summaryrefslogtreecommitdiff
path: root/Documentation/arm
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/arm')
-rw-r--r--Documentation/arm/index.rst1
-rw-r--r--Documentation/arm/samsung-s3c24xx/cpufreq.rst77
-rw-r--r--Documentation/arm/samsung-s3c24xx/eb2410itx.rst59
-rw-r--r--Documentation/arm/samsung-s3c24xx/gpio.rst172
-rw-r--r--Documentation/arm/samsung-s3c24xx/h1940.rst41
-rw-r--r--Documentation/arm/samsung-s3c24xx/index.rst20
-rw-r--r--Documentation/arm/samsung-s3c24xx/nand.rst30
-rw-r--r--Documentation/arm/samsung-s3c24xx/overview.rst311
-rw-r--r--Documentation/arm/samsung-s3c24xx/s3c2412.rst121
-rw-r--r--Documentation/arm/samsung-s3c24xx/s3c2413.rst22
-rw-r--r--Documentation/arm/samsung-s3c24xx/smdk2440.rst57
-rw-r--r--Documentation/arm/samsung-s3c24xx/suspend.rst137
-rw-r--r--Documentation/arm/samsung-s3c24xx/usb-host.rst91
-rw-r--r--Documentation/arm/samsung/gpio.rst8
-rw-r--r--Documentation/arm/samsung/overview.rst13
15 files changed, 0 insertions, 1160 deletions
diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst
index 8c636d4a061f..ae42fe886f0d 100644
--- a/Documentation/arm/index.rst
+++ b/Documentation/arm/index.rst
@@ -64,7 +64,6 @@ SoC-specific documents
sunxi
samsung/index
- samsung-s3c24xx/index
sunxi/clocks
diff --git a/Documentation/arm/samsung-s3c24xx/cpufreq.rst b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
deleted file mode 100644
index cd22697cf606..000000000000
--- a/Documentation/arm/samsung-s3c24xx/cpufreq.rst
+++ /dev/null
@@ -1,77 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0-only
-
-=======================
-S3C24XX CPUfreq support
-=======================
-
-Introduction
-------------
-
- The S3C24XX series support a number of power saving systems, such as
- the ability to change the core, memory and peripheral operating
- frequencies. The core control is exported via the CPUFreq driver
- which has a number of different manual or automatic controls over the
- rate the core is running at.
-
- There are two forms of the driver depending on the specific CPU and
- how the clocks are arranged. The first implementation used as single
- PLL to feed the ARM, memory and peripherals via a series of dividers
- and muxes and this is the implementation that is documented here. A
- newer version where there is a separate PLL and clock divider for the
- ARM core is available as a separate driver.
-
-
-Layout
-------
-
- The code core manages the CPU specific drivers, any data that they
- need to register and the interface to the generic drivers/cpufreq
- system. Each CPU registers a driver to control the PLL, clock dividers
- and anything else associated with it. Any board that wants to use this
- framework needs to supply at least basic details of what is required.
-
- The core registers with drivers/cpufreq at init time if all the data
- necessary has been supplied.
-
-
-CPU support
------------
-
- The support for each CPU depends on the facilities provided by the
- SoC and the driver as each device has different PLL and clock chains
- associated with it.
-
-
-Slow Mode
----------
-
- The SLOW mode where the PLL is turned off altogether and the
- system is fed by the external crystal input is currently not
- supported.
-
-
-sysfs
------
-
- The core code exports extra information via sysfs in the directory
- devices/system/cpu/cpu0/arch-freq.
-
-
-Board Support
--------------
-
- Each board that wants to use the cpufreq code must register some basic
- information with the core driver to provide information about what the
- board requires and any restrictions being placed on it.
-
- The board needs to supply information about whether it needs the IO bank
- timings changing, any maximum frequency limits and information about the
- SDRAM refresh rate.
-
-
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2009 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
deleted file mode 100644
index 7863c93652f8..000000000000
--- a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-===================================
-Simtec Electronics EB2410ITX (BAST)
-===================================
-
- http://www.simtec.co.uk/products/EB2410ITX/
-
-Introduction
-------------
-
- The EB2410ITX is a S3C2410 based development board with a variety of
- peripherals and expansion connectors. This board is also known by
- the shortened name of Bast.
