diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml | 103 |
1 files changed, 41 insertions, 62 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index ab4a2b4cfda2..3b79f5be860b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MSM8226 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MSM8226 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8226 SoC. properties: compatible: @@ -21,38 +20,32 @@ properties: description: Specifies the base address and size of the TLMM register space maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + "#gpio-cells": true + gpio-ranges: true gpio-reserved-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8226-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8226-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8226-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -71,65 +64,51 @@ patternProperties: Specify the alternative function to be configured for the specified pins. Functions are only valid for gpio pins. enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. + blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, sdc3, + wlan ] bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true + input-enable: true output-high: true - output-low: true required: - pins - - function additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8226-pinctrl"; - reg = <0xfd510000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 117>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - - serial-pins { - pins = "gpio8", "gpio9"; - function = "blsp_uart3"; - drive-strength = <8>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8226-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + serial-state { + pins = "gpio8", "gpio9"; + function = "blsp_uart3"; + drive-strength = <8>; + bias-disable; }; + }; |