diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt | 176 |
1 files changed, 0 insertions, 176 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt deleted file mode 100644 index 7462e3743c68..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt +++ /dev/null @@ -1,176 +0,0 @@ -Qualcomm SDM845 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SDM845 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm845-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, adsp_ext, agera_pll, atest_char, atest_tsens, - atest_tsens2, atest_usb1, atest_usb10, atest_usb11, - atest_usb12, atest_usb13, atest_usb2, atest_usb20, - atest_usb21, atest_usb22, atest_usb23, audio_ref, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, - ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, - gcc_gp2, gcc_gp3, jitter_bist, ldo_en, ldo_update, - lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, - mdp_vsync2, mdp_vsync3, mss_lte, nav_pps, pa_indicator, - pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl, - pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, - qdss, qlink_enable, qlink_request, qua_mi2s, qup0, qup1, - qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, qup4, - qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, - qspi_clk, qspi_cs, qspi_data, sd_write, sdc4_clk, sdc4_cmd, - sdc4_data, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu_ch0, - tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, - tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, - tsif2_clk, tsif2_data, tsif2_en, tsif2_error, tsif2_sync, - uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, - uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, - vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, - wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3400000 { - compatible = "qcom,sdm845-pinctrl"; - reg = <0x03400000 0xc00000>; - interrupts = <GIC_SPI 208 0>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - qup9_active: qup9-active { - mux { - pins = "gpio4", "gpio5"; - function = "qup9"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; |