT6315_BUCK_TOP_ELR2),
+ MT_BUCK("vbuck3", MT6315_VBUCK3, MT6315_BUCK_TOP_ELR4),
+ MT_BUCK("vbuck4", MT6315_VBUCK4, MT6315_BUCK_TOP_ELR6),
+};
+
+static const struct regmap_config mt6315_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = 0x16d0,
+ .fast_io = true,
+};
+
+static const struct of_device_id mt6315_of_match[] = {
+ {
+ .compatible = "mediatek,mt6315-regulator",
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, mt6315_of_match);
+
+static int mt6315_regulator_probe(struct spmi_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ struct mt6315_chip *chip;
+ struct mt_regulator_init_data *init_data;
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ int i;
+
+ regmap = devm_regmap_init_spmi_ext(pdev, &mt6315_regmap_config);
+ if (!regmap)
+ return -ENODEV;
+
+ chip = devm_kzalloc(dev, sizeof(struct mt6315_chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ init_data = devm_kzalloc(dev, sizeof(struct mt_regulator_init_data), GFP_KERNEL);
+ if (!init_data)
+ return -ENOMEM;
+
+ switch (pdev->usid) {
+ case MT6315_PP:
+ init_data->modeset_mask[MT6315_VBUCK1] = BIT(MT6315_VBUCK1) | BIT(MT6315_VBUCK2) |
+ BIT(MT6315_VBUCK4);
+ break;
+ case MT6315_SP:
+ case MT6315_RP:
+ init_data->modeset_mask[MT6315_VBUCK1] = BIT(MT6315_VBUCK1) | BIT(MT6315_VBUCK2);
+ break;
+ default:
+ init_data->modeset_mask[MT6315_VBUCK1] = BIT(MT6315_VBUCK1);
+ break;
+ }
+ for (i = MT6315_VBUCK2; i < MT6315_VBUCK_MAX; i++)
+ init_data->modeset_mask[i] = BIT(i);
+
+ chip->dev = dev;
+ chip->regmap = regmap;
+ dev_set_drvdata(dev, chip);
+
+ config.dev = dev;
+ config.regmap = regmap;
+ for (i = MT6315_VBUCK1; i < MT6315_VBUCK_MAX; i++) {
+ config.driver_data = init_data;
+ rdev = devm_regulator_register(dev, &mt6315_regulators[i].desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_notice(dev, "Failed to register %s\n", mt6315_regulators[i].desc.name);
+ continue;
+ }
+ }
+
+ return 0;
+}
+
+static void mt6315_regulator_shutdown(struct spmi_device *pdev)
+{
+ struct mt6315_chip *chip = dev_get_drvdata(&pdev->dev);
+ int ret = 0;
+
+ ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, PROTECTION_KEY_H);
+ ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, PROTECTION_KEY);
+ ret |= regmap_update_bits(chip->regmap, MT6315_TOP2_ELR7, 1, 1);
+ ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, 0);
+ ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, 0);
+ if (ret < 0)
+ dev_notice(&pdev->dev, "[%#x] Failed to enable power off sequence. %d\n",
+ pdev->usid, ret);
+}
+
+static struct spmi_driver mt6315_regulator_driver = {
+ .driver = {
+ .name = "mt6315-regulator",
+ .of_match_table = mt6315_of_match,
+ },
+ .probe = mt6315_regulator_probe,
+ .shutdown = mt6315_regulator_shutdown,
+};
+
+module_spmi_driver(mt6315_regulator_driver);
+
+MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6315 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/mtk-dvfsrc-regulator.c b/drivers/regulator/mtk-dvfsrc-regulator.c
new file mode 100644
index 000000000000..d3d876198d6e
--- /dev/null
+++ b/drivers/regulator/mtk-dvfsrc-regulator.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 MediaTek Inc.
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/soc/mediatek/mtk_dvfsrc.h>
+
+#define DVFSRC_ID_VCORE 0
+#define DVFSRC_ID_VSCP 1
+
+#define MT_DVFSRC_REGULAR(match, _name, _volt_table) \
+[DVFSRC_ID_##_name] = { \
+ .desc = { \
+ .name = match, \
+ .of_match = of_match_ptr(match), \
+ .ops = &dvfsrc_vcore_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = DVFSRC_ID_##_name, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(_volt_table), \
+ .volt_table = _volt_table, \
+ }, \
+}
+
+/*
+ * DVFSRC regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @voltage_selector: Selector used for get_voltage_sel() and
+ * set_voltage_sel() callbacks
+ */
+
+struct dvfsrc_regulator {
+ struct regulator_desc desc;
+};
+
+/*
+ * MTK DVFSRC regulators' init data
+ *
+ * @size: num of regulators
+ * @regulator_info: regulator info.
+ */
+struct dvfsrc_regulator_init_data {
+ u32 size;
+ struct dvfsrc_regulator *regulator_info;
+};
+
+static inline struct device *to_dvfsrc_dev(struct regulator_dev *rdev)
+{
+ return rdev_get_dev(rdev)->parent;
+}
+
+static int dvfsrc_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ struct device *dvfsrc_dev = to_dvfsrc_dev(rdev);
+ int id = rdev_get_id(rdev);
+
+ if (id == DVFSRC_ID_VCORE)
+ mtk_dvfsrc_send_request(dvfsrc_dev,
+ MTK_DVFSRC_CMD_VCORE_REQUEST,
+ selector);
+ else if (id == DVFSRC_ID_VSCP)
+ mtk_dvfsrc_send_request(dvfsrc_dev,
+ MTK_DVFSRC_CMD_VSCP_REQUEST,
+ selector);
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+static int dvfsrc_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct device *dvfsrc_dev = to_dvfsrc_dev(rdev);
+ int id = rdev_get_id(rdev);
+ int val, ret;
+
+ if (id == DVFSRC_ID_VCORE)
+ ret = mtk_dvfsrc_query_info(dvfsrc_dev,
+ MTK_DVFSRC_CMD_VCORE_LEVEL_QUERY,
+ &val);
+ else if (id == DVFSRC_ID_VSCP)
+ ret = mtk_dvfsrc_query_info(dvfsrc_dev,
+ MTK_DVFSRC_CMD_VSCP_LEVEL_QUERY,
+ &val);
+ else
+ return -EINVAL;
+
+ if (ret != 0)
+ return ret;
+
+ return val;
+}
+
+static const struct regulator_ops dvfsrc_vcore_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = dvfsrc_get_voltage_sel,
+ .set_voltage_sel = dvfsrc_set_voltage_sel,
+};
+
+static const unsigned int mt8183_voltages[] = {
+ 725000,
+ 800000,
+};
+
+static struct dvfsrc_regulator mt8183_regulators[] = {
+ MT_DVFSRC_REGULAR("dvfsrc-vcore", VCORE,
+ mt8183_voltages),
+};
+
+static const struct dvfsrc_regulator_init_data regulator_mt8183_data = {
+ .size = ARRAY_SIZE(mt8183_regulators),
+ .regulator_info = &mt8183_regulators[0],
+};
+
+static const unsigned int mt6873_voltages[] = {
+ 575000,
+ 600000,
+ 650000,
+ 725000,
+};
+
+static struct dvfsrc_regulator mt6873_regulators[] = {
+ MT_DVFSRC_REGULAR("dvfsrc-vcore", VCORE,
+ mt6873_voltages),
+ MT_DVFSRC_REGULAR("dvfsrc-vscp", VSCP,
+ mt6873_voltages),
+};
+
+static const struct dvfsrc_regulator_init_data regulator_mt6873_data = {
+ .size = ARRAY_SIZE(mt6873_regulators),
+ .regulator_info = &mt6873_regulators[0],
+};
+
+static const struct of_device_id mtk_dvfsrc_regulator_match[] = {
+ {
+ .compatible = "mediatek,mt8183-dvfsrc",
+ .data = &regulator_mt8183_data,
+ }, {
+ .compatible = "mediatek,mt8192-dvfsrc",
+ .data = &regulator_mt6873_data,
+ }, {
+ .compatible = "mediatek,mt6873-dvfsrc",
+ .data = &regulator_mt6873_data,
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, mtk_dvfsrc_regulator_match);
+
+static int dvfsrc_vcore_regulator_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device *dev = &pdev->dev;
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ const struct dvfsrc_regulator_init_data *regulator_init_data;
+ struct dvfsrc_regulator *mt_regulators;
+ int i;
+
+ match = of_match_node(mtk_dvfsrc_regulator_match, dev->parent->of_node);
+
+ if (!match) {
+ dev_err(dev, "invalid compatible string\n");
+ return -ENODEV;
+ }
+
+ regulator_init_data = match->data;
+
+ mt_regulators = regulator_init_data->regulator_info;
+ for (i = 0; i < regulator_init_data->size; i++) {
+ config.dev = dev->parent;
+ config.driver_data = (mt_regulators + i);
+ rdev = devm_regulator_register(dev->parent,
+ &(mt_regulators + i)->desc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "failed to register %s\n",
+ (mt_regulators + i)->desc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver mtk_dvfsrc_regulator_driver = {
+ .driver = {
+ .name = "mtk-dvfsrc-regulator",
+ },
+ .probe = dvfsrc_vcore_regulator_probe,
+};
+
+static int __init mtk_dvfsrc_regulator_init(void)
+{
+ return platform_driver_register(&mtk_dvfsrc_regulator_driver);
+}
+subsys_initcall(mtk_dvfsrc_regulator_init);
+
+static void __exit mtk_dvfsrc_regulator_exit(void)
+{
+ platform_driver_unregister(&mtk_dvfsrc_regulator_driver);
+}
+module_exit(mtk_dvfsrc_regulator_exit);
+
+MODULE_AUTHOR("Arvin wang <arvin.wang@mediatek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index cb29421d745a..833d398c6aa2 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -5,6 +5,7 @@
*/
#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -32,6 +33,7 @@ struct pca9450_regulator_desc {
struct pca9450 {
struct device *dev;
struct regmap *regmap;
+ struct gpio_desc *sd_vsel_gpio;
enum pca9450_chip_type type;
unsigned int rcnt;
int irq;
@@ -795,6 +797,26 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
return ret;
}
+ /* Set reset behavior on assertion of WDOG_B signal */
+ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
+ WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to set WDOG_B reset behavior\n");
+ return ret;
+ }
+
+ /*
+ * The driver uses the LDO5CTRL_H register to control the LDO5 regulator.
