diff options
Diffstat (limited to 'Documentation/ABI')
-rw-r--r-- | Documentation/ABI/stable/sysfs-class-tpm | 185 | ||||
-rw-r--r-- | Documentation/ABI/testing/ima_policy | 10 | ||||
-rw-r--r-- | Documentation/ABI/testing/pstore | 10 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-bus-event_source-devices-events | 62 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-mpu6050 | 13 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-devices-power_resources_D0 | 13 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-devices-power_resources_D1 | 14 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-devices-power_resources_D2 | 14 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-devices-power_resources_D3hot | 14 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-devices-power_state | 20 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-devices-real_power_state | 23 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-devices-resource_in_use | 12 | ||||
-rw-r--r-- | Documentation/ABI/testing/sysfs-platform-ts5500 | 47 |
13 files changed, 429 insertions, 8 deletions
diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm new file mode 100644 index 000000000000..a60b45e2493b --- /dev/null +++ b/Documentation/ABI/stable/sysfs-class-tpm @@ -0,0 +1,185 @@ +What: /sys/class/misc/tpmX/device/ +Date: April 2005 +KernelVersion: 2.6.12 +Contact: tpmdd-devel@lists.sf.net +Description: The device/ directory under a specific TPM instance exposes + the properties of that TPM chip + + +What: /sys/class/misc/tpmX/device/active +Date: April 2006 +KernelVersion: 2.6.17 +Contact: tpmdd-devel@lists.sf.net +Description: The "active" property prints a '1' if the TPM chip is accepting + commands. An inactive TPM chip still contains all the state of + an active chip (Storage Root Key, NVRAM, etc), and can be + visible to the OS, but will only accept a restricted set of + commands. See the TPM Main Specification part 2, Structures, + section 17 for more information on which commands are + available. + +What: /sys/class/misc/tpmX/device/cancel +Date: June 2005 +KernelVersion: 2.6.13 +Contact: tpmdd-devel@lists.sf.net +Description: The "cancel" property allows you to cancel the currently + pending TPM command. Writing any value to cancel will call the + TPM vendor specific cancel operation. + +What: /sys/class/misc/tpmX/device/caps +Date: April 2005 +KernelVersion: 2.6.12 +Contact: tpmdd-devel@lists.sf.net +Description: The "caps" property contains TPM manufacturer and version info. + + Example output: + + Manufacturer: 0x53544d20 + TCG version: 1.2 + Firmware version: 8.16 + + Manufacturer is a hex dump of the 4 byte manufacturer info + space in a TPM. TCG version shows the TCG TPM spec level that + the chip supports. Firmware version is that of the chip and + is manufacturer specific. + +What: /sys/class/misc/tpmX/device/durations +Date: March 2011 +KernelVersion: 3.1 +Contact: tpmdd-devel@lists.sf.net +Description: The "durations" property shows the 3 vendor-specific values + used to wait for a short, medium and long TPM command. All + TPM commands are categorized as short, medium or long in + execution time, so that the driver doesn't have to wait + any longer than necessary before starting to poll for a + result. + + Example output: + + 3015000 4508000 180995000 [original] + + Here the short, medium and long durations are displayed in + usecs. "[original]" indicates that the values are displayed + unmodified from when they were queried from the chip. + Durations can be modified in the case where a buggy chip + reports them in msec instead of usec and they need to be + scaled to be displayed in usecs. In this case "[adjusted]" + will be displayed in place of "[original]". + +What: /sys/class/misc/tpmX/device/enabled +Date: April 2006 +KernelVersion: 2.6.17 +Contact: tpmdd-devel@lists.sf.net +Description: The "enabled" property prints a '1' if the TPM chip is enabled, + meaning that it should be visible to the OS. This property + may be visible but produce a '0' after some operation that + disables the TPM. + +What: /sys/class/misc/tpmX/device/owned +Date: April 2006 +KernelVersion: 2.6.17 +Contact: tpmdd-devel@lists.sf.net +Description: The "owned" property produces a '1' if the TPM_TakeOwnership + ordinal has been executed successfully in the chip. A '0' + indicates that ownership hasn't been taken. + +What: /sys/class/misc/tpmX/device/pcrs +Date: April 2005 +KernelVersion: 2.6.12 +Contact: tpmdd-devel@lists.sf.net +Description: The "pcrs" property will dump the current value of all Platform + Configuration Registers in the TPM. Note that since these + values may be constantly changing, the output is only valid + for a snapshot in time. + + Example output: + + PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75 + ... + + The number of PCRs and hex bytes needed to represent a PCR + value will vary depending on TPM chip version. For TPM 1.1 and + 1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes + long. Use the "caps" property to determine TPM version. + +What: /sys/class/misc/tpmX/device/pubek +Date: April 2005 +KernelVersion: 2.6.12 +Contact: tpmdd-devel@lists.sf.net +Description: The "pubek" property