diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm')
37 files changed, 686 insertions, 452 deletions
diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml index ace3fdaa8396..14023f0a8552 100644 --- a/Documentation/devicetree/bindings/arm/actions.yaml +++ b/Documentation/devicetree/bindings/arm/actions.yaml @@ -11,6 +11,8 @@ maintainers: - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> properties: + $nodename: + const: "/" compatible: oneOf: # The Actions Semi S500 is a quad-core ARM Cortex-A9 SoC. diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index b388c5aa7984..0bc5020b7539 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -10,6 +10,8 @@ maintainers: - Dinh Nguyen <dinguyen@kernel.org> properties: + $nodename: + const: "/" compatible: items: - enum: diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml index 98780a569f22..3ea5f2fdcd96 100644 --- a/Documentation/devicetree/bindings/arm/axxia.yaml +++ b/Documentation/devicetree/bindings/arm/axxia.yaml @@ -10,6 +10,8 @@ maintainers: - Anders Berg <anders.berg@lsi.com> properties: + $nodename: + const: "/" compatible: description: LSI AXM5516 Validation board (Amarillo) items: diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index 17e4f20c8d39..a2c63c8b1d10 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -23,7 +23,7 @@ properties: compatible: items: - const: raspberrypi,bcm2835-firmware - - const: simple-bus + - const: simple-mfd mboxes: $ref: '/schemas/types.yaml#/definitions/phandle' @@ -48,21 +48,44 @@ properties: - compatible - "#clock-cells" + reset: + type: object + + properties: + compatible: + const: raspberrypi,firmware-reset + + "#reset-cells": + const: 1 + description: > + The argument is the ID of the firmware reset line to affect. + + required: + - compatible + - "#reset-cells" + additionalProperties: false required: - compatible - mboxes +additionalProperties: false + examples: - | firmware { - compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; mboxes = <&mailbox>; firmware_clocks: clocks { compatible = "raspberrypi,firmware-clocks"; #clock-cells = <1>; }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; }; ... diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml index 5cd5b36cff2d..5880083ab8d0 100644 --- a/Documentation/devicetree/bindings/arm/bitmain.yaml +++ b/Documentation/devicetree/bindings/arm/bitmain.yaml @@ -10,6 +10,8 @@ maintainers: - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> properties: + $nodename: + const: "/" compatible: items: - enum: diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml index e42ff69d8bfb..21e3515491f4 100644 --- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -220,6 +220,8 @@ then: required: - cpu +unevaluatedProperties: false + examples: # minimum CTI definition. DEVID register used to set number of triggers. - | diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 1222bf1831fa..14cd727d3c4b 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -341,6 +341,8 @@ required: dependencies: rockchip,pmu: [enable-method] +additionalProperties: true + examples: - | cpus { diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml index d9c80b827e9b..849e20518339 100644 --- a/Documentation/devicetree/bindings/arm/digicolor.yaml +++ b/Documentation/devicetree/bindings/arm/digicolor.yaml @@ -10,6 +10,8 @@ maintainers: - Baruch Siach <baruch@tkos.co.il> properties: + $nodename: + const: "/" compatible: const: cnxt,cx92755 diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt deleted file mode 100644 index 75195bee116f..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.txt +++ /dev/null @@ -1,23 +0,0 @@ -Freescale i.MX7ULP Power Management Components ----------------------------------------------- - -The Multi-System Mode Controller (MSMC) is responsible for sequencing -the MCU into and out of all stop and run power modes. Specifically, it -monitors events to trigger transitions between power modes while -controlling the power, clocks, and memories of the MCU to achieve the -power consumption and functionality of that mode. - -The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or -Standby modes for either Cortex family. Run, Wait, and Stop are the -common terms used for the primary operating modes of Kinetis -microcontrollers. - -Required properties: -- compatible: Should be "fsl,imx7ulp-smc1". -- reg: Specifies base physical address and size of the register sets. - -Example: -smc1: smc1@40410000 { - compatible = "fsl,imx7ulp-smc1"; - reg = <0x40410000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml new file mode 100644 index 000000000000..3b26040f8f18 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7ULP Power