-
-
-Configuration
--------------
-
- To set the default configuration, use `make bast_defconfig` which
- supports the commonly used features of this board.
-
-
-Support
--------
-
- Official support information can be found on the Simtec Electronics
- website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
-
- Useful links:
-
- - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
-
- - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
-
- - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
- and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
-
-
-MTD
----
-
- The NAND and NOR support has been merged from the linux-mtd project.
- Any problems, see http://www.linux-mtd.infradead.org/ for more
- information or up-to-date versions of linux-mtd.
-
-
-IDE
----
-
- Both onboard IDE ports are supported, however there is no support for
- changing speed of devices, PIO Mode 4 capable drives should be used.
-
-
-Maintainers
------------
-
- This board is maintained by Simtec Electronics.
-
-
-Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst
deleted file mode 100644
index f4a8c800a457..000000000000
--- a/Documentation/arm/samsung-s3c24xx/gpio.rst
+++ /dev/null
@@ -1,172 +0,0 @@
-====================
-S3C24XX GPIO Control
-====================
-
-Introduction
-------------
-
- The s3c2410 kernel provides an interface to configure and
- manipulate the state of the GPIO pins, and find out other
- information about them.
-
- There are a number of conditions attached to the configuration
- of the s3c2410 GPIO system, please read the Samsung provided
- data-sheet/users manual to find out the complete list.
-
- See Documentation/arm/samsung/gpio.rst for the core implementation.
-
-
-GPIOLIB
--------
-
- With the event of the GPIOLIB in drivers/gpio, support for some
- of the GPIO functions such as reading and writing a pin will
- be removed in favour of this common access method.
-
- Once all the extant drivers have been converted, the functions
- listed below will be removed (they may be marked as __deprecated
- in the near future).
-
- The following functions now either have a `s3c_` specific variant
- or are merged into gpiolib. See the definitions in
- arch/arm/mach-s3c/gpio-cfg.h:
-
- - s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output()
- - s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input()
- - s3c2410_gpio_getirq() gpio_to_irq()
- - s3c2410_gpio_cfgpin() s3c_gpio_cfgpin()
- - s3c2410_gpio_getcfg() s3c_gpio_getcfg()
- - s3c2410_gpio_pullup() s3c_gpio_setpull()
-
-
-GPIOLIB conversion
-------------------
-
-If you need to convert your board or driver to use gpiolib from the phased
-out s3c2410 API, then here are some notes on the process.
-
-1) If your board is exclusively using an GPIO, say to control peripheral
- power, then it will require to claim the gpio with gpio_request() before
- it can use it.
-
- It is recommended to check the return value, with at least WARN_ON()
- during initialisation.
-
-2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
- as they have the same arguments, and can either take the pin specific
- values, or the more generic special-function-number arguments.
-
-3) s3c2410_gpio_pullup() changes have the problem that while the
- s3c2410_gpio_pullup(x, 1) can be easily translated to the
- s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
- are not so easy.
-
- The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
- of some of the devices, a pull-down) and as such the new API distinguishes
- between the UP and DOWN case. There is currently no 'just turn on' setting
- which may be required if this becomes a problem.
-
-4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
- does not implicitly configure the relevant gpio to output. The gpio
- direction should be changed before using gpio_set_value().
-
-5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
- has been set to input. It is currently unknown what the behaviour is
- when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
- would return the value the pin is supposed to be outputting).
-
-6) s3c2410_gpio_getirq() should be directly replaceable with the
- gpio_to_irq() call.
-
-The s3c2410_gpio and `gpio_` calls have always operated on the same gpio
-numberspace, so there is no problem with converting the gpio numbering
-between the calls.
-
-
-Headers
--------
-
- See arch/arm/mach-s3c/regs-gpio-s3c24xx.h for the list
- of GPIO pins, and the configuration values for them. This
- is included by using #include <mach/regs-gpio.h>
-
-
-PIN Numbers
------------
-
- Each pin has an unique number associated with it in regs-gpio.h,
- e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
- the GPIO functions which pin is to be used.
