summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/nfc/trf7970a.txt')
-rw-r--r--Documentation/devicetree/bindings/net/nfc/trf7970a.txt10
1 files changed, 2 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index c627bbb3009e..60c833d62181 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -13,14 +13,10 @@ Optional SoC Specific Properties:
- pinctrl-names: Contains only one value - "default".
- pintctrl-0: Specifies the pin control groups used for this controller.
- autosuspend-delay: Specify autosuspend delay in milliseconds.
-- vin-voltage-override: Specify voltage of VIN pin in microvolts.
- irq-status-read-quirk: Specify that the trf7970a being used has the
"IRQ Status Read" erratum.
- en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF"
erratum.
-- t5t-rmb-extra-byte-quirk: Specify that the trf7970a has the erratum
- where an extra byte is returned by Read Multiple Block commands issued
- to Type 5 tags.
- vdd-io-supply: Regulator specifying voltage for vdd-io
- clock-frequency: Set to specify that the input frequency to the trf7970a is 13560000Hz or 27120000Hz
@@ -37,15 +33,13 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
spi-max-frequency = <2000000>;
interrupt-parent = <&gpio2>;
interrupts = <14 0>;
- ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
- <&gpio2 5 GPIO_ACTIVE_LOW>;
+ ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
+ <&gpio2 5 GPIO_ACTIVE_HIGH>;
vin-supply = <&ldo3_reg>;
- vin-voltage-override = <5000000>;
vdd-io-supply = <&ldo2_reg>;
autosuspend-delay = <30000>;
irq-status-read-quirk;
en2-rf-quirk;
- t5t-rmb-extra-byte-quirk;
clock-frequency = <27120000>;
status = "okay";
};