diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/can/c_can.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/can/c_can.txt | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt deleted file mode 100644 index 2d504256b0d8..000000000000 --- a/Documentation/devicetree/bindings/net/can/c_can.txt +++ /dev/null @@ -1,65 +0,0 @@ -Bosch C_CAN/D_CAN controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible : Should be "bosch,c_can" for C_CAN controllers and - "bosch,d_can" for D_CAN controllers. - Can be "ti,dra7-d_can", "ti,am3352-d_can" or - "ti,am4372-d_can". -- reg : physical base address and size of the C_CAN/D_CAN - registers map -- interrupts : property with a value describing the interrupt - number - -The following are mandatory properties for DRA7x, AM33xx and AM43xx SoCs only: -- ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the - instance number - -The following are mandatory properties for Keystone 2 66AK2G SoCs only: -- power-domains : Should contain a phandle to a PM domain provider node - and an args specifier containing the DCAN device id - value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt -- clocks : CAN functional clock phandle. This property is as per the - binding, - Documentation/devicetree/bindings/clock/ti,sci-clk.txt - -Optional properties: -- syscon-raminit : Handle to system control region that contains the - RAMINIT register, register offset to the RAMINIT - register and the CAN instance number (0 offset). - -Note: "ti,hwmods" field is used to fetch the base address and irq -resources from TI, omap hwmod data base during device registration. -Future plan is to migrate hwmod data base contents into device tree -blob so that, all the required data will be used from device tree dts -file. - -Example: - -Step1: SoC common .dtsi file - - dcan1: d_can@481d0000 { - compatible = "bosch,d_can"; - reg = <0x481d0000 0x2000>; - interrupts = <55>; - interrupt-parent = <&intc>; - status = "disabled"; - }; - -(or) - - dcan1: d_can@481d0000 { - compatible = "bosch,d_can"; - ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000>; - interrupts = <55>; - interrupt-parent = <&intc>; - status = "disabled"; - }; - -Step 2: board specific .dts file - - &dcan1 { - status = "okay"; - }; |