diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mmc')
8 files changed, 16 insertions, 18 deletions
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index a6c19a6cc99e..3e99801f77d2 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -160,6 +160,12 @@ properties: description: The MIO bank number in which the command and data lines are configured. + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + dependencies: '#clock-cells': [ clock-output-names ] diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml index 3ee758886558..3a8e74894ae0 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml @@ -71,8 +71,8 @@ properties: marvell,xenon-phy-type: $ref: /schemas/types.yaml#/definitions/string enum: - - "emmc 5.1 phy" - - "emmc 5.0 phy" + - emmc 5.1 phy + - emmc 5.0 phy description: | Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set: marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 86c73fd825fd..58ae298cd2fc 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -269,7 +269,7 @@ properties: post-power-on-delay-ms: description: It was invented for MMC pwrseq-simple which could be referred to - mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay + mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index 46eefdd19a2c..3fffa467e4e1 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -91,16 +91,6 @@ properties: should switch dat1 pin to GPIO mode. maxItems: 1 - assigned-clocks: - description: - PLL of the source clock. - maxItems: 1 - - assigned-clock-parents: - description: - parent of source clock, used for HS400 mode to get 400Mhz source clock. - maxItems: 1 - hs400-ds-delay: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt index 5f5c2bec2b8c..66a78eae4dc9 100644 --- a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt @@ -9,7 +9,7 @@ Required properties: Optional properties: - marvell,detect-delay-ms: sets the detection delay timeout in ms. -In addition to the properties described in this docuent, the details +In addition to the properties described in this document, the details described in mmc.txt are supported. Examples: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt index 69edfd4d3922..a9fb0a91245f 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt @@ -5,11 +5,13 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the sdhci-of-at91 driver. Required properties: -- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci". +- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci" + or "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci". - clocks: Phandlers to the clocks. - clock-names: Must be "hclock", "multclk", "baseclk" for "atmel,sama5d2-sdhci". Must be "hclock", "multclk" for "microchip,sam9x60-sdhci". + Must be "hclock", "multclk" for "microchip,sam9x7-sdhci". Optional properties: - assigned-clocks: The same with "multclk". diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 6da28e630577..80141eb7fc6b 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -215,7 +215,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> sdhc_2: mmc@8804000 { compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; @@ -232,7 +232,7 @@ examples: iommus = <&apps_smmu 0x4a0 0x0>; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; - power-domains = <&rpmhpd SM8250_CX>; + power-domains = <&rpmhpd RPMHPD_CX>; operating-points-v2 = <&sdhc2_opp_table>; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 57d077c0b7c1..7a0e9dcdc444 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -95,7 +95,7 @@ while in suspend. | card | -- CIRQ --> | hsmmc | -- IRQ --> | CPU | ------ ------- ----- -In suspend the fclk is off and the module is disfunctional. Even register reads +In suspend the fclk is off and the module is dysfunctional. Even register reads will fail. A small logic in the host will request fclk restore, when an external event is detected. Once the clock is restored, the host detects the event normally. Since am33xx doesn't have this line it never wakes from |