+ * This is only valid if the SD_VSEL input of the PMIC is high. Let's
+ * check if the pin is available as GPIO and set it to high.
+ */
+ pca9450->sd_vsel_gpio = gpiod_get_optional(pca9450->dev, "sd-vsel", GPIOD_OUT_HIGH);
+
+ if (IS_ERR(pca9450->sd_vsel_gpio)) {
+ dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n");
+ return ret;
+ }
+
dev_info(&i2c->dev, "%s probed.\n",
type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc");
diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index af9918cd27aa..9b28bd63208d 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -114,7 +114,6 @@ enum swxilim_bits {
#define PF8X00_SWXILIM_SHIFT 3
#define PF8X00_SWXILIM_MASK GENMASK(4, 3)
#define PF8X00_SWXPHASE_MASK GENMASK(2, 0)
-#define PF8X00_SWXPHASE_DEFAULT 0
#define PF8X00_SWXPHASE_SHIFT 7
enum pf8x00_devid {
@@ -126,10 +125,12 @@ enum pf8x00_devid {
#define PF8X00_DEVICE_FAM_MASK GENMASK(7, 4)
#define PF8X00_DEVICE_ID_MASK GENMASK(3, 0)
-struct pf8x00_regulator {
+struct pf8x00_regulator_data {
struct regulator_desc desc;
- u8 ilim;
- u8 phase_shift;
+ unsigned int suspend_enable_reg;
+ unsigned int suspend_enable_mask;
+ unsigned int suspend_voltage_reg;
+ unsigned int suspend_voltage_cache;
};
struct pf8x00_chip {
@@ -150,35 +151,16 @@ static const int pf8x00_ldo_voltages[] = {
3100000, 3150000, 3200000, 3300000, 3350000, 1650000, 1700000, 5000000,
};
-#define SWV(i) (6250 * i + 400000)
-#define SWV_LINE(i) SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \
- SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7)
+/* Output: 2.1A to 4.5A */
+static const unsigned int pf8x00_sw_current_table[] = {
+ 2100000, 2600000, 3000000, 4500000,
+};
/* Output: 0.4V to 1.8V */
-static const int pf8x00_sw1_to_6_voltages[] = {
- SWV_LINE(0),
- SWV_LINE(1),
- SWV_LINE(2),
- SWV_LINE(3),
- SWV_LINE(4),
- SWV_LINE(5),
- SWV_LINE(6),
- SWV_LINE(7),
- SWV_LINE(8),
- SWV_LINE(9),
- SWV_LINE(10),
- SWV_LINE(11),
- SWV_LINE(12),
- SWV_LINE(13),
- SWV_LINE(14),
- SWV_LINE(15),
- SWV_LINE(16),
- SWV_LINE(17),
- SWV_LINE(18),
- SWV_LINE(19),
- SWV_LINE(20),
- SWV_LINE(21),
- 1500000, 1800000,
+#define PF8XOO_SW1_6_VOLTAGE_NUM 0xB2
+static const struct linear_range pf8x00_sw1_to_6_voltages[] = {
+ REGULATOR_LINEAR_RANGE(400000, 0x00, 0xB0, 6250),
+ REGULATOR_LINEAR_RANGE(1800000, 0xB1, 0xB1, 0),
};
/* Output: 1.0V to 4.1V */
@@ -194,15 +176,10 @@ static const int pf8x00_vsnvs_voltages[] = {
0, 1800000, 3000000, 3300000,
};
-static struct pf8x00_regulator *desc_to_regulator(const struct regulator_desc *desc)
-{
- return container_of(desc, struct pf8x00_regulator, desc);
-}
-
-static void swxilim_select(const struct regulator_desc *desc, int ilim)
+static void swxilim_select(struct pf8x00_chip *chip, int id, int ilim)
{
- struct pf8x00_regulator *data = desc_to_regulator(desc);
u8 ilim_sel;
+ u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2;
switch (ilim) {
case 2100:
@@ -222,43 +199,130 @@ static void swxilim_select(const struct regulator_desc *desc, int ilim)
break;
}
- data->ilim = ilim_sel;
+ regmap_update_bits(chip->regmap, reg,
+ PF8X00_SWXILIM_MASK,
+ ilim_sel << PF8X00_SWXILIM_SHIFT);
}
-static int pf8x00_of_parse_cb(struct device_node *np,
+static void handle_ilim_property(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *config)
{
- struct pf8x00_regulator *data = desc_to_regulator(desc);
struct pf8x00_chip *chip = config->driver_data;
+ int ret;
+ int val;
+
+ if ((desc->id >= PF8X00_BUCK1) && (desc->id <= PF8X00_BUCK7)) {
+ ret = of_property_read_u32(np, "nxp,ilim-ma", &val);
+ if (ret) {
+ dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use value stored in OTP\n",
+ desc->id - PF8X00_LDO4);
+ return;
+ }
+
+ dev_warn(chip->dev, "nxp,ilim-ma is deprecated, please use regulator-max-microamp\n");
+ swxilim_select(chip, desc->id, val);
+
+ } else
+ dev_warn(chip->dev, "nxp,ilim-ma used with incorrect regulator (%d)\n", desc->id);
+}
+
+static void handle_shift_property(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+ unsigned char id = desc->id - PF8X00_LDO4;
+ unsigned char reg = PF8X00_SW_BASE(id) + SW_CONFIG2;
+ struct pf8x00_chip *chip = config->driver_data;
+
int phase;
int val;
int ret;
+ if ((desc->id >= PF8X00_BUCK1) && (desc->id <= PF8X00_BUCK7)) {
+ ret = of_property_read_u32(np, "nxp,phase-shift", &val);
+ if (ret) {
+ dev_dbg(chip->dev,
+ "unspecified phase-shift for BUCK%d, using OTP configuration\n",
+ id);
+ return;
+ }
- ret = of_property_read_u32(np, "nxp,ilim-ma", &val);
- if (ret)
- dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use 2100 mA\n",
- desc->id - PF8X00_LDO4);
+ if (val < 0 || val > 315 || val % 45 != 0) {
+ dev_warn(config->dev,
+ "invalid phase_shift %d for BUCK%d, using OTP configuration\n",
+ val, id);
+ return;
+ }
- swxilim_select(desc, val);
+ phase = val / 45;
- ret = of_property_read_u32(np, "nxp,phase-shift", &val);
- if (ret) {
- dev_dbg(chip->dev,
- "unspecified phase-shift for BUCK%d, use 0 degrees\n",
- desc->id - PF8X00_LDO4);
- val = PF8X00_SWXPHASE_DEFAULT;
+ if (phase >= 1)
+ phase -= 1;
+ else
+ phase = PF8X00_SWXPHASE_SHIFT;
+
+ regmap_update_bits(chip->regmap, reg,
+ PF8X00_SWXPHASE_MASK,
+ phase);
+ } else
+ dev_warn(chip->dev, "nxp,phase-shift used with incorrect regulator (%d)\n", id);
+
+}
+
+static int pf8x00_of_parse_cb(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+
+ handle_ilim_property(np, desc, config);
+ handle_shift_property(np, desc, config);
+
+ return 0;
+}
+
+static int pf8x00_suspend_enable(struct regulator_dev *rdev)
+{
+ struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+ struct regmap *rmap = rdev_get_regmap(rdev);
+
+ return regmap_update_bits(rmap, regl->suspend_enable_reg,
+ regl->suspend_enable_mask,
+ regl->suspend_enable_mask);
+}
+
+static int pf8x00_suspend_disable(struct regulator_dev *rdev)
+{
+ struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+ struct regmap *rmap = rdev_get_regmap(rdev);
+
+ return regmap_update_bits(rmap, regl->suspend_enable_reg,
+ regl->suspend_enable_mask, 0);
+}
+
+static int pf8x00_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+ struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (regl->suspend_voltage_cache == uV)
+ return 0;
+
+ ret = regulator_map_voltage_iterate(rdev, uV, uV);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev), "failed to map %i uV\n", uV);
+ return ret;
}
- phase = val / 45;
- if ((phase * 45) != val) {
- dev_warn(config->dev,
- "invalid phase_shift %d for BUCK%d, use 0 degrees\n",
- (phase * 45), desc->id - PF8X00_LDO4);
- phase = PF8X00_SWXPHASE_SHIFT;
+ dev_dbg(rdev_get_dev(rdev), "uV: %i, reg: 0x%x, msk: 0x%x, val: 0x%x\n",
+ uV, regl->suspend_voltage_reg, regl->desc.vsel_mask, ret);
+ ret = regmap_update_bits(rdev->regmap, regl->suspend_voltage_reg,
+ regl->desc.vsel_mask, ret);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev), "failed to set %i uV\n", uV);
+ return ret;
}
- data->phase_shift = (phase >= 1) ? phase - 1 : PF8X00_SWXPHASE_SHIFT;
+ regl->suspend_voltage_cache = uV;
return 0;
}
@@ -270,15 +334,37 @@ static const struct regulator_ops pf8x00_ldo_ops = {
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_suspend_enable = pf8x00_suspend_enable,
+ .set_suspend_disable = pf8x00_suspend_disable,
+ .set_suspend_voltage = pf8x00_set_suspend_voltage,
};
-static const struct regulator_ops pf8x00_buck_ops = {
+
+static const struct regulator_ops pf8x00_buck1_6_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .set_suspend_enable = pf8x00_suspend_enable,
+ .set_suspend_disable = pf8x00_suspend_disable,
+ .set_suspend_voltage = pf8x00_set_suspend_voltage,
+};
+
+static const struct regulator_ops pf8x00_buck7_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .set_suspend_enable = pf8x00_suspend_enable,
+ .set_suspend_disable = pf8x00_suspend_disable,
};
static const struct regulator_ops pf8x00_vsnvs_ops = {
