diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt deleted file mode 100644 index 065e8bdb957d..000000000000 --- a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt +++ /dev/null @@ -1,75 +0,0 @@ -Properties for an MDIO bus multiplexer controlled by a memory-mapped device - -This is a special case of a MDIO bus multiplexer. A memory-mapped device, -like an FPGA, is used to control which child bus is connected. The mdio-mux -node must be a child of the memory-mapped device. The driver currently only -supports devices with 8, 16 or 32-bit registers. - -Required properties in addition to the generic multiplexer properties: - -- compatible : string, must contain "mdio-mux-mmioreg" - -- reg : integer, contains the offset of the register that controls the bus - multiplexer. The size field in the 'reg' property is the size of - register, and must therefore be 1, 2, or 4. - -- mux-mask : integer, contains an eight-bit mask that specifies which - bits in the register control the actual bus multiplexer. The - 'reg' property of each child mdio-mux node must be constrained by - this mask. - -Example: - -The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes. -For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus. -A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on -BRDCFG1 that control the actual mux. - - /* The FPGA node */ - fpga: board-control@3,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x30>; - ranges = <0 3 0 0x30>; - - mdio-mux-emi2 { - compatible = "mdio-mux-mmioreg", "mdio-mux"; - mdio-parent-bus = <&xmdio0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <9 1>; // BRDCFG1 - mux-mask = <0x6>; // EMI2 - - emi2_slot1: mdio@0 { // Slot 1 XAUI (FM2) - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - phy_xgmii_slot1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <4>; - }; - }; - - emi2_slot2: mdio@2 { // Slot 2 XAUI (FM1) - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - phy_xgmii_slot2: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - }; - }; - }; - }; - - /* The parent MDIO bus. */ - xmdio0: mdio@f1000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,fman-xmdio"; - reg = <0xf1000 0x1000>; - interrupts = <100 1 0 0>; - }; |