diff options
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c')
6 files changed, 136 insertions, 100 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5695.txt b/Documentation/devicetree/bindings/media/i2c/ov5695.txt deleted file mode 100644 index 640a63717d96..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov5695.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Omnivision OV5695 MIPI CSI-2 sensor - -Required Properties: -- compatible: shall be "ovti,ov5695" -- clocks: reference to the xvclk input clock -- clock-names: shall be "xvclk" -- avdd-supply: Analog voltage supply, 2.8 volts -- dovdd-supply: Digital I/O voltage supply, 1.8 volts -- dvdd-supply: Digital core voltage supply, 1.2 volts -- reset-gpios: Low active reset gpio - -The device node shall contain one 'port' child node with an -'endpoint' subnode for its digital output video port, -in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. -The endpoint optional property 'data-lanes' shall be "<1 2>". - -Example: -&i2c7 { - ov5695: camera-sensor@36 { - compatible = "ovti,ov5695"; - reg = <0x36>; - pinctrl-names = "default"; - pinctrl-0 = <&clk_24m_cam>; - - clocks = <&cru SCLK_TESTCLKOUT1>; - clock-names = "xvclk"; - - avdd-supply = <&pp2800_cam>; - dovdd-supply = <&pp1800>; - dvdd-supply = <&pp1250_cam>; - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - - port { - wcam_out: endpoint { - remote-endpoint = <&mipi_in_wcam>; - data-lanes = <1 2>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ov7251.txt b/Documentation/devicetree/bindings/media/i2c/ov7251.txt deleted file mode 100644 index 8281151f7493..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ov7251.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Omnivision 1/7.5-Inch B&W VGA CMOS Digital Image Sensor - -The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor -with an active array size of 640H x 480V. It is programmable through a serial -I2C interface. - -Required Properties: -- compatible: Value should be "ovti,ov7251". -- clocks: Reference to the xclk clock. -- clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock. -- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds - to the hardware pin XSHUTDOWN which is physically active low. -- vdddo-supply: Chip digital IO regulator. -- vdda-supply: Chip analog regulator. -- vddd-supply: Chip digital core regulator. - -The device node shall contain one 'port' child node with a single 'endpoint' -subnode for its digital output video port, in accordance with the video -interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - - &i2c1 { - ... - - ov7251: camera-sensor@60 { - compatible = "ovti,ov7251"; - reg = <0x60>; - - enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_bw_default>; - - clocks = <&clks 200>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - vdddo-supply = <&camera_dovdd_1v8>; - vdda-supply = <&camera_avdd_2v8>; - vddd-supply = <&camera_dvdd_1v2>; - - port { - ov7251_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0>; - remote-endpoint = <&csi0_ep>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml index 359dc08440a8..6829a4aadd22 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml @@ -5,26 +5,41 @@ $id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Omnivision OV5693 CMOS Sensor +title: Omnivision OV5693/OV5695 CMOS Sensors maintainers: - Tommaso Merciai <tommaso.merciai@amarulasolutions.com> description: | - The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS - image sensor that delivers 2592x1944 at 30fps. It provides full-frame, + The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS + image sensors that deliver 2592x1944 at 30fps. It provides full-frame, sub-sampled, and windowed 10-bit MIPI images in various formats via the Serial Camera Control Bus (SCCB) interface. - OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB). - The sensor output is available via CSI-2 serial data output (up to 2-lane). + OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus + (SCCB). The sensor output is available via CSI-2 serial data output (up to + 2-lane). allOf: - $ref: /schemas/media/video-interface-devices.yaml# + - if: + properties: + compatible: + contains: + const: ovti,ov5693 + then: + properties: + port: + properties: + endpoint: + required: + - link-frequencies properties: compatible: - const: ovti,ov5693 + enum: + - ovti,ov5693 + - ovti,ov5695 reg: maxItems: 1 @@ -34,6 +49,9 @@ properties: System input clock (aka XVCLK). From 6 to 27 MHz. maxItems: 1 + clock-names: + const: xvclk + dovdd-supply: description: Digital I/O voltage supply, 1.8V. @@ -72,7 +90,6 @@ properties: required: - data-lanes - - link-frequencies required: - compatible diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml new file mode 100644 index 000000000000..2e5187acbbb8 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV7251 Image Sensor + +description: + The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor + with an active array size of 640H x 480V. It is programmable through a serial + I2C interface. + +maintainers: + - Todor Tomov <todor.too@gmail.com> + +properties: + compatible: + const: ovti,ov7251 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + clock-names: + const: xclk + + clock-frequency: + description: Frequency of the xclk clock in Hz. + + vdda-supply: + description: Analog voltage supply, 2.8 volts + + vddd-supply: + description: Digital core voltage supply, 1.2 volts + + vdddo-supply: + description: Digital I/O voltage supply, 1.8 volts + + enable-gpios: + maxItems: 1 + description: + Reference to the GPIO connected to the XSHUTDOWN pin, if any. Polarity + is GPIO_ACTIVE_HIGH. + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maximum: 1 + + data-lanes: + maxItems: 1 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - vdddo-supply + - vdda-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov7251"; + reg = <0x3c>; + clocks = <&clks 1>; + clock-frequency = <24000000>; + vdddo-supply = <&ov7251_vdddo_1v8>; + vdda-supply = <&ov7251_vdda_2v8>; + vddd-supply = <&ov7251_vddd_1v5>; + enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + + port { + ov7251_ep: endpoint { + remote-endpoint = <&csi0_ep>; + clock-lanes = <1>; + data-lanes = <0>; + link-frequencies = /bits/ 64 <240000000 319200000>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml index ffccf5f3c9e3..642f9b15d359 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml @@ -54,6 +54,7 @@ properties: port: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false properties: endpoint: diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml index c5cab549ee8e..1c476b635b69 100644 --- a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml @@ -69,6 +69,7 @@ properties: properties: port@0: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Input port properties: @@ -89,6 +90,7 @@ properties: port@1: $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Output port properties: |