@@ -310,6 +396,9 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.disable_val = 0x0, \
.enable_mask = 2, \
}, \
+ .suspend_enable_reg = (base) + LDO_CONFIG2, \
+ .suspend_enable_mask = 1, \
+ .suspend_voltage_reg = (base) + LDO_STBY_VOLT, \
}
#define PF8X00BUCK(_id, _name, base, voltages) \
@@ -319,14 +408,54 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.of_match = _name, \
.regulators_node = "regulators", \
.of_parse_cb = pf8x00_of_parse_cb, \
- .n_voltages = ARRAY_SIZE(voltages), \
- .ops = &pf8x00_buck_ops, \
+ .n_voltages = PF8XOO_SW1_6_VOLTAGE_NUM, \
+ .ops = &pf8x00_buck1_6_ops, \
.type = REGULATOR_VOLTAGE, \
.id = PF8X00_BUCK ## _id, \
.owner = THIS_MODULE, \
+ .ramp_delay = 19000, \
+ .linear_ranges = pf8x00_sw1_to_6_voltages, \
+ .n_linear_ranges = \
+ ARRAY_SIZE(pf8x00_sw1_to_6_voltages), \
+ .vsel_reg = (base) + SW_RUN_VOLT, \
+ .vsel_mask = 0xff, \
+ .curr_table = pf8x00_sw_current_table, \
+ .n_current_limits = \
+ ARRAY_SIZE(pf8x00_sw_current_table), \
+ .csel_reg = (base) + SW_CONFIG2, \
+ .csel_mask = PF8X00_SWXILIM_MASK, \
+ .enable_reg = (base) + SW_MODE1, \
+ .enable_val = 0x3, \
+ .disable_val = 0x0, \
+ .enable_mask = 0x3, \
+ .enable_time = 500, \
+ }, \
+ .suspend_enable_reg = (base) + SW_MODE1, \
+ .suspend_enable_mask = 0xc, \
+ .suspend_voltage_reg = (base) + SW_STBY_VOLT, \
+ }
+
+#define PF8X00BUCK7(_name, base, voltages) \
+ [PF8X00_BUCK7] = { \
+ .desc = { \
+ .name = _name, \
+ .of_match = _name, \
+ .regulators_node = "regulators", \
+ .of_parse_cb = pf8x00_of_parse_cb, \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pf8x00_buck7_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PF8X00_BUCK7, \
+ .owner = THIS_MODULE, \
+ .ramp_delay = 19000, \
.volt_table = voltages, \
.vsel_reg = (base) + SW_RUN_VOLT, \
.vsel_mask = 0xff, \
+ .curr_table = pf8x00_sw_current_table, \
+ .n_current_limits = \
+ ARRAY_SIZE(pf8x00_sw_current_table), \
+ .csel_reg = (base) + SW_CONFIG2, \
+ .csel_mask = PF8X00_SWXILIM_MASK, \
.enable_reg = (base) + SW_MODE1, \
.enable_val = 0x3, \
.disable_val = 0x0, \
@@ -335,6 +464,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
}, \
}
+
#define PF8X00VSNVS(_name, base, voltages) \
[PF8X00_VSNVS] = { \
.desc = { \
@@ -352,7 +482,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
}, \
}
-static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
+static struct pf8x00_regulator_data pf8x00_regs_data[PF8X00_MAX_REGULATORS] = {
PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages),
PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages),
PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages),
@@ -363,7 +493,7 @@ static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages),
PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages),
PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages),
- PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
+ PF8X00BUCK7("buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages),
};
@@ -399,7 +529,7 @@ static int pf8x00_identify(struct pf8x00_chip *chip)
name = "PF8121A";
break;
case PF8200:
- name = "PF8100";
+ name = "PF8200";
break;
default:
dev_err(chip->dev, "Unknown pf8x00 device id 0x%x\n", dev_id);
@@ -437,12 +567,12 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
if (ret)
return ret;
- for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) {
- struct pf8x00_regulator *data = &pf8x00_regulators_data[id];
+ for (id = 0; id < ARRAY_SIZE(pf8x00_regs_data); id++) {
+ struct pf8x00_regulator_data *data = &pf8x00_regs_data[id];
struct regulator_dev *rdev;
config.dev = chip->dev;
- config.driver_data = chip;
+ config.driver_data = data;
config.regmap = chip->regmap;
rdev = devm_regulator_register(&client->dev, &data->desc, &config);
@@ -451,18 +581,6 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
"failed to register %s regulator\n", data->desc.name);
return PTR_ERR(rdev);
}
-
- if ((id >= PF8X00_BUCK1) && (id <= PF8X00_BUCK7)) {
- u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2;
-
- regmap_update_bits(chip->regmap, reg,
- PF8X00_SWXPHASE_MASK,
- data->phase_shift);
-
- regmap_update_bits(chip->regmap, reg,
- PF8X00_SWXILIM_MASK,
- data->ilim << PF8X00_SWXILIM_SHIFT);
- }
}
return 0;
diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
index 8ccf572394a2..de25e3279b4b 100644
--- a/drivers/regulator/qcom-labibb-regulator.c
+++ b/drivers/regulator/qcom-labibb-regulator.c
@@ -17,11 +17,48 @@
#define PMI8998_LAB_REG_BASE 0xde00
#define PMI8998_IBB_REG_BASE 0xdc00
+#define PMI8998_IBB_LAB_REG_OFFSET 0x200
#define REG_LABIBB_STATUS1 0x08
+ #define LABIBB_STATUS1_SC_BIT BIT(6)
+ #define LABIBB_STATUS1_VREG_OK_BIT BIT(7)
+
+#define REG_LABIBB_INT_SET_TYPE 0x11
+#define REG_LABIBB_INT_POLARITY_HIGH 0x12
+#define REG_LABIBB_INT_POLARITY_LOW 0x13
+#define REG_LABIBB_INT_LATCHED_CLR 0x14
+#define REG_LABIBB_INT_EN_SET 0x15
+#define REG_LABIBB_INT_EN_CLR 0x16
+ #define LABIBB_INT_VREG_OK BIT(0)
+ #define LABIBB_INT_VREG_TYPE_LEVEL 0
+
+#define REG_LABIBB_VOLTAGE 0x41
+ #define LABIBB_VOLTAGE_OVERRIDE_EN BIT(7)
+ #define LAB_VOLTAGE_SET_MASK GENMASK(3, 0)
+ #define IBB_VOLTAGE_SET_MASK GENMASK(5, 0)
+
#define REG_LABIBB_ENABLE_CTL 0x46
-#define LABIBB_STATUS1_VREG_OK_BIT BIT(7)
-#define LABIBB_CONTROL_ENABLE BIT(7)
+ #define LABIBB_CONTROL_ENABLE BIT(7)
+
+#define REG_LABIBB_PD_CTL 0x47
+ #define LAB_PD_CTL_MASK GENMASK(1, 0)
+ #define IBB_PD_CTL_MASK (BIT(0) | BIT(7))
+ #define LAB_PD_CTL_STRONG_PULL BIT(0)
+ #define IBB_PD_CTL_HALF_STRENGTH BIT(0)
+ #define IBB_PD_CTL_EN BIT(7)
+
+#define REG_LABIBB_CURRENT_LIMIT 0x4b
+ #define LAB_CURRENT_LIMIT_MASK GENMASK(2, 0)
+ #define IBB_CURRENT_LIMIT_MASK GENMASK(4, 0)
+ #define LAB_CURRENT_LIMIT_OVERRIDE_EN BIT(3)
+ #define LABIBB_CURRENT_LIMIT_EN BIT(7)
+
+#define REG_IBB_PWRUP_PWRDN_CTL_1 0x58
+ #define IBB_CTL_1_DISCHARGE_EN BIT(2)
+
+#define REG_LABIBB_SOFT_START_CTL 0x5f
+#define REG_LABIBB_SEC_ACCESS 0xd0
+ #define LABIBB_SEC_UNLOCK_CODE 0xa5
#define LAB_ENABLE_CTL_MASK BIT(7)
#define IBB_ENABLE_CTL_MASK (BIT(7) | BIT(6))
@@ -30,14 +67,35 @@
#define LAB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 2)
#define IBB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 10)
#define LABIBB_POLL_ENABLED_TIME 1000
+#define OCP_RECOVERY_INTERVAL_MS 500
+#define SC_RECOVERY_INTERVAL_MS 250
+#define LABIBB_MAX_OCP_COUNT 4
+#define LABIBB_MAX_SC_COUNT 3
+#define LABIBB_MAX_FATAL_COUNT 2
+
+struct labibb_current_limits {
+ u32 uA_min;
+ u32 uA_step;
+ u8 ovr_val;
+};
struct labibb_regulator {
struct regulator_desc desc;
struct device *dev;
struct regmap *regmap;
struct regulator_dev *rdev;
+ struct labibb_current_limits uA_limits;
+ struct delayed_work ocp_recovery_work;
+ struct delayed_work sc_recovery_work;
u16 base;
u8 type;
+ u8 dischg_sel;
+ u8 soft_start_sel;
+ int sc_irq;
+ int sc_count;
+ int ocp_irq;
+ int ocp_irq_count;
+ int fatal_count;
};
struct labibb_regulator_data {
@@ -47,10 +105,579 @@ struct labibb_regulator_data {
const struct regulator_desc *desc;
};
+static int qcom_labibb_ocp_hw_enable(struct regulator_dev *rdev)
+{
+ struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+ int ret;
+
+ /* Clear irq latch status to avoid spurious event */
+ ret = regmap_update_bits(rdev->regmap,
+ vreg->base + REG_LABIBB_INT_LATCHED_CLR,
+ LABIBB_INT_VREG_OK, 1);
+ if (ret)
+ return ret;
+
+ /* Enable OCP HW interrupt */
+ return regmap_update_bits(rdev->regmap,
+ vreg->base + REG_LABIBB_INT_EN_SET,
+ LABIBB_INT_VREG_OK, 1);
+}
+
+static int qcom_labibb_ocp_hw_disable(struct regulator_dev *rdev)
+{
+ struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+
+ return regmap_update_bits(rdev->regmap,
+ vreg->base + REG_LABIBB_INT_EN_CLR,
+ LABIBB_INT_VREG_OK, 1);
+}
+
+/**
+ * qcom_labibb_check_ocp_status - Check the Over-Current Protection status
+ * @vreg: Main driver structure
+ *
+ * This function checks the STATUS1 register for the VREG_OK bit: if it is
+ * set, then there is no Over-Current event.