-
- With the conversion to gpiolib, there is no longer a direct conversion
- from gpio pin number to register base address as in earlier kernels. This
- is due to the number space required for newer SoCs where the later
- GPIOs are not contiguous.
-
-
-Configuring a pin
------------------
-
- The following function allows the configuration of a given pin to
- be changed.
-
- void s3c_gpio_cfgpin(unsigned int pin, unsigned int function);
-
- e.g.:
-
- s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1));
- s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2));
-
- which would turn GPA(0) into the lowest Address line A0, and set
- GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
-
-
-Reading the current configuration
----------------------------------
-
- The current configuration of a pin can be read by using standard
- gpiolib function:
-
- s3c_gpio_getcfg(unsigned int pin);
-
- The return value will be from the same set of values which can be
- passed to s3c_gpio_cfgpin().
-
-
-Configuring a pull-up resistor
-------------------------------
-
- A large proportion of the GPIO pins on the S3C2410 can have weak
- pull-up resistors enabled. This can be configured by the following
- function:
-
- void s3c_gpio_setpull(unsigned int pin, unsigned int to);
-
- Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off,
- and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other
- values are currently undefined.
-
-
-Getting and setting the state of a PIN
---------------------------------------
-
- These calls are now implemented by the relevant gpiolib calls, convert
- your board or driver to use gpiolib.
-
-
-Getting the IRQ number associated with a PIN
---------------------------------------------
-
- A standard gpiolib function can map the given pin number to an IRQ
- number to pass to the IRQ system.
-
- int gpio_to_irq(unsigned int pin);
-
- Note, not all pins have an IRQ.
-
-
-Author
--------
-
-Ben Dooks, 03 October 2004
-Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/h1940.rst b/Documentation/arm/samsung-s3c24xx/h1940.rst
deleted file mode 100644
index 62a562c178e3..000000000000
--- a/Documentation/arm/samsung-s3c24xx/h1940.rst
+++ /dev/null
@@ -1,41 +0,0 @@
-=============
-HP IPAQ H1940
-=============
-
-http://www.handhelds.org/projects/h1940.html
-
-Introduction
-------------
-
- The HP H1940 is a S3C2410 based handheld device, with
- bluetooth connectivity.
-
-
-Support
--------
-
- A variety of information is available
-
- handhelds.org project page:
-
- http://www.handhelds.org/projects/h1940.html
-
- handhelds.org wiki page:
-
- http://handhelds.org/moin/moin.cgi/HpIpaqH1940
-
- Herbert Pötzl pages:
-
- http://vserver.13thfloor.at/H1940/
-
-
-Maintainers
------------
-
- This project is being maintained and developed by a variety
- of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl.
-
- Thanks to the many others who have also provided support.
-
-
-(c) 2005 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/index.rst b/Documentation/arm/samsung-s3c24xx/index.rst
deleted file mode 100644
index ccb951a0bedb..000000000000
--- a/Documentation/arm/samsung-s3c24xx/index.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-==========================
-Samsung S3C24XX SoC Family
-==========================
-
-.. toctree::
- :maxdepth: 1
-
- h1940
- gpio
- cpufreq
- suspend
- usb-host
- s3c2412
- eb2410itx
- nand
- smdk2440
- s3c2413
- overview
diff --git a/Documentation/arm/samsung-s3c24xx/nand.rst b/Documentation/arm/samsung-s3c24xx/nand.rst
deleted file mode 100644
index 938995694ee7..000000000000
--- a/Documentation/arm/samsung-s3c24xx/nand.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-====================
-S3C24XX NAND Support
-====================
-
-Introduction
-------------
-
-Small Page NAND
----------------
-
-The driver uses a 512 byte (1 page) ECC code for this setup. The
-ECC code is not directly compatible with the default kernel ECC
-code, so the driver enforces its own OOB layout and ECC parameters
-
-Large Page NAND
----------------
-
-The driver is capable of handling NAND flash with a 2KiB page
-size, with support for hardware ECC generation and correction.
-
-Unlike the 512byte page mode, the driver generates ECC data for
-each 256 byte block in an 2KiB page. This means that more than
-one error in a page can be rectified. It also means that the
-OOB layout remains the default kernel layout for these flashes.
