diff options
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt')
-rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt deleted file mode 100644 index 4d47df1a5c91..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Freescale Layerscape external IRQs - -Some Layerscape SOCs (LS1021A, LS1043A, LS1046A -LS1088A, LS208xA, LX216xA) support inverting -the polarity of certain external interrupt lines. - -The device node must be a child of the node representing the -Supplemental Configuration Unit (SCFG). - -Required properties: -- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq". - "fsl,ls1043a-extirq": for LS1043A, LS1046A. - "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA. -- #interrupt-cells: Must be 2. The first element is the index of the - external interrupt line. The second element is the trigger type. -- #address-cells: Must be 0. -- interrupt-controller: Identifies the node as an interrupt controller -- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in - the SCFG or the External Interrupt Control Register (IRQCR) in - the ISC. -- interrupt-map: Specifies the mapping from external interrupts to GIC - interrupts. -- interrupt-map-mask: Must be <0xffffffff 0>. - -Example: - scfg: scfg@1570000 { - compatible = "fsl,ls1021a-scfg", "syscon"; - reg = <0x0 0x1570000 0x0 0x10000>; - big-endian; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x1570000 0x10000>; - - extirq: interrupt-controller@1ac { - compatible = "fsl,ls1021a-extirq"; - #interrupt-cells = <2>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1ac 4>; - interrupt-map = - <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; - }; - }; - - - interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <&extirq 1 IRQ_TYPE_LEVEL_LOW>; |