diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/broadcom-bluetooth.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/broadcom-bluetooth.txt | 56 |
1 files changed, 0 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt deleted file mode 100644 index a7d57ba5f2ac..000000000000 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ /dev/null @@ -1,56 +0,0 @@ -Broadcom Bluetooth Chips ---------------------- - -This documents the binding structure and common properties for serial -attached Broadcom devices. - -Serial attached Broadcom devices shall be a child node of the host UART -device the slave device is attached to. - -Required properties: - - - compatible: should contain one of the following: - * "brcm,bcm20702a1" - * "brcm,bcm4329-bt" - * "brcm,bcm4330-bt" - * "brcm,bcm43438-bt" - * "brcm,bcm4345c5" - * "brcm,bcm43540-bt" - * "brcm,bcm4335a0" - -Optional properties: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - - shutdown-gpios: GPIO specifier, used to enable the BT module - - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor. - deprecated, replaced by interrupts and - "host-wakeup" interrupt-names - - clocks: 1 or 2 clocks as defined in clock-names below, in that order - - clock-names: names for clock inputs, matching the clocks given - - "extclk": deprecated, replaced by "txco" - - "txco": external reference clock (not a standalone crystal) - - "lpo": external low power 32.768 kHz clock - - vbat-supply: phandle to regulator supply for VBAT - - vddio-supply: phandle to regulator supply for VDDIO - - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array - - sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S - - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps - - pcm-frame-type: short, long - - pcm-sync-mode: slave, master - - pcm-clock-mode: slave, master - - interrupts: must be one, used to wakeup the host processor - - interrupt-names: must be "host-wakeup" - -Example: - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <921600>; - brcm,bt-pcm-int-params = [01 02 00 01 01]; - }; -}; |