diff options
Diffstat (limited to 'Documentation/ABI')
22 files changed, 1006 insertions, 264 deletions
diff --git a/Documentation/ABI/obsolete/procfs-i8k b/Documentation/ABI/obsolete/procfs-i8k new file mode 100644 index 000000000000..32df4d5bdd15 --- /dev/null +++ b/Documentation/ABI/obsolete/procfs-i8k @@ -0,0 +1,10 @@ +What: /proc/i8k +Date: November 2001 +KernelVersion: 2.4.14 +Contact: Pali Rohár <pali@kernel.org> +Description: Legacy interface for getting/setting sensor information like + fan speed, temperature, serial number, hotkey status etc + on Dell Laptops. + Since the driver is now using the standard hwmon sysfs interface, + the procfs interface is deprecated. +Users: https://github.com/vitorafsr/i8kutils diff --git a/Documentation/ABI/removed/sysfs-mce b/Documentation/ABI/removed/sysfs-mce new file mode 100644 index 000000000000..ef5dd2a80918 --- /dev/null +++ b/Documentation/ABI/removed/sysfs-mce @@ -0,0 +1,37 @@ +What: /sys/devices/system/machinecheck/machinecheckX/tolerant +Contact: Borislav Petkov <bp@suse.de> +Date: Dec, 2021 +Description: + Unused and obsolete after the advent of recoverable machine + checks (see last sentence below) and those are present since + 2010 (Nehalem). + + Original description: + + The entries appear for each CPU, but they are truly shared + between all CPUs. + + Tolerance level. When a machine check exception occurs for a + non corrected machine check the kernel can take different + actions. + + Since machine check exceptions can happen any time it is + sometimes risky for the kernel to kill a process because it + defies normal kernel locking rules. The tolerance level + configures how hard the kernel tries to recover even at some + risk of deadlock. Higher tolerant values trade potentially + better uptime with the risk of a crash or even corruption + (for tolerant >= 3). + + == =========================================================== + 0 always panic on uncorrected errors, log corrected errors + 1 panic or SIGBUS on uncorrected errors, log corrected errors + 2 SIGBUS or log uncorrected errors, log corrected errors + 3 never panic or SIGBUS, log all errors (for testing only) + == =========================================================== + + Default: 1 + + Note this only makes a difference if the CPU allows recovery + from a machine check exception. Current x86 CPUs generally + do not. diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index 8dd3e84a8aad..e8797cd09aff 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -155,6 +155,55 @@ Description: last zone of the device which may be smaller. +What: /sys/block/<disk>/queue/crypto/ +Date: February 2022 +Contact: linux-block@vger.kernel.org +Description: + The presence of this subdirectory of /sys/block/<disk>/queue/ + indicates that the device supports inline encryption. This + subdirectory contains files which describe the inline encryption + capabilities of the device. For more information about inline + encryption, refer to Documentation/block/inline-encryption.rst. + + +What: /sys/block/<disk>/queue/crypto/max_dun_bits +Date: February 2022 +Contact: linux-block@vger.kernel.org +Description: + [RO] This file shows the maximum length, in bits, of data unit + numbers accepted by the device in inline encryption requests. + + +What: /sys/block/<disk>/queue/crypto/modes/<mode> +Date: February 2022 +Contact: linux-block@vger.kernel.org +Description: + [RO] For each crypto mode (i.e., encryption/decryption + algorithm) the device supports with inline encryption, a file + will exist at this location. It will contain a hexadecimal + number that is a bitmask of the supported data unit sizes, in + bytes, for that crypto mode. + + Currently, the crypto modes that may be supported are: + + * AES-256-XTS + * AES-128-CBC-ESSIV + * Adiantum + + For example, if a device supports AES-256-XTS inline encryption + with data unit sizes of 512 and 4096 bytes, the file + /sys/block/<disk>/queue/crypto/modes/AES-256-XTS will exist and + will contain "0x1200". + + +What: /sys/block/<disk>/queue/crypto/num_keyslots +Date: February 2022 +Contact: linux-block@vger.kernel.org +Description: + [RO] This file shows the number of keyslots the device has for + use with inline encryption. + + What: /sys/block/<disk>/queue/dax Date: June 2016 Contact: linux-block@vger.kernel.org diff --git a/Documentation/ABI/stable/sysfs-devices-system-cpu b/Documentation/ABI/stable/sysfs-devices-system-cpu index 3965ce504484..902392d7eddf 100644 --- a/Documentation/ABI/stable/sysfs-devices-system-cpu +++ b/Documentation/ABI/stable/sysfs-devices-system-cpu @@ -86,6 +86,10 @@ What: /sys/devices/system/cpu/cpuX/topology/die_cpus Description: internal kernel map of CPUs within the same die. Values: hexadecimal bitmask. +What: /sys/devices/system/cpu/cpuX/topology/ppin +Description: per-socket protected processor inventory number +Values: hexadecimal. + What: /sys/devices/system/cpu/cpuX/topology/die_cpus_list Description: human-readable list of CPUs within the same die. The format is like 0-3, 8-11, 14,17. diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre index b4be5f1db4b7..396de7bc735d 100644 --- a/Documentation/ABI/testing/debugfs-hisi-hpre +++ b/Documentation/ABI/testing/debugfs-hisi-hpre @@ -1,140 +1,150 @@ -What: /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/regs -Date: Sep 2019 -Contact: linux-crypto@vger.kernel.org -Description: Dump debug registers from the HPRE cluster. +What: /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/regs +Date: Sep 2019 +Contact: linux-crypto@vger.kernel.org +Description: Dump debug registers from the HPRE cluster. Only available for PF. -What: /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/cluster_ctrl -Date: Sep 2019 -Contact: linux-crypto@vger.kernel.org -Description: Write the HPRE core selection in the cluster into this file, +What: /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/cluster_ctrl +Date: Sep 2019 +Contact: linux-crypto@vger.kernel.org +Description: Write the HPRE core selection in the cluster into this file, and then we can read the debug information of the core. Only available for PF. -What: /sys/kernel/debug/hisi_hpre/<bdf>/rdclr_en -Date: Sep 2019 -Contact: linux-crypto@vger.kernel.org -Description: HPRE cores debug registers read clear control. 1 means enable +What: /sys/kernel/debug/hisi_hpre/<bdf>/rdclr_en +Date: Sep 2019 +Contact: linux-crypto@vger.kernel.org +Description: HPRE cores debug registers read clear control. 1 means enable register read clear, otherwise 0. Writing to this file has no functional effect, only enable or disable counters clear after reading of these registers. Only available for PF. -What: /sys/kernel/debug/hisi_hpre/<bdf>/current_qm -Date: Sep 2019 -Contact: linux-crypto@vger.kernel.org -Description: One HPRE controller has one PF and multiple VFs, each function +What: /sys/kernel/debug/hisi_hpre/<bdf>/current_qm +Date: Sep 2019 +Contact: linux-crypto@vger.kernel.org +Description: One HPRE controller has one PF and multiple VFs, each function has a QM. Select the QM which below qm refers to. Only available for PF. -What: /sys/kernel/debug/hisi_hpre/<bdf>/regs -Date: Sep 2019 -Contact: linux-crypto@vger.kernel.org -Description: Dump debug registers from the HPRE. +What: /sys/kernel/debug/hisi_hpre/<bdf>/alg_qos +Date: Jun 2021 +Contact: linux-crypto@vger.kernel.org +Description: The <bdf> is related the function for PF and VF. + HPRE driver supports to configure each function's QoS, the driver + supports to write <bdf> value to alg_qos in the host. Such as + "echo <bdf> value > alg_qos". The qos value is 1~1000, means + 1/1000~1000/1000 of total QoS. The driver reading alg_qos to + get related QoS in the host and VM, Such as "cat alg_qos". + +What: /sys/kernel/debug/hisi_hpre/<bdf>/regs +Date: Sep 2019 +Contact: linux-crypto@vger.kernel.org +Description: Dump debug registers from the HPRE. Only available for PF. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/regs -Date: Sep 2019 -Contact: linux-crypto@vger.kernel.org -Description: Dump debug registers from the QM. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/regs +Date: Sep 2019 +Contact: linux-crypto@vger.kernel.org +Description: Dump debug registers from the QM. Available for PF and VF in host. VF in guest currently only has one debug register. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q -Date: Sep 2019 -Contact: linux-crypto@vger.kernel.org -Description: One QM may contain multiple queues. Select specific queue to +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q +Date: Sep 2019 +Contact: linux-crypto@vger.kernel.org +Description: One QM may contain multiple queues. Select specific queue to show its debug registers in above regs. Only available for PF. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable -Date: Sep 2019 -Contact: linux-crypto@vger.kernel.org -Description: QM debug registers(regs) read clear control. 1 means enable +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable +Date: Sep 2019 +Contact: linux-crypto@vger.kernel.org +Description: QM debug registers(regs) read clear control. 1 means enable register read clear, otherwise 0. Writing to this file has no functional effect, only enable or disable counters clear after reading of these registers. Only available for PF. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/err_irq -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of invalid interrupts for +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/err_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of invalid interrupts for QM task completion. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/aeq_irq -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of QM async event queue interrupts. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/aeq_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of QM async event queue interrupts. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/abnormal_irq -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of interrupts for QM abnormal event. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/abnormal_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of interrupts for QM abnormal event. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/create_qp_err -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of queue allocation errors. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/create_qp_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of queue allocation errors. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/mb_err -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of failed QM mailbox commands. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/mb_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of failed QM mailbox commands. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/status -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the status of the QM. +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/status +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the status of the QM. Four states: initiated, started, stopped and closed. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of sent requests. +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of sent requests. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/recv_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of received requests. +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/recv_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of received requests. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_busy_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of requests sent +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_busy_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of requests sent with returning busy. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_fail_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of completed but error requests. +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_fail_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of completed but error requests. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/invalid_req_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of invalid requests being received. +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/invalid_req_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of invalid requests being received. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/overtime_thrhld -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Set the threshold time for counting the request which is +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/overtime_thrhld +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Set the threshold time for counting the request which is processed longer than the threshold. 0: disable(default), 1: 1 microsecond. Available for both PF and VF, and take no other effect on HPRE. -What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/over_thrhld_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of time out requests. +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/over_thrhld_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of time out requests. Available for both PF and VF, and take no other effect on HPRE. diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec index 85feb4408e0f..2bf84ced484b 100644 --- a/Documentation/ABI/testing/debugfs-hisi-sec +++ b/Documentation/ABI/testing/debugfs-hisi-sec @@ -1,113 +1,123 @@ -What: /sys/kernel/debug/hisi_sec2/<bdf>/clear_enable -Date: Oct 2019 -Contact: linux-crypto@vger.kernel.org -Description: Enabling/disabling of clear action after reading +What: /sys/kernel/debug/hisi_sec2/<bdf>/clear_enable +Date: Oct 2019 +Contact: linux-crypto@vger.kernel.org +Description: Enabling/disabling of clear action after reading the SEC debug registers. 0: disable, 1: enable. Only available for PF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/current_qm -Date: Oct 2019 -Contact: linux-crypto@vger.kernel.org -Description: One SEC controller has one PF and multiple VFs, each function +What: /sys/kernel/debug/hisi_sec2/<bdf>/current_qm +Date: Oct 2019 +Contact: linux-crypto@vger.kernel.org +Description: One SEC controller has one PF and multiple VFs, each function has a QM. This file can be used to select the QM which below qm refers to. Only available for PF. -What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_regs -Date: Oct 2019 -Contact: linux-crypto@vger.kernel.org -Description: Dump of QM related debug registers. +What: /sys/kernel/debug/hisi_sec2/<bdf>/alg_qos +Date: Jun 2021 +Contact: linux-crypto@vger.kernel.org +Description: The <bdf> is related the function for PF and VF. + SEC driver supports to configure each function's QoS, the driver + supports to write <bdf> value to alg_qos in the host. Such as + "echo <bdf> value > alg_qos". The qos value is 1~1000, means + 1/1000~1000/1000 of total QoS. The driver reading alg_qos to + get related QoS in the host and VM, Such as "cat alg_qos". + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_regs +Date: Oct 2019 +Contact: linux-crypto@vger.kernel.org +Description: Dump of QM related debug registers. Available for PF and VF in host. VF in guest currently only has one debug register. -What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/current_q -Date: Oct 2019 -Contact: linux-crypto@vger.kernel.org -Description: One QM of SEC may contain multiple queues. Select specific +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/current_q +Date: Oct 2019 +Contact: linux-crypto@vger.kernel.org +Description: One QM of SEC may contain multiple queues. Select specific queue to show its debug registers in above 'regs'. Only available for PF. -What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/clear_enable -Date: Oct 2019 -Contact: linux-crypto@vger.kernel.org -Description: Enabling/disabling of clear action after reading +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/clear_enable +Date: Oct 2019 +Contact: linux-crypto@vger.kernel.org +Description: Enabling/disabling of clear action after reading the SEC's QM debug registers. 