+ *
+ * Returns: Zero if there is no over-current, 1 if in over-current or
+ * negative number for error
+ */
+static int qcom_labibb_check_ocp_status(struct labibb_regulator *vreg)
+{
+ u32 cur_status;
+ int ret;
+
+ ret = regmap_read(vreg->rdev->regmap, vreg->base + REG_LABIBB_STATUS1,
+ &cur_status);
+ if (ret)
+ return ret;
+
+ return !(cur_status & LABIBB_STATUS1_VREG_OK_BIT);
+}
+
+/**
+ * qcom_labibb_ocp_recovery_worker - Handle OCP event
+ * @work: OCP work structure
+ *
+ * This is the worker function to handle the Over Current Protection
+ * hardware event; This will check if the hardware is still
+ * signaling an over-current condition and will eventually stop
+ * the regulator if such condition is still signaled after
+ * LABIBB_MAX_OCP_COUNT times.
+ *
+ * If the driver that is consuming the regulator did not take action
+ * for the OCP condition, or the hardware did not stabilize, a cut
+ * of the LAB and IBB regulators will be forced (regulators will be
+ * disabled).
+ *
+ * As last, if the writes to shut down the LAB/IBB regulators fail
+ * for more than LABIBB_MAX_FATAL_COUNT, then a kernel panic will be
+ * triggered, as a last resort to protect the hardware from burning;
+ * this, however, is expected to never happen, but this is kept to
+ * try to further ensure that we protect the hardware at all costs.
+ */
+static void qcom_labibb_ocp_recovery_worker(struct work_struct *work)
+{
+ struct labibb_regulator *vreg;
+ const struct regulator_ops *ops;
+ int ret;
+
+ vreg = container_of(work, struct labibb_regulator,
+ ocp_recovery_work.work);
+ ops = vreg->rdev->desc->ops;
+
+ if (vreg->ocp_irq_count >= LABIBB_MAX_OCP_COUNT) {
+ /*
+ * If we tried to disable the regulator multiple times but
+ * we kept failing, there's only one last hope to save our
+ * hardware from the death: raise a kernel bug, reboot and
+ * hope that the bootloader kindly saves us. This, though
+ * is done only as paranoid checking, because failing the
+ * regmap write to disable the vreg is almost impossible,
+ * since we got here after multiple regmap R/W.
+ */
+ BUG_ON(vreg->fatal_count > LABIBB_MAX_FATAL_COUNT);
+ dev_err(&vreg->rdev->dev, "LABIBB: CRITICAL: Disabling regulator\n");
+
+ /* Disable the regulator immediately to avoid damage */
+ ret = ops->disable(vreg->rdev);
+ if (ret) {
+ vreg->fatal_count++;
+ goto reschedule;
+ }
+ enable_irq(vreg->ocp_irq);
+ vreg->fatal_count = 0;
+ return;
+ }
+
+ ret = qcom_labibb_check_ocp_status(vreg);
+ if (ret != 0) {
+ vreg->ocp_irq_count++;
+ goto reschedule;
+ }
+
+ ret = qcom_labibb_ocp_hw_enable(vreg->rdev);
+ if (ret) {
+ /* We cannot trust it without OCP enabled. */
+ dev_err(vreg->dev, "Cannot enable OCP IRQ\n");
+ vreg->ocp_irq_count++;
+ goto reschedule;
+ }
+
+ enable_irq(vreg->ocp_irq);
+ /* Everything went fine: reset the OCP count! */
+ vreg->ocp_irq_count = 0;
+ return;
+
+reschedule:
+ mod_delayed_work(system_wq, &vreg->ocp_recovery_work,
+ msecs_to_jiffies(OCP_RECOVERY_INTERVAL_MS));
+}
+
+/**
+ * qcom_labibb_ocp_isr - Interrupt routine for OverCurrent Protection
+ * @irq: Interrupt number
+ * @chip: Main driver structure
+ *
+ * Over Current Protection (OCP) will signal to the client driver
+ * that an over-current event has happened and then will schedule
+ * a recovery worker.
+ *
+ * Disabling and eventually re-enabling the regulator is expected
+ * to be done by the driver, as some hardware may be triggering an
+ * over-current condition only at first initialization or it may
+ * be expected only for a very brief amount of time, after which
+ * the attached hardware may be expected to stabilize its current
+ * draw.
+ *
+ * Returns: IRQ_HANDLED for success or IRQ_NONE for failure.
+ */
+static irqreturn_t qcom_labibb_ocp_isr(int irq, void *chip)
+{
+ struct labibb_regulator *vreg = chip;
+ const struct regulator_ops *ops = vreg->rdev->desc->ops;
+ int ret;
+
+ /* If the regulator is not enabled, this is a fake event */
+ if (!ops->is_enabled(vreg->rdev))
+ return 0;
+
+ /* If we tried to recover for too many times it's not getting better */
+ if (vreg->ocp_irq_count > LABIBB_MAX_OCP_COUNT)
+ return IRQ_NONE;
+
+ /*
+ * If we (unlikely) can't read this register, to prevent hardware
+ * damage at all costs, we assume that the overcurrent event was
+ * real; Moreover, if the status register is not signaling OCP,
+ * it was a spurious event, so it's all ok.
+ */
+ ret = qcom_labibb_check_ocp_status(vreg);
+ if (ret == 0) {
+ vreg->ocp_irq_count = 0;
+ goto end;
+ }
+ vreg->ocp_irq_count++;
+
+ /*
+ * Disable the interrupt temporarily, or it will fire continuously;
+ * we will re-enable it in the recovery worker function.
+ */
+ disable_irq_nosync(irq);
+
+ /* Warn the user for overcurrent */
+ dev_warn(vreg->dev, "Over-Current interrupt fired!\n");
+
+ /* Disable the interrupt to avoid hogging */
+ ret = qcom_labibb_ocp_hw_disable(vreg->rdev);
+ if (ret)
+ goto end;
+
+ /* Signal overcurrent event to drivers */
+ regulator_notifier_call_chain(vreg->rdev,
+ REGULATOR_EVENT_OVER_CURRENT, NULL);
+
+end:
+ /* Schedule the recovery work */
+ schedule_delayed_work(&vreg->ocp_recovery_work,
+ msecs_to_jiffies(OCP_RECOVERY_INTERVAL_MS));
+ if (ret)
+ return IRQ_NONE;
+
+ return IRQ_HANDLED;
+}
+
+static int qcom_labibb_set_ocp(struct regulator_dev *rdev)
+{
+ struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+ char *ocp_irq_name;
+ u32 irq_flags = IRQF_ONESHOT;
+ int irq_trig_low, ret;
+
+ /* If there is no OCP interrupt, there's nothing to set */
+ if (vreg->ocp_irq <= 0)
+ return -EINVAL;
+
+ ocp_irq_name = devm_kasprintf(vreg->dev, GFP_KERNEL, "%s-over-current",
+ vreg->desc.name);
+ if (!ocp_irq_name)
+ return -ENOMEM;
+
+ /* IRQ polarities - LAB: trigger-low, IBB: trigger-high */
+ switch (vreg->type) {
+ case QCOM_LAB_TYPE:
+ irq_flags |= IRQF_TRIGGER_LOW;
+ irq_trig_low = 1;
+ break;
+ case QCOM_IBB_TYPE:
+ irq_flags |= IRQF_TRIGGER_HIGH;
+ irq_trig_low = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Activate OCP HW level interrupt */
+ ret = regmap_update_bits(rdev->regmap,
+ vreg->base + REG_LABIBB_INT_SET_TYPE,
+ LABIBB_INT_VREG_OK,
+ LABIBB_INT_VREG_TYPE_LEVEL);
+ if (ret)
+ return ret;
+
+ /* Set OCP interrupt polarity */
+ ret = regmap_update_bits(rdev->regmap,
+ vreg->base + REG_LABIBB_INT_POLARITY_HIGH,
+ LABIBB_INT_VREG_OK, !irq_trig_low);
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(rdev->regmap,
+ vreg->base + REG_LABIBB_INT_POLARITY_LOW,
+ LABIBB_INT_VREG_OK, irq_trig_low);
+ if (ret)
+ return ret;
+
+ ret = qcom_labibb_ocp_hw_enable(rdev);
+ if (ret)
+ return ret;
+
+ return devm_request_threaded_irq(vreg->dev, vreg->ocp_irq, NULL,
+ qcom_labibb_ocp_isr, irq_flags,
+ ocp_irq_name, vreg);
+}
+
+/**
+ * qcom_labibb_check_sc_status - Check the Short Circuit Protection status
+ * @vreg: Main driver structure
+ *
+ * This function checks the STATUS1 register on both LAB and IBB regulators
+ * for the ShortCircuit bit: if it is set on *any* of them, then we have
+ * experienced a short-circuit event.
