diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
4 files changed, 52 insertions, 36 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 817794e56227..4f15463611f8 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -106,6 +106,12 @@ properties: phy-mode: $ref: "#/properties/phy-connection-type" + pcs-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies a reference to a node representing a PCS PHY device on a MDIO + bus to link with an external PHY (phy-handle) if exists. + phy-handle: $ref: /schemas/types.yaml#/definitions/phandle description: diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt index c5ab62c39133..8d157f0295a5 100644 --- a/Documentation/devicetree/bindings/net/micrel.txt +++ b/Documentation/devicetree/bindings/net/micrel.txt @@ -45,20 +45,3 @@ Optional properties: In fiber mode, auto-negotiation is disabled and the PHY can only work in 100base-fx (full and half duplex) modes. - - - lan8814,ignore-ts: If present the PHY will not support timestamping. - - This option acts as check whether Timestamping is supported by - hardware or not. LAN8814 phy support hardware tmestamping. - - - lan8814,latency_rx_10: Configures Latency value of phy in ingress at 10 Mbps. - - - lan8814,latency_tx_10: Configures Latency value of phy in egress at 10 Mbps. - - - lan8814,latency_rx_100: Configures Latency value of phy in ingress at 100 Mbps. - - - lan8814,latency_tx_100: Configures Latency value of phy in egress at 100 Mbps. - - - lan8814,latency_rx_1000: Configures Latency value of phy in ingress at 1000 Mbps. - - - lan8814,latency_tx_1000: Configures Latency value of phy in egress at 1000 Mbps. diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index e602761f7b14..b0ebcef6801c 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -13,9 +13,6 @@ description: | This describes the devicetree bindings for AVE ethernet controller implemented on Socionext UniPhier SoCs. -allOf: - - $ref: ethernet-controller.yaml# - properties: compatible: enum: @@ -44,25 +41,13 @@ properties: minItems: 1 maxItems: 4 - clock-names: - oneOf: - - items: # for Pro4 - - const: gio - - const: ether - - const: ether-gb - - const: ether-phy - - const: ether # for others + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro4 - - const: gio - - const: ether - - const: ether # for others + reset-names: true socionext,syscon-phy-mode: $ref: /schemas/types.yaml#/definitions/phandle-array @@ -78,6 +63,42 @@ properties: $ref: mdio.yaml# unevaluatedProperties: false +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro4-ave4 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: gio + - const: ether + - const: ether-gb + - const: ether-phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: ether + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: ether + resets: + maxItems: 1 + reset-names: + const: ether + required: - compatible - reg @@ -90,7 +111,7 @@ required: - reset-names - mdio -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index b8e4894bc634..1aa4c6006cd0 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -26,7 +26,8 @@ Required properties: specified, the TX/RX DMA interrupts should be on that node instead, and only the Ethernet core interrupt is optionally specified here. -- phy-handle : Should point to the external phy device. +- phy-handle : Should point to the external phy device if exists. Pointing + this to the PCS/PMA PHY is deprecated and should be avoided. See ethernet.txt file in the same directory. - xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware @@ -68,6 +69,11 @@ Optional properties: required through the core's MDIO interface (i.e. always, unless the PHY is accessed through a different bus). + - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X + modes, where "pcs-handle" should be used to point + to the PCS/PMA PHY, and "phy-handle" should point to an + external PHY if exists. + Example: axi_ethernet_eth: ethernet@40c00000 { compatible = "xlnx,axi-ethernet-1.00.a"; |