diff options
| -rw-r--r-- | arch/arm64/boot/dts/qcom/pmr735d_a.dtsi (renamed from arch/arm64/boot/dts/qcom/pmr735d.dtsi) | 45 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/pmr735d_b.dtsi | 59 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 3 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 3 |
4 files changed, 63 insertions, 47 deletions
diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi index 41fb664a10b3..37daaefe3431 100644 --- a/arch/arm64/boot/dts/qcom/pmr735d.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi @@ -28,27 +28,6 @@ }; }; }; - - pmr735d-l-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - - thermal-sensors = <&pmr735d_l_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; }; }; @@ -77,28 +56,4 @@ #interrupt-cells = <2>; }; }; - - pmr735d_l: pmic@b { - compatible = "qcom,pmr735d", "qcom,spmi-pmic"; - reg = <0xb SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmr735d_l_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pmr735d_l_gpios: gpio@8800 { - compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmr735d_l_gpios 0 0 2>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; }; diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi new file mode 100644 index 000000000000..3b470f6ac46f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmr735d-l-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pmr735d_l_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pmr735d_l: pmic@b { + compatible = "qcom,pmr735d", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735d_l_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmr735d_l_gpios: gpio@8800 { + compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735d_l_gpios 0 0 2>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 91aa37ecb259..5b3488736fbe 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -13,7 +13,8 @@ #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" -#include "pmr735d.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 MTP"; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 2a0ea20224d6..320662024e89 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -14,7 +14,8 @@ #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" -#include "pmr735d.dtsi" +#include "pmr735d_a.dtsi" +#include "pmr735d_b.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 QRD"; |