diff options
-rw-r--r-- | Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 215 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml | 358 | ||||
-rw-r--r-- | MAINTAINERS | 2 |
3 files changed, 359 insertions, 216 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt deleted file mode 100644 index b61c2d5a0ff7..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ /dev/null @@ -1,215 +0,0 @@ -* Qualcomm Atheros ath10k wireless devices - -Required properties: -- compatible: Should be one of the following: - * "qcom,ath10k" - * "qcom,ipq4019-wifi" - * "qcom,wcn3990-wifi" - -PCI based devices uses compatible string "qcom,ath10k" and takes calibration -data along with board specific data via "qcom,ath10k-calibration-data". -Rest of the properties are not applicable for PCI based devices. - -AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi" -and also uses most of the properties defined in this doc (except -"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data" -to carry pre calibration data. - -In general, entry "qcom,ath10k-pre-calibration-data" and -"qcom,ath10k-calibration-data" conflict with each other and only one -can be provided per device. - -SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi". - -- reg: Address and length of the register set for the device. -- reg-names: Must include the list of following reg names, - "membase" -- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi" - compatible target. - reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi" - compatible target. - Must contain interrupt-names property per entry for - "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets. - -- interrupt-names: Must include the entries for MSI interrupt - names ("msi0" to "msi15") and legacy interrupt - name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi" - compatible targets. - -Optional properties: -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reseti.txt for details. -- reset-names: Must include the list of following reset names, - "wifi_cpu_init" - "wifi_radio_srif" - "wifi_radio_warm" - "wifi_radio_cold" - "wifi_core_warm" - "wifi_core_cold" -- clocks: List of clock specifiers, must contain an entry for each required - entry in clock-names. -- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", - "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and - "cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi" - compatible target. -- qcom,msi_addr: MSI interrupt address. -- qcom,msi_base: Base value to add before writing MSI data into - MSI address register. -- qcom,ath10k-calibration-variant: string to search for in the board-2.bin - variant list with the same bus and device - specific ids -- qcom,ath10k-calibration-data : calibration data + board specific data - as an array, the length can vary between - hw versions. -- qcom,ath10k-pre-calibration-data : pre calibration data as an array, - the length can vary between hw versions. -- <supply-name>-supply: handle to the regulator device tree node - optional "supply-name" are "vdd-0.8-cx-mx", - "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0", - and "vdd-3.3-ch1". -- memory-region: - Usage: optional - Value type: <phandle> - Definition: reference to the reserved-memory for the msa region - used by the wifi firmware running in Q6. -- iommus: - Usage: optional - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. -- ext-fem-name: - Usage: Optional - Value type: string - Definition: Name of external front end module used. Some valid FEM names - for example: "microsemi-lx5586", "sky85703-11" - and "sky85803" etc. -- qcom,snoc-host-cap-8bit-quirk: - Usage: Optional - Value type: <empty> - Definition: Quirk specifying that the firmware expects the 8bit version - of the host capability QMI request -- qcom,xo-cal-data: xo cal offset to be configured in xo trim register. - -- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically - mapped msa region. - -- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex - support by the hardware. -- qcom,coexist-gpio-pin : gpio pin number information to support coex - which will be used by wifi firmware. - -* Subnodes -The ath10k wifi node can contain one optional firmware subnode. -Firmware subnode is needed when the platform does not have TustZone. -The firmware