diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt')
-rw-r--r-- | Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt | 42 |
1 files changed, 0 insertions, 42 deletions
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt deleted file mode 100644 index 5f68feb9f9d6..000000000000 --- a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings - -Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface -with external MMC, SD and SDIO storage mediums. - -This file documents differences between the core mmc properties described by -mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller -implementation. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "samsung,s3c2410-sdi": for controllers compatible with s3c2410 - - "samsung,s3c2412-sdi": for controllers compatible with s3c2412 - - "samsung,s3c2440-sdi": for controllers compatible with s3c2440 -- reg: register location and length -- interrupts: mmc controller interrupt -- clocks: Should reference the controller clock -- clock-names: Should contain "sdi" - -Required Board Specific Properties: -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". - -Optional Properties: -- bus-width: number of data lines (see mmc.txt) -- cd-gpios: gpio for card detection (see mmc.txt) -- wp-gpios: gpio for write protection (see mmc.txt) - -Example: - - mmc0: mmc@5a000000 { - compatible = "samsung,s3c2440-sdi"; - pinctrl-names = "default"; - pinctrl-0 = <&sdi_pins>; - reg = <0x5a000000 0x100000>; - interrupts = <0 0 21 3>; - clocks = <&clocks PCLK_SDI>; - clock-names = "sdi"; - bus-width = <4>; - cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>; - wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>; - }; |