summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt')
-rw-r--r--Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt33
1 files changed, 33 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
new file mode 100644
index 000000000000..10bd35f9207f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
@@ -0,0 +1,33 @@
+Hisilicon Hip06 Low Pin Count device
+ Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which
+ provides I/O access to some legacy ISA devices.
+ Hip06 is based on arm64 architecture where there is no I/O space. So, the
+ I/O ports here are not CPU addresses, and there is no 'ranges' property in
+ LPC device node.
+
+Required properties:
+- compatible: value should be as follows:
+ (a) "hisilicon,hip06-lpc"
+ (b) "hisilicon,hip07-lpc"
+- #address-cells: must be 2 which stick to the ISA/EISA binding doc.
+- #size-cells: must be 1 which stick to the ISA/EISA binding doc.
+- reg: base memory range where the LPC register set is mapped.
+
+Note:
+ The node name before '@' must be "isa" to represent the binding stick to the
+ ISA/EISA binding specification.
+
+Example:
+
+isa@a01b0000 {
+ compatible = "hisilicon,hip06-lpc";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x0 0xa01b0000 0x0 0x1000>;
+
+ ipmi0: bt@e4 {
+ compatible = "ipmi-bt";
+ device_type = "ipmi";
+ reg = <0x01 0xe4 0x04>;
+ };
+};