summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmi-nand.txt33
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-lib.c7
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c126
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.h4
-rw-r--r--include/linux/mtd/gpmi-nand.h8
5 files changed, 105 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
new file mode 100644
index 000000000000..1a5bbd346d22
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -0,0 +1,33 @@
+* Freescale General-Purpose Media Interface (GPMI)
+
+The GPMI nand controller provides an interface to control the
+NAND flash chips. We support only one NAND chip now.
+
+Required properties:
+ - compatible : should be "fsl,<chip>-gpmi-nand"
+ - reg : should contain registers location and length for gpmi and bch.
+ - reg-names: Should contain the reg names "gpmi-nand" and "bch"
+ - interrupts : The first is the DMA interrupt number for GPMI.
+ The second is the BCH interrupt number.
+ - interrupt-names : The interrupt names "gpmi-dma", "bch";
+ - fsl,gpmi-dma-channel : Should contain the dma channel it uses.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Examples:
+
+gpmi-nand@8000c000 {
+ compatible = "fsl,imx28-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <88>, <41>;
+ interrupt-names = "gpmi-dma", "bch";
+ fsl,gpmi-dma-channel = <4>;
+
+ partition@0 {
+ ...
+ };
+};
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index fa5200b8c895..5c55c717fe14 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -256,11 +256,12 @@ static unsigned int ns_to_cycles(unsigned int time,
return max(k, min);
}
+#define DEF_MIN_PROP_DELAY 5
+#define DEF_MAX_PROP_DELAY 9
/* Apply timing to current hardware conditions. */
static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
struct gpmi_nfc_hardware_timing *hw)
{
- struct gpmi_nand_platform_data *pdata = this->pdata;
struct timing_threshod *nfc = &timing_default_threshold;
struct nand_chip *nand = &this->nand;
struct nand_timing target = this->timing;
@@ -277,8 +278,8 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
int ideal_sample_delay_in_ns;
unsigned int sample_delay_factor;
int tEYE;
- unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
- unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+ unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY;
+ unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY;
/*
* If there are multiple chips, we need to relax the timings to allow
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 7e8a035d444a..d9dc4c874ffa 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -24,6 +24,8 @@
#include <linux/module.h>
#include <linux/mtd/gpmi-nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include "gpmi-nand.h"
/* add our owner bbt descriptor */
@@ -386,7 +388,7 @@ static void release_bch_irq(struct gpmi_nand_data *this)
static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
{
struct gpmi_nand_data *this = param;
- struct resource *r = this->private;
+ int dma_channel = (int)this->private;
if (!mxs_dma_is_apbh(chan))
return false;
@@ -398,7 +400,7 @@ static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
* for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
* (These eight channels share the same IRQ!)
*/
- if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+ if (dma_channel == chan->chan_id) {
chan->private = &this->dma_data;
return true;
}
@@ -418,57 +420,45 @@ static void release_dma_channels(struct gpmi_nand_data *this)
static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
{
struct platform_device *pdev = this->pdev;
- struct gpmi_nand_platform_data *pdata = this->pdata;
- struct resources *res = &this->resources;
- struct resource *r, *r_dma;
- unsigned int i;
+ struct resource *r_dma;
+ struct device_node *dn;
+ int dma_channel;
+ unsigned int ret;
+ struct dma_chan *dma_chan;
+ dma_cap_mask_t mask;
+
+ /* dma channel, we only use the first one. */
+ dn = pdev->dev.of_node;
+ ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel);
+ if (ret) {
+ pr_err("unable to get DMA channel from dt.\n");
+ goto acquire_err;
+ }
+ this->private = (void *)dma_channel;
- r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- GPMI_NAND_DMA_CHANNELS_RES_NAME);
+ /* gpmi dma interrupt */
r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
GPMI_NAND_DMA_INTERRUPT_RES_NAME);
- if (!r || !r_dma) {
+ if (!r_dma) {
pr_err("Can't get resource for DMA\n");
- return -ENXIO;
+ goto acquire_err;
}
+ this->dma_data.chan_irq = r_dma->start;
- /* used in gpmi_dma_filter() */
- this->private = r;
-
- for (i = r->start; i <= r->end; i++) {
- struct dma_chan *dma_chan;
- dma_cap_mask_t mask;
+ /* request dma channel */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
- if (i - r->start >= pdata->max_chip_count)
- break;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- /* get the DMA interrupt */
- if (r_dma->start == r_dma->end) {
- /* only register the first. */
- if (i == r->start)
