diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt | 48 |
1 files changed, 0 insertions, 48 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt deleted file mode 100644 index aaaeeb5f935b..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Qualcomm Atheros ath9k wireless devices - -This node provides properties for configuring the ath9k wireless device. The -node is expected to be specified as a child node of the PCI controller to -which the wireless chip is connected. - -Required properties: -- compatible: For PCI and PCIe devices this should be an identifier following - the format as defined in "PCI Bus Binding to Open Firmware" - Revision 2.1. One of the possible formats is "pciVVVV,DDDD" - where VVVV is the PCI vendor ID and DDDD is PCI device ID. - Typically QCA's PCI vendor ID 168c is used while the PCI device - ID depends on the chipset - see the following (possibly - incomplete) list: - - 0023 for AR5416 - - 0024 for AR5418 - - 0027 for AR9160 - - 0029 for AR9220 and AR9223 - - 002a for AR9280 and AR9283 - - 002b for AR9285 - - 002c for AR2427 - - 002d for AR9227 - - 002e for AR9287 - - 0030 for AR9380, AR9381 and AR9382 - - 0032 for AR9485 - - 0033 for AR9580 and AR9590 - - 0034 for AR9462 - - 0036 for AR9565 - - 0037 for AR9485 -- reg: Address and length of the register set for the device. - -Optional properties: -- qca,no-eeprom: Indicates that there is no physical EEPROM connected to the - ath9k wireless chip (in this case the calibration / - EEPROM data will be loaded from userspace using the - kernel firmware loader). - -The MAC address will be determined using the optional properties defined in -net/ethernet.txt. - -In this example, the node is defined as child node of the PCI controller: -&pci0 { - wifi@168c,002d { - compatible = "pci168c,002d"; - reg = <0x7000 0 0 0 0x1000>; - qca,no-eeprom; - }; -}; |