0: disable, 1: enable. Only available for PF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/err_irq -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of invalid interrupts for +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/err_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of invalid interrupts for QM task completion. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/aeq_irq -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of QM async event queue interrupts. +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/aeq_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of QM async event queue interrupts. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/abnormal_irq -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of interrupts for QM abnormal event. +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/abnormal_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of interrupts for QM abnormal event. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/create_qp_err -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of queue allocation errors. +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/create_qp_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of queue allocation errors. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/mb_err -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of failed QM mailbox commands. +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/mb_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of failed QM mailbox commands. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/status -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the status of the QM. +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/status +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the status of the QM. Four states: initiated, started, stopped and closed. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of sent requests. +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of sent requests. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/recv_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of received requests. +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/recv_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of received requests. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_busy_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of requests sent with returning busy. +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_busy_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of requests sent with returning busy. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/err_bd_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of BD type error requests +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/err_bd_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of BD type error requests to be received. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/invalid_req_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of invalid requests being received. +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/invalid_req_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of invalid requests being received. Available for both PF and VF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/done_flag_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of completed but marked error requests +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/done_flag_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of completed but marked error requests to be received. Available for both PF and VF, and take no other effect on SEC. diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip index 3034a2bf99ca..bf1258bc6495 100644 --- a/Documentation/ABI/testing/debugfs-hisi-zip +++ b/Documentation/ABI/testing/debugfs-hisi-zip @@ -1,114 +1,124 @@ -What: /sys/kernel/debug/hisi_zip/<bdf>/comp_core[01]/regs -Date: Nov 2018 -Contact: linux-crypto@vger.kernel.org -Description: Dump of compression cores related debug registers. +What: /sys/kernel/debug/hisi_zip/<bdf>/comp_core[01]/regs +Date: Nov 2018 +Contact: linux-crypto@vger.kernel.org +Description: Dump of compression cores related debug registers. Only available for PF. -What: /sys/kernel/debug/hisi_zip/<bdf>/decomp_core[0-5]/regs -Date: Nov 2018 -Contact: linux-crypto@vger.kernel.org -Description: Dump of decompression cores related debug registers. +What: /sys/kernel/debug/hisi_zip/<bdf>/decomp_core[0-5]/regs +Date: Nov 2018 +Contact: linux-crypto@vger.kernel.org +Description: Dump of decompression cores related debug registers. Only available for PF. -What: /sys/kernel/debug/hisi_zip/<bdf>/clear_enable -Date: Nov 2018 -Contact: linux-crypto@vger.kernel.org -Description: Compression/decompression core debug registers read clear +What: /sys/kernel/debug/hisi_zip/<bdf>/clear_enable +Date: Nov 2018 +Contact: linux-crypto@vger.kernel.org +Description: Compression/decompression core debug registers read clear control. 1 means enable register read clear, otherwise 0. Writing to this file has no functional effect, only enable or disable counters clear after reading of these registers. Only available for PF. -What: /sys/kernel/debug/hisi_zip/<bdf>/current_qm -Date: Nov 2018 -Contact: linux-crypto@vger.kernel.org -Description: One ZIP controller has one PF and multiple VFs, each function +What: /sys/kernel/debug/hisi_zip/<bdf>/current_qm +Date: Nov 2018 +Contact: linux-crypto@vger.kernel.org +Description: One ZIP controller has one PF and multiple VFs, each function has a QM. Select the QM which below qm refers to. Only available for PF. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/regs -Date: Nov 2018 -Contact: linux-crypto@vger.kernel.org -Description: Dump of QM related debug registers. +What: /sys/kernel/debug/hisi_zip/<bdf>/alg_qos +Date: Jun 2021 +Contact: linux-crypto@vger.kernel.org +Description: The <bdf> is related the function for PF and VF. + ZIP driver supports to configure each function's QoS, the driver + supports to write <bdf> value to alg_qos in the host. Such as + "echo <bdf> value > alg_qos". The qos value is 1~1000, means + 1/1000~1000/1000 of total QoS. The driver reading alg_qos to + get related QoS in the host and VM, Such as "cat alg_qos". + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/regs +Date: Nov 2018 +Contact: linux-crypto@vger.kernel.org +Description: Dump of QM related debug registers. Available for PF and VF in host. VF in guest currently only has one debug register. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/current_q -Date: Nov 2018 -Contact: linux-crypto@vger.kernel.org -Description: One QM may contain multiple queues. Select specific queue to +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/current_q +Date: Nov 2018 +Contact: linux-crypto@vger.kernel.org +Description: One QM may contain multiple queues. Select specific queue to show its debug registers in above regs. Only available for PF. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/clear_enable -Date: Nov 2018 -Contact: linux-crypto@vger.kernel.org -Description: QM debug registers(regs) read clear control. 1 means enable +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/clear_enable +Date: Nov 2018 +Contact: linux-crypto@vger.kernel.org +Description: QM debug registers(regs) read clear control. 