+ *
+ * Returns: Zero if there is no short-circuit, 1 if in short-circuit or
+ * negative number for error
+ */
+static int qcom_labibb_check_sc_status(struct labibb_regulator *vreg)
+{
+ u32 ibb_status, ibb_reg, lab_status, lab_reg;
+ int ret;
+
+ /* We have to work on both regulators due to PBS... */
+ lab_reg = ibb_reg = vreg->base + REG_LABIBB_STATUS1;
+ if (vreg->type == QCOM_LAB_TYPE)
+ ibb_reg -= PMI8998_IBB_LAB_REG_OFFSET;
+ else
+ lab_reg += PMI8998_IBB_LAB_REG_OFFSET;
+
+ ret = regmap_read(vreg->rdev->regmap, lab_reg, &lab_status);
+ if (ret)
+ return ret;
+ ret = regmap_read(vreg->rdev->regmap, ibb_reg, &ibb_status);
+ if (ret)
+ return ret;
+
+ return !!(lab_status & LABIBB_STATUS1_SC_BIT) ||
+ !!(ibb_status & LABIBB_STATUS1_SC_BIT);
+}
+
+/**
+ * qcom_labibb_sc_recovery_worker - Handle Short Circuit event
+ * @work: SC work structure
+ *
+ * This is the worker function to handle the Short Circuit Protection
+ * hardware event; This will check if the hardware is still
+ * signaling a short-circuit condition and will eventually never
+ * re-enable the regulator if such condition is still signaled after
+ * LABIBB_MAX_SC_COUNT times.
+ *
+ * If the driver that is consuming the regulator did not take action
+ * for the SC condition, or the hardware did not stabilize, this
+ * worker will stop rescheduling, leaving the regulators disabled
+ * as already done by the Portable Batch System (PBS).
+ *
+ * Returns: IRQ_HANDLED for success or IRQ_NONE for failure.
+ */
+static void qcom_labibb_sc_recovery_worker(struct work_struct *work)
+{
+ struct labibb_regulator *vreg;
+ const struct regulator_ops *ops;
+ u32 lab_reg, ibb_reg, lab_val, ibb_val, val;
+ bool pbs_cut = false;
+ int i, sc, ret;
+
+ vreg = container_of(work, struct labibb_regulator,
+ sc_recovery_work.work);
+ ops = vreg->rdev->desc->ops;
+
+ /*
+ * If we tried to check the regulator status multiple times but we
+ * kept failing, then just bail out, as the Portable Batch System
+ * (PBS) will disable the vregs for us, preventing hardware damage.
+ */
+ if (vreg->fatal_count > LABIBB_MAX_FATAL_COUNT)
+ return;
+
+ /* Too many short-circuit events. Throw in the towel. */
+ if (vreg->sc_count > LABIBB_MAX_SC_COUNT)
+ return;
+
+ /*
+ * The Portable Batch System (PBS) automatically disables LAB
+ * and IBB when a short-circuit event is detected, so we have to
+ * check and work on both of them at the same time.
+ */
+ lab_reg = ibb_reg = vreg->base + REG_LABIBB_ENABLE_CTL;
+ if (vreg->type == QCOM_LAB_TYPE)
+ ibb_reg -= PMI8998_IBB_LAB_REG_OFFSET;
+ else
+ lab_reg += PMI8998_IBB_LAB_REG_OFFSET;
+
+ sc = qcom_labibb_check_sc_status(vreg);
+ if (sc)
+ goto reschedule;
+
+ for (i = 0; i < LABIBB_MAX_SC_COUNT; i++) {
+ ret = regmap_read(vreg->regmap, lab_reg, &lab_val);
+ if (ret) {
+ vreg->fatal_count++;
+ goto reschedule;
+ }
+
+ ret = regmap_read(vreg->regmap, ibb_reg, &ibb_val);
+ if (ret) {
+ vreg->fatal_count++;
+ goto reschedule;
+ }
+ val = lab_val & ibb_val;
+
+ if (!(val & LABIBB_CONTROL_ENABLE)) {
+ pbs_cut = true;
+ break;
+ }
+ usleep_range(5000, 6000);
+ }
+ if (pbs_cut)
+ goto reschedule;
+
+
+ /*
+ * If we have reached this point, we either have successfully
+ * recovered from the SC condition or we had a spurious SC IRQ,
+ * which means that we can re-enable the regulators, if they
+ * have ever been disabled by the PBS.
+ */
+ ret = ops->enable(vreg->rdev);
+ if (ret)
+ goto reschedule;
+
+ /* Everything went fine: reset the OCP count! */
+ vreg->sc_count = 0;
+ enable_irq(vreg->sc_irq);
+ return;
+
+reschedule:
+ /*
+ * Now that we have done basic handling of the short-circuit,
+ * reschedule this worker in the regular system workqueue, as
+ * taking action is not truly urgent anymore.
+ */
+ vreg->sc_count++;
+ mod_delayed_work(system_wq, &vreg->sc_recovery_work,
+ msecs_to_jiffies(SC_RECOVERY_INTERVAL_MS));
+}
+
+/**
+ * qcom_labibb_sc_isr - Interrupt routine for Short Circuit Protection
+ * @irq: Interrupt number
+ * @chip: Main driver structure
+ *
+ * Short Circuit Protection (SCP) will signal to the client driver
+ * that a regulation-out event has happened and then will schedule
+ * a recovery worker.
+ *
+ * The LAB and IBB regulators will be automatically disabled by the
+ * Portable Batch System (PBS) and they will be enabled again by
+ * the worker function if the hardware stops signaling the short
+ * circuit event.
+ *
+ * Returns: IRQ_HANDLED for success or IRQ_NONE for failure.
+ */
+static irqreturn_t qcom_labibb_sc_isr(int irq, void *chip)
+{
+ struct labibb_regulator *vreg = chip;
+
+ if (vreg->sc_count > LABIBB_MAX_SC_COUNT)
+ return IRQ_NONE;
+
+ /* Warn the user for short circuit */
+ dev_warn(vreg->dev, "Short-Circuit interrupt fired!\n");
+
+ /*
+ * Disable the interrupt temporarily, or it will fire continuously;
+ * we will re-enable it in the recovery worker function.
+ */
+ disable_irq_nosync(irq);
+
+ /* Signal out of regulation event to drivers */
+ regulator_notifier_call_chain(vreg->rdev,
+ REGULATOR_EVENT_REGULATION_OUT, NULL);
+
+ /* Schedule the short-circuit handling as high-priority work */
+ mod_delayed_work(system_highpri_wq, &vreg->sc_recovery_work,
+ msecs_to_jiffies(SC_RECOVERY_INTERVAL_MS));
+ return IRQ_HANDLED;
+}
+
+
+static int qcom_labibb_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+ struct regulator_desc *desc = &vreg->desc;
+ struct labibb_current_limits *lim = &vreg->uA_limits;
+ u32 mask, val;
+ int i, ret, sel = -1;
+
+ if (min_uA < lim->uA_min || max_uA < lim->uA_min)
+ return -EINVAL;
+
+ for (i = 0; i < desc->n_current_limits; i++) {
+ int uA_limit = (lim->uA_step * i) + lim->uA_min;
+
+ if (max_uA >= uA_limit && min_uA <= uA_limit)
+ sel = i;
+ }
+ if (sel < 0)
+ return -EINVAL;
+
+ /* Current limit setting needs secure access */
+ ret = regmap_write(vreg->regmap, vreg->base + REG_LABIBB_SEC_ACCESS,
+ LABIBB_SEC_UNLOCK_CODE);
+ if (ret)
+ return ret;
+
+ mask = desc->csel_mask | lim->ovr_val;
+ mask |= LABIBB_CURRENT_LIMIT_EN;
+ val = (u32)sel | lim->ovr_val;
+ val |= LABIBB_CURRENT_LIMIT_EN;
+
+ return regmap_update_bits(vreg->regmap, desc->csel_reg, mask, val);
+}
+
+static int qcom_labibb_get_current_limit(struct regulator_dev *rdev)
+{
+ struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+ struct regulator_desc *desc = &vreg->desc;
+ struct labibb_current_limits *lim = &vreg->uA_limits;
+ unsigned int cur_step;
+ int ret;
+
+ ret = regmap_read(vreg->regmap, desc->csel_reg, &cur_step);
+ if (ret)
+ return ret;
+ cur_step &= desc->csel_mask;
+
+ return (cur_step * lim->uA_step) + lim->uA_min;
+}
+
+static int qcom_labibb_set_soft_start(struct regulator_dev *rdev)
+{
+ struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+ u32 val = 0;
+
+ if (vreg->type == QCOM_IBB_TYPE)
+ val = vreg->dischg_sel;
+ else
+ val = vreg->soft_start_sel;
+
+ return regmap_write(rdev->regmap, rdev->desc->soft_start_reg, val);
+}
+
+static int qcom_labibb_get_table_sel(const int *table, int sz, u32 value)
+{
+ int i;
+
+ for (i = 0; i < sz; i++)
+ if (table[i] == value)
+ return i;
+ return -EINVAL;
+}
+
+/* IBB discharge resistor values in KOhms */
+static const int dischg_resistor_values[] = { 300, 64, 32, 16 };
+
+/* Soft start time in microseconds */
+static const int soft_start_values[] = { 200, 400, 600, 800 };
+
+static int qcom_labibb_of_parse_cb(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+ struct labibb_regulator *vreg = config->driver_data;
+ u32 dischg_kohms, soft_start_time;
+ int ret;
+
+ ret = of_property_read_u32(np, "qcom,discharge-resistor-kohms",
+ &dischg_kohms);
+ if (ret)
+ dischg_kohms = 300;
+
+ ret = qcom_labibb_get_table_sel(dischg_resistor_values,
+ ARRAY_SIZE(dischg_resistor_values),