will return the TPM's public endorsement + key if possible. If the TPM has had ownership established and + is version 1.2, the pubek will not be available without the + owner's authorization. Since the TPM driver doesn't store any + secrets, it can't authorize its own request for the pubek, + making it unaccessible. The public endorsement key is gener- + ated at TPM menufacture time and exists for the life of the + chip. + + Example output: + + Algorithm: 00 00 00 01 + Encscheme: 00 03 + Sigscheme: 00 01 + Parameters: 00 00 08 00 00 00 00 02 00 00 00 00 + Modulus length: 256 + Modulus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ossible values: + + Algorithm: TPM_ALG_RSA (1) + Encscheme: TPM_ES_RSAESPKCSv15 (2) + TPM_ES_RSAESOAEP_SHA1_MGF1 (3) + Sigscheme: TPM_SS_NONE (1) + Parameters, a byte string of 3 u32 values: + Key Length (bits): 00 00 08 00 (2048) + Num primes: 00 00 00 02 (2) + Exponent Size: 00 00 00 00 (0 means the + default exp) + Modulus Length: 256 (bytes) + Modulus: The 256 byte Endorsement Key modulus + +What: /sys/class/misc/tpmX/device/temp_deactivated +Date: April 2006 +KernelVersion: 2.6.17 +Contact: tpmdd-devel@lists.sf.net +Description: The "temp_deactivated" property returns a '1' if the chip has + been temporarily dectivated, usually until the next power + cycle. Whether a warm boot (reboot) will clear a TPM chip + from a temp_deactivated state is platform specific. + +What: /sys/class/misc/tpmX/device/timeouts +Date: March 2011 +KernelVersion: 3.1 +Contact: tpmdd-devel@lists.sf.net +Description: The "timeouts" property shows the 4 vendor-specific values + for the TPM's interface spec timeouts. The use of these + timeouts is defined by the TPM interface spec that the chip + conforms to. + + Example output: + + 750000 750000 750000 750000 [original] + + The four timeout values are shown in usecs, with a trailing + "[original]" or "[adjusted]" depending on whether the values + were scaled by the driver to be reported in usec from msecs. diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index ec0a38ef3145..f1c5cc9d17a8 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -18,17 +18,21 @@ Description: rule format: action [condition ...] action: measure | dont_measure | appraise | dont_appraise | audit - condition:= base | lsm - base: [[func=] [mask=] [fsmagic=] [uid=] [fowner]] + condition:= base | lsm [option] + base: [[func=] [mask=] [fsmagic=] [fsuuid=] [uid=] + [fowner]] lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] + option: [[appraise_type=]] - base: func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK][MODULE_CHECK] + base: func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK] mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] fsmagic:= hex value + fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6) uid:= decimal value fowner:=decimal value lsm: are LSM specific + option: appraise_type:= [imasig] default policy: # PROC_SUPER_MAGIC diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore index ff1df4e3b059..5fca9f5e10a3 100644 --- a/Documentation/ABI/testing/pstore +++ b/Documentation/ABI/testing/pstore @@ -1,4 +1,4 @@ -Where: /dev/pstore/... +Where: /sys/fs/pstore/... (or /dev/pstore/...) Date: March 2011 Kernel Version: 2.6.39 Contact: tony.luck@intel.com @@ -11,9 +11,9 @@ Description: Generic interface to platform dependent persistent storage. of the console log is captured, but other interesting data can also be saved. - # mount -t pstore -o kmsg_bytes=8000 - /dev/pstore + # mount -t pstore -o kmsg_bytes=8000 - /sys/fs/pstore - $ ls -l /dev/pstore + $ ls -l /sys/fs/pstore/ total 0 -r--r--r-- 1 root root 7896 Nov 30 15:38 dmesg-erst-1 @@ -27,9 +27,9 @@ Description: Generic interface to platform dependent persistent storage. the file will signal to the underlying persistent storage device that it can reclaim the space for later re-use. - $ rm /dev/pstore/dmesg-erst-1 + $ rm /sys/fs/pstore/dmesg-erst-1 - The expectation is that all files in /dev/pstore + The expectation is that all files in /sys/fs/pstore/ will be saved elsewhere and erased from persistent store soon after boot to free up space ready for the next catastrophe. diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events new file mode 100644 index 000000000000..0adeb524c0d4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-events @@ -0,0 +1,62 @@ +What: /sys/devices/cpu/events/ + /sys/devices/cpu/events/branch-misses + /sys/devices/cpu/events/cache-references + /sys/devices/cpu/events/cache-misses + /sys/devices/cpu/events/stalled-cycles-frontend + /sys/devices/cpu/events/branch-instructions + /sys/devices/cpu/events/stalled-cycles-backend + /sys/devices/cpu/events/instructions + /sys/devices/cpu/events/cpu-cycles + +Date: 2013/01/08 + +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> + +Description: Generic performance monitoring events + + A collection of performance monitoring events that may be + supported by many/most CPUs. These events can be monitored + using the 'perf(1)' tool. + + The contents of each file would look like: + + event=0xNNNN + + where 'N' is a hex digit and the number '0xNNNN' shows the + "raw code" for the perf event identified by the