- this->dma_data.chan_irq = r_dma->start;
- else
- this->dma_data.chan_irq = NO_IRQ;
- } else
- this->dma_data.chan_irq = r_dma->start + (i - r->start);
-
- dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
- if (!dma_chan)
- goto acquire_err;
-
- /* fill the first empty item */
- this->dma_chans[i - r->start] = dma_chan;
+ dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+ if (!dma_chan) {
+ pr_err("dma_request_channel failed.\n");
+ goto acquire_err;
}
- res->dma_low_channel = r->start;
- res->dma_high_channel = i;
+ this->dma_chans[0] = dma_chan;
return 0;
acquire_err:
- pr_err("Can't acquire DMA channel %u\n", i);
release_dma_channels(this);
return -EINVAL;
}
@@ -1465,9 +1455,9 @@ void gpmi_nfc_exit(struct gpmi_nand_data *this)
static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
{
- struct gpmi_nand_platform_data *pdata = this->pdata;
struct mtd_info *mtd = &this->mtd;
struct nand_chip *chip = &this->nand;
+ struct mtd_part_parser_data ppdata = {};
int ret;
/* init current chip */
@@ -1505,14 +1495,14 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
if (ret)
goto err_out;
- ret = nand_scan(mtd, pdata->max_chip_count);
+ ret = nand_scan(mtd, 1);
if (ret) {
pr_err("Chip scan failed\n");
goto err_out;
}
- ret = mtd_device_parse_register(mtd, NULL, NULL,
- pdata->partitions, pdata->partition_count);
+ ppdata.of_node = this->pdev->dev.of_node;
+ ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (ret)
goto err_out;
return 0;
@@ -1522,12 +1512,37 @@ err_out:
return ret;
}
+static const struct platform_device_id gpmi_ids[] = {
+ { .name = "imx23-gpmi-nand", .driver_data = IS_MX23, },
+ { .name = "imx28-gpmi-nand", .driver_data = IS_MX28, },
+ {},
+};
+
+static const struct of_device_id gpmi_nand_id_table[] = {
+ {
+ .compatible = "fsl,imx23-gpmi-nand",
+ .data = (void *)&gpmi_ids[IS_MX23]
+ }, {
+ .compatible = "fsl,imx28-gpmi-nand",
+ .data = (void *)&gpmi_ids[IS_MX28]
+ }, {}
+};
+MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
+
static int __devinit gpmi_nand_probe(struct platform_device *pdev)
{
- struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
struct gpmi_nand_data *this;
+ const struct of_device_id *of_id;
int ret;
+ of_id = of_match_device(gpmi_nand_id_table, &pdev->dev);
+ if (of_id) {
+ pdev->id_entry = of_id->data;
+ } else {
+ pr_err("Failed to find the right device id.\n");
+ return -ENOMEM;
+ }
+
this = kzalloc(sizeof(*this), GFP_KERNEL);
if (!this) {
pr_err("Failed to allocate per-device memory\n");
@@ -1537,13 +1552,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, this);
this->pdev = pdev;
this->dev = &pdev->dev;
- this->pdata = pdata;
-
- if (pdata->platform_init) {
- ret = pdata->platform_init();
- if (ret)
- goto platform_init_error;
- }
ret = acquire_resources(this);
if (ret)
@@ -1561,7 +1569,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
exit_nfc_init:
release_resources(this);
-platform_init_error:
exit_acquire_resources:
platform_set_drvdata(pdev, NULL);
kfree(this);
@@ -1579,19 +1586,10 @@ static int __exit gpmi_nand_remove(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id gpmi_ids[] = {
- {
- .name = "imx23-gpmi-nand",
- .driver_data = IS_MX23,
- }, {
- .name = "imx28-gpmi-nand",
- .driver_data = IS_MX28,
- }, {},
-};
-
static struct platform_driver gpmi_nand_driver = {
.driver = {
.name = "gpmi-nand",
+ .of_match_table = gpmi_nand_id_table,
},
.probe = gpmi_nand_probe,
.remove = __exit_p(gpmi_nand_remove),
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index ec6180d4ff8f..12fdd7767c1c 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -266,8 +266,8 @@ extern int gpmi_read_page(struct gpmi_nand_data *,
#define STATUS_UNCORRECTABLE 0xfe
/* Use the platform_id to distinguish different Archs. */
-#define IS_MX23 0x1
-#define IS_MX28 0x2
+#define IS_MX23 0x0
+#define IS_MX28 0x1
#define GPMI_IS_MX23(x) ((x)->pdev->id_entry->driver_data == IS_MX23)
#define GPMI_IS_MX28(x) ((x)->pdev->id_entry->driver_data == IS_MX28)
#endif
diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h
index 69b6dbf46b5e..ed3c4e09f3d1 100644
--- a/include/linux/mtd/gpmi-nand.h
+++ b/include/linux/mtd/gpmi-nand.h
@@ -23,12 +23,12 @@
#define GPMI_NAND_RES_SIZE 6
/* Resource names for the GPMI NAND driver. */
-#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "GPMI NAND GPMI Registers"
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand"
#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME "GPMI NAND GPMI Interrupt"
-#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "GPMI NAND BCH Registers"
-#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "GPMI NAND BCH Interrupt"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch"
#define GPMI_NAND_DMA_CHANNELS_RES_NAME "GPMI NAND DMA Channels"
-#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "GPMI NAND DMA Interrupt"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "gpmi-dma"
/**
* struct gpmi_nand_platform_data - GPMI NAND driver platform data.