+ dischg_kohms);
+ if (ret < 0)
+ return ret;
+ vreg->dischg_sel = (u8)ret;
+
+ ret = of_property_read_u32(np, "qcom,soft-start-us",
+ &soft_start_time);
+ if (ret)
+ soft_start_time = 200;
+
+ ret = qcom_labibb_get_table_sel(soft_start_values,
+ ARRAY_SIZE(soft_start_values),
+ soft_start_time);
+ if (ret < 0)
+ return ret;
+ vreg->soft_start_sel = (u8)ret;
+
+ return 0;
+}
+
static const struct regulator_ops qcom_labibb_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .set_pull_down = regulator_set_pull_down_regmap,
+ .set_current_limit = qcom_labibb_set_current_limit,
+ .get_current_limit = qcom_labibb_get_current_limit,
+ .set_soft_start = qcom_labibb_set_soft_start,
+ .set_over_current_protection = qcom_labibb_set_ocp,
};
static const struct regulator_desc pmi8998_lab_desc = {
@@ -59,10 +686,25 @@ static const struct regulator_desc pmi8998_lab_desc = {
.enable_val = LABIBB_CONTROL_ENABLE,
.enable_time = LAB_ENABLE_TIME,
.poll_enabled_time = LABIBB_POLL_ENABLED_TIME,
+ .soft_start_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_SOFT_START_CTL),
+ .pull_down_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_PD_CTL),
+ .pull_down_mask = LAB_PD_CTL_MASK,
+ .pull_down_val_on = LAB_PD_CTL_STRONG_PULL,
+ .vsel_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE),
+ .vsel_mask = LAB_VOLTAGE_SET_MASK,
+ .apply_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE),
+ .apply_bit = LABIBB_VOLTAGE_OVERRIDE_EN,
+ .csel_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_CURRENT_LIMIT),
+ .csel_mask = LAB_CURRENT_LIMIT_MASK,
+ .n_current_limits = 8,
.off_on_delay = LABIBB_OFF_ON_DELAY,
.owner = THIS_MODULE,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 4600000,
+ .uV_step = 100000,
+ .n_voltages = 16,
.ops = &qcom_labibb_ops,
+ .of_parse_cb = qcom_labibb_of_parse_cb,
};
static const struct regulator_desc pmi8998_ibb_desc = {
@@ -71,10 +713,29 @@ static const struct regulator_desc pmi8998_ibb_desc = {
.enable_val = LABIBB_CONTROL_ENABLE,
.enable_time = IBB_ENABLE_TIME,
.poll_enabled_time = LABIBB_POLL_ENABLED_TIME,
+ .soft_start_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_SOFT_START_CTL),
+ .active_discharge_off = 0,
+ .active_discharge_on = IBB_CTL_1_DISCHARGE_EN,
+ .active_discharge_mask = IBB_CTL_1_DISCHARGE_EN,
+ .active_discharge_reg = (PMI8998_IBB_REG_BASE + REG_IBB_PWRUP_PWRDN_CTL_1),
+ .pull_down_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_PD_CTL),
+ .pull_down_mask = IBB_PD_CTL_MASK,
+ .pull_down_val_on = IBB_PD_CTL_HALF_STRENGTH | IBB_PD_CTL_EN,
+ .vsel_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE),
+ .vsel_mask = IBB_VOLTAGE_SET_MASK,
+ .apply_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE),
+ .apply_bit = LABIBB_VOLTAGE_OVERRIDE_EN,
+ .csel_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_CURRENT_LIMIT),
+ .csel_mask = IBB_CURRENT_LIMIT_MASK,
+ .n_current_limits = 32,
.off_on_delay = LABIBB_OFF_ON_DELAY,
.owner = THIS_MODULE,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1400000,
+ .uV_step = 100000,
+ .n_voltages = 64,
.ops = &qcom_labibb_ops,
+ .of_parse_cb = qcom_labibb_of_parse_cb,
};
static const struct labibb_regulator_data pmi8998_labibb_data[] = {
@@ -94,7 +755,7 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev)
struct labibb_regulator *vreg;
struct device *dev = &pdev->dev;
struct regulator_config cfg = {};
-
+ struct device_node *reg_node;
const struct of_device_id *match;
const struct labibb_regulator_data *reg_data;
struct regmap *reg_regmap;
@@ -112,6 +773,8 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev)
return -ENODEV;
for (reg_data = match->data; reg_data->name; reg_data++) {
+ char *sc_irq_name;
+ int irq = 0;
/* Validate if the type of regulator is indeed
* what's mentioned in DT.
@@ -134,10 +797,61 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev)
if (!vreg)
return -ENOMEM;
+ sc_irq_name = devm_kasprintf(dev, GFP_KERNEL,
+ "%s-short-circuit",
+ reg_data->name);
+ if (!sc_irq_name)
+ return -ENOMEM;
+
+ reg_node = of_get_child_by_name(pdev->dev.of_node,
+ reg_data->name);
+ if (!reg_node)
+ return -EINVAL;
+
+ /* The Short Circuit interrupt is critical */
+ irq = of_irq_get_byname(reg_node, "sc-err");
+ if (irq <= 0) {
+ if (irq == 0)
+ irq = -EINVAL;
+
+ return dev_err_probe(vreg->dev, irq,
+ "Short-circuit irq not found.\n");
+ }
+ vreg->sc_irq = irq;
+
+ /* OverCurrent Protection IRQ is optional */
+ irq = of_irq_get_byname(reg_node, "ocp");
+ vreg->ocp_irq = irq;
+ vreg->ocp_irq_count = 0;
+ of_node_put(reg_node);
+
vreg->regmap = reg_regmap;
vreg->dev = dev;
vreg->base = reg_data->base;
vreg->type = reg_data->type;
+ INIT_DELAYED_WORK(&vreg->sc_recovery_work,
+ qcom_labibb_sc_recovery_worker);
+
+ if (vreg->ocp_irq > 0)
+ INIT_DELAYED_WORK(&vreg->ocp_recovery_work,
+ qcom_labibb_ocp_recovery_worker);
+
+ switch (vreg->type) {
+ case QCOM_LAB_TYPE:
+ /* LAB Limits: 200-1600mA */
+ vreg->uA_limits.uA_min = 200000;
+ vreg->uA_limits.uA_step = 200000;
+ vreg->uA_limits.ovr_val = LAB_CURRENT_LIMIT_OVERRIDE_EN;
+ break;
+ case QCOM_IBB_TYPE:
+ /* IBB Limits: 0-1550mA */
+ vreg->uA_limits.uA_min = 0;
+ vreg->uA_limits.uA_step = 50000;
+ vreg->uA_limits.ovr_val = 0; /* No override bit */
+ break;
+ default:
+ return -EINVAL;
+ }
memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc));
vreg->desc.of_match = reg_data->name;
@@ -155,6 +869,14 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev)
reg_data->name, ret);
return PTR_ERR(vreg->rdev);
}
+
+ ret = devm_request_threaded_irq(vreg->dev, vreg->sc_irq, NULL,
+ qcom_labibb_sc_isr,
+ IRQF_ONESHOT |
+ IRQF_TRIGGER_RISING,
+ sc_irq_name, vreg);
+ if (ret)
+ return ret;
}
return 0;
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index c395a8dda6f7..79a554f1029d 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -732,6 +732,15 @@ static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
};
+static const struct rpmh_vreg_hw_data pmic5_hfsmps515_1 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(900000, 0, 4, 16000),
+ .n_voltages = 5,
+ .pmic_mode_map = pmic_mode_map_pmic5_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
static const struct rpmh_vreg_hw_data pmic5_bob = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_bypass_ops,
@@ -928,6 +937,19 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"),
RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l7"),
+ {},
+};
+
+static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515_1, "vdd-s2"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo7", "ldo%s6", &pmic5_pldo_lv, "vdd-l7"),
{},
};
@@ -1058,6 +1080,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
.data = pm8009_vreg_data,
},
{
+ .compatible = "qcom,pm8009-1-rpmh-regulators",
+ .data = pm8009_1_vreg_data,
+ },
+ {
.compatible = "qcom,pm8150-rpmh-regulators",
.data = pm8150_vreg_data,
},
@@ -1090,6 +1116,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
.data = pm6150l_vreg_data,
},
{
+ .compatible = "qcom,pmc8180-rpmh-regulators",
+ .data = pm8150_vreg_data,
+ },
+ {
+ .compatible = "qcom,pmc8180c-rpmh-regulators",
+ .data = pm8150l_vreg_data,
+ },
+ {
.compatible = "qcom,pmx55-rpmh-regulators",
.data = pmx55_vreg_data,
},
diff --git a/drivers/regulator/rohm-regulator.c b/drivers/regulator/rohm-regulator.c
index 399002383b28..5c558b153d55 100644
--- a/drivers/regulator/rohm-regulator.c
+++ b/drivers/regulator/rohm-regulator.c
@@ -52,9 +52,12 @@ int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs,
char *prop;
unsigned int reg, mask, omask, oreg = desc->enable_reg;
- for (i = 0; i < ROHM_DVS_LEVEL_MAX && !ret; i++) {
- if (dvs->level_map & (1 << i)) {
- switch (i + 1) {
+ for (i = 0; i < ROHM_DVS_LEVEL_VALID_AMOUNT && !ret; i++) {