file's + "basename". + + +What: /sys/devices/cpu/events/PM_LD_MISS_L1 + /sys/devices/cpu/events/PM_LD_REF_L1 + /sys/devices/cpu/events/PM_CYC + /sys/devices/cpu/events/PM_BRU_FIN + /sys/devices/cpu/events/PM_GCT_NOSLOT_CYC + /sys/devices/cpu/events/PM_BRU_MPRED + /sys/devices/cpu/events/PM_INST_CMPL + /sys/devices/cpu/events/PM_CMPLU_STALL + +Date: 2013/01/08 + +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> + Linux Powerpc mailing list <linuxppc-dev@ozlabs.org> + +Description: POWER-systems specific performance monitoring events + + A collection of performance monitoring events that may be + supported by the POWER CPU. These events can be monitored + using the 'perf(1)' tool. + + These events may not be supported by other CPUs. + + The contents of each file would look like: + + event=0xNNNN + + where 'N' is a hex digit and the number '0xNNNN' shows the + "raw code" for the perf event identified by the file's + "basename". + + Further, multiple terms like 'event=0xNNNN' can be specified + and separated with comma. All available terms are defined in + the /sys/bus/event_source/devices/<dev>/format file. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 new file mode 100644 index 000000000000..cb53737aacbf --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 @@ -0,0 +1,13 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_gyro_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_accel_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_magn_matrix +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + This is mounting matrix for motion sensors. Mounting matrix + is a 3x3 unitary matrix. A typical mounting matrix would look like + [0, 1, 0; 1, 0, 0; 0, 0, -1]. Using this information, it would be + easy to tell the relative positions among sensors as well as their + positions relative to the board that holds these sensors. Identity matrix + [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and device are perfectly + aligned with each other. All axes are exactly the same. diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D0 b/Documentation/ABI/testing/sysfs-devices-power_resources_D0 new file mode 100644 index 000000000000..73b77a6be196 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D0 @@ -0,0 +1,13 @@ +What: /sys/devices/.../power_resources_D0/ +Date: January 2013 +Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +Description: + The /sys/devices/.../power_resources_D0/ directory is only + present for device objects representing ACPI device nodes that + use ACPI power resources for power management. + + If present, it contains symbolic links to device directories + representing ACPI power resources that need to be turned on for + the given device node to be in ACPI power state D0. The names + of the links are the same as the names of the directories they + point to. diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D1 b/Documentation/ABI/testing/sysfs-devices-power_resources_D1 new file mode 100644 index 000000000000..30c20703fb8c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D1 @@ -0,0 +1,14 @@ +What: /sys/devices/.../power_resources_D1/ +Date: January 2013 +Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +Description: + The /sys/devices/.../power_resources_D1/ directory is only + present for device objects representing ACPI device nodes that + use ACPI power resources for power management and support ACPI + power state D1. + + If present, it contains symbolic links to device directories + representing ACPI power resources that need to be turned on for + the given device node to be in ACPI power state D1. The names + of the links are the same as the names of the directories they + point to. diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D2 b/Documentation/ABI/testing/sysfs-devices-power_resources_D2 new file mode 100644 index 000000000000..fd9d84b421e1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D2 @@ -0,0 +1,14 @@ +What: /sys/devices/.../power_resources_D2/ +Date: January 2013 +Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +Description: + The /sys/devices/.../power_resources_D2/ directory is only + present for device objects representing ACPI device nodes that + use ACPI power resources for power management and support ACPI + power state D2. + + If present, it contains symbolic links to device directories + representing ACPI power resources that need to be turned on for + the given device node to be in ACPI power state D2. The names + of the links are the same as the names of the directories they + point to. diff --git a/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot b/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot new file mode 100644 index 000000000000..3df32c20addf --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-power_resources_D3hot @@ -0,0 +1,14 @@ +What: /sys/devices/.../power_resources_D3hot/ +Date: January 2013 +Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +Description: + The /sys/devices/.../power_resources_D3hot/ directory is only + present for device objects representing ACPI device nodes that + use ACPI power resources for power management and support ACPI + power state D3hot. + + If present, it