1 means enable register read clear, otherwise 0. Writing to this file has no functional effect, only enable or disable counters clear after reading of these registers. Only available for PF. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/err_irq -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of invalid interrupts for +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/err_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of invalid interrupts for QM task completion. Available for both PF and VF, and take no other effect on ZIP. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/aeq_irq -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of QM async event queue interrupts. +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/aeq_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of QM async event queue interrupts. Available for both PF and VF, and take no other effect on ZIP. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/abnormal_irq -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of interrupts for QM abnormal event. +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/abnormal_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of interrupts for QM abnormal event. Available for both PF and VF, and take no other effect on ZIP. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/create_qp_err -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of queue allocation errors. +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/create_qp_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of queue allocation errors. Available for both PF and VF, and take no other effect on ZIP. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/mb_err -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the number of failed QM mailbox commands. +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/mb_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of failed QM mailbox commands. Available for both PF and VF, and take no other effect on ZIP. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/status -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the status of the QM. +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/status +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the status of the QM. Four states: initiated, started, stopped and closed. Available for both PF and VF, and take no other effect on ZIP. -What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of sent requests. +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of sent requests. Available for both PF and VF, and take no other effect on ZIP. -What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/recv_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of received requests. +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/recv_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of received requests. Available for both PF and VF, and take no other effect on ZIP. -What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_busy_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of requests received +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_busy_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of requests received with returning busy. Available for both PF and VF, and take no other effect on ZIP. -What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/err_bd_cnt -Date: Apr 2020 -Contact: linux-crypto@vger.kernel.org -Description: Dump the total number of BD type error requests +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/err_bd_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of BD type error requests to be received. Available for both PF and VF, and take no other effect on ZIP. diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 0b6a2e6e8fbb..7c2b846521f3 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -1,3 +1,12 @@ +What: /sys/bus/cxl/flush +Date: Januarry, 2022 +KernelVersion: v5.18 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) If userspace manually unbinds a port the kernel schedules + all descendant memdevs for unbind. Writing '1' to this attribute + flushes that work. + What: /sys/bus/cxl/devices/memX/firmware_version Date: December, 2020 KernelVersion: v5.12 @@ -25,6 +34,24 @@ Description: identically named field in the Identify Memory Device Output Payload in the CXL-2.0 specification. +What: /sys/bus/cxl/devices/memX/serial +Date: January, 2022 +KernelVersion: v5.18 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) 64-bit serial number per the PCIe Device Serial Number + capability. Mandatory for CXL devices, see CXL 2.0 8.1.12.2 + Memory Device PCIe Capabilities and Extended Capabilities. + +What: /sys/bus/cxl/devices/memX/numa_node +Date: January, 2022 +KernelVersion: v5.18 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) If NUMA is enabled and the platform has affinitized the + host PCI device for this memory device, emit the CPU node + affinity for this device. + What: /sys/bus/cxl/devices/*/devtype Date: June, 2021 KernelVersion: v5.14 @@ -34,6 +61,15 @@ Description: the same value communicated in the DEVTYPE environment variable for uevents for devices on the "cxl" bus. +What: /sys/bus/cxl/devices/*/modalias +Date: December, 2021 +KernelVersion: v5.18 +Contact: linux-cxl@vger.kernel.org +Description: + CXL device objects export the modalias attribute which mirrors + the same value communicated in the MODALIAS environment variable + for uevents for devices on the "cxl" bus. + What: /sys/bus/cxl/devices/portX/uport Date: June, 2021 KernelVersion: v5.14 diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem index 95254cec92bf..4ac0673901e7 100644 --- a/Documentation/ABI/testing/sysfs-bus-papr-pmem +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem @@ -61,3 +61,15 @@ Description: * "CchRHCnt" : Cache Read Hit Count * "CchWHCnt" : Cache Write Hit Count * "FastWCnt" : Fast Write Count + +What: /sys/bus/nd/devices/nmemX/papr/health_bitmap_inject +Date: Jan, 2022 +KernelVersion: v5.17 +Contact: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, nvdimm@lists.linux.dev, +Description: + (RO) Reports the health bitmap inject bitmap that is applied to + bitmap received from PowerVM via the H_SCM_HEALTH. This is used + to forcibly set specific bits returned from Hcall. These is then + used to simulate various health or shutdown states for an nvdimm + and are set by user-space tools like ndctl by issuing a PAPR DSM. + diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes index 13e31c6a0e9c..05820365f1ec 100644 --- a/Documentation/ABI/testing/sysfs-class-firmware-attributes +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes @@ -246,6 +246,51 @@ Description: that is being referenced (e.g hdd0, hdd1 etc) This attribute defaults to device 0. + certificate: + signature: + save_signature: + These attributes are used for certificate based authentication. This is + used in conjunction with a signing server as an alternative to password + based authentication. + The user writes to the attribute(s) with a BASE64 encoded string obtained + from the signing server. + The attributes can be displayed to check the stored value. + + Some usage examples: + Installing a certificate to enable feature: + echo <supervisor password > authentication/Admin/current_password + echo <signed certificate> > authentication/Admin/certificate + + Updating the installed certificate: + echo <signature> > authentication/Admin/signature + echo <signed certificate> > authentication/Admin/certificate + + Removing the installed certificate: + echo <signature> > authentication/Admin/signature + echo '' > authentication/Admin/certificate + + Changing a BIOS setting: + echo <signature> > authentication/Admin/signature + echo <save signature> > authentication/Admin/save_signature + echo Enable > attribute/PasswordBeep/current_value + + You cannot enable certificate authentication if a supervisor password + has not been set. + Clearing the certificate results in no bios-admin authentication method + being configured allowing anyone to make changes. + After any of these operations the system must reboot for the changes to + take effect. + + certificate_thumbprint: + Read only attribute used to display the MD5, SHA1 and SHA256 thumbprints + for the certificate installed in the BIOS. + + certificate_to_password: + Write only attribute used to switch from certificate based authentication + back to password based. + Usage: + echo <signature> > authentication/Admin/signature + echo <password> > authentication/Admin/certificate_to_password What: /sys/class/firmware-attributes/*/attributes/pending_reboot diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon index 1f20687def44..653d4c75eddb 100644 --- a/Documentation/ABI/testing/sysfs-class-hwmon +++ b/Documentation/ABI/testing/sysfs-class-hwmon @@ -9,6 +9,14 @@ Description: RO +What: /sys/class/hwmon/hwmonX/label +Description: + A descriptive label that allows to uniquely identify a + device within the system. + The contents of the label are free-form. + + RO + What: /sys/class/hwmon/hwmonX/update_interval Description: The interval at which the chip will update readings. diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index 1a04e729cc77..a9ce63cfbe87 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -472,6 +472,7 @@ Description: auto: Charge normally, respect thresholds inhibit-charge: Do not charge while AC is attached force-discharge: Force discharge while AC is attached + ================ ==================================== What: /sys/class/power_supply/<supply_name>/technology Date: May 2007 diff --git a/Documentation/ABI/testing/sysfs-class-thermal b/Documentation/ABI/testing/sysfs-class-thermal index 2c52bb1f864c..8eee37982b2a 100644 --- a/Documentation/ABI/testing/sysfs-class-thermal +++ b/Documentation/ABI/testing/sysfs-class-thermal @@ -203,7 +203,7 @@ Description: - for generic ACPI: should be "Fan", "Processor" or "LCD" - for memory controller device on intel_menlow platform: - should be "Memory controller". + should be "Memory controller". RO, Required diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 61f5676a7429..2ad01cad7f1c 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -73,6 +73,7 @@ What: /sys/devices/system/cpu/cpuX/topology/core_id /sys/devices/system/cpu/cpuX/topology/physical_package_id /sys/devices/system/cpu/cpuX/topology/thread_siblings /sys/devices/system/cpu/cpuX/topology/thread_siblings_list + /sys/devices/system/cpu/cpuX/topology/ppin Date: December 2008 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> Description: CPU topology files that describe a logical CPU's relationship @@ -103,6 +104,11 @@ Description: CPU topology files that describe a logical CPU's relationship thread_siblings_list: human-readable list of cpuX's hardware threads within the same core as cpuX + ppin: human-readable Protected Processor Identification + Number of the socket the cpu# belongs to. There should be + one per physical_package_id. File is readable only to + admin. + See Documentation/admin-guide/cputopology.rst for more information. @@ -662,6 +668,7 @@ Description: Preferred MTE tag checking mode ================ ============================================== "sync" Prefer synchronous mode + "asymm" Prefer asymmetric mode "async" Prefer asynchronous mode ================ ============================================== diff --git a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing index b363827da437..910df0e5815a 100644 --- a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing +++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing @@ -1,4 +1,4 @@ -What: /sys/bus/platform/drivers/aspeed-uart-routing/*/uart* +What: /sys/bus/platform/drivers/aspeed-uart-routing/\*/uart\* Date: September 2021 Contact: Oskar Senft <osk@google.com> Chia-Wei Wang <chiawei_wang@aspeedtech.com> @@ -9,7 +9,7 @@ Description: Selects the RX source of the UARTx device. depends on the selected file. e.g. - cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1 + cat /sys/bus/platform/drivers/aspeed-uart-routing/\*.uart_routing/uart1 [io1] io2 io3 io4 uart2 uart3 uart4 io6 In this case, UART1 gets its input from IO1 (physical serial port 1). @@ -17,7 +17,7 @@ Description: Selects the RX source of the UARTx device. Users: OpenBMC. Proposed changes should be mailed to openbmc@lists.ozlabs.org -What: /sys/bus/platform/drivers/aspeed-uart-routing/*/io* +What: /sys/bus/platform/drivers/aspeed-uart-routing/\*/io\* Date: September 2021 Contact: Oskar Senft <osk@google.com> Chia-Wei Wang <chiawei_wang@aspeedtech.com> diff --git a/Documentation/ABI/testing/sysfs-driver-intel_sdsi b/Documentation/ABI/testing/sysfs-driver-intel_sdsi new file mode 100644 index 000000000000..ab122125ff9a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-intel_sdsi @@ -0,0 +1,77 @@ +What: /sys/bus/auxiliary/devices/intel_vsec.sdsi.X +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "David E. Box" <david.e.box@linux.intel.com> +Description: + This directory contains interface files for accessing Intel + Software Defined Silicon (SDSi) features on a CPU. X + represents the socket instance (though not the socket ID). + The socket ID is determined by reading the registers file + and decoding it per the specification. + + Some files communicate with SDSi hardware through a mailbox. + Should the operation fail, one of the following error codes + may be returned: + + Error Code Cause + ---------- ----- + EIO General mailbox failure. Log may indicate cause. + EBUSY Mailbox is owned by another agent. + EPERM SDSI capability is not enabled in hardware. + EPROTO Failure in mailbox protocol detected by driver. + See log for details. + EOVERFLOW For provision commands, the size of the data + exceeds what may be written. + ESPIPE Seeking is not allowed. + ETIMEDOUT Failure to complete mailbox transaction in time. + +What: /sys/bus/auxiliary/devices/intel_vsec.sdsi.X/guid +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "David E. Box" <david.e.box@linux.intel.com> +Description: + (RO) The GUID for the registers file. The GUID identifies + the layout of the registers file in this directory. + Information about the register layouts for a particular GUID + is available at http://github.com/intel/intel-sdsi + +What: /sys/bus/auxiliary/devices/intel_vsec.sdsi.X/registers +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "David E. Box" <david.e.box@linux.intel.com> +Description: + (RO) Contains information needed by applications to provision + a CPU and monitor status information. The layout of this file + is determined by the GUID in this directory. Information about + the layout for a particular GUID is available at + http://github.com/intel/intel-sdsi + +What: /sys/bus/auxiliary/devices/intel_vsec.sdsi.X/provision_akc +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "David E. Box" <david.e.box@linux.intel.com> +Description: + (WO) Used to write an Authentication Key Certificate (AKC) to + the SDSi NVRAM for the CPU. The AKC is used to authenticate a + Capability Activation Payload. Mailbox command. + +What: /sys/bus/auxiliary/devices/intel_vsec.sdsi.X/provision_cap +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "David E. Box" <david.e.box@linux.intel.com> +Description: + (WO) Used to write a Capability Activation Payload (CAP) to the + SDSi NVRAM for the CPU. CAPs are used to activate a given CPU + feature. A CAP is validated by SDSi hardware using a previously + provisioned AKC file. Upon successful authentication, the CPU + configuration is updated. A cold reboot is required to fully + activate