+ int bit;
+
+ bit = BIT(i);
+ if (dvs->level_map & bit) {
+ switch (bit) {
case ROHM_DVS_LEVEL_RUN:
prop = "rohm,dvs-run-voltage";
reg = dvs->run_reg;
diff --git a/drivers/regulator/rt4831-regulator.c b/drivers/regulator/rt4831-regulator.c
new file mode 100644
index 000000000000..3d4695ded629
--- /dev/null
+++ b/drivers/regulator/rt4831-regulator.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+
+enum {
+ DSV_OUT_VLCM = 0,
+ DSV_OUT_VPOS,
+ DSV_OUT_VNEG,
+ DSV_OUT_MAX
+};
+
+#define RT4831_REG_DSVEN 0x09
+#define RT4831_REG_VLCM 0x0c
+#define RT4831_REG_VPOS 0x0d
+#define RT4831_REG_VNEG 0x0e
+#define RT4831_REG_FLAGS 0x0f
+
+#define RT4831_VOLT_MASK GENMASK(5, 0)
+#define RT4831_DSVMODE_SHIFT 5
+#define RT4831_DSVMODE_MASK GENMASK(7, 5)
+#define RT4831_POSADEN_MASK BIT(4)
+#define RT4831_NEGADEN_MASK BIT(3)
+#define RT4831_POSEN_MASK BIT(2)
+#define RT4831_NEGEN_MASK BIT(1)
+
+#define RT4831_OTP_MASK BIT(6)
+#define RT4831_LCMOVP_MASK BIT(5)
+#define RT4831_VPOSSCP_MASK BIT(3)
+#define RT4831_VNEGSCP_MASK BIT(2)
+
+#define DSV_MODE_NORMAL (0x4 << RT4831_DSVMODE_SHIFT)
+#define DSV_MODE_BYPASS (0x6 << RT4831_DSVMODE_SHIFT)
+#define STEP_UV 50000
+#define VLCM_MIN_UV 4000000
+#define VLCM_MAX_UV 7150000
+#define VLCM_N_VOLTAGES ((VLCM_MAX_UV - VLCM_MIN_UV) / STEP_UV + 1)
+#define VPN_MIN_UV 4000000
+#define VPN_MAX_UV 6500000
+#define VPN_N_VOLTAGES ((VPN_MAX_UV - VPN_MIN_UV) / STEP_UV + 1)
+
+static int rt4831_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int rid = rdev_get_id(rdev);
+ unsigned int val, events = 0;
+ int ret;
+
+ ret = regmap_read(regmap, RT4831_REG_FLAGS, &val);
+ if (ret)
+ return ret;
+
+ if (val & RT4831_OTP_MASK)
+ events |= REGULATOR_ERROR_OVER_TEMP;
+
+ if (rid == DSV_OUT_VLCM && (val & RT4831_LCMOVP_MASK))
+ events |= REGULATOR_ERROR_OVER_CURRENT;
+
+ if (rid == DSV_OUT_VPOS && (val & RT4831_VPOSSCP_MASK))
+ events |= REGULATOR_ERROR_OVER_CURRENT;
+
+ if (rid == DSV_OUT_VNEG && (val & RT4831_VNEGSCP_MASK))
+ events |= REGULATOR_ERROR_OVER_CURRENT;
+
+ *flags = events;
+ return 0;
+}
+
+static const struct regulator_ops rt4831_dsvlcm_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_bypass = regulator_set_bypass_regmap,
+ .get_bypass = regulator_get_bypass_regmap,
+ .get_error_flags = rt4831_get_error_flags,
+};
+
+static const struct regulator_ops rt4831_dsvpn_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .get_error_flags = rt4831_get_error_flags,
+};
+
+static const struct regulator_desc rt4831_regulator_descs[] = {
+ {
+ .name = "DSVLCM",
+ .ops = &rt4831_dsvlcm_ops,
+ .of_match = of_match_ptr("DSVLCM"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .id = DSV_OUT_VLCM,
+ .n_voltages = VLCM_N_VOLTAGES,
+ .min_uV = VLCM_MIN_UV,
+ .uV_step = STEP_UV,
+ .vsel_reg = RT4831_REG_VLCM,
+ .vsel_mask = RT4831_VOLT_MASK,
+ .bypass_reg = RT4831_REG_DSVEN,
+ .bypass_val_on = DSV_MODE_BYPASS,
+ .bypass_val_off = DSV_MODE_NORMAL,
+ },
+ {
+ .name = "DSVP",
+ .ops = &rt4831_dsvpn_ops,
+ .of_match = of_match_ptr("DSVP"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .id = DSV_OUT_VPOS,
+ .n_voltages = VPN_N_VOLTAGES,
+ .min_uV = VPN_MIN_UV,
+ .uV_step = STEP_UV,
+ .vsel_reg = RT4831_REG_VPOS,
+ .vsel_mask = RT4831_VOLT_MASK,
+ .enable_reg = RT4831_REG_DSVEN,
+ .enable_mask = RT4831_POSEN_MASK,
+ .active_discharge_reg = RT4831_REG_DSVEN,
+ .active_discharge_mask = RT4831_POSADEN_MASK,
+ },
+ {
+ .name = "DSVN",
+ .ops = &rt4831_dsvpn_ops,
+ .of_match = of_match_ptr("DSVN"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .id = DSV_OUT_VNEG,
+ .n_voltages = VPN_N_VOLTAGES,
+ .min_uV = VPN_MIN_UV,
+ .uV_step = STEP_UV,
+ .vsel_reg = RT4831_REG_VNEG,
+ .vsel_mask = RT4831_VOLT_MASK,
+ .enable_reg = RT4831_REG_DSVEN,
+ .enable_mask = RT4831_NEGEN_MASK,
+ .active_discharge_reg = RT4831_REG_DSVEN,
+ .active_discharge_mask = RT4831_NEGADEN_MASK,
+ }
+};
+
+static int rt4831_regulator_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+ struct regulator_dev *rdev;
+ struct regulator_config config = {};
+ int i, ret;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (IS_ERR(regmap)) {
+ dev_err(&pdev->dev, "Failed to init regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ /* Configure DSV mode to normal by default */
+ ret = regmap_update_bits(regmap, RT4831_REG_DSVEN, RT4831_DSVMODE_MASK, DSV_MODE_NORMAL);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to configure dsv mode to normal\n");
+ return ret;
+ }
+
+ config.dev = pdev->dev.parent;
+ config.regmap = regmap;
+
+ for (i = 0; i < DSV_OUT_MAX; i++) {
+ rdev = devm_regulator_register(&pdev->dev, rt4831_regulator_descs + i, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "Failed to register %d regulator\n", i);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id rt4831_regulator_match[] = {
+ { "rt4831-regulator", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, rt4831_regulator_match);
+
+static struct platform_driver rt4831_regulator_driver = {
+ .driver = {
+ .name = "rt4831-regulator",
+ },
+ .id_table = rt4831_regulator_match,
+ .probe = rt4831_regulator_probe,
+};
+module_platform_driver(rt4831_regulator_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 3fa472127e9a..7c111bbdc2af 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -544,14 +544,18 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
rdata = devm_kcalloc(&pdev->dev,
pdata->num_regulators, sizeof(*rdata),
GFP_KERNEL);
- if (!rdata)
+ if (!rdata) {
+ of_node_put(regulators_np);
return -ENOMEM;
+ }
rmode = devm_kcalloc(&pdev->dev,
pdata->num_regulators, sizeof(*rmode),
GFP_KERNEL);
- if (!rmode)
+ if (!rmode) {
+ of_node_put(regulators_np);
return -ENOMEM;
+ }
pdata->regulators = rdata;
pdata->opmode = rmode;
@@ -573,10 +577,13 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
"s5m8767,pmic-ext-control",
GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
"s5m8767");
- if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT)
+ if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT) {
rdata->ext_control_gpiod = NULL;
- else if (IS_ERR(rdata->ext_control_gpiod))
+ } else if (IS_ERR(rdata->ext_control_gpiod)) {
+ of_node_put(reg_np);
+ of_node_put(regulators_np);
return PTR_ERR(rdata->ext_control_gpiod);
+ }
rdata->id = i;
rdata->initdata = of_get_regulator_init_data(
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 524a7e4702c2..302a330c5c84 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -368,7 +368,6 @@ struct ab8500 {
int it_latchhier_num;
};
-struct ab8500_regulator_platform_data;
struct ab8500_codec_platform_data;
struct ab8500_sysctrl_platform_data;
@@ -376,11 +375,9 @@ struct ab8500_sysctrl_platform_data;
* struct ab8500_platform_data - AB8500 platform data
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
* @init: board-specific initialization after detection of ab8500
- * @regulator: machine-specific constraints for regulators
*/
struct ab8500_platform_data {
void (*init) (struct ab8500 *);
- struct ab8500_regulator_platform_data *regulator;
struct ab8500_codec_platform_data *codec;
struct ab8500_sysctrl_platform_data *sysctrl;
};
diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
index 4283b5b33e04..2b85b9deb03a 100644
--- a/include/linux/mfd/rohm-generic.h
+++ b/include/linux/mfd/rohm-generic.h
@@ -20,14 +20,12 @@ struct rohm_regmap_dev {
struct regmap *regmap;
};
-enum {
- ROHM_DVS_LEVEL_UNKNOWN,
- ROHM_DVS_LEVEL_RUN,
- ROHM_DVS_LEVEL_IDLE,
- ROHM_DVS_LEVEL_SUSPEND,
- ROHM_DVS_LEVEL_LPSR,
- ROHM_DVS_LEVEL_MAX = ROHM_DVS_LEVEL_LPSR,
-};
+#define ROHM_DVS_LEVEL_RUN BIT(0)
+#define ROHM_DVS_LEVEL_IDLE BIT(1)
+#define ROHM_DVS_LEVEL_SUSPEND BIT(2)
+#define ROHM_DVS_LEVEL_LPSR BIT(3)