subnode must have: - -- iommus: - Usage: required - Value type: <prop-encoded-array> - Definition: A list of phandle and IOMMU specifier pairs. - - -Example (to supply PCI based wifi block details): - -In this example, the node is defined as child node of the PCI controller. - -pci { - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - - wifi@0,0 { - reg = <0 0 0 0 0>; - qcom,ath10k-calibration-data = [ 01 02 03 ... ]; - ext-fem-name = "microsemi-lx5586"; - }; - }; -}; - -Example (to supply ipq4019 SoC wifi block details): - -wifi0: wifi@a000000 { - compatible = "qcom,ipq4019-wifi"; - reg = <0xa000000 0x200000>; - resets = <&gcc WIFI0_CPU_INIT_RESET>, - <&gcc WIFI0_RADIO_SRIF_RESET>, - <&gcc WIFI0_RADIO_WARM_RESET>, - <&gcc WIFI0_RADIO_COLD_RESET>, - <&gcc WIFI0_CORE_WARM_RESET>, - <&gcc WIFI0_CORE_COLD_RESET>; - reset-names = "wifi_cpu_init", - "wifi_radio_srif", - "wifi_radio_warm", - "wifi_radio_cold", - "wifi_core_warm", - "wifi_core_cold"; - clocks = <&gcc GCC_WCSS2G_CLK>, - <&gcc GCC_WCSS2G_REF_CLK>, - <&gcc GCC_WCSS2G_RTC_CLK>; - clock-names = "wifi_wcss_cmd", - "wifi_wcss_ref", - "wifi_wcss_rtc"; - interrupts = <0 0x20 0x1>, - <0 0x21 0x1>, - <0 0x22 0x1>, - <0 0x23 0x1>, - <0 0x24 0x1>, - <0 0x25 0x1>, - <0 0x26 0x1>, - <0 0x27 0x1>, - <0 0x28 0x1>, - <0 0x29 0x1>, - <0 0x2a 0x1>, - <0 0x2b 0x1>, - <0 0x2c 0x1>, - <0 0x2d 0x1>, - <0 0x2e 0x1>, - <0 0x2f 0x1>, - <0 0xa8 0x0>; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7", - "msi8", "msi9", "msi10", "msi11", - "msi12", "msi13", "msi14", "msi15", - "legacy"; - qcom,msi_addr = <0x0b006040>; - qcom,msi_base = <0x40>; - qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ]; - qcom,coexist-support = <1>; - qcom,coexist-gpio-pin = <0x33>; -}; - -Example (to supply wcn3990 SoC wifi block details): - -wifi@18000000 { - compatible = "qcom,wcn3990-wifi"; - reg = <0x18800000 0x800000>; - reg-names = "membase"; - clocks = <&clock_gcc clk_rf_clk2_pin>; - clock-names = "cxo_ref_clk_pin"; - interrupts = - <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; - vdd-0.8-cx-mx-supply = <&pm8998_l5>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - vdd-3.3-ch1-supply = <&vreg_l26a_3p3>; - memory-region = <&wifi_msa_mem>; - iommus = <&apps_smmu 0x0040 0x1>; - qcom,msa-fixed-perm; - wifi-firmware { - iommus = <&apps_iommu 0xc22 0x1>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml new file mode 100644 index 000000000000..c85ed330426d --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -0,0 +1,358 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath10k wireless devices + +maintainers: + - Kalle Valo <kvalo@kernel.org> + +description: + Qualcomm Technologies, Inc. IEEE 802.11ac devices. + +properties: + compatible: + enum: + - qcom,ath10k # SDIO-based devices + - qcom,ipq4019-wifi + - qcom,wcn3990-wifi # SNoC-based devices + + reg: + maxItems: 1 + + reg-names: + items: + - const: membase + + interrupts: + minItems: 12 + maxItems: 17 + + interrupt-names: + minItems: 12 + maxItems: 17 + + memory-region: + maxItems: 1 + description: + Reference to the MSA memory region used by the Wi-Fi firmware + running on the Q6 core. + + iommus: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + resets: + maxItems: 6 + + reset-names: + items: + - const: wifi_cpu_init + - const: wifi_radio_srif + - const: wifi_radio_warm + - const: wifi_radio_cold + - const: wifi_core_warm + - const: wifi_core_cold + + ext-fem-name: + $ref: /schemas/types.yaml#/definitions/string + description: Name of external front end module used. + enum: + - microsemi-lx5586 + - sky85703-11 + - sky85803 + + wifi-firmware: + type: object + additionalProperties: false + description: | + The ath10k Wi-Fi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Trustzone. + properties: + iommus: + maxItems: 1 + required: + - iommus + + qcom,ath10k-calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Calibration data + board-specific data as a byte array. The length + can vary between hardware versions. + + qcom,ath10k-calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + Unique variant identifier of the calibration data in board-2.bin + for designs with colliding bus and device specific ids + + qcom,ath10k-pre-calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Pre-calibration data as a byte