diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
5 files changed, 81 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt index 86446074e206..a92acf1dd491 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt @@ -37,7 +37,7 @@ syscon as a means to arbitrate access. [0] http://www.intel.com/design/chipsets/industry/25128901.pdf [1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4 -[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf +[2] https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf [3] https://en.wikipedia.org/wiki/Super_I/O Required properties diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt deleted file mode 100644 index c4a83e364cb6..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Device tree bindings for Atmel Timer Counter Blocks -- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon". - <chip> can be "at91rm9200" or "at91sam9x5" -- reg: Should contain registers location and length -- #address-cells: has to be 1 -- #size-cells: has to be 0 -- interrupts: Should contain all interrupts for the TC block - Note that you can specify several interrupt cells if the TC - block has one interrupt per channel. -- clock-names: tuple listing input clock names. - Required elements: "t0_clk", "slow_clk" - Optional elements: "t1_clk", "t2_clk" -- clocks: phandles to input clocks. - -The TCB can expose multiple subdevices: - * a timer - - compatible: Should be "atmel,tcb-timer" - - reg: Should contain the TCB channels to be used. If the - counter width is 16 bits (at91rm9200-tcb), two consecutive - channels are needed. Else, only one channel will be used. - -Examples: - -One interrupt per TC block: - tcb0: timer@fff7c000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfff7c000 0x100>; - interrupts = <18 4>; - clocks = <&tcb0_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - -One interrupt per TC channel in a TC block: - tcb1: timer@fffdc000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfffdc000 0x100>; - interrupts = <26 4>, <27 4>, <28 4>; - clocks = <&tcb1_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - }; - - diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index 857af982c88f..bab0d0e66cb3 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -1,8 +1,8 @@ * Dialog DA9062 Power Management Integrated Circuit (PMIC) Product information for the DA9062 and DA9061 devices can be found here: -- http://www.dialog-semiconductor.com/products/da9062 -- http://www.dialog-semiconductor.com/products/da9061 +- https://www.dialog-semiconductor.com/products/da9062 +- https://www.dialog-semiconductor.com/products/da9061 The DA9062 PMIC consists of: diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 19bdaf781853..049ec2ffc7f9 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -38,12 +38,15 @@ properties: - allwinner,sun8i-h3-system-controller - allwinner,sun8i-v3s-system-controller - allwinner,sun50i-a64-system-controller + - microchip,sparx5-cpu-syscon + - mstar,msc313-pmsleep - const: syscon - contains: const: syscon - additionalItems: true + minItems: 2 + maxItems: 4 # Should be enough reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml new file mode 100644 index 000000000000..03d0a232c75e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI J721e System Controller Registers R/W Device Tree Bindings + +description: | + This represents the Control Module registers (CTRL_MMR0) on the SoC. + System controller node represents a register region containing a set + of miscellaneous registers. The registers are not cohesive enough to + represent as any specific type of device. The typical use-case is + for some other node's driver, or platform-specific code, to acquire + a reference to the syscon node (e.g. by phandle, node path, or + search using a specific compatible value), interrogate the node (or + associated OS driver) to determine the location of the registers, + and access the registers directly. + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + - Roger Quadros <rogerq@ti.com + +properties: + compatible: + anyOf: + - items: + - enum: + - ti,j721e-system-controller + - const: syscon + - const: simple-mfd + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +# Optional children + + "^serdes-ln-ctrl@[0-9a-f]+$": + type: object + description: | + This is the SERDES lane control mux. It should follow the bindings + specified in + Documentation/devicetree/bindings/mux/reg-mux.txt + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +unevaluatedProperties: false + +examples: + - | + scm_conf: scm-conf@100000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00100000 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serdes_ln_ctrl: serdes-ln-ctrl@4080 { + compatible = "mmio-mux"; + reg = <0x00004080 0x50>; + }; + }; +... |