+#define ROHM_DVS_LEVEL_VALID_AMOUNT 4
+#define ROHM_DVS_LEVEL_UNKNOWN 0
/**
* struct rohm_dvs_config - dynamic voltage scaling register descriptions
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
deleted file mode 100644
index 3ab1ddf151a2..000000000000
--- a/include/linux/regulator/ab8500.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
- * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
- * Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
- */
-
-#ifndef __LINUX_MFD_AB8500_REGULATOR_H
-#define __LINUX_MFD_AB8500_REGULATOR_H
-
-#include <linux/platform_device.h>
-
-/* AB8500 regulators */
-enum ab8500_regulator_id {
- AB8500_LDO_AUX1,
- AB8500_LDO_AUX2,
- AB8500_LDO_AUX3,
- AB8500_LDO_INTCORE,
- AB8500_LDO_TVOUT,
- AB8500_LDO_AUDIO,
- AB8500_LDO_ANAMIC1,
- AB8500_LDO_ANAMIC2,
- AB8500_LDO_DMIC,
- AB8500_LDO_ANA,
- AB8500_NUM_REGULATORS,
-};
-
-/* AB8505 regulators */
-enum ab8505_regulator_id {
- AB8505_LDO_AUX1,
- AB8505_LDO_AUX2,
- AB8505_LDO_AUX3,
- AB8505_LDO_AUX4,
- AB8505_LDO_AUX5,
- AB8505_LDO_AUX6,
- AB8505_LDO_INTCORE,
- AB8505_LDO_ADC,
- AB8505_LDO_AUDIO,
- AB8505_LDO_ANAMIC1,
- AB8505_LDO_ANAMIC2,
- AB8505_LDO_AUX8,
- AB8505_LDO_ANA,
- AB8505_NUM_REGULATORS,
-};
-
-/* AB8500 and AB8505 register initialization */
-struct ab8500_regulator_reg_init {
- int id;
- u8 mask;
- u8 value;
-};
-
-#define INIT_REGULATOR_REGISTER(_id, _mask, _value) \
- { \
- .id = _id, \
- .mask = _mask, \
- .value = _value, \
- }
-
-/* AB8500 registers */
-enum ab8500_regulator_reg {
- AB8500_REGUREQUESTCTRL2,
- AB8500_REGUREQUESTCTRL3,
- AB8500_REGUREQUESTCTRL4,
- AB8500_REGUSYSCLKREQ1HPVALID1,
- AB8500_REGUSYSCLKREQ1HPVALID2,
- AB8500_REGUHWHPREQ1VALID1,
- AB8500_REGUHWHPREQ1VALID2,
- AB8500_REGUHWHPREQ2VALID1,
- AB8500_REGUHWHPREQ2VALID2,
- AB8500_REGUSWHPREQVALID1,
- AB8500_REGUSWHPREQVALID2,
- AB8500_REGUSYSCLKREQVALID1,
- AB8500_REGUSYSCLKREQVALID2,
- AB8500_REGUMISC1,
- AB8500_VAUDIOSUPPLY,
- AB8500_REGUCTRL1VAMIC,
- AB8500_VPLLVANAREGU,
- AB8500_VREFDDR,
- AB8500_EXTSUPPLYREGU,
- AB8500_VAUX12REGU,
- AB8500_VRF1VAUX3REGU,
- AB8500_VAUX1SEL,
- AB8500_VAUX2SEL,
- AB8500_VRF1VAUX3SEL,
- AB8500_REGUCTRL2SPARE,
- AB8500_REGUCTRLDISCH,
- AB8500_REGUCTRLDISCH2,
- AB8500_NUM_REGULATOR_REGISTERS,
-};
-
-/* AB8505 registers */
-enum ab8505_regulator_reg {
- AB8505_REGUREQUESTCTRL1,
- AB8505_REGUREQUESTCTRL2,
- AB8505_REGUREQUESTCTRL3,
- AB8505_REGUREQUESTCTRL4,
- AB8505_REGUSYSCLKREQ1HPVALID1,
- AB8505_REGUSYSCLKREQ1HPVALID2,
- AB8505_REGUHWHPREQ1VALID1,
- AB8505_REGUHWHPREQ1VALID2,
- AB8505_REGUHWHPREQ2VALID1,
- AB8505_REGUHWHPREQ2VALID2,
- AB8505_REGUSWHPREQVALID1,
- AB8505_REGUSWHPREQVALID2,
- AB8505_REGUSYSCLKREQVALID1,
- AB8505_REGUSYSCLKREQVALID2,
- AB8505_REGUVAUX4REQVALID,
- AB8505_REGUMISC1,
- AB8505_VAUDIOSUPPLY,
- AB8505_REGUCTRL1VAMIC,
- AB8505_VSMPSAREGU,
- AB8505_VSMPSBREGU,
- AB8505_VSAFEREGU, /* NOTE! PRCMU register */
- AB8505_VPLLVANAREGU,
- AB8505_EXTSUPPLYREGU,
- AB8505_VAUX12REGU,
- AB8505_VRF1VAUX3REGU,
- AB8505_VSMPSASEL1,
- AB8505_VSMPSASEL2,
- AB8505_VSMPSASEL3,
- AB8505_VSMPSBSEL1,
- AB8505_VSMPSBSEL2,
- AB8505_VSMPSBSEL3,
- AB8505_VSAFESEL1, /* NOTE! PRCMU register */
- AB8505_VSAFESEL2, /* NOTE! PRCMU register */
- AB8505_VSAFESEL3, /* NOTE! PRCMU register */
- AB8505_VAUX1SEL,
- AB8505_VAUX2SEL,
- AB8505_VRF1VAUX3SEL,
- AB8505_VAUX4REQCTRL,
- AB8505_VAUX4REGU,
- AB8505_VAUX4SEL,
- AB8505_REGUCTRLDISCH,
- AB8505_REGUCTRLDISCH2,
- AB8505_REGUCTRLDISCH3,
- AB8505_CTRLVAUX5,
- AB8505_CTRLVAUX6,
- AB8505_NUM_REGULATOR_REGISTERS,
-};
-
-/* AB8500 external regulators */
-struct ab8500_ext_regulator_cfg {
- bool hwreq; /* requires hw mode or high power mode */
-};
-
-enum ab8500_ext_regulator_id {
- AB8500_EXT_SUPPLY1,
- AB8500_EXT_SUPPLY2,
- AB8500_EXT_SUPPLY3,
- AB8500_NUM_EXT_REGULATORS,
-};
-
-/* AB8500 regulator platform data */
-struct ab8500_regulator_platform_data {
- int num_reg_init;
- struct ab8500_regulator_reg_init *reg_init;
- int num_regulator;
- struct regulator_init_data *regulator;
- int num_ext_regulator;
- struct regulator_init_data *ext_regulator;
-};
-
-#endif
diff --git a/include/linux/regulator/mt6315-regulator.h b/include/linux/regulator/mt6315-regulator.h
new file mode 100644
index 000000000000..3b80d3f3910c
--- /dev/null
+++ b/include/linux/regulator/mt6315-regulator.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6315_H
+#define __LINUX_REGULATOR_MT6315_H
+
+#define MT6315_RP 3
+#define MT6315_PP 6
+#define MT6315_SP 7
+
+enum {
+ MT6315_VBUCK1 = 0,
+ MT6315_VBUCK2,
+ MT6315_VBUCK3,
+ MT6315_VBUCK4,
+ MT6315_VBUCK_MAX,
+};
+
+/* Register */
+#define MT6315_TOP2_ELR7 0x139
+#define MT6315_TOP_TMA_KEY 0x39F
+#define MT6315_TOP_TMA_KEY_H 0x3A0
+#define MT6315_BUCK_TOP_CON0 0x1440
+#define MT6315_BUCK_TOP_CON1 0x1443
+#define MT6315_BUCK_TOP_ELR0 0x1449
+#define MT6315_BUCK_TOP_ELR2 0x144B
+#define MT6315_BUCK_TOP_ELR4 0x144D
+#define MT6315_BUCK_TOP_ELR6 0x144F
+#define MT6315_VBUCK1_DBG0 0x1499
+#define MT6315_VBUCK1_DBG4 0x149D
+#define MT6315_VBUCK2_DBG0 0x1519
+#define MT6315_VBUCK2_DBG4 0x151D
+#define MT6315_VBUCK3_DBG0 0x1599
+#define MT6315_VBUCK3_DBG4 0x159D
+#define MT6315_VBUCK4_DBG0 0x1619
+#define MT6315_VBUCK4_DBG4 0x161D
+#define MT6315_BUCK_TOP_4PHASE_ANA_CON42 0x16B1
+
+#define PROTECTION_KEY_H 0x9C
+#define PROTECTION_KEY 0xEA
+
+#endif /* __LINUX_REGULATOR_MT6315_H */
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index 1bbd3014f906..ccdb5320a240 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -216,4 +216,11 @@ enum {
#define IRQ_THERM_105 0x02
#define IRQ_THERM_125 0x01
+/* PCA9450_REG_RESET_CTRL bits */
+#define WDOG_B_CFG_MASK 0xC0
+#define WDOG_B_CFG_NONE 0x00
+#define WDOG_B_CFG_WARM 0x40
+#define WDOG_B_CFG_COLD_LDO12 0x80
+#define WDOG_B_CFG_COLD 0xC0
+
#endif /* __LINUX_REG_PCA9450_H__ */
diff --git a/lib/linear_ranges.c b/lib/linear_ranges.c
index 9495ef3572b7..ced5c15d3f04 100644
--- a/lib/linear_ranges.c
+++ b/lib/linear_ranges.c
@@ -128,7 +128,7 @@ EXPORT_SYMBOL_GPL(linear_range_get_value_array);
* @selector: address where found selector value is updated
* @found: flag to indicate that given value was in the range
*
- * Return selector which which range value is closest match for given
+ * Return selector for which range value is closest match for given
* input value. Value is matching if it is equal or smaller than given
* value. If given value is in the range, then @found is set true.
*
@@ -168,11 +168,11 @@ EXPORT_SYMBOL_GPL(linear_range_get_selector_low);
* @selector: address where found selector value is updated
* @found: flag to indicate that given value was in the range
*
- * Scan array of ranges for selector which which range value matches given
+ * Scan array of ranges for selector for which range value matches given
* input value. Value is matching if it is equal or smaller than given
* value. If given value is found to be in a range scanning is stopped and
* @found is set true. If a range with values smaller than given value is found
- * but the range max is being smaller than given value, then the ranges
+ * but the range max is being smaller than given value, then the range's
* biggest selector is updated to @selector but scanning ranges is continued
* and @found is set to false.
*
@@ -209,7 +209,7 @@ EXPORT_SYMBOL_GPL(linear_range_get_selector_low_array);
* @selector: address where found selector value is updated
* @found: flag to indicate that given value was in the range
*
- * Return selector which which range value is closest match for given
+ * Return selector for which range value is closest match for given
* input value. Value is matching if it is equal or higher than given
* value. If given value is in the range, then @found is set true.
*