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2007 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst
deleted file mode 100644
index 14535e5cffb7..000000000000
--- a/Documentation/arm/samsung-s3c24xx/overview.rst
+++ /dev/null
@@ -1,311 +0,0 @@
-==========================
-S3C24XX ARM Linux Overview
-==========================
-
-
-
-Introduction
-------------
-
- The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
- by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
- S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices
- are supported.
-
- Support for the S3C2400 and S3C24A0 series was never completed and the
- corresponding code has been removed after a while. If someone wishes to
- revive this effort, partial support can be retrieved from earlier Linux
- versions.
-
- The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
- included under the arch/arm/mach-s3c directory. Note, while core
- support for these SoCs is in, work on some of the extra peripherals
- and extra interrupts is still ongoing.
-
-
-Configuration
--------------
-
- A generic S3C2410 configuration is provided, and can be used as the
- default by `make s3c2410_defconfig`. This configuration has support
- for all the machines, and the commonly used features on them.
-
- Certain machines may have their own default configurations as well,
- please check the machine specific documentation.
-
-
-Layout
-------
-
- The core support files, register, kernel and paltform data are located in the
- platform code contained in arch/arm/mach-s3c with headers in
- arch/arm/mach-s3c/include
-
-arch/arm/mach-s3c:
-
- Files in here are either common to all the s3c24xx family,
- or are common to only some of them with names to indicate this
- status. The files that are not common to all are generally named
- with the initial cpu they support in the series to ensure a short
- name without any possibility of confusion with newer devices.
-
- As an example, initially s3c244x would cover s3c2440 and s3c2442, but
- with the s3c2443 which does not share many of the same drivers in
- this directory, the name becomes invalid. We stick to s3c2440-<x>
- to indicate a driver that is s3c2440 and s3c2442 compatible.
-
- This does mean that to find the status of any given SoC, a number
- of directories may need to be searched.
-
-
-Machines
---------
-
- The currently supported machines are as follows:
-
- Simtec Electronics EB2410ITX (BAST)
-
- A general purpose development board, see EB2410ITX.txt for further
- details
-
- Simtec Electronics IM2440D20 (Osiris)
-
- CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash
- and a PCMCIA controller.
-
- Samsung SMDK2410
-
- Samsung's own development board, geared for PDA work.
-
- Samsung/Aiji SMDK2412
-
- The S3C2412 version of the SMDK2440.
-
- Samsung/Aiji SMDK2413
-
- The S3C2412 version of the SMDK2440.
-
- Samsung/Meritech SMDK2440
-
- The S3C2440 compatible version of the SMDK2440, which has the
- option of an S3C2440 or S3C2442 CPU module.
-
- Thorcom VR1000
-
- Custom embedded board
-
- HP IPAQ 1940
-
- Handheld (IPAQ), available in several varieties
-
- HP iPAQ rx3715
-
- S3C2440 based IPAQ, with a number of variations depending on
- features shipped.
-
- Acer N30
-
- A S3C2410 based PDA from Acer. There is a Wiki page at
- http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
-
- AML M5900
-
- American Microsystems' M5900
-
- Nex Vision Nexcoder
- Nex Vision Otom
-
- Two machines by Nex Vision
-
-
-Adding New Machines
--------------------
-
- The architecture has been designed to support as many machines as can
- be configured for it in one kernel build, and any future additions
- should keep this in mind before altering items outside of their own
- machine files.
-
- Machine definitions should be kept in arch/arm/mach-s3c,
- and there are a number of examples that can be looked at.
-
- Read the kernel patch submission policies as well as the
- Documentation/arm directory before submitting patches. The
- ARM kernel series is managed by Russell King, and has a patch system
- located at http://www.arm.linux.org.uk/developer/patches/
- as well as mailing lists that can be found from the same site.
-
- As a courtesy, please notify <ben-linux@fluff.org> of any new
- machines or other modifications.
-
- Any large scale modifications, or new drivers should be discussed
- on the ARM kernel mailing list (linux-arm-kernel) before being
- attempted. See http://www.arm.linux.org.uk/mailinglists/ for the
- mailing list information.