Management Components + +maintainers: + - A.s. Dong <aisheng.dong@nxp.com> + +description: | + The Multi-System Mode Controller (MSMC) is responsible for sequencing + the MCU into and out of all stop and run power modes. Specifically, it + monitors events to trigger transitions between power modes while + controlling the power, clocks, and memories of the MCU to achieve the + power consumption and functionality of that mode. + + The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or + Standby modes for either Cortex family. Run, Wait, and Stop are the + common terms used for the primary operating modes of Kinetis + microcontrollers. + +properties: + compatible: + const: fsl,imx7ulp-smc1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + smc1@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt deleted file mode 100644 index 7d0c7f002401..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt +++ /dev/null @@ -1,16 +0,0 @@ -Freescale i.MX7ULP System Integration Module ----------------------------------------------- -The system integration module (SIM) provides system control and chip configuration -registers. In this module, chip revision information is located in JTAG ID register, -and a set of registers have been made available in DGO domain for SW use, with the -objective to maintain its value between system resets. - -Required properties: -- compatible: Should be "fsl,imx7ulp-sim". -- reg: Specifies base physical address and size of the register sets. - -Example: -sim: sim@410a3000 { - compatible = "fsl,imx7ulp-sim", "syscon"; - reg = <0x410a3000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml new file mode 100644 index 000000000000..526f508cb98d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-sim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7ULP System Integration Module + +maintainers: + - Anson Huang <anson.huang@nxp.com> + +description: | + The system integration module (SIM) provides system control and chip configuration + registers. In this module, chip revision information is located in JTAG ID register, + and a set of registers have been made available in DGO domain for SW use, with the + objective to maintain its value between system resets. + +properties: + compatible: + items: + - const: fsl,imx7ulp-sim + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml new file mode 100644 index 000000000000..528dad4cde3c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/cpuctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon CPU controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + The clock registers and power registers of secondary cores are defined + in CPU controller, especially in HIX5HD2 SoC. + +properties: + compatible: + items: + - const: hisilicon,cpuctrl + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + cpuctrl@a22000 { + compatible = "hisilicon,cpuctrl"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00a22000 0x2000>; + ranges = <0 0x00a22000 0x2000>; + + clock: clock@0 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0 0x2000>; + #clock-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml new file mode 100644 index 000000000000..cba1937aad9a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi3798cv200-perictrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Hi3798CV200 Peripheral Controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + The Hi3798CV200 Peripheral Controller controls peripherals, queries + their status, and configures some functions of peripherals. + +properties: + compatible: + items: + - const: hisilicon,hi3798cv200-perictrl + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: + type: object + +examples: + - | + peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "syscon", "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8a20000 0x1000>; + + phy@850 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x850 0x8>; + #phy-cells = <1>; + clocks = <&crg 42>; + resets = <&crg 0x188 4>; + assigned-clocks = <&crg 42>; + assigned-clock-rates = <100000000>; + hisilicon,fixed-mode = <4>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml new file mode 100644 index 000000000000..6ea6d7ee7a14 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi6220-domain-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Hi6220 domain controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + Hisilicon designs some special domain controllers for mobile platform, + such as: the power Always On domain controller, the Media domain + controller(e.g. codec, G3D ...) and the Power Management domain + controller. + + The compatible names of each domain controller are as follows: + Power Always ON domain controller --> hisilicon,hi6220-aoctrl + Media domain controller --> hisilicon,hi6220-mediactrl + Power Management domain controller --> hisilicon,hi6220-pmctrl + +properties: + compatible: + items: + - enum: + - hisilicon,hi6220-aoctrl + - hisilicon,hi6220-mediactrl + - hisilicon,hi6220-pmctrl + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + ao_ctrl@f7800000 { + compatible = "hisilicon,hi6220-aoctrl", "syscon"; + reg = <0xf7800000 0x2000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + media_ctrl@f4410000 { + compatible = "hisilicon,hi6220-mediactrl", "syscon"; + reg = <0xf4410000 0x1000>; + #clock-cells = <1>; + }; + + pm_ctrl@f7032000 { + compatible = "hisilicon,hi6220-pmctrl", "syscon"; + reg = <0xf7032000 0x1000>; + #clock-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml new file mode 100644 index 000000000000..7378159e61df --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-bootwrapper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bootwrapper boot method + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: Bootwrapper boot method (software protocol on SMP) + +properties: + compatible: + items: + - const: hisilicon,hip04-bootwrapper + + boot-method: + description: | + Address and size of boot method. + [0]: bootwrapper physical address + [1]: bootwrapper size + [2]: relocation physical address + [3]: relocation size + minItems: 1 + maxItems: 2 + +required: + - compatible + - boot-method + +additionalProperties: false +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml new file mode 100644 index 000000000000..60c516a04ad5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-fabric.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Fabric controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: Hisilicon Fabric controller + +properties: + compatible: + items: + - const: hisilicon,hip04-fabric + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml new file mode 100644 index 000000000000..6d5065872809 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/pctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral misc control register + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: Peripheral misc control register + +properties: + compatible: + items: + - const: hisilicon,pctrl + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pctrl@fca09000 { + compatible = "hisilicon,pctrl"; + reg = <0xfca09000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml new file mode 100644 index 000000000000..5a53d433b6f0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/controller/sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon system controller + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + The Hisilicon system controller is used on many Hisilicon boards, it can be + used to assist the slave core startup, reboot the system, etc. + + There are some variants of the Hisilicon system controller, such as HiP01, + Hi3519, Hi6220 system controller, each of them is mostly compatible with the + Hisilicon system controller, but some same registers located at different + offset. In addition, the HiP01 system controller has some specific control + registers for HIP01 SoC family, such as slave core boot. + + The compatible names of each system controller are as follows: + Hisilicon system controller --> hisilicon,sysctrl + HiP01 system controller --> hisilicon,hip01-sysctrl + Hi6220 system controller --> hisilicon,hi6220-sysctrl + Hi3519 system controller --> hisilicon,hi3519-sysctrl + +allOf: + - if: + properties: + compatible: + contains: + const: hisilicon,hi6220-sysctrl + then: + required: + - '#clock-cells' + +properties: + compatible: + oneOf: + - items: + - enum: + - hisilicon,sysctrl + - hisilicon,hi6220-sysctrl + - hisilicon,hi3519-sysctrl + - const: syscon + - items: + - const: hisilicon,hip01-sysctrl + - const: hisilicon,sysctrl + + reg: + maxItems: 1 + + smp-offset: + description: | + offset in sysctrl for notifying slave cpu booting + cpu 1, reg; + cpu 2, reg + 0x4; + cpu 3, reg + 0x8; + If reg value is not zero, cpun exit wfi and go + $ref: /schemas/types.yaml#/definitions/uint32 + + resume-offset: + description: offset in sysctrl for notifying cpu0 when resume + $ref: /schemas/types.yaml#/definitions/uint32 + + reboot-offset: + description: offset in sysctrl for system reboot + $ref: /schemas/types.yaml#/definitions/uint32 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + /* Hisilicon system controller */ + system-controller@802000 { + compatible = "hisilicon,sysctrl", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x802000 0x1000>; + reg = <0x802000 0x1000>; + + smp-offset = <0x31c>; + resume-offset = <0x308>; + reboot-offset = <0x4>; + + clock: clock@0 { + compatible = "hisilicon,hi3620-clock"; + reg = <0 0x10000>; + #clock-cells = <1>; + }; + }; + + /* HiP01 system controller */ + system-controller@10000000 { + compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl"; + reg = <0x10000000 0x1000>; + reboot-offset = <0x4>; + }; + + /* Hi6220 system controller */ + system-controller@f7030000 { + compatible = "hisilicon,hi6220-sysctrl", "syscon"; + reg = <0xf7030000 0x2000>; + #clock-cells = <1>; + }; + + /* Hi3519 system controller */ + system-controller@12010000 { + compatible = "hisilicon,hi3519-sysctrl", "syscon"; + reg = <0x12010000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt deleted file mode 100644 index 8defacc44dd5..000000000000 --- a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt +++ /dev/null @@ -1,14 +0,0 @@ -* Hisilicon Hi3519 System Controller Block - -This bindings use the following binding: -Documentation/devicetree/bindings/mfd/syscon.yaml - -Required properties: -- compatible: "hisilicon,hi3519-sysctrl". -- reg: the register region of this block - -Examples: -sysctrl: system-controller@12010000 { - compatible = "hisilicon,hi3519-sysctrl", "syscon"; - reg = <0x12010000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt deleted file mode 100644 index 10bd35f9207f..000000000000 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt +++ /dev/null @@ -1,33 +0,0 @@ -Hisilicon Hip06 Low Pin Count device - Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which - provides I/O access to some legacy ISA devices. - Hip06 is based on arm64 architecture where there is no I/O space. So, the - I/O ports here are not CPU addresses, and there is no 'ranges' property in - LPC device node. - -Required properties: -- compatible: value should be as follows: - (a) "hisilicon,hip06-lpc" - (b) "hisilicon,hip07-lpc" -- #address-cells: must be 2 which stick to the ISA/EISA binding doc. -- #size-cells: must be 1 which stick to the ISA/EISA binding doc. -- reg: base memory range where the LPC register set is mapped. - -Note: - The node name before '@' must be "isa" to represent the binding stick to the - ISA/EISA binding specification. - -Example: - -isa@a01b0000 { - compatible = "hisilicon,hip06-lpc"; - #address-cells = <2>; - #size-cells = <1>; - reg = <0x0 0xa01b0000 0x0 0x1000>; - - ipmi0: bt@e4 { - compatible = "ipmi-bt"; - device_type = "ipmi"; - reg = <0x01 0xe4 0x04>; - }; -}; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt deleted file mode 100644 index a97f643e7d1c..000000000000 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ /dev/null @@ -1,319 +0,0 @@ -Hisilicon Platforms Device Tree Bindings ----------------------------------------------------- -Hi3660 SoC -Required root node properties: - - compatible = "hisilicon,hi3660"; - -HiKey960 Board -Required root node properties: - - compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; - -Hi3670 SoC -Required root node properties: - - compatible = "hisilicon,hi3670"; - -HiKey970 Board -Required root node properties: - - compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; - -Hi3798cv200 SoC -Required root node properties: - - compatible = "hisilicon,hi3798cv200"; - -Hi3798cv200 Poplar Board -Required root node properties: - - compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200"; - -Hi4511 Board -Required root node properties: - - compatible = "hisilicon,hi3620-hi4511"; - -Hi6220 SoC -Required root node properties: - - compatible = "hisilicon,hi6220"; - -HiKey Board -Required root node properties: - - compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; - -HiP01 ca9x2 Board -Required root node properties: - - compatible = "hisilicon,hip01-ca9x2"; - -HiP04 D01 Board -Required root node properties: - - compatible = "hisilicon,hip04-d01"; - -HiP05 D02 Board -Required root node properties: - - compatible = "hisilicon,hip05-d02"; - -HiP06 D03 Board -Required root node properties: - - compatible = "hisilicon,hip06-d03"; - -HiP07 D05 Board -Required root node properties: - - compatible = "hisilicon,hip07-d05"; - -Hisilicon system controller - -Required properties: -- compatible : "hisilicon,sysctrl" -- reg : Register address and size - -Optional properties: -- smp-offset : offset in sysctrl for notifying slave cpu booting - cpu 1, reg; - cpu 2, reg + 0x4; - cpu 3, reg + 0x8; - If reg value is not zero, cpun exit wfi and go -- resume-offset : offset in sysctrl for notifying cpu0 when resume -- reboot-offset : offset in sysctrl for system reboot - -Example: - - /* for Hi3620 */ - sysctrl: system-controller@fc802000 { - compatible = "hisilicon,sysctrl"; - reg = <0xfc802000 0x1000>; - smp-offset = <0x31c>; - resume-offset = <0x308>; - reboot-offset = <0x4>; - }; - ------------------------------------------------------------------------ -Hisilicon Hi3798CV200 Peripheral Controller - -The Hi3798CV200 Peripheral Controller controls peripherals, queries -their status, and configures some functions of peripherals. - -Required properties: -- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon" - and "simple-mfd". -- reg: Register address and size of Peripheral Controller. -- #address-cells: Should be 1. -- #size-cells: Should be 1. - -Examples: - - perictrl: peripheral-controller@8a20000 { - compatible = "hisilicon,hi3798cv200-perictrl", "syscon", - "simple-mfd"; - reg = <0x8a20000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - }; - ------------------------------------------------------------------------ -Hisilicon Hi6220 system controller - -Required properties: -- compatible : "hisilicon,hi6220-sysctrl" -- reg : Register address and size -- #clock-cells: should be set to 1, many clock registers are defined - under this controller and this property must be present. - -Hisilicon designs this controller as one of the system controllers, -its main functions are the same as Hisilicon system controller, but -the register offset of some core modules are different. - -Example: - /*for Hi6220*/ - sys_ctrl: sys_ctrl@f7030000 { - compatible = "hisilicon,hi6220-sysctrl", "syscon"; - reg = <0x0 0xf7030000 0x0 0x2000>; - #clock-cells = <1>; - }; - - -Hisilicon Hi6220 Power Always ON domain controller - -Required properties: -- compatible : "hisilicon,hi6220-aoctrl" -- reg : Register address and size -- #clock-cells: should be set to 1, many clock registers are defined - under this controller and this property must be present. - -Hisilicon designs this system controller to control the power always -on domain for mobile platform. - -Example: - /*for Hi6220*/ - ao_ctrl: ao_ctrl@f7800000 { - compatible = "hisilicon,hi6220-aoctrl", "syscon"; - reg = <0x0 0xf7800000 0x0 0x2000>; - #clock-cells = <1>; - }; - - -Hisilicon Hi6220 Media domain controller - -Required properties: -- compatible : "hisilicon,hi6220-mediactrl" -- reg : Register address and size -- #clock-cells: should be set to 1, many clock registers are defined - under this controller and this property must be present. - -Hisilicon designs this system controller to control the multimedia -domain(e.g. codec, G3D ...) for mobile platform. - -Example: - /*for Hi6220*/ - media_ctrl: media_ctrl@f4410000 { - compatible = "hisilicon,hi6220-mediactrl", "syscon"; - reg = <0x0 0xf4410000 0x0 0x1000>; - #clock-cells = <1>; - }; - - -Hisilicon Hi6220 Power Management domain controller - -Required properties: -- compatible : "hisilicon,hi6220-pmctrl" -- reg : Register address and size -- #clock-cells: should be set to 1, some clock registers are define - under this controller and this property must be present. - -Hisilicon designs this system controller to control the power management -domain for mobile platform. - -Example: - /*for Hi6220*/ - pm_ctrl: pm_ctrl@f7032000 { - compatible = "hisilicon,hi6220-pmctrl", "syscon"; - reg = <0x0 0xf7032000 0x0 0x1000>; - #clock-cells = <1>; - }; - - -Hisilicon Hi6220 SRAM controller - -Required properties: -- compatible : "hisilicon,hi6220-sramctrl", "syscon" -- reg : Register address and size - -Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several -SRAM banks for power management, modem, security, etc. Further, use "syscon" -managing the common sram which can be shared by multiple modules. - -Example: - /*for Hi6220*/ - sram: sram@fff80000 { - compatible = "hisilicon,hi6220-sramctrl", "syscon"; - reg = <0x0 0xfff80000 0x0 0x12000>; - }; - ------------------------------------------------------------------------ -Hisilicon HiP01 system controller - -Required properties: -- compatible : "hisilicon,hip01-sysctrl" -- reg : Register address and size - -The HiP01 system controller is mostly compatible with hisilicon -system controller,but it has some specific control registers for -HIP01 SoC family, such as slave core boot, and also some same -registers located at different offset. - -Example: - - /* for hip01-ca9x2 */ - sysctrl: system-controller@10000000 { - compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl"; - reg = <0x10000000 0x1000>; - reboot-offset = <0x4>; - }; - ------------------------------------------------------------------------ -Hisilicon HiP05/HiP06 PCIe-SAS sub system controller - -Required properties: -- compatible : "hisilicon,pcie-sas-subctrl", "syscon"; -- reg : Register address and size - -The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in -HiP05 or HiP06 Soc to implement some basic configurations. - -Example: - /* for HiP05 PCIe-SAS sub system */ - pcie_sas: system_controller@b0000000 { - compatible = "hisilicon,pcie-sas-subctrl", "syscon"; - reg = <0xb0000000 0x10000>; - }; - -Hisilicon HiP05/HiP06 PERI sub system controller - -Required properties: -- compatible : "hisilicon,peri-subctrl", "syscon"; -- reg : Register address and size - -The PERI sub system controller is shared by peripheral controllers in -HiP05 or HiP06 Soc to implement some basic configurations. The peripheral -controllers include mdio, ddr, iic, uart, timer and so on. - -Example: - /* for HiP05 sub peri system */ - peri_c_subctrl: syscon@80000000 { - compatible = "hisilicon,peri-subctrl", "syscon"; - reg = <0x0 0x80000000 0x0 0x10000>; - }; - -Hisilicon HiP05/HiP06 DSA sub system controller - -Required properties: -- compatible : "hisilicon,dsa-subctrl", "syscon"; -- reg : Register address and size - -The DSA sub system controller is shared by peripheral controllers in -HiP05 or HiP06 Soc to implement some basic configurations. - -Example: - /* for HiP05 dsa sub system */ - pcie_sas: system_controller@a0000000 { - compatible = "hisilicon,dsa-subctrl", "syscon"; - reg = <0xa0000000 0x10000>; - }; - ------------------------------------------------------------------------ -Hisilicon CPU controller - -Required properties: -- compatible : "hisilicon,cpuctrl" -- reg : Register address and size - -The clock registers and power registers of secondary cores are defined -in CPU controller, especially in HIX5HD2 SoC. - ------------------------------------------------------------------------ -PCTRL: Peripheral misc control register - -Required Properties: -- compatible: "hisilicon,pctrl" -- reg: Address and size of pctrl. - -Example: - - /* for Hi3620 */ - pctrl: pctrl@fca09000 { - compatible = "hisilicon,pctrl"; - reg = <0xfca09000 0x1000>; - }; - ------------------------------------------------------------------------ -Fabric: - -Required Properties: -- compatible: "hisilicon,hip04-fabric"; -- reg: Address and size of Fabric - ------------------------------------------------------------------------ -Bootwrapper boot method (software protocol on SMP): - -Required Properties: -- compatible: "hisilicon,hip04-bootwrapper"; -- boot-method: Address and size of boot method. - [0]: bootwrapper physical address - [1]: bootwrapper size - [2]: relocation physical address - [3]: relocation size diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml new file mode 100644 index 000000000000..43b8ce2227aa --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/hisilicon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Platforms Device Tree Bindings + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +properties: + $nodename: + const: '/' + + compatible: + oneOf: + - description: Hi3660 based boards. + items: + - const: hisilicon,hi3660-hikey960 + - const: hisilicon,hi3660 + + - description: Hi3670 based boards. + items: + - const: hisilicon,hi3670-hikey970 + - const: hisilicon,hi3670 + + - description: Hi3798cv200 based boards. + items: + - const: hisilicon,hi3798cv200-poplar + - const: hisilicon,hi3798cv200 + + - description: Hi4511 Board + items: + - const: hisilicon,hi3620-hi4511 + + - description: Hi6220 based boards. + items: + - const: hisilicon,hi6220-hikey + - const: hisilicon,hi6220 + + - description: HiP01 based boards. + items: + - const: hisilicon,hip01-ca9x2 + - const: hisilicon,hip01 + + - description: HiP04 D01 Board + items: + - const: hisilicon,hip04-d01 + + - description: HiP05 D02 Board + items: + - const: hisilicon,hip05-d02 + + - description: HiP06 D03 Board + items: + - const: hisilicon,hip06-d03 + + - description: HiP07 D05 Board + items: + - const: hisilicon,hip07-d05 + + - description: SD5203 based boards + items: + - const: H836ASDJ + - const: hisilicon,sd5203 +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml new file mode 100644 index 000000000000..3b36e683bb15 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/hisilicon/low-pin-count.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon HiP06 Low Pin Count device + +maintainers: + - Wei Xu <xuwei5@hisilicon.com> + +description: | + Hisilicon HiP06 SoCs implement a Low Pin Count (LPC) controller, which + provides I/O access to some legacy ISA devices. + HiP06 is based on arm64 architecture where there is no I/O space. So, the + I/O ports here are not CPU addresses, and there is no 'ranges' property in + LPC device node. + +properties: + $nodename: + pattern: '^isa@[0-9a-f]+$' + description: | + The node name before '@' must be "isa" to represent the binding stick + to the ISA/EISA binding specification. + + compatible: + enum: + - hisilicon,hip06-lpc + - hisilicon,hip07-lpc + + reg: + maxItems: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + isa@a01b0000 { + compatible = "hisilicon,hip06-lpc"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xa01b0000 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml index f4f7451e5e8a..f18302efb90e 100644 --- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml +++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml @@ -10,6 +10,8 @@ maintainers: - Linus Walleij <linus.walleij@linaro.org> properties: + $nodename: + const: "/" compatible: oneOf: - items: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 1af30174b2d0..8723dfe34bab 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -47,6 +47,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | pericfg@10003000 { diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml index 1043e4be4fca..c9675c4cdc1b 100644 --- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml +++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml @@ -30,6 +30,8 @@ properties: Specifies the bpmp node that needs to be queried to get operating point data for all CPUs. +additionalProperties: true + examples: - | cpus { diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index 97df36d301c9..693ef3f185a8 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -93,4 +93,6 @@ properties: required: - compatible +additionalProperties: false + ... diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml index 5aae37f1c563..e15fe00aafb2 100644 --- a/Documentation/devicetree/bindings/arm/primecell.yaml +++ b/Documentation/devicetree/bindings/arm/primecell.yaml @@ -33,4 +33,7 @@ properties: contains: const: apb_pclk additionalItems: true + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 6031aee0f5a8..ae6284be9fef 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -73,6 +73,8 @@ description: | foundry 2. properties: + $nodename: + const: "/" compatible: oneOf: - items: diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml index 51cec2b63b04..9672aa0c760d 100644 --- a/Documentation/devicetree/bindings/arm/rda.yaml +++ b/Documentation/devicetree/bindings/arm/rda.yaml @@ -10,6 +10,8 @@ maintainers: - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> properties: + $nodename: + const: "/" compatible: items: - enum: diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml index c9651892710e..cde9c5ec28c8 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml @@ -45,6 +45,9 @@ properties: reg: maxItems: 1 + assigned-clock-parents: true + assigned-clocks: true + '#clock-cells': const: 1 diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml b/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml deleted file mode 100644 index 3b7811804cb4..000000000000 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.yaml +++ /dev/null @@ -1,45 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/samsung/sysreg.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Samsung S5P/Exynos SoC series System Registers (SYSREG) - -maintainers: - - Krzysztof Kozlowski <krzk@kernel.org> - -# Custom select to avoid matching all nodes with 'syscon' -select: - properties: - compatible: - contains: - enum: - - samsung,exynos4-sysreg - - samsung,exynos5-sysreg - required: - - compatible - -properties: - compatible: - allOf: - - items: - - enum: - - samsung,exynos4-sysreg - - samsung,exynos5-sysreg - - const: syscon - - reg: - maxItems: 1 - -examples: - - | - syscon@10010000 { - compatible = "samsung,exynos4-sysreg", "syscon"; - reg = <0x10010000 0x400>; - }; - - syscon@10050000 { - compatible = "samsung,exynos5-sysreg", "syscon"; - reg = <0x10050000 0x5000>; - }; diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml index 9f276bc9efa0..8e711bd202fd 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml @@ -50,6 +50,8 @@ required: - '#size-cells' - dma-ranges +unevaluatedProperties: false + examples: - | mlahb: ahb@38000000 { diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 790e6dd48e34..696a0101ebcc 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -10,6 +10,8 @@ maintainers: - Alexandre Torgue <alexandre.torgue@st.com> properties: + $nodename: + const: "/" compatible: oneOf: - items: diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index e0b3debaee9e..b4d53290c5f0 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -11,6 +11,8 @@ maintainers: - Jonathan Hunter <jonathanh@nvidia.com> properties: + $nodename: + const: "/" compatible: oneOf: - items: diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml index b71a20af5f70..43fd2f8927d0 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -308,6 +308,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + dependencies: "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] |