diff options
-rw-r--r-- | Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt | 83 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml | 102 |
2 files changed, 102 insertions, 83 deletions
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt deleted file mode 100644 index b6a8cc0978cd..000000000000 --- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt +++ /dev/null @@ -1,83 +0,0 @@ -* BCM2835 DMA controller - -The BCM2835 DMA controller has 16 channels in total. -Only the lower 13 channels have an associated IRQ. -Some arbitrary channels are used by the firmware -(1,3,6,7 in the current firmware version). -The channels 0,2 and 3 have special functionality -and should not be used by the driver. - -Required properties: -- compatible: Should be "brcm,bcm2835-dma". -- reg: Should contain DMA registers location and length. -- interrupts: Should contain the DMA interrupts associated - to the DMA channels in ascending order. -- interrupt-names: Should contain the names of the interrupt - in the form "dmaXX". - Use "dma-shared-all" for the common interrupt line - that is shared by all dma channels. -- #dma-cells: Must be <1>, the cell in the dmas property of the - client device represents the DREQ number. -- brcm,dma-channel-mask: Bit mask representing the channels - not used by the firmware in ascending order, - i.e. first channel corresponds to LSB. - -Example: - -dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xf00>; - interrupts = <1 16>, - <1 17>, - <1 18>, - <1 19>, - <1 20>, - <1 21>, - <1 22>, - <1 23>, - <1 24>, - <1 25>, - <1 26>, - /* dma channel 11-14 share one irq */ - <1 27>, - <1 27>, - <1 27>, - <1 27>, - /* unused shared irq for all channels */ - <1 28>; - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10", - "dma11", - "dma12", - "dma13", - "dma14", - "dma-shared-all"; - - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7f35>; -}; - - -DMA clients connected to the BCM2835 DMA controller must use the format -described in the dma.txt file, using a two-cell specifier for each channel. - -Example: - -bcm2835_i2s: i2s@7e203000 { - compatible = "brcm,bcm2835-i2s"; - reg = < 0x7e203000 0x24>; - clocks = <&clocks BCM2835_CLOCK_PCM>; - - dmas = <&dma 2>, - <&dma 3>; - dma-names = "tx", "rx"; -}; diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml new file mode 100644 index 000000000000..c9b9a5490826 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/brcm,bcm2835-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 DMA controller + +maintainers: + - Nicolas Saenz Julienne <nsaenz@kernel.org> + +description: + The BCM2835 DMA controller has 16 channels in total. Only the lower + 13 channels have an associated IRQ. Some arbitrary channels are used by the + VideoCore firmware (1,3,6,7 in the current firmware version). The channels + 0, 2 and 3 have special functionality and should not be used by the driver. + +allOf: + - $ref: dma-controller.yaml# + +properties: + compatible: + const: brcm,bcm2835-dma + + reg: + maxItems: 1 + + interrupts: + description: + Should contain the DMA interrupts associated to the DMA channels in + ascending order. + minItems: 1 + maxItems: 16 + + interrupt-names: + minItems: 1 + maxItems: 16 + + '#dma-cells': + description: The single cell represents the DREQ number. + const: 1 + + brcm,dma-channel-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Bitmask of available DMA channels in ascending order that are + not reserved by firmware and are available to the + kernel. i.e. first channel corresponds to LSB. + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#dma-cells" + - brcm,dma-channel-mask + +examples: + - | + dma-controller@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16>, + <1 17>, + <1 18>, + <1 19>, + <1 20>, + <1 21>, + <1 22>, + <1 23>, + <1 24>, + <1 25>, + <1 26>, + /* dma channel 11-14 share one irq */ + <1 27>, + <1 27>, + <1 27>, + <1 27>, + /* unused shared irq for all channels */ + <1 28>; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5", + "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11", + "dma12", + "dma13", + "dma14", + "dma-shared-all"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x7f35>; + }; + +... |