diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml | 80 |
1 files changed, 41 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml index 216b356cd519..0f615ada290a 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -4,12 +4,12 @@ $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT7986 Pin Controller +title: MediaTek MT7986 Pin Controller maintainers: - Sean Wang <sean.wang@kernel.org> -description: |+ +description: The MediaTek's MT7986 Pin controller is used to control SoC pins. properties: @@ -37,15 +37,15 @@ properties: "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. gpio-ranges: minItems: 1 maxItems: 5 - description: | + description: GPIO valid number range. interrupt-controller: true @@ -57,7 +57,7 @@ properties: const: 2 allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -72,7 +72,7 @@ patternProperties: additionalProperties: false patternProperties: - '.*mux.*': + '^.*mux.*$': type: object additionalProperties: false description: | @@ -81,7 +81,7 @@ patternProperties: The following table shows the effective values of "group", "function" properties and chip pinout pins - groups function pins (in pin#) + groups function pins (in pin#) --------------------------------------------------------------------- "watchdog" "watchdog" 0 "wifi_led" "led" 1, 2 @@ -97,8 +97,9 @@ patternProperties: "pwm1_0" "pwm" 22, "snfi" "flash" 23, 24, 25, 26, 27, 28 "spi1_2" "spi" 29, 30, 31, 32 - "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, - 31, 32 + "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32 + "spi1_1" "spi" 23, 24, 25, 26 "uart1_2_rx_tx" "uart" 29, 30 "uart1_2_cts_rts" "uart" 31, 32 @@ -115,8 +116,9 @@ patternProperties: "pcie_pereset" "pcie" 41 "uart1" "uart" 42, 43, 44, 45 "uart2" "uart" 46, 47, 48, 49 - "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 57, - 59, 60, 61 + "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61 + "pcm" "audio" 62, 63, 64, 65 "i2s" "audio" 62, 63, 64, 65 "switch_int" "eth" 66 @@ -126,21 +128,20 @@ patternProperties: "wf_dbdc" "wifi" 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85 - $ref: "/schemas/pinctrl/pinmux-node.yaml" + $ref: /schemas/pinctrl/pinmux-node.yaml properties: function: - description: | + description: A string containing the name of the function to mux to the group. There is no "audio", "pcie" functions on mt7986b, you can only use those functions on mt7986a. enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart, watchdog, wifi] groups: - description: | + description: An array of strings. Each string contains the name of a group. - There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", - and "i2s" groups on mt7986b, you can only use those groups on - mt7986a. + There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", and + "i2s" groups on mt7986b, you can only use those groups on mt7986a. required: - function - groups @@ -255,32 +256,33 @@ patternProperties: items: enum: [wf_2g, wf_5g, wf_dbdc] maxItems: 3 - '.*conf.*': + '^.*conf.*$': type: object additionalProperties: false - description: | + description: pinconf configuration nodes. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pins: - description: | - An array of strings. Each string contains the name of a pin. - There is no PIN 41 to PIN 65 above on mt7686b, you can only use - those pins on mt7986a. + description: + An array of strings. Each string contains the name of a pin. There + is no PIN 41 to PIN 65 above on mt7686b, you can only use those + pins on mt7986a. items: enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7, - GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14, - GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS, - SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS, - SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, - UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD, - UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS, - UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2, - EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6, - EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX, - PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO, + GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, + GPIO_14, GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, + SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK, + SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI, + SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD, + UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD, UART1_CTS, + UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS, UART2_RTS, + EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2, EMMC_DATA_3, + EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6, EMMC_DATA_7, + EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX, PCM_DRX, + PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO, WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK, WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0, WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9, @@ -297,7 +299,7 @@ patternProperties: - type: boolean description: normal pull up. - enum: [100, 101, 102, 103] - description: | + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in dt-bindings/pinctrl/mt65xx.h. @@ -306,7 +308,7 @@ patternProperties: - type: boolean description: normal pull down. - enum: [100, 101, 102, 103] - description: | + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in dt-bindings/pinctrl/mt65xx.h. |