the feature. Mailbox command. + +What: /sys/bus/auxiliary/devices/intel_vsec.sdsi.X/state_certificate +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "David E. Box" <david.e.box@linux.intel.com> +Description: + (RO) Used to read back the current State Certificate for the CPU + from SDSi hardware. The State Certificate contains information + about the current licenses on the CPU. Mailbox command. diff --git a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info new file mode 100644 index 000000000000..141a6b371469 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info @@ -0,0 +1,29 @@ +What: /sys/firmware/papr/energy_scale_info +Date: February 2022 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: Directory hosting a set of platform attributes like + energy/frequency on Linux running as a PAPR guest. + + Each file in a directory contains a platform + attribute hierarchy pertaining to performance/ + energy-savings mode and processor frequency. + +What: /sys/firmware/papr/energy_scale_info/<id> +Date: February 2022 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: Energy, frequency attributes directory for POWERVM servers + +What: /sys/firmware/papr/energy_scale_info/<id>/desc +Date: February 2022 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: String description of the energy attribute of <id> + +What: /sys/firmware/papr/energy_scale_info/<id>/value +Date: February 2022 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: Numeric value of the energy attribute of <id> + +What: /sys/firmware/papr/energy_scale_info/<id>/value_desc +Date: February 2022 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: String value of the energy attribute of <id> diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 2416b03ff283..9b583dd0298b 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -55,8 +55,9 @@ Description: Controls the in-place-update policy. 0x04 F2FS_IPU_UTIL 0x08 F2FS_IPU_SSR_UTIL 0x10 F2FS_IPU_FSYNC - 0x20 F2FS_IPU_ASYNC, + 0x20 F2FS_IPU_ASYNC 0x40 F2FS_IPU_NOCACHE + 0x80 F2FS_IPU_HONOR_OPU_WRITE ==== ================= Refer segment.h for details. @@ -98,6 +99,33 @@ Description: Controls the issue rate of discard commands that consist of small checkpoint is triggered, and issued during the checkpoint. By default, it is disabled with 0. +What: /sys/fs/f2fs/<disk>/max_discard_request +Date: December 2021 +Contact: "Konstantin Vyshetsky" <vkon@google.com> +Description: Controls the number of discards a thread will issue at a time. + Higher number will allow the discard thread to finish its work + faster, at the cost of higher latency for incomming I/O. + +What: /sys/fs/f2fs/<disk>/min_discard_issue_time +Date: December 2021 +Contact: "Konstantin Vyshetsky" <vkon@google.com> +Description: Controls the interval the discard thread will wait between + issuing discard requests when there are discards to be issued and + no I/O aware interruptions occur. + +What: /sys/fs/f2fs/<disk>/mid_discard_issue_time +Date: December 2021 +Contact: "Konstantin Vyshetsky" <vkon@google.com> +Description: Controls the interval the discard thread will wait between + issuing discard requests when there are discards to be issued and + an I/O aware interruption occurs. + +What: /sys/fs/f2fs/<disk>/max_discard_issue_time +Date: December 2021 +Contact: "Konstantin Vyshetsky" <vkon@google.com> +Description: Controls the interval the discard thread will wait when there are + no discard operations to be issued. + What: /sys/fs/f2fs/<disk>/discard_granularity Date: July 2017 Contact: "Chao Yu" <yuchao0@huawei.com> @@ -269,11 +297,16 @@ Description: Shows current reserved blocks in system, it may be temporarily What: /sys/fs/f2fs/<disk>/gc_urgent Date: August 2017 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> -Description: Do background GC aggressively when set. When gc_urgent = 1, - background thread starts to do GC by given gc_urgent_sleep_time - interval. When gc_urgent = 2, F2FS will lower the bar of - checking idle in order to process outstanding discard commands - and GC a little bit aggressively. It is set to 0 by default. +Description: Do background GC aggressively when set. Set to 0 by default. + gc urgent high(1): does GC forcibly in a period of given + gc_urgent_sleep_time and ignores I/O idling check. uses greedy + GC approach and turns SSR mode on. + gc urgent low(2): lowers the bar of checking I/O idling in + order to process outstanding discard commands and GC a + little bit aggressively. uses cost benefit GC approach. + gc urgent mid(3): does GC forcibly in a period of given + gc_urgent_sleep_time and executes a mid level of I/O idling check. + uses cost benefit GC approach. What: /sys/fs/f2fs/<disk>/gc_urgent_sleep_time Date: August 2017 @@ -430,6 +463,7 @@ Description: Show status of f2fs superblock in real time. 0x800 SBI_QUOTA_SKIP_FLUSH skip flushing quota in current CP 0x1000 SBI_QUOTA_NEED_REPAIR quota file may be corrupted 0x2000 SBI_IS_RESIZEFS resizefs is in process + 0x4000 SBI_IS_FREEZING freefs is in process ====== ===================== ================================= What: /sys/fs/f2fs/<disk>/ckpt_thread_ioprio @@ -503,7 +537,7 @@ Date: July 2021 Contact: "Daeho Jeong" <daehojeong@google.com> Description: Show how many segments have been reclaimed by GC during a specific GC mode (0: GC normal, 1: GC idle CB, 2: GC idle greedy, - 3: GC idle AT, 4: GC urgent high, 5: GC urgent low) + 3: GC idle AT, 4: GC urgent high, 5: GC urgent low 6: GC urgent mid) You can re-initialize this value to "0". What: /sys/fs/f2fs/<disk>/gc_segment_mode @@ -540,3 +574,9 @@ Contact: "Daeho Jeong" <daehojeong@google.com> Description: You can set the trial count limit for GC urgent high mode with this value. If GC thread gets to the limit, the mode will turn back to GC normal mode. By default, the value is zero, which means there is no limit like before. + +What: /sys/fs/f2fs/<disk>/max_roll_forward_node_blocks +Date: January 2022 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: Controls max # of node block writes to be used for roll forward + recovery. This can limit the roll forward recovery time. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon new file mode 100644 index 000000000000..9e282065cbcf --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon @@ -0,0 +1,274 @@ +what: /sys/kernel/mm/damon/ +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Interface for Data Access MONitoring (DAMON). Contains files + for controlling DAMON. For more details on DAMON itself, + please refer to Documentation/admin-guide/mm/damon/index.rst. + +What: /sys/kernel/mm/damon/admin/ +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Interface for privileged users of DAMON. Contains files for + controlling DAMON that aimed to be used by privileged users. + +What: /sys/kernel/mm/damon/admin/kdamonds/nr_kdamonds +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a number 'N' to this file creates the number of + directories for controlling each DAMON worker thread (kdamond) + named '0' to 'N-1' under the kdamonds/ directory. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/state +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing 'on' or 'off' to this file makes the kdamond starts or + stops, respectively. Reading the file returns the keywords + based on the current status. Writing 'update_schemes_stats' to + the file updates contents of schemes stats files of the + kdamond. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/pid +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading this file returns the pid of the kdamond if it is + running. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/nr_contexts +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a number 'N' to this file creates the number of + directories for controlling each DAMON context named '0' to + 'N-1' under the contexts/ directory. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/operations +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a keyword for a monitoring operations set ('vaddr' for + virtual address spaces monitoring, and 'paddr' for the physical + address space monitoring) to this file makes the context to use + the operations set. Reading the file returns the keyword for + the operations set the context is set to use. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/sample_us +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a value to this file sets the sampling interval of the + DAMON context in microseconds as the value. Reading this file + returns the value. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/aggr_us +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a value to this file sets the aggregation interval of + the DAMON context in microseconds as the value. Reading this + file returns the value. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/update_us +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a value to this file sets the update interval of the + DAMON context in microseconds as the value. Reading this file + returns the value. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/nr_regions/min + +WDate: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a value to this file sets the minimum number of + monitoring regions of the DAMON context as the value. Reading + this file returns the value. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/nr_regions/max +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a value to this file sets the maximum number of + monitoring regions of the DAMON context as the value. Reading + this file returns the value. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/nr_targets +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a number 'N' to this file creates the number of + directories for controlling each DAMON target of the context + named '0' to 'N-1' under the contexts/ directory. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/pid_target +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the pid of + the target process if the context is for virtual address spaces + monitoring, respectively. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/regions/nr_regions +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a number 'N' to this file creates the number of + directories for setting each DAMON target memory region of the + context named '0' to 'N-1' under the regions/ directory. In + case of the virtual address space monitoring, DAMON + automatically sets the target memory region based on the target + processes' mappings. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/regions/<R>/start +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the start + address of the monitoring region. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/regions/<R>/end +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the end + address of the monitoring region. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/nr_schemes +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a number 'N' to this file creates the number of + directories for controlling each DAMON-based operation scheme + of the context named '0' to 'N-1' under the schemes/ directory. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/action +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the action + of the scheme. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/sz/min +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the mimimum + size of the scheme's target regions in bytes. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/sz/max +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the maximum + size of the scheme's target regions in bytes. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/nr_accesses/min +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the manimum + 'nr_accesses' of the scheme's target regions. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/nr_accesses/max +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the maximum + 'nr_accesses' of the scheme's target regions. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/age/min +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the minimum + 'age' of the scheme's target regions. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/age/max +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the maximum + 'age' of the scheme's target regions. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/ms +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the time + quota of the scheme in milliseconds. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/bytes +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the size + quota of the scheme in bytes. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/reset_interval_ms +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the quotas + charge reset interval of the scheme in milliseconds. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/sz_permil +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the + under-quota limit regions prioritization weight for 'size' in + permil. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/nr_accesses_permil +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the + under-quota limit regions prioritization weight for + 'nr_accesses' in permil. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/age_permil +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the + under-quota limit regions prioritization weight for 'age' in + permil. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/metric +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the metric + of the watermarks for the scheme. The writable/readable + keywords for this file are 'none' for disabling the watermarks + feature, or 'free_mem_rate' for the system's global free memory + rate in permil. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/interval_us +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the metric + check interval of the watermarks for the scheme in + microseconds. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/high +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the high + watermark of the scheme in permil. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/mid +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the mid + watermark of the scheme in permil. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/low +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the low + watermark of the scheme in permil. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/nr_tried +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading this file returns the number of regions that the action + of the scheme has tried to be applied. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/sz_tried +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading this file returns the total size of regions that the + action of the scheme has tried to be applied in bytes. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/nr_applied +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading this file returns the number of regions that the action + of the scheme has successfully applied. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/sz_applied +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading this file returns the total size of regions that the + action of the scheme has successfully applied in bytes. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/qt_exceeds +Date: Mar 2022 +Contact: SeongJae Park <sj@kernel.org> +Description: Reading this file returns the number of the exceed events of + the scheme's quotas. diff --git a/Documentation/ABI/testing/sysfs-mce b/Documentation/ABI/testing/sysfs-mce index c8cd989034b4..83172f50e27c 100644 --- a/Documentation/ABI/testing/sysfs-mce +++ b/Documentation/ABI/testing/sysfs-mce @@ -53,38 +53,6 @@ Description: (but some corrected errors might be still reported in other ways) -What: /sys/devices/system/machinecheck/machinecheckX/tolerant -Contact: Andi Kleen <ak@linux.intel.com> -Date: Feb, 2007 -Description: - The entries appear for each CPU, but they are truly shared - between all CPUs. - - Tolerance level. When a machine check exception occurs for a - non corrected machine check the kernel can take different - actions. - - Since machine check exceptions can happen any time it is - sometimes risky for the kernel to kill a process because it - defies normal kernel locking rules. The tolerance level - configures how hard the kernel tries to recover even at some - risk of deadlock. Higher tolerant values trade potentially - better uptime with the risk of a crash or even corruption - (for tolerant >= 3). - - == =========================================================== - 0 always panic on uncorrected errors, log corrected errors - 1 panic or SIGBUS on uncorrected errors, log corrected errors - 2 SIGBUS or log uncorrected errors, log corrected errors - 3 never panic or SIGBUS, log all errors (for testing only) - == =========================================================== - - Default: 1 - - Note this only makes a difference if the CPU allows recovery - from a machine check exception. Current x86 CPUs generally - do not. - What: /sys/devices/system/machinecheck/machinecheckX/trigger Contact: Andi Kleen <ak@linux.intel.com> Date: Feb, 2007 diff --git a/Documentation/ABI/testing/sysfs-platform-lg-laptop b/Documentation/ABI/testing/sysfs-platform-lg-laptop index cf47749b19df..0570cd524d0e 100644 --- a/Documentation/ABI/testing/sysfs-platform-lg-laptop +++ b/Documentation/ABI/testing/sysfs-platform-lg-laptop @@ -17,6 +17,7 @@ Date: October 2018 KernelVersion: 4.20 Contact: "Matan Ziv-Av <matan@svgalib.org> Description: + Deprecated use /sys/class/power_supply/CMB0/charge_control_end_threshold Maximal battery charge level. Accepted values are 80 or 100. What: /sys/devices/platform/lg-laptop/fan_mode diff --git a/Documentation/ABI/testing/sysfs-timecard b/Documentation/ABI/testing/sysfs-timecard index 97f6773794a5..220478156297 100644 --- a/Documentation/ABI/testing/sysfs-timecard +++ b/Documentation/ABI/testing/sysfs-timecard @@ -37,8 +37,15 @@ Description: (RO) Set of available destinations (sinks) for a SMA PPS2 signal is sent to the PPS2 selector TS1 signal is sent to timestamper 1 TS2 signal is sent to timestamper 2 + TS3 signal is sent to timestamper 3 + TS4 signal is sent to timestamper 4 IRIG signal is sent to the IRIG-B module DCF signal is sent to the DCF module + FREQ1 signal is sent to frequency counter 1 + FREQ2 signal is sent to frequency counter 2 + FREQ3 signal is sent to frequency counter 3 + FREQ4 signal is sent to frequency counter 4 + None signal input is disabled ===== ================================================ What: /sys/class/timecard/ocpN/available_sma_outputs @@ -50,10 +57,16 @@ Description: (RO) Set of available sources for a SMA output signal. 10Mhz output is from the 10Mhz reference clock PHC output PPS is from the PHC clock MAC output PPS is from the Miniature Atomic Clock - GNSS output PPS is from the GNSS module + GNSS1 output PPS is from the first GNSS module GNSS2 output PPS is from the second GNSS module IRIG output is from the PHC, in IRIG-B format DCF output is from the PHC, in DCF format + GEN1 output is from frequency generator 1 + GEN2 output is from frequency generator 2 + GEN3 output is from frequency generator 3 + GEN4 output is from frequency generator 4 + GND output is GND + VCC output is VCC ===== ================================================ What: /sys/class/timecard/ocpN/clock_source @@ -63,6 +76,97 @@ Description: (RW) Contains the current synchronization source used by the PHC. May be changed by writing one of the listed values from the available_clock_sources attribute set. +What: /sys/class/timecard/ocpN/clock_status_drift +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Contains the current drift value used by the firmware + for internal disciplining of the atomic clock. + +What: /sys/class/timecard/ocpN/clock_status_offset +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Contains the current offset value used by the firmware + for internal disciplining of the atomic clock. + +What: /sys/class/timecard/ocpN/freqX +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Optional directory containing the sysfs nodes for + frequency counter <X>. + +What: /sys/class/timecard/ocpN/freqX/frequency +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Contains the measured frequency over the specified + measurement period. + +What: /sys/class/timecard/ocpN/freqX/seconds +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RW) Specifies the number of seconds from 0-255 that the + frequency should be measured over. Write 0 to disable. + +What: /sys/class/timecard/ocpN/genX +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Optional directory containing the sysfs nodes for + frequency generator <X>. + +What: /sys/class/timecard/ocpN/genX/duty +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Specifies the signal duty cycle as a percentage from 1-99. + +What: /sys/class/timecard/ocpN/genX/period +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Specifies the signal period in nanoseconds. + +What: /sys/class/timecard/ocpN/genX/phase +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Specifies the signal phase offset in nanoseconds. + +What: /sys/class/timecard/ocpN/genX/polarity +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Specifies the signal polarity, either 1 or 0. + +What: /sys/class/timecard/ocpN/genX/running +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Either 0 or 1, showing if the signal generator is running. + +What: /sys/class/timecard/ocpN/genX/start +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RO) Shows the time in <sec>.<nsec> that the signal generator + started running. + +What: /sys/class/timecard/ocpN/genX/signal +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RW) Used to start the signal generator, and summarize + the current status. + + The signal generator may be started by writing the signal + period, followed by the optional signal values. If the + optional values are not provided, they default to the current + settings, which may be obtained from the other sysfs nodes. + + period [duty [phase [polarity]]] + + echo 500000000 > signal # 1/2 second period + echo 1000000 40 100 > signal + echo 0 > signal # turn off generator + + Period and phase are specified in nanoseconds. Duty cycle is + a percentage from 1-99. Polarity is 1 or 0. + + Reading this node will return: + + period duty phase polarity start_time + What: /sys/class/timecard/ocpN/gnss_sync Date: September 2021 Contact: Jonathan Lemon <jonathan.lemon@gmail.com> @@ -126,6 +230,16 @@ Description: (RW) These attributes specify the direction of the signal The 10Mhz reference clock input is currently only valid on SMA1 and may not be combined with other destination sinks. +What: /sys/class/timecard/ocpN/tod_correction +Date: March 2022 +Contact: Jonathan Lemon <jonathan.lemon@gmail.com> +Description: (RW) The incoming GNSS signal is in UTC time, and the NMEA + format messages do not provide a TAI offset. This sets the + correction value for the incoming time. + + If UBX_LS is enabled, this should be 0, and the offset is + taken from the UBX-NAV-TIMELS message. + What: /sys/class/timecard/ocpN/ts_window_adjust Date: September 2021 Contact: Jonathan Lemon <jonathan.lemon@gmail.com> |