contains symbolic links to device directories + representing ACPI power resources that need to be turned on for + the given device node to be in ACPI power state D3hot. The + names of the links are the same as the names of the directories + they point to. diff --git a/Documentation/ABI/testing/sysfs-devices-power_state b/Documentation/ABI/testing/sysfs-devices-power_state new file mode 100644 index 000000000000..7ad9546748f0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-power_state @@ -0,0 +1,20 @@ +What: /sys/devices/.../power_state +Date: January 2013 +Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +Description: + The /sys/devices/.../power_state attribute is only present for + device objects representing ACPI device nodes that provide power + management methods. + + If present, it contains a string representing the current ACPI + power state of the given device node. Its possible values, + "D0", "D1", "D2", "D3hot", and "D3cold", reflect the power state + names defined by the ACPI specification (ACPI 4 and above). + + If the device node uses shared ACPI power resources, this state + determines a list of power resources required not to be turned + off. However, some power resources needed by the device node in + higher-power (lower-number) states may also be ON because of + some other devices using them at the moment. + + This attribute is read-only. diff --git a/Documentation/ABI/testing/sysfs-devices-real_power_state b/Documentation/ABI/testing/sysfs-devices-real_power_state new file mode 100644 index 000000000000..8b3527c82a7d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-real_power_state @@ -0,0 +1,23 @@ +What: /sys/devices/.../real_power_state +Date: January 2013 +Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +Description: + The /sys/devices/.../real_power_state attribute is only present + for device objects representing ACPI device nodes that provide + power management methods and use ACPI power resources for power + management. + + If present, it contains a string representing the real ACPI + power state of the given device node as returned by the _PSC + control method or inferred from the configuration of power + resources. Its possible values, "D0", "D1", "D2", "D3hot", and + "D3cold", reflect the power state names defined by the ACPI + specification (ACPI 4 and above). + + In some situations the value of this attribute may be different + from the value of the /sys/devices/.../power_state attribute for + the same device object. If that happens, some shared power + resources used by the device node are only ON because of some + other devices using them at the moment. + + This attribute is read-only. diff --git a/Documentation/ABI/testing/sysfs-devices-resource_in_use b/Documentation/ABI/testing/sysfs-devices-resource_in_use new file mode 100644 index 000000000000..b4a3bc5922a3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-resource_in_use @@ -0,0 +1,12 @@ +What: /sys/devices/.../resource_in_use +Date: January 2013 +Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +Description: + The /sys/devices/.../resource_in_use attribute is only present + for device objects representing ACPI power resources. + + If present, it contains a number (0 or 1) representing the + current status of the given power resource (0 means that the + resource is not in use and therefore it has been turned off). + + This attribute is read-only. diff --git a/Documentation/ABI/testing/sysfs-platform-ts5500 b/Documentation/ABI/testing/sysfs-platform-ts5500 new file mode 100644 index 000000000000..c88375a537a1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-ts5500 @@ -0,0 +1,47 @@ +What: /sys/devices/platform/ts5500/adc +Date: January 2013 +KernelVersion: 3.7 +Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com> +Description: + Indicates the presence of an A/D Converter. If it is present, + it will display "1", otherwise "0". + +What: /sys/devices/platform/ts5500/ereset +Date: January 2013 +KernelVersion: 3.7 +Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com> +Description: + Indicates the presence of an external reset. If it is present, + it will display "1", otherwise "0". + +What: /sys/devices/platform/ts5500/id +Date: January 2013 +KernelVersion: 3.7 +Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com> +Description: + Product ID of the TS board. TS-5500 ID is 0x60. + +What: /sys/devices/platform/ts5500/jumpers +Date: January 2013 +KernelVersion: 3.7 +Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com> +Description: + Bitfield showing the jumpers' state. If a jumper is present, + the corresponding bit is set. For instance, 0x0e means jumpers + 2, 3 and 4 are set. + +What: /sys/devices/platform/ts5500/rs485 +Date: January 2013 +KernelVersion: 3.7 +Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com> +Description: + Indicates the presence of the RS485 option. If it is present, + it will display "1", otherwise "0". + +What: /sys/devices/platform/ts5500/sram +Date: January 2013 +KernelVersion: 3.7 +Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com> +Description: + Indicates the presence of the SRAM option. If it is present, + it will display "1", otherwise "0". |