summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/spi/spi-atmel.c4
-rw-r--r--drivers/spi/spi-bfin5xx.c19
-rw-r--r--drivers/spi/spi-dw.c4
-rw-r--r--drivers/spi/spi-fsl-espi.c4
-rw-r--r--drivers/spi/spi-mpc52xx-psc.c4
-rw-r--r--drivers/spi/spi-pxa2xx.c36
-rw-r--r--drivers/spi/spi-topcliff-pch.c13
7 files changed, 41 insertions, 43 deletions
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index d4ac60b4a56e..fb61f59661d1 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1401,8 +1401,8 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
asd = spi->controller_state;
bits = (asd->csr >> 4) & 0xf;
if (bits != xfer->bits_per_word - 8) {
- dev_dbg(&spi->dev, "you can't yet change "
- "bits_per_word in transfers\n");
+ dev_dbg(&spi->dev,
+ "you can't yet change bits_per_word in transfers\n");
return -ENOPROTOOPT;
}
}
diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
index 18b892e7455a..b70a2bd9324d 100644
--- a/drivers/spi/spi-bfin5xx.c
+++ b/drivers/spi/spi-bfin5xx.c
@@ -913,8 +913,9 @@ static void bfin_spi_pump_messages(struct work_struct *work)
drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
struct spi_transfer, transfer_list);
- dev_dbg(&drv_data->pdev->dev, "got a message to pump, "
- "state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
+ dev_dbg(&drv_data->pdev->dev,
+ "got a message to pump, state is set to: baud "
+ "%d, flag 0x%x, ctl 0x%x\n",
drv_data->cur_chip->baud, drv_data->cur_chip->flag,
drv_data->cur_chip->ctl_reg);
@@ -1013,8 +1014,8 @@ static int bfin_spi_setup(struct spi_device *spi)
* but let's assume (for now) they do.
*/
if (chip_info->ctl_reg & ~bfin_ctl_reg) {
- dev_err(&spi->dev, "do not set bits in ctl_reg "
- "that the SPI framework manages\n");
+ dev_err(&spi->dev,
+ "do not set bits in ctl_reg that the SPI framework manages\n");
goto error;
}
chip->enable_dma = chip_info->enable_dma != 0
@@ -1050,17 +1051,17 @@ static int bfin_spi_setup(struct spi_device *spi)
chip->chip_select_num = spi->chip_select;
if (chip->chip_select_num < MAX_CTRL_CS) {
if (!(spi->mode & SPI_CPHA))
- dev_warn(&spi->dev, "Warning: SPI CPHA not set:"
- " Slave Select not under software control!\n"
- " See Documentation/blackfin/bfin-spi-notes.txt\n");
+ dev_warn(&spi->dev,
+ "Warning: SPI CPHA not set: Slave Select not under software control!\n"
+ "See Documentation/blackfin/bfin-spi-notes.txt\n");
chip->flag = (1 << spi->chip_select) << 8;
} else
chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS;
if (chip->enable_dma && chip->pio_interrupt) {
- dev_err(&spi->dev, "enable_dma is set, "
- "do not set pio_interrupt\n");
+ dev_err(&spi->dev,
+ "enable_dma is set, do not set pio_interrupt\n");
goto error;
}
/*
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 79c958e49f61..b897c4adb39d 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -870,8 +870,8 @@ void dw_spi_remove_host(struct dw_spi *dws)
/* Remove the queue */
status = destroy_queue(dws);
if (status != 0)
- dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not "
- "complete, message memory not freed\n");
+ dev_err(&dws->master->dev,
+ "dw_spi_remove: workqueue will not complete, message memory not freed\n");
if (dws->dma_ops && dws->dma_ops->dma_exit)
dws->dma_ops->dma_exit(dws);
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index b8f1103fe28e..43222d7532d1 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -289,8 +289,8 @@ static void fsl_espi_do_trans(struct spi_message *m,
if ((first->bits_per_word != t->bits_per_word) ||
(first->speed_hz != t->speed_hz)) {
espi_trans->status = -EINVAL;
- dev_err(mspi->dev, "bits_per_word/speed_hz should be"
- " same for the same SPI transfer\n");
+ dev_err(mspi->dev,
+ "bits_per_word/speed_hz should be same for the same SPI transfer\n");
return;
}
diff --git a/drivers/spi/spi-mpc52xx-psc.c b/drivers/spi/spi-mpc52xx-psc.c
index 6e925dc34396..00ba910ab302 100644
--- a/drivers/spi/spi-mpc52xx-psc.c
+++ b/drivers/spi/spi-mpc52xx-psc.c
@@ -383,8 +383,8 @@ static int mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
mps->irq = irq;
if (pdata == NULL) {
- dev_warn(dev, "probe called without platform data, no "
- "cs_control function will be called\n");
+ dev_warn(dev,