-
-
-I2C
----
-
- The hardware I2C core in the CPU is supported in single master
- mode, and can be configured via platform data.
-
-
-RTC
----
-
- Support for the onboard RTC unit, including alarm function.
-
- This has recently been upgraded to use the new RTC core,
- and the module has been renamed to rtc-s3c to fit in with
- the new rtc naming scheme.
-
-
-Watchdog
---------
-
- The onchip watchdog is available via the standard watchdog
- interface.
-
-
-NAND
-----
-
- The current kernels now have support for the s3c2410 NAND
- controller. If there are any problems the latest linux-mtd
- code can be found from http://www.linux-mtd.infradead.org/
-
- For more information see Documentation/arm/samsung-s3c24xx/nand.rst
-
-
-SD/MMC
-------
-
- The SD/MMC hardware pre S3C2443 is supported in the current
- kernel, the driver is drivers/mmc/host/s3cmci.c and supports
- 1 and 4 bit SD or MMC cards.
-
- The SDIO behaviour of this driver has not been fully tested. There is no
- current support for hardware SDIO interrupts.
-
-
-Serial
-------
-
- The s3c2410 serial driver provides support for the internal
- serial ports. These devices appear as /dev/ttySAC0 through 3.
-
- To create device nodes for these, use the following commands
-
- mknod ttySAC0 c 204 64
- mknod ttySAC1 c 204 65
- mknod ttySAC2 c 204 66
-
-
-GPIO
-----
-
- The core contains support for manipulating the GPIO, see the
- documentation in GPIO.txt in the same directory as this file.
-
- Newer kernels carry GPIOLIB, and support is being moved towards
- this with some of the older support in line to be removed.
-
- As of v2.6.34, the move towards using gpiolib support is almost
- complete, and very little of the old calls are left.
-
- See Documentation/arm/samsung-s3c24xx/gpio.rst for the S3C24XX specific
- support and Documentation/arm/samsung/gpio.rst for the core Samsung
- implementation.
-
-
-Clock Management
-----------------
-
- The core provides the interface defined in the header file
- include/asm-arm/hardware/clock.h, to allow control over the
- various clock units
-
-
-Suspend to RAM
---------------
-
- For boards that provide support for suspend to RAM, the
- system can be placed into low power suspend.
-
- See Suspend.txt for more information.
-
-
-SPI
----
-
- SPI drivers are available for both the in-built hardware
- (although there is no DMA support yet) and a generic
- GPIO based solution.
-
-
-LEDs
-----
-
- There is support for GPIO based LEDs via a platform driver
- in the LED subsystem.
-
-
-Platform Data
--------------
-
- Whenever a device has platform specific data that is specified
- on a per-machine basis, care should be taken to ensure the
- following:
-
- 1) that default data is not left in the device to confuse the
- driver if a machine does not set it at startup
-
- 2) the data should (if possible) be marked as __initdata,
- to ensure that the data is thrown away if the machine is
- not the one currently in use.
-
- The best way of doing this is to make a function that
- kmalloc()s an area of memory, and copies the __initdata
- and then sets the relevant device's platform data. Making
- the function `__init` takes care of ensuring it is discarded
- with the rest of the initialisation code::
-
- static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
- {
- struct s3c2410_xxx_mach_info *npd;
-
- npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
- if (npd) {
- memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
- s3c_device_xxx.dev.platform_data = npd;
- } else {
- printk(KERN_ERR "no memory for xxx platform data\n");
- }
- }
-
- Note, since the code is marked as __init, it should not be
- exported outside arch/arm/mach-s3c/, or exported to
- modules via EXPORT_SYMBOL() and related functions.
