diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml new file mode 100644 index 000000000000..b40f6dc6adae --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7180-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC. + +properties: + compatible: + const: qcom,sc7180-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: west + - const: north + - const: south + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 60 + + gpio-line-names: + maxItems: 119 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7180-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7180-tlmm-state" + additionalProperties: false + +$defs: + qcom-sc7180-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_tsens, + atest_tsens2, atest_usb1, atest_usb10, atest_usb11, + atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, + cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx, + jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync, + mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, + mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, PLL_BIST, + pll_bypassnl, pll_reset, prng_rosc, qdss, qdss_cti, + qlink_enable, qlink_request, qspi_clk, qspi_cs, qspi_data, + qup00, qup01, qup02_i2c, qup02_uart, qup03, qup04_i2c, + qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, qup12, + qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, sdc2_tb, + sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, usb_phy, vfr_1, + _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3500000 { + compatible = "qcom,sc7180-pinctrl"; + reg = <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03d00000 0x300000>; + reg-names = "west", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 120>; + wakeup-parent = <&pdc>; + + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio117"; + function = "dp_hot"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { + spi-pins { + pins = "gpio53", "gpio54", "gpio55"; + function = "qup15"; + }; + + cs-pins { + pins = "gpio56"; + function = "gpio"; + }; + }; + }; |