diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt | 19 |
1 files changed, 13 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt index aa67ceb0d4e0..0576b9df0bf2 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt @@ -2,21 +2,28 @@ Required properties: - - compatible : should be "asahi-kasei,ak8975" - - reg : the I2C address of the magnetometer + - compatible : should be "asahi-kasei,ak8975". + - reg : the I2C address of the magnetometer. Optional properties: - - gpios : should be device tree identifier of the magnetometer DRDY pin - - vdd-supply: an optional regulator that needs to be on to provide VDD - - mount-matrix: an optional 3x3 mounting rotation matrix + - gpios : AK8975 has a "Data ready" pin (DRDY) which informs that data + is ready to be read and is possible to listen on it. If used, + this should be active high. Prefer interrupt over this. + + - interrupts : interrupt for DRDY pin. Triggered on rising edge. + + - vdd-supply: an optional regulator that needs to be on to provide VDD. + + - mount-matrix: an optional 3x3 mounting rotation matrix. Example: ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - gpios = <&gpj0 7 0>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&ldo_3v3_gnss>; mount-matrix = "-0.984807753012208", /* x0 */ "0", /* y0 */ |