diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml new file mode 100644 index 000000000000..c9627777ceb3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm845-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM845 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDM845 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdm845-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm845-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm845-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm845-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, + atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13, + atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23, + audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update, + lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0, + pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable, + qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0, + qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, + qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, + sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu, + spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en, + tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@3400000 { + compatible = "qcom,sdm845-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc_intc>; + + cci0-default-state { + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; + }; + + cam0-default-state { + rst-pins { + pins = "gpio9"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio13"; + function = "cam_mclk"; + + drive-strength = <16>; + bias-disable; + }; + }; + }; |