array. The length can vary between + hardware versions. + + qcom,coexist-support: + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1] + description: + Indicate coex support by the hardware. + + qcom,coexist-gpio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + COEX GPIO number provided to the Wi-Fi firmware. + + qcom,msa-fixed-perm: + type: boolean + description: + Whether to skip executing an SCM call that reassigns the memory + region ownership. + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: State bits used by the AP to signal the WLAN Q6. + items: + - description: Signal bits used to enable/disable low power mode + on WCN in the case of WoW (Wake on Wireless). + + qcom,smem-state-names: + description: The names of the state bits used for SMP2P output. + items: + - const: wlan-smp2p-out + + qcom,snoc-host-cap-8bit-quirk: + type: boolean + description: + Quirk specifying that the firmware expects the 8bit version + of the host capability QMI request + + qcom,xo-cal-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + XO cal offset to be configured in XO trim register. + + vdd-0.8-cx-mx-supply: + description: Main logic power rail + + vdd-1.8-xo-supply: + description: Crystal oscillator supply + + vdd-1.3-rfa-supply: + description: RFA supply + + vdd-3.3-ch0-supply: + description: Primary Wi-Fi antenna supply + + vdd-3.3-ch1-supply: + description: Secondary Wi-Fi antenna supply + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq4019-wifi + then: + properties: + interrupts: + minItems: 17 + maxItems: 17 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + - const: msi8 + - const: msi9 + - const: msi10 + - const: msi11 + - const: msi12 + - const: msi13 + - const: msi14 + - const: msi15 + - const: legacy + + clocks: + items: + - description: Wi-Fi command clock + - description: Wi-Fi reference clock + - description: Wi-Fi RTC clock + + clock-names: + items: + - const: wifi_wcss_cmd + - const: wifi_wcss_ref + - const: wifi_wcss_rtc + + required: + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn3990-wifi + + then: + properties: + clocks: + minItems: 1 + items: + - description: XO reference clock + - description: Qualcomm Debug Subsystem clock + + clock-names: + minItems: 1 + items: + - const: cxo_ref_clk_pin + - const: qdss + + interrupts: + items: + - description: CE0 + - description: CE1 + - description: CE2 + - description: CE3 + - description: CE4 + - description: CE5 + - description: CE6 + - description: CE7 + - description: CE8 + - description: CE9 + - description: CE10 + - description: CE11 + + interrupt-names: false + + required: + - interrupts + +examples: + # SNoC + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x18800000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + clock-names = "cxo_ref_clk_pin"; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&anoc2_smmu 0x1900>, + <&anoc2_smmu 0x1901>; + qcom,snoc-host-cap-8bit-quirk; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; + }; + + # AHB + - | + #include <dt-bindings/clock/qcom,gcc-ipq4019.h> + + wifi@a000000 { + compatible = "qcom,ipq4019-wifi"; + reg = <0xa000000 0x200000>; + resets = <&gcc WIFI0_CPU_INIT_RESET>, + <&gcc WIFI0_RADIO_SRIF_RESET>, + <&gcc WIFI0_RADIO_WARM_RESET>, + <&gcc WIFI0_RADIO_COLD_RESET>, + <&gcc WIFI0_CORE_WARM_RESET>, + <&gcc WIFI0_CORE_COLD_RESET>; + reset-names = "wifi_cpu_init", + "wifi_radio_srif", + "wifi_radio_warm", + "wifi_radio_cold", + "wifi_core_warm", + "wifi_core_cold"; + clocks = <&gcc GCC_WCSS2G_CLK>, + <&gcc GCC_WCSS2G_REF_CLK>, + <&gcc GCC_WCSS2G_RTC_CLK>; + clock-names = "wifi_wcss_cmd", + "wifi_wcss_ref", + "wifi_wcss_rtc"; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8", + "msi9", + "msi10", + "msi11", + "msi12", + "msi13", + "msi14", + "msi15", + "legacy"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 8d5bc223f305..c659e12e0c4f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17196,7 +17196,7 @@ S: Supported W: https://wireless.wiki.kernel.org/en/users/Drivers/ath10k T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git F: drivers/net/wireless/ath/ath10k/ -F: Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +F: Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml QUALCOMM ATHEROS ATH11K WIRELESS DRIVER M: Kalle Valo <kvalo@kernel.org> |