summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/clock/silabs,si5341.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/clock/silabs,si5341.txt')
-rw-r--r--Documentation/devicetree/bindings/clock/silabs,si5341.txt16
1 files changed, 10 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
index 504cce3abe46..ce55aba0ce22 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5341.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
@@ -24,9 +24,8 @@ it.
The device type, speed grade and revision are determined runtime by probing.
-The driver currently only supports XTAL input mode, and does not support any
-fancy input configurations. They can still be programmed into the chip and
-the driver will leave them "as is".
+The driver currently does not support any fancy input configurations. They can
+still be programmed into the chip and the driver will leave them "as is".
==I2C device node==
@@ -45,9 +44,9 @@ Required properties:
corresponding to inputs. Use a fixed clock for the "xtal" input.
At least one must be present.
- clock-names: One of: "xtal", "in0", "in1", "in2"
-- vdd-supply: Regulator node for VDD
Optional properties:
+- vdd-supply: Regulator node for VDD
- vdda-supply: Regulator node for VDDA
- vdds-supply: Regulator node for VDDS
- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL
@@ -60,7 +59,14 @@ Optional properties:
be initialized, and always performs the soft-reset routine. Since this will
temporarily stop all output clocks, don't do this if the chip is generating
the CPU clock for example.
+- silabs,xaxb-ext-clk: When present, indicates that the XA/XB pins are used
+ in EXTCLK (external reference clock) rather than XTAL (crystal) mode.
- interrupts: Interrupt for INTRb pin.
+- silabs,iovdd-33: When present, indicates that the I2C lines are using 3.3V
+ rather than 1.8V thresholds.
+- vddoX-supply (where X is an output index): Regulator node for VDDO for the
+ specified output. The driver selects the output VDD_SEL setting based on this
+ voltage.
- #address-cells: shall be set to 1.
- #size-cells: shall be set to 0.
@@ -77,8 +83,6 @@ Required child node properties:
- reg: number of clock output.
Optional child node properties:
-- vdd-supply: Regulator node for VDD for this output. The driver selects default
- values for common-mode and amplitude based on the voltage.
- silabs,format: Output format, one of:
1 = differential (defaults to LVDS levels)
2 = low-power (defaults to HCSL levels)