+ "probe called without platform data, no cs_control function will be called\n");
mps->cs_control = NULL;
mps->sysclk = 0;
master->bus_num = bus_num;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index c1a50674c1e3..64e1682c39b1 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -573,8 +573,8 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
write_SSTO(0, reg);
write_SSSR_CS(drv_data, drv_data->clear_sr);
- dev_err(&drv_data->pdev->dev, "bad message state "
- "in interrupt handler\n");
+ dev_err(&drv_data->pdev->dev,
+ "bad message state in interrupt handler\n");
/* Never fail */
return IRQ_HANDLED;
@@ -651,8 +651,8 @@ static void pump_transfers(unsigned long data)
if (message->is_dma_mapped
|| transfer->rx_dma || transfer->tx_dma) {
dev_err(&drv_data->pdev->dev,
- "pump_transfers: mapped transfer length "
- "of %u is greater than %d\n",
+ "pump_transfers: mapped transfer length of "
+ "%u is greater than %d\n",
transfer->len, MAX_DMA_LEN);
message->status = -EINVAL;
giveback(drv_data);
@@ -660,11 +660,10 @@ static void pump_transfers(unsigned long data)
}
/* warn ... we force this to PIO mode */
- if (printk_ratelimit())
- dev_warn(&message->spi->dev, "pump_transfers: "
- "DMA disabled for transfer length %ld "
- "greater than %d\n",
- (long)drv_data->len, MAX_DMA_LEN);
+ dev_warn_ratelimited(&message->spi->dev,
+ "pump_transfers: DMA disabled for transfer length %ld "
+ "greater than %d\n",
+ (long)drv_data->len, MAX_DMA_LEN);
}
/* Setup the transfer state based on the type of transfer */
@@ -726,11 +725,8 @@ static void pump_transfers(unsigned long data)
message->spi,
bits, &dma_burst,
&dma_thresh))
- if (printk_ratelimit())
- dev_warn(&message->spi->dev,
- "pump_transfers: "
- "DMA burst size reduced to "
- "match bits_per_word\n");
+ dev_warn_ratelimited(&message->spi->dev,
+ "pump_transfers: DMA burst size reduced to match bits_per_word\n");
}
cr0 = clk_div
@@ -854,8 +850,8 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip,
if (gpio_is_valid(chip_info->gpio_cs)) {
err = gpio_request(chip_info->gpio_cs, "SPI_CS");
if (err) {
- dev_err(&spi->dev, "failed to request chip select "
- "GPIO%d\n", chip_info->gpio_cs);
+ dev_err(&spi->dev, "failed to request chip select GPIO%d\n",
+ chip_info->gpio_cs);
return err;
}
@@ -899,8 +895,8 @@ static int setup(struct spi_device *spi)
if (drv_data->ssp_type == CE4100_SSP) {
if (spi->chip_select > 4) {
- dev_err(&spi->dev, "failed setup: "
- "cs number must not be > 4.\n");
+ dev_err(&spi->dev,
+ "failed setup: cs number must not be > 4.\n");
kfree(chip);
return -EINVAL;
}
@@ -956,8 +952,8 @@ static int setup(struct spi_device *spi)
spi->bits_per_word,
&chip->dma_burst_size,
&chip->dma_threshold)) {
- dev_warn(&spi->dev, "in setup: DMA burst size reduced "
- "to match bits_per_word\n");
+ dev_warn(&spi->dev,
+ "in setup: DMA burst size reduced to match bits_per_word\n");
}
}
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index eaeeed51bbbf..14843efaaf3a 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -506,8 +506,8 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
goto err_out;
}
- dev_dbg(&pspi->dev, "%s Transfer List not empty. "
- "Transfer Speed is set.\n", __func__);
+ dev_dbg(&pspi->dev,
+ "%s Transfer List not empty. Transfer Speed is set.\n", __func__);
spin_lock_irqsave(&data->lock, flags);
/* validate Tx/Rx buffers and Transfer length */
@@ -526,8 +526,9 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
goto err_return_spinlock;
}
- dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length"
- " valid\n", __func__);
+ dev_dbg(&pspi->dev,
+ "%s Tx/Rx buffer valid. Transfer length valid\n",
+ __func__);
/* if baud rate has been specified validate the same */
if (transfer->speed_hz > PCH_MAX_BAUDRATE)
@@ -1181,8 +1182,8 @@ static void pch_spi_process_messages(struct work_struct *pwork)
spin_lock(&data->lock);
/* check if suspend has been initiated;if yes flush queue */
if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) {
- dev_dbg(&data->master->dev, "%s suspend/remove initiated,"
- "flushing queue\n", __func__);
+ dev_dbg(&data->master->dev,
+ "%s suspend/remove initiated, flushing queue\n", __func__);
list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
pmsg->status = -EIO;