diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt deleted file mode 100644 index f488b0f77406..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt +++ /dev/null @@ -1,105 +0,0 @@ - Binding for Xilinx Zynq Pinctrl - -Required properties: -- compatible: "xlnx,zynq-pinctrl" -- syscon: phandle to SLCR -- reg: Offset and length of pinctrl space in SLCR - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Zynq's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, slew rate, etc. - -Each configuration node can consist of multiple nodes describing the pinmux and -pinconf options. Those nodes can be pinmux nodes or pinconf nodes. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Required properties for pinmux nodes are: - - groups: A list of pinmux groups. - - function: The name of a pinmux function to activate for the specified set - of groups. - -Required properties for configuration nodes: -One of: - - pins: a list of pin names - - groups: A list of pinmux groups. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinmux subnode: - groups, function - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinconf subnode: - groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate, - low-power-disable, low-power-enable - - Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast - respectively. - - Valid values for groups are: - ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp, - qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp - spi0_2_grp, - spi0_X_ssY (X=0..2, Y=0..2), spi1_0_grp - spi1_3_grp, - spi1_X_ssY (X=0..3, Y=0..2), sdio0_0_grp - sdio0_2_grp, - sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp, - sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand, - can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp, - uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp, - ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp, - gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp - - Valid values for pins are: - MIO0 - MIO53 - - Valid values for function are: - ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1, - spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, sdio0_cd, sdio0_wp, - sdio1, sdio1_pc, sdio1_cd, sdio1_wp, - smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1, - i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1 - -The following driver-specific properties as defined here are valid to specify in -a pin configuration subnode: - - io-standard: Configure the pin to use the selected IO standard according to - this mapping: - 1: LVCMOS18 - 2: LVCMOS25 - 3: LVCMOS33 - 4: HSTL - -Example: - pinctrl0: pinctrl@700 { - compatible = "xlnx,pinctrl-zynq"; - reg = <0x700 0x200>; - syscon = <&slcr>; - - pinctrl_uart1_default: uart1-default { - mux { - groups = "uart1_10_grp"; - function = "uart1"; - }; - - conf { - groups = "uart1_10_grp"; - slew-rate = <0>; - io-standard = <1>; - }; - - conf-rx { - pins = "MIO49"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO48"; - bias-disable; - }; - }; - }; |