-
-
-Port Contributors
------------------
-
- Ben Dooks (BJD)
- Vincent Sanders
- Herbert Potzl
- Arnaud Patard (RTP)
- Roc Wu
- Klaus Fetscher
- Dimitry Andric
- Shannon Holland
- Guillaume Gourat (NexVision)
- Christer Weinigel (wingel) (Acer N30)
- Lucas Correia Villa Real (S3C2400 port)
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2004-2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2412.rst b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
deleted file mode 100644
index 68b985fc6bf4..000000000000
--- a/Documentation/arm/samsung-s3c24xx/s3c2412.rst
+++ /dev/null
@@ -1,121 +0,0 @@
-==========================
-S3C2412 ARM Linux Overview
-==========================
-
-Introduction
-------------
-
- The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs
- from Samsung. This part has an ARM926-EJS core, capable of running up
- to 266MHz (see data-sheet for more information)
-
-
-Clock
------
-
- The core clock code provides a set of clocks to the drivers, and allows
- for source selection and a number of other features.
-
-
-Power
------
-
- No support for suspend/resume to RAM in the current system.
-
-
-DMA
----
-
- No current support for DMA.
-
-
-GPIO
-----
-
- There is support for setting the GPIO to input/output/special function
- and reading or writing to them.
-
-
-UART
-----
-
- The UART hardware is similar to the S3C2440, and is supported by the
- s3c2410 driver in the drivers/serial directory.
-
-
-NAND
-----
-
- The NAND hardware is similar to the S3C2440, and is supported by the
- s3c2410 driver in the drivers/mtd/nand/raw directory.
-
-
-USB Host
---------
-
- The USB hardware is similar to the S3C2410, with extended clock source
- control. The OHCI portion is supported by the ohci-s3c2410 driver, and
- the clock control selection is supported by the core clock code.
-
-
-USB Device
-----------
-
- No current support in the kernel
-
-
-IRQs
-----
-
- All the standard, and external interrupt sources are supported. The
- extra sub-sources are not yet supported.
-
-
-RTC
----
-
- The RTC hardware is similar to the S3C2410, and is supported by the
- s3c2410-rtc driver.
-
-
-Watchdog
---------
-
- The watchdog hardware is the same as the S3C2410, and is supported by
- the s3c2410_wdt driver.
-
-
-MMC/SD/SDIO
------------
-
- No current support for the MMC/SD/SDIO block.
-
-IIC
----
-
- The IIC hardware is the same as the S3C2410, and is supported by the
- i2c-s3c24xx driver.
-
-
-IIS
----
-
- No current support for the IIS interface.
-
-
-SPI
----
-
- No current support for the SPI interfaces.
-
-
-ATA
----
-
- No current support for the on-board ATA block.
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2413.rst b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
deleted file mode 100644
index 1f51e207fc46..000000000000
--- a/Documentation/arm/samsung-s3c24xx/s3c2413.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-==========================
-S3C2413 ARM Linux Overview
-==========================
-
-Introduction
-------------
-
- The S3C2413 is an extended version of the S3C2412, with an camera
- interface and mobile DDR memory support. See the S3C2412 support
- documentation for more information.
-
-
-Camera Interface
-----------------
-
- This block is currently not supported.
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/smdk2440.rst b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
deleted file mode 100644
index 524fd0b4afaf..000000000000
--- a/Documentation/arm/samsung-s3c24xx/smdk2440.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-=========================
-Samsung/Meritech SMDK2440
-=========================
-
-Introduction
-------------
-
- The SMDK2440 is a two part evaluation board for the Samsung S3C2440
- processor. It includes support for LCD, SmartMedia, Audio, SD and
- 10MBit Ethernet, and expansion headers for various signals, including
- the camera and unused GPIO.
-
-
-Configuration
--------------
-
- To set the default configuration, use `make smdk2440_defconfig` which
- will configure the common features of this board, or use
- `make s3c2410_config` to include support for all s3c2410/s3c2440 machines
-
-
-Support
--------
-
- Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which
- includes linux based USB download tools.
-
- Some of the h1940 patches that can be found from the H1940 project
- site at http://www.handhelds.org/projects/h1940.html can also be
- applied to this board.
-
-
-Peripherals
------------
-
- There is no current support for any of the extra peripherals on the
- base-board itself.
-
-
-MTD
----
-
- The NAND flash should be supported by the in kernel MTD NAND support,
- NOR flash will be added later.
-
-
-Maintainers
------------
-
- This board is being maintained by Ben Dooks, for more info, see
- http://www.fluff.org/ben/smdk2440/
-
- Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440,
- and to Simtec Electronics for allowing me time to work on this.
-
-
-(c) 2004 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/suspend.rst b/Documentation/arm/samsung-s3c24xx/suspend.rst
deleted file mode 100644
index b4f3ae9fe76e..000000000000
--- a/Documentation/arm/samsung-s3c24xx/suspend.rst
+++ /dev/null
@@ -1,137 +0,0 @@
-=======================
-S3C24XX Suspend Support
-=======================
-
-
-Introduction
-------------
-
- The S3C24XX supports a low-power suspend mode, where the SDRAM is kept
- in Self-Refresh mode, and all but the essential peripheral blocks are
- powered down. For more information on how this works, please look
- at the relevant CPU datasheet from Samsung.
-
-
-Requirements
-------------
-
- 1) A bootloader that can support the necessary resume operation
-
- 2) Support for at least 1 source for resume
-
- 3) CONFIG_PM enabled in the kernel
-
- 4) Any peripherals that are going to be powered down at the same
- time require suspend/resume support.
-
-
-Resuming
---------
-
- The S3C2410 user manual defines the process of sending the CPU to
- sleep and how it resumes. The default behaviour of the Linux code
- is to set the GSTATUS3 register to the physical address of the
- code to resume Linux operation.
-
- GSTATUS4 is currently left alone by the sleep code, and is free to
- use for any other purposes (for example, the EB2410ITX uses this to
- save memory configuration in).
-
-
-Machine Support
----------------
-
- The machine specific functions must call the s3c_pm_init() function
- to say that its bootloader is capable of resuming. This can be as
- simple as adding the following to the machine's definition:
-
- INITMACHINE(s3c_pm_init)
-
- A board can do its own setup before calling s3c_pm_init, if it
- needs to setup anything else for power management support.
-
- There is currently no support for over-riding the default method of
- saving the resume address, if your board requires it, then contact
- the maintainer and discuss what is required.
-
- Note, the original method of adding an late_initcall() is wrong,
- and will end up initialising all compiled machines' pm init!
-
- The following is an example of code used for testing wakeup from
- an falling edge on IRQ_EINT0::
-
-
- static irqreturn_t button_irq(int irq, void *pw)
- {
- return IRQ_HANDLED;
- }
-
- statuc void __init machine_init(void)
- {
- ...
-
- request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING,
- "button-irq-eint0", NULL);
-
- enable_irq_wake(IRQ_EINT0);
-
- s3c_pm_init();
- }
-
-
-Debugging
----------
-
- There are several important things to remember when using PM suspend:
-
- 1) The uart drivers will disable the clocks to the UART blocks when
- suspending, which means that use of printascii() or similar direct
- access to the UARTs will cause the debug to stop.
-
- 2) While the pm code itself will attempt to re-enable the UART clocks,
- care should be taken that any external clock sources that the UARTs
- rely on are still enabled at that point.
-
- 3) If any debugging is placed in the resume path, then it must have the
- relevant clocks and peripherals setup before use (ie, bootloader).
-
- For example, if you transmit a character from the UART, the baud
- rate and uart controls must be setup beforehand.
-
-
-Configuration
--------------
-
- The S3C2410 specific configuration in `System Type` defines various
- aspects of how the S3C2410 suspend and resume support is configured
-
- `S3C2410 PM Suspend debug`
-
- This option prints messages to the serial console before and after
- the actual suspend, giving detailed information on what is
- happening
-
-
- `S3C2410 PM Suspend Memory CRC`
-
- Allows the entire memory to be checksummed before and after the
- suspend to see if there has been any corruption of the contents.
-
- Note, the time to calculate the CRC is dependent on the CPU speed
- and the size of memory. For an 64Mbyte RAM area on an 200MHz
- S3C2410, this can take approximately 4 seconds to complete.
-
- This support requires the CRC32 function to be enabled.
-
-
- `S3C2410 PM Suspend CRC Chunksize (KiB)`
-
- Defines the size of memory each CRC chunk covers. A smaller value
- will mean that the CRC data block will take more memory, but will
- identify any faults with better precision
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2004 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst
deleted file mode 100644
index 7aaffac89e04..000000000000
--- a/Documentation/arm/samsung-s3c24xx/usb-host.rst
+++ /dev/null
@@ -1,91 +0,0 @@
-========================
-S3C24XX USB Host support
-========================
-
-
-
-Introduction
-------------
-
- This document details the S3C2410/S3C2440 in-built OHCI USB host support.
-
-Configuration
--------------
-
- Enable at least the following kernel options:
-
- menuconfig::
-
- Device Drivers --->
- USB support --->
- <*> Support for Host-side USB
- <*> OHCI HCD support
-
-
- .config:
-
- - CONFIG_USB
- - CONFIG_USB_OHCI_HCD
-
-
- Once these options are configured, the standard set of USB device
- drivers can be configured and used.
-
-
-Board Support
--------------
-
- The driver attaches to a platform device, which will need to be
- added by the board specific support file in arch/arm/mach-s3c,
- such as mach-bast.c or mach-smdk2410.c
-
- The platform device's platform_data field is only needed if the
- board implements extra power control or over-current monitoring.
-
- The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
- register, so if both ports are to be used for the host, then it is
- the board support file's responsibility to ensure that the second
- port is configured to be connected to the OHCI core.
-
-
-Platform Data
--------------
-
- See include/linux/platform_data/usb-ohci-s3c2410.h for the
- descriptions of the platform device data. An implementation
- can be found in arch/arm/mach-s3c/simtec-usb.c .
-
- The `struct s3c2410_hcd_info` contains a pair of functions
- that get called to enable over-current detection, and to
- control the port power status.
-
- The ports are numbered 0 and 1.
-
- power_control:
- Called to enable or disable the power on the port.
-
- enable_oc:
- Called to enable or disable the over-current monitoring.
- This should claim or release the resources being used to
- check the power condition on the port, such as an IRQ.
-
- report_oc:
- The OHCI driver fills this field in for the over-current code
- to call when there is a change to the over-current state on
- an port. The ports argument is a bitmask of 1 bit per port,
- with bit X being 1 for an over-current on port X.
-
- The function s3c2410_usb_report_oc() has been provided to
- ensure this is called correctly.
-
- port[x]:
- This is struct describes each port, 0 or 1. The platform driver
- should set the flags field of each port to S3C_HCDFLG_USED if
- the port is enabled.
-
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2005 Simtec Electronics
diff --git a/Documentation/arm/samsung/gpio.rst b/Documentation/arm/samsung/gpio.rst
index f6e27b07c993..27fae0d50361 100644
--- a/Documentation/arm/samsung/gpio.rst
+++ b/Documentation/arm/samsung/gpio.rst
@@ -9,14 +9,6 @@ This outlines the Samsung GPIO implementation and the architecture
specific calls provided alongside the drivers/gpio core.
-S3C24XX (Legacy)
-----------------
-
-See Documentation/arm/samsung-s3c24xx/gpio.rst for more information
-about these devices. Their implementation has been brought into line
-with the core samsung implementation described in this document.
-
-
GPIOLIB integration
-------------------
diff --git a/Documentation/arm/samsung/overview.rst b/Documentation/arm/samsung/overview.rst
index e74307897416..8b15a190169b 100644
--- a/Documentation/arm/samsung/overview.rst
+++ b/Documentation/arm/samsung/overview.rst
@@ -12,21 +12,10 @@ Introduction
The currently supported SoCs are:
- - S3C24XX: See Documentation/arm/samsung-s3c24xx/overview.rst for full list
- S3C64XX: S3C6400 and S3C6410
- S5PC110 / S5PV210
-S3C24XX Systems
----------------
-
- There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
- deals with the architecture and drivers specific to these devices.
-
- See Documentation/arm/samsung-s3c24xx/overview.rst for more information
- on the implementation details and specific support.
-
-
Configuration
-------------
@@ -51,8 +40,6 @@ Layout
specific information. It contains the base clock, GPIO and device definitions
to get the system running.
- plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
-
plat-s5p is for s5p specific builds, and contains common support for the
S5P specific systems. Not all S5Ps use all